Some systems donu00B4t recognize master system in SDCCN administration

Hi everybody,
I have defined all my systems in tx SMSY. I added all of them in SDCCN Administration and check the status with green light result.
The problem is when I define the master system. Three of my system have "No master defined" text, the rest of systems are Ok. There are two CRM (Prod & Qua) and a BW (Prod) with this failure.
Any idea? Is necesary any maintenance in these satellite systems?
Thanks for all.

Hi Pablo,
you could try defining a master system directly in each of the satellite systems via SDCCN->GoTo->Settings->Task-Specific->RFC Destinations->Settings->Display<->Change->Set Master SAP Solution Manager System.
best regards,
-David.

Similar Messages

Early watch alert task not created on satellite system via SDCCN

The task about EWA is not created on satellite system via SDCCN.
The RFC back was created on Solution Manager and the user assigned to it has the following profiles:
S_CUS_CMP (SAP_S_CUS_CMP) Read data
S_CMSREG (SAP_S_CSMREG) -> Central system repository data
S_BDLSM_READ (SAP_S_BDLSM_READ) -> SDCCN data
SAP_SV_FDB_NOTIF_BC_ADMIN -> Service Desk messages
SAP_SUPPDESK_CREATE -> Service Desk messages
I have checked the RFC authorizations and Connection nothing is wrong.
Do you folks have any clue about that issue?
tks,
Re

Hello,
Not really much information to go on. The Maintenance package tasks is intended to schedule the Refresh defintion and services SDCCN tasks. So is this tasks scheduled? Is this taks gettign any errors/warnings in the logs?
The EWA task is created when the refresh service task runs and gets a list of the serivce sessions that need to be
populated.
You can run a refresh services task to see if there are any sessions to pull. If ther are no sessions, it could be a problem in SMSY defintions for the system. if the system is not delared 100% correctly in SMSY you will not get an EWA session populated.
In DSWP in the SOlution is the EWA for the SID red flagged? If so this means the data still needs to be colelcted from the satellite/managed sysetm. Does the installation number of the SID match the one in SMSY? If not you willnot get any sessions.
Is the refresh session actually using the *BACK RFC to the intended Solution Manager ssystem and is it defined as the master in SDCCN RFC destinations?
If you go to SE37 and run TH_SERVER and specify the SM_SIDCLNTnnn_BACK RFC, does it pull the server list?
If so your back RFC is functioning properly and a logon is successful.
Are the service defintions being replaced successfully when the Maintenance Package runs? Are they replaced when an upgrade was done? It could be the service defintions need to be replaced.
But really more information is needed. I have covered off just some of the issues possible.
Regards,
Paul

Unable to open templates from server input form folder and server root folder from some system while the same can be open from others system

Hi,
I am unable to open input scheduled from server root folder and also from input form folder on some system while they can be open from others system.
Please advice.
Thanks in advance

Hi Hengye,
While opening , it dont give any error. When I try to open it , it takes some time to load then nothing happen.However I can open it on other system but not on mine my collegue and user system.
Please advice.
Thanks.

Won't boot from install discs after deleting some system files

I've been looking through the forum and haven't found an answer to my problem - maybe someone can help me out.
I have an aluminum Powerbook G4, 1.67, 1.5 RAM, 10.4.11. I was experiencing the problem with FCE capturing video for about 5 minutes and then freezing, and I read some threads here about how this can be fixed by returning to Quicktime 7.2 and installing it with Pacifist. I did this, but first tried to delete my previous Quicktime version files, and obviously I deleted some system files in the process. That's how my new problem started.
Programs now that do not open - Preview, iTunes, iMovie, FCE, Yahoo, Mail, and Microsoft Messenger. I no longer have my date/time/battery level/airport/bluetooth indicators in my toolbar. The Spotlight icon flashes, but will not open. Also, when opening the System Preferences pane, it opens just for a second or two and then crashes and closes. Safari, airport, and Word all work, though, and I still can access internet.
I tried to re-install OS 10.4 from my black install disc. The computer reads the disc, but after I click the installer icon and then "restart," the computer fails to completely reboot. The disc spins in the drive, I get the Apple, the indicator, and then the screen goes to blue and the disc soon stops spinning. Nothing happens after that. I've tried rebooting by holding down the C key but the same happens. When I hold down the option key, I get to the point where I can choose to boot from the install disc, and then the same thing happens - the blue screen and nothing more. Booting with the shift key held down doesn't work either.
I did just have a repair by Apple - my adaptor plug sparked when inserting it into the outlet, and I had to have the logic board replaced. But the computer seemed to be working fine when I got it back, except for the FCE issue first mentioned. Looks like my good intentions have done me in.
The install disc is about three years old, and is in good condition. It's been in the garage, so could heat or cold affect the readability of the disc?
Does anyone have any suggestions on how I can boot from my install disc and get a fresh install of my OS?

