Some systems doesn't show up in the all systems. why?

Hi
We had a SCCM 2007 sp2 environment before. then we changed the server and installed a fresh SCCM2012.
We use active directory client deployment method. even i tried installing the client from the exe file of ccmsetup.exe
until now 120 systems client has installed successfully but we faced two issues:
1- on some systems ccmsetup process exits after 10-20 seconds!!
2- on some systems even after a successful installation, the system wont show up in the config manager console.
any advise or help?
thanks

Yes, those are client side logs. If the client cannot communicate with the server, there is no way for the server to have information about the client in its logs.
Jason | http://blog.configmgrftw.com | @jasonsandys
Thanks a lot, but I couldn't find any errors. Just in ClientStartupManager.log there is an error :
[----- STARTUP -----] ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
Machine: OA-NEW ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
OS Version: 6.1 Service Pack 1 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
SCCM Client Version: 5.00.7958.1000 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
'RDV' Identity store does not support backup.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
CCM Identity is in sync with Identity stores
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Unable to backup CCM Identity in any Identity stores. (0x8000ffff).
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Deleted Certificate ID from registry successfully
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Client is set to use HTTPS when available. The current state is 224.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
[RegTask] - Executing registration task synchronously.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
[RegTask] - Client is already registered. Exiting.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
Read SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
Evaluated SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
No SMBIOS Changed ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SMBIOS unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SID unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
HWID unchanged ClientIDManagerStartup
12/31/2014 11:01:50 AM 5420 (0x152C)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Windows To Go requires a minimum operating system of Windows 8
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Computed HardwareID=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
Win32_SystemEnclosure.SerialNumber=Chassis Serial Number
Win32_SystemEnclosure.SMBIOSAssetTag=Asset-1234567890
Win32_BaseBoard.SerialNumber=131118928908938
Win32_BIOS.SerialNumber=System Serial Number
Win32_NetworkAdapterConfiguration.MACAddress=BC:EE:7B:9C:BE:8B
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
HardwareID2=6DE60500010000FE
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Mahdi. Ghorbanpour http://yektagostarhezare.ir

Similar Messages

CRIO Doesn't Show Up In The Distributed Systems Manager

All,
Any idea why my cRIO wouldn't show up in the distributed systems manager? I'm running Real Time 3.2.1 and I've already deployed my shared variables. I can see the cRIO through MAX and with my project just fine.
- Ken

Hi Ken,
I have a couple of questions/things we can try:
1. How are you connected to the cRIO? (Crossover, switch, router with DHCP)
2. Are you able to manually add the cRIO by IP Address to My Systems? (Right-click My systems, select Add Systems..., type in the IP Address and select OK.)
3. Are the shared variables hosted on the cRIO? If not, do you see the Shared Variables in the Distributed System Manager?
4. Try enabling CPU Load Monitoring through the cRIO Target Properties in the LabVIEW Project (Right-click cRIO, select Properties, go to Miscellaneous and check Enable CPU Load Monitoring, deploy the settings and reboot the cRIO).
5. If you already had Distributed System Manager, does pressing F5 to refresh help?
Finally, I would like to know what version of Distributed System Manager/LabVIEW you are using.

One of 4 sent messages doesn't show up in the Sent mailbox - why?

Here is a strange thing I noticed just now. Thought it seems email has sometimes not been showing up in the Sent mailbox at other times as well.
I sent an email to somebody.
Using the "Send again" feature I sent it to a 2nd person.
Then I did the same thing to a 3rd person, and noticed the 2nd email wasn't in the Sent box.
Then I did the same thing to a 4th person, and noticed the 3rd email wasn't in the Sent box, but the 2nd mail appeared.
So the Sent box is currently showing 3 emails sent - apparently always not showing the next-to-last one sent.
This is Gmail, and I confirmed directly at Gmail that all 4 emails are in the Sent box. So the mails were all sent, and it appears to be an Apple Mail oddity where some mails are just not appearing up in Sent.
Anybody else seeing this?
I am using OS X 10.10.3.
Thanks,
doug

As a followup, in Mail on my iPhone 6 Plus running iOS 8.3 I do see all 4 sent mails. It's just in Apple Mail where I don't.
doug

HT4997 I want to burn a movie to a dvd with iMovie but idvd doesn't show up in the "share" menu--why? My SuperDrive indicates that my DVD+R can be written to. Please Help.

I just spent a week creating an iMovie and wanted to burn it to a DVD. The instruction tutorial said to go to the "Share" menu and select "iDVD", however there is no "iDVD" listed in that memu. I checked to see that my DVD+R was writeable in my SuperDrive--it is? Why doesn't "idvd" show in the "share" menu? Please help, thank you. Fustrated Mark.

