Some spaces omitted after conversion from x5

I recently converted my help project from x5 to ver. 7. After
the conversion, some, not all, words display merged together in the
compiled help, but don't appear that way in Design mode or when
previewing the topic. Normally, it happens following a word that is
bold, or hyperlinked. When I look at the html, it appears to be
formatted properly, In the following example the words Option
Management display in bold:
Design/Preview Display - Option Management menu
HTML - <span style="font-weight: bold;">Option
Management</span> menu
Compiled Help - Option Managementmenu
The only way to add the space is to insert a space prior to
the /span tag. Of course, in the case of hyperlinks, this extends
the hyperlink into the blank space. This happens throughout the
project sporadically, and it will take me forever to try and catch
all of these occurrences. Anyone have any ideas on how to fix this?
It also appears to be happening sometimes when I cut/paste from
Word.
Thanks so much for your help - Janet

Yes, I still had the same results after applying the two
patches. However, I installed version 8, and that took care of the
problem. Thanks for the idea!

Similar Messages

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

Some Photos are blank after conversion from Aperture

Library contains 45K photos .. migrated from Aperture. For some reason a large number of the photos have meta data but are blank. Where have they gone?

Partial CLUE ..
Two photos .. appear to be dupes .. but the case of the file NAME is different. The UPPERCASE JPG is blank .. the lowercase .jpg is not.
Ok -- Apple Engineers .. here's a start .. go fix.

Lost Chunks of Content After Conversion from .HLP

I have 26 .HLP files that we converted from .HLP into RoboHelp HTML.
At first glance everything seemed fine. Then we noticed the stylesheets got a little messed up and colours were changed but those were easy enough to fix. Then we noticed that some topics were missing large chunks of data.
I opened a newly created .htm file for a corrupted topic and then opened the old .HLP file and looked at the same topic.
Sometimes indents were converted to numbers such as the following example.
.HLP topic
Line One
     First Line
Line Two
     Second Line
Line Three
     Third Line
Line Four
     Fourth line
.HTM topic file created by RoboHelp by conversion:
Line One
     1.
Line Two
     1.
Line Three
     1.
Line Four
     1.
Here's another example which seemed to vomit when it encountered numbered lists:
My List
I     First
II     Second
III     Third
IV     Fourth
V     Fifth
VI     Sixth
.HTM topic file
My List
1.
2.
3.
4.
5.
6.
So far in one of the projects, I've noticed 50% of the newly created .htm files are missing content.
Has anyone else encountered this? Is there a setting that we missed (hopefully) when we converted from .HLP?

I tried the import again... we had to select "Formatted Text" on the conversion settings and now the lists have the text like they should. A pain to have to redo them all but at least it's fixing them.

Some starter questions after update from pse 10 to 13.

Hello there,
ive just installed pse&pre13 and imported and converterd my cataloge from pse10 to my new pse13.
After some surching for viewing settings zo its looks the same as my old screen i discoverd a couple of things:
1) not al my fototags are converterd in to my new catalog. (very anoying ) probable the program needed some time after opening to make al the tags visible after 20 min it was corrected.
2) even with a i7 4770 cpu and 8bg mem and solidstate hd the new pse 13 freezes for some seconds after change to maps view
3) when i started for a quick look premiere (not the cataloge) it was complaining about a dvd or disk witch it couldend find. It asked for a suitable medium in station E..
cant ignore it or past it except by placing the instaldisk and click on X.
(found the solution in the forum as an answere to somewan else. => rename oldfilm.eax in the newblue folder to .......eaxold => little bug fix)
have anyone also stumbeld on/over this problems?
And more conveniant: wich solution is availeble?
Het bericht is bewerkt door: Peter Kaat