Hi bboross,
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(space between fsck and -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.

After I updated to iOS 8, I noticed that while copying photos to my PC, I see photos being categorized into many folders. I also found some system files in each of the folders containing photos (in the name of Local Disk). Is this usual?

After I updated to iOS 8, I noticed that while copying photos to my PC, I see photos being categorized into many folders now. I also found some system files in each of the folders containing photos (in the name of Local Disk). Is this usual?

I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

I purchased a film but it won't play because iTunes says I need to authorize the computer, but when I do that it says the computer is already authorized. Huh - some system. Any ideas?

I purchased a film but it won't play because iTunes says I need to authorize the computer, but when I do that it says the computer is already authorized. Huh - some system. Any ideas?
Using Windows 7

Hey Louni,
Thanks for the question. I understand you are having issues with Authorizing your computer to play content. The following articles may help to resolve this issue:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

Purchase Order Notes not displaying in some systems

Hi All,
Purchase Order Notes are not displayed in some systems. But the same notes are viewable from a different PC.
This is the case of few of my end users.
Please help.
Thanks
Vijay

Hi All,
The issue is resolved. It was because of updating the IE version from 6 to 7.
We have degraded the IE version back to 6 and it all worked fine.
Thanks
Vijay

Some systems doesn't show up in the all systems. why?

Hi
We had a SCCM 2007 sp2 environment before. then we changed the server and installed a fresh SCCM2012.
We use active directory client deployment method. even i tried installing the client from the exe file of ccmsetup.exe
until now 120 systems client has installed successfully but we faced two issues:
1- on some systems ccmsetup process exits after 10-20 seconds!!
2- on some systems even after a successful installation, the system wont show up in the config manager console.
any advise or help?
thanks

Yes, those are client side logs. If the client cannot communicate with the server, there is no way for the server to have information about the client in its logs.
Jason | http://blog.configmgrftw.com | @jasonsandys
Thanks a lot, but I couldn't find any errors. Just in ClientStartupManager.log there is an error :
[----- STARTUP -----] ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
Machine: OA-NEW ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
OS Version: 6.1 Service Pack 1 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
SCCM Client Version: 5.00.7958.1000 ClientIDManagerStartup
12/31/2014 11:01:36 AM 3776 (0x0EC0)
'RDV' Identity store does not support backup.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
CCM Identity is in sync with Identity stores
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Unable to backup CCM Identity in any Identity stores. (0x8000ffff).
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Deleted Certificate ID from registry successfully
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
Client is set to use HTTPS when available. The current state is 224.
ClientIDManagerStartup 12/31/2014 11:01:36 AM
3776 (0x0EC0)
[RegTask] - Executing registration task synchronously.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
[RegTask] - Client is already registered. Exiting.
ClientIDManagerStartup 12/31/2014 11:01:48 AM
5420 (0x152C)
Read SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
Evaluated SMBIOS (encoded): 530079007300740065006D002000530065007200690061006C0020004E0075006D00620065007200
ClientIDManagerStartup 12/31/2014 11:01:49 AM
5420 (0x152C)
No SMBIOS Changed ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SMBIOS unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
SID unchanged ClientIDManagerStartup
12/31/2014 11:01:49 AM 5420 (0x152C)
HWID unchanged ClientIDManagerStartup
12/31/2014 11:01:50 AM 5420 (0x152C)
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=FALSE
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Windows To Go requires a minimum operating system of Windows 8
ClientIDManagerStartup 12/31/2014 11:01:50 AM
5420 (0x152C)
Computed HardwareID=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
Win32_SystemEnclosure.SerialNumber=Chassis Serial Number
Win32_SystemEnclosure.SMBIOSAssetTag=Asset-1234567890
Win32_BaseBoard.SerialNumber=131118928908938
Win32_BIOS.SerialNumber=System Serial Number
Win32_NetworkAdapterConfiguration.MACAddress=BC:EE:7B:9C:BE:8B
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
HardwareID1=2:FA22FFF79BAA23AC5E743AF0CD168E733CDAA368
HardwareID2=6DE60500010000FE
ClientIDManagerStartup 12/31/2014 11:01:51 AM
5420 (0x152C)
Mahdi. Ghorbanpour http://yektagostarhezare.ir