I may have found a way around this issue. I have the old style mouse with a wired usb connection. I've learned from other discussions that by holding down the 'Control' key and pressing the mouse button on an Apple a menu similar to the right-click menu of a PC will appear. When I tried this from the 'Project Library' on iMovie on my iMAC, a menu appears that DOES contain the export to iDVD choice. This choice is still not visible from the 'Share' menu in the menubar. This appears to be some glitch in the Apple software, but my computer is currently formulating the iMovie into the iDVD format. I have my fingers crossed.

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room.

When I plug in my Lacie (thunderbolt) External Drive it doesn't show up on the desktop. I need to move some stuff out of my hard drive to make room. I have very little room left on the hard drive and need to move an iPhoto library.

i have a lacie, and i encrypted it. i had to wipe it, because it kept dropping off over and over and re-logging in. so unencrypted i went.
at some point it wasn't recognized at all. sometimes disk utility would open it, but then it got to the point that it wouldn't recognize it either.
i hadn't realized that the power supply was dysfunctional. but i was able to recover it using disk warrior at the last deep breath it took. the disk itself still works, but not in that housing.

Preview doesn't show up in the capture window

When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

You hit the target CT.
It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
I hope to make some sense here.

Mobile me gallery doesn't show up in the widget

I posted some albums to mobile me through iPhoto. When I tried to put them on the website through iWeb, there were no galleries in the widget menu. Why? Is it because my site is an independent ".com" site versus being a "me.com" site?? Help!

klcwebdesign wrote:
...it still doesn't show up in the widget menu
I dunno what more to suggest, except to say that MobileMe live chat support is now 24/7 — see this announcement:
http://www.apple.com/mobileme/news/2009/04/live-chat-support-247.html
And to answer your previous question, you can simply change the settings and republish. See this iPhoto Help page:

IBook doesn't show up in the Textbook section

Hi Folks,
I recently had my iTextbook approved through the iBookStore (Physics: Fundamentals and Problem Solving), but noticed that it doesn't show up under the Textbook --> Science and Nature section, even when I choose "See All." Does anyone know how to get this moved to the correct section? Thanks much!
Dan

So I've been waiting 10 days now for my iBooks Author textbook to appear. The upload went fine, but as of today, nothing appears on title search.
I've noticed some folks mentioning they were approved through the iBookstore. Does that approval come in an emai? I see no status indicators in iTunes Connect to check on progress of releasing the title.
Can anyone shove me in the right direction?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

My scanner doesn't show up in the"please select a device list" windows 7 - HP7300 all-in-one

In acrobat X-my scanner doesn't show up in the "please select a device list" how do I get it to see my scanner? - windows 7 - HP 7300 all-in-one

In case anyone else finds this thread I did end up getting mine to work (after abut 48 hours of pulling my hair out). The "solution" was simple in my case, but it might have been a coincidence. I turned the wireless off on my phone for a different reason - then I when I turned it back on the device instantly appeared in spotify-desktop! I had already factory reset my phone, so I know that establishing a connection to the wireless was not the problem in the first place. Also, I was able to play music on my phone, so I know that it was hooked up to the wireless (I turned off 3g just to be sure).
But for some reason when I toggled the wireless off then on again - it worked. Go figure.

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itumr dongs come up. How do I get my original itunes library?

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?

Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?

MSI GT 70 ONC: Stereoscopic 3D option doesn't show up in the NVidiaControl panel

Hi,
I have MSI GT 70 ONC Laptop with NVidia 670M (2GB) graphics card. I also have Sony Bravia 3D TV.
I can play 3d movies on laptop and can watch them on my 3d TV using HDMI cable fine although my laptop doesn't have 3d display.
I am trying to use my laptop which doesn't have 3D display but has Graphics card which supports 3D to play 3d games and see them on my 3D TV.
I checked online and found out that I need to change "Stereoscopic 3D" settings in NVidia control panel but Stereoscopic 3D option doesn't show up in the control panel. Very few options are there. I have updated drivers to the latest level but still can't see "Stereoscopic 3D" option in NVidia control panel. So will you be able to help me out what I can do to see the option? Thanks in advance.

I have got an gs70. Exactly the same problem. Unfortunately this hdmi outputs are connected for the intel graphics cards. And intel does not support 3d.
I was actually very angry with MSI. Because they do not mention in the description. They promot just the gtx card. And forgot to mention about the hdmi connection.
Forget the 3d tv. Or you can buy an external mini pci-e graphics card adaptor.
search in google for : EXP GDC Beast Laptop External Independent Video Card Dock

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

Some systems doesn't show up in the all systems. why?

Similar Messages

Maybe you are looking for