Hi Don,
today I read a lot of other posts in this forum touching this issue.
Sorry, but I'm not a native speaker, maybe that's why I did not find a lot those posts before. After reading all this, there are still some things that are not quite clear to me.
First of all: Crystal Report printing inconsistancies in .NET
Is there a way to get around this? Scanning forms and using them as a backgroundimage...? Are you serious about that?
I read a lot about different registry keys to solve the margin and scaling issue.
We are using
Crystal Reports XI
Visual Studio 2010
Runtime 13.0.9.1312 (before 10.5.0.0)
Which registry key is needed on which system (CR XI and VS2010 are not on the same System)
Do we also have to register a key on the customer systems?
We moved from Runtime 10 to 13 because we had major issues with Windows 8.1. Do you know if these issues still occur? Is there an SP for that?
Thanks in advance,
Mike

Recovering data from Time Capsule after conversion from Snow Leopard to Lion

Had a problem with my iMac, which was running Snow Leopard O/S. Data was backed up on Time Capsule using Time Machine, although recent back-ups had failed (but earlier back-ups had been OK). Apple support determined that I needed to re-install the O/S and they walked me through it. After blowing away all data (believing that once O/S reinstalled, could recover from Time Capsule), the reinstall failed. Took to Apple store, where they installed Lion at my request. Then tried to recover from Time Capsule, but couldn't do so. Sparse file doesn't work (it shows 10GB, which is wrong as it had several hundred GB's before due to lots of photos). Apple Support couldn't solve issue, believes it was corrupted with the last backup. Ultimately recommended that I have professional data recovery service recover data from the iMac hard-drive (as opposed to Time Capsule). Spoke to recovery service recommended by Apple, and it is very expensive (also, given the O/S reinstall, anything they recover will have new file names and no directory structure). They also said getting data off the Time Capsule is even more difficult and expensive to recover. I'm not a happy camper.
I would welcome any thoughts on what to do. FWIW, I live in South Florida and there appear to be lots of data recovery companies locally, but Apple support had said that they have only a few authorized vendors that can do it without voiding warranty, so I'm reluctant to even call them. Thanks. Steve

Your backups may be corrupted.
Try to repair them, via Disk Utility (in your Applications/Utilities folder).
Mount the sparse bundle by opening the TC in the Finder and double-clicking on the sparse bundle. Drag the sparse bundle into Disk Utility's sidebar, and do a +*Repair Disk*+ (not permissions) on it. If it finds errors it can't fix, run it again (and again), until it either fixes them all, or can't fix any more.

Some Photoshop issues after upgrading from CS5 Master to CS5.5 Master

Hello
I'm a bit of a noob when it comes to the Adobe stuff. Not so with PC's
Win 7 SP1 x64 8G RAM etc etc...
I have a CS5.5 Master License and it is the update from CS5 that has thrown a wrench into my works.
I had CS5 MAster Collection happily running along; no problems. I decided to buy the CS5.5 upgrade and I installed it in place.... that is, on top of the CS5 stuff.
Now I have Photoshop problems;
1. The upgrade did not over-write my PS 5 directory... it created a PS5.1 Directory. D'oh! No plugins in PS5.1!! Not what I expected at all. I just wanted it to upgrade. Is it normal for Adobe products to do this (the answer seems to be yes) and if so how do I get my plugins in the new version? It's kind of a pain... I have a lot of photoshop plugins... What do most users here do? Uninstall old versions first? Change the "plugins" path? I don't require the older version of PS5 on my hard drive... but now the plugs are in PS5 and the OS opens PS5.1... whoops!
2. My Photoshop printing broke in both versions 5 and 5.1. I am just using an Epson 3880 and when I try to print in PS I get a message to the effect that the printer is no longer available (it is) and it's the wrong profile... trouble is... the Printer menu item then becomes greyed out... I can't change anything. Can't fix. Does that ring a bell with anyone? This seems to be related to the upgrade. My Lightroom 3.x still prints the exact same photo with the same profile and printer just fine.
So.... If anyone can shed some light on these two specific issues I would really appreciatte it! and with so many pieces (it is a huge Suite) would I be better off un-installing CS5 and then installing CS 5.5? What are the hardcore adobe users thoughts on best practices for upgrades?
Thanks a ton! -- David

1. Yes, Adobe apps always install in new folders.
2. Try the Photoshop forum for Photoshop specific questions.
Most of the apps weren't really upgraded. The .1 releases just added CS services as far as I know.
I just built a new machine and installed InDesign CS5 and then installed the CS5.5 Master Collection. Your needs may vary.
Bob

Every single box is outlined after conversion from CS3 to CS2!!!! Plz HELP!!!

Hi there guys,
I'm quite new to the forum, but I have come through an issue that is weird to me...
See: One of my clients I'm a freelance designer– is an ad agency whose only graphic designer is on marriage vacation.
This guy converted some files from Indesign CS3 to CS2 so I can go on whit the projects while he is out happily just married in Thailand...
The problem is, however, whit every single box, doesn't matter if they are text or image boxes or even empty boxes. Neither if they already had outline or not. They all have somehow come up whit a black outline. And I'm starting to lose my nerves on fixing that...
Moreover, there are some text boxes –footnotes and the like– that contain a web address or an e-mail direction. This "www.xxxxxxxxx.com" and the "[email protected]" stuff is outlined within the text box with the same black line that will disappear only if I type back the thing...
Is this maybe a known issue? Has anyone ever heard or experienced that?
Any workarounds or known fixes or whatever?
Thanks a lot for taking the trouble to read and answer!!!

The outlines around hyperlinks are just visual indicators for you so you'll know they are there (not all hyperlinks show up as URLs) and won't print. You should be able to turn them off in the hyperlinks palette if you want to. If you just re-type the hyperlink text it will no longer be a real hyperlink, if that'st required.
As far as the strokes on everything, I'm not sure. Is it possible there's an object style applied to all of these items and the stroke is now defined in the style. (Does CS2 support object styles? I've forgotten and don't have it on this machine to check). It could also be some sort of translation glitch in the move from CS3 to CS2.

Screenshots distorted after conversion from captivate 1 to captivate 3

Hi,
I have just converted a couple of .cp's that I have created
in the past with Macromedia Captivate (1). As soon as I open them
in Adobe Captivate 3, it starts converting. Then, when I take a
look at the output, some images are distorted : small ( like
3pixels ) horizontal lines appear in the projector file. These
lines only appear on a number of slides, not on all of them.
Strange enough, I cannot see the image distortions when I
work in captivate and edit the slides.
Does anybody know if this can be prevented or am I to do it
all over again ?
Thanks and regards ! :D
Sylvester
edit:typo

You probably need to change your project preferences to use a
higher video quality.
Beyond that, if you still have CP2, you might try opening
both versions and copy/pasting from the old file into the new file.
You can also export the files from the old version and import them
into the new version from disk.

Still unable to edit a word document after conversion from pdf?

I converted a pdf file to a word document but am still unable to edit the word document and save as a newly created word document. please help, thanks.

Hi Disc9,
In order to help you. Let me know which application of Adobe you are using including the version.
Also let me know the complete workflow how you convert the PDF to docx/doc.
Regards.

FRM-13008 after conversion from 6i

First, let me indicate that I am dumb as dirt about Forms, IAS, Java. I am a DBA but have next to zero experience in this area. In a test environment, I have converted all application 6i Forms & Reports to 10G. I have only one problem form to convert that errors when opened with a FRM-13008: 'Cannot find JavaBean with name oracle.forms.demos.uploadclient.FileUploader' .
Now I have read several Forum threads on this plus Metalink notes (including 1072329.6). One of the causes, per that note, is CLASSPATH and FORMSxx_BUILDER_CLASSPATH may be missing references to 1) the java bean class or .jar in the implementation class, 2) the f60all.jar or f90all.jar or 3) the 'forms60\java' or 'forms90\java' directories.
Per 3) above: My 10G IAS installed directory structure does not include a 'forms60' or 'forms90' directory. My directory is simply 'forms'.
Per 1): I copied and extracted the uploadclient.jar such that the resulting classes are located at '[ORACLE_HOME]\forms\java\oracle\forms\java\demos\uploadclient'.
Per 2): In the [ORACLE_HOME]\forms\java directory, I have frmall.jar, but no f60all.jar or f90all.jar.
Folks, I'm totally lost. Any crumbs you can throw me would be appreciated. Did I mention I was dumb as dirt?
Thanks.

I don't see a forms.jar. I do see a frmall.jar. Regardless and based on that last bit of info, in default.env (in my IAS Oracle Home and my developer Oracle Home), I modified CLASSPATH and added FORMS_BUILDER_CLASSPATH to contain c:\[ORACLE_HOME]\forms\java;c:\[ORACLE_HOME]\forms\java\frmall.jar;c:[ORACLE_HOME]\forms\java\UploadClient.jar. The error continues.
The implementation class in the property palette looks correct. I see no spelling or case issues.
Any recommended troubleshooting steps to take?

Procedure failure after conversion of MS SQL 7

I would like you to know anyone has had problems after conversion from MS SQL7 to Oracle 8.0.5 or Oracle 8i.
I have tries using very simple procedure which have failed. Any information will be very helpful.
Pl. get back to me at [email protected]
Thanks,
Jeevan
null

Hi Jeevan,
Please mail [email protected] with details of your issues. We will work to resolve them as quickly as possible.
The Workbench should work for you. Please remember you have a beta version of the SQL Server 7.0 software and we have fixed a lot of issues in the production version.
The production version 1.2.5.0.0 will be available from this site shortly and also from the 8.1.6 release 2 for Windows NT CD.
Regards
John

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

PROBLEM! 1st I synced my iphone to Mac, then deleted photos to make some space, I think I deleted everything from icloud too! Please tell me there is a genius there who can fix this! is there a way to retrieve the photos even after deleted from icloud.

Hi, I know this is stupid, but without going into the how, I deleted important photos and actually backed up my icloud, so I think they are gone completely! I am furious with my self, is there anyway to retrieve this data from some space even if I have to be charged by apple ... just being hopeful...

Photo stream photos are not backed up, and when you delete them from one device, they are also deleted from iCloud and your other devices. If they were in your camera roll when you last back up you device, restoring the backup should recover them. Otherwise, they are, unfortunately, gone.
Also, photo stream photos don't use any of your iCloud storage so deleting them won't free any storage up in your account.
You can't really use iCloud to back up your photos. It's designed to stream them to your devices and share with others, not to back them up. In fact, photo stream photos only remain in iCloud for 30 days. In order to back up your photos, import them to your computer while they are still in your camera roll, as explained here: http://support.apple.com/kb/HT4083. Or, if you have a Mac that is signed into your account with photo stream enabled, and you are using iPhoto '11 9.2.2 or later, go to iPhoto>Preferences>iCloud and check Automatic Import. This will ensure that your photo stream photos are automatically imported to your iPhoto library where they will be safe (especially if you are using Time Machine to back up your Mac).

I deleted pictures from my camera roll using my computer since i didn't have enough space to back up my ipad in my 5 gigs of space. but after deleting a huge amount of pictures. the size of the camera roll is still the same as when i started.

I deleted pictures from my camera roll using my computer since i didn't have enough space to back up my ipad in my 5 gigs of space. but after deleting a huge amount of pictures. the size of the camera roll is still the same as when i started. some of these same pictures are still on my photostream. I deleted some of them -this time from the ipad itself- but the size of the camera roll remains the same. should i have not remeoved them using the computer for the camera roll.

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Some spaces omitted after conversion from x5

Similar Messages

Maybe you are looking for