SCCM client not getting installed on some system (SCCM 2012 SP1)

Hi,
I am new to SCCM. I deployed sccm client via "client push deployment". Client installed on 90% system , but some system are not getting sccm client install. I restarted WMI service and file sharing on those client.
1:- I check the ccmsetup.log file on one of the system.
<![LOG[File C:\WINDOWS\ccmsetup\{1AF71F68-6089-4211-ADDC-06DF40606141}\client.msi installation succeeded.]LOG]!><time="11:31:28.071-330" date="08-19-2014" component="ccmsetup" context="" type="1"
thread="3440" file="msiutil.cpp:831">
<![LOG[No client language changes are detected per current client.msi.]LOG]!><time="11:31:28.071-330" date="08-19-2014" component="ccmsetup" context="" type="0" thread="3440" file="ccmsetup.cpp:8140">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="11:31:34.176-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="3440" file="ccmsetup.cpp:3320">
<![LOG[Sending Fallback Status Point message to 'IN-SCCM.DOMAIN.COM', STATEID='400'.]LOG]!><time="11:31:34.176-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="3440"
file="ccmsetup.cpp:9421">
<![LOG[Params to send FSP message '5.0.7804.1000 Deployment [MP] IN-SCCM.domain.com']LOG]!><time="11:31:34.176-330" date="08-19-2014" component="ccmsetup" context="" type="0" thread="3440"
file="ccmsetup.cpp:9552">
<![LOG[State message with TopicType 800 and TopicId {87645077-E6A4-4379-A76A-BE17C536F429} has been sent to the FSP]LOG]!><time="11:31:34.300-330" date="08-19-2014" component="FSPStateMessage" context="" type="1"
thread="3440" file="fsputillib.cpp:752">
<![LOG[Deleted file C:\WINDOWS\ccmsetup\ccmsetup.xml]LOG]!><time="11:31:34.300-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="1888" file="ccmsetup.cpp:9156">
<![LOG[CcmSetup is exiting with return code 0]LOG]!><time="11:31:34.316-330" date="08-19-2014" component="ccmsetup" context="" type="1" thread="1888" file="ccmsetup.cpp:10540">
2:- I checked SMSAdminUI.log ,
[53, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[36, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[56, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[61, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[64, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[49, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
[66, PID:1936][08/19/2014 12:24:50] :[IN-SCCM.domain.com] : The request failed with HTTP status 503: Server Error.
3:- CcmExec.log:-
<![LOG[*** Keep the system awake]LOG]!><time="11:38:09.505-330" date="08-19-2014" component="CcmExec" context="" type="1" thread="3232" file="powerstatemanager.cpp:1057">
<![LOG[*** System is now free to go to sleep]LOG]!><time="11:38:10.255-330" date="08-19-2014" component="CcmExec" context="" type="1" thread="3232" file="powerstatemanager.cpp:1068">
<![LOG[Could not load logging configuration for component FileSystemFile. Using default values.]LOG]!><time="11:51:53.939-330" date="08-19-2014" component="CcmExec" context="" type="2" thread="1268"
file="stdlogging.cpp:480">
Can anyone suggest , which log file i have to check more.

Hi,
I checked locationservices.log and got the result.
<![LOG[Raising event:
instance of CCM_CcmHttp_Status
   ClientID = "GUID:4B37DF71-4647-424F-8E4F-E011E38F0970";
   DateTime = "20140819060312.831000+000";
   HostName = "IN-SCCM.domain.com";
   HRESULT = "0x00000000";
   ProcessID = 3040;
   StatusCode = 0;
   ThreadID = 1784;
]LOG]!><time="11:33:12.831-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="event.cpp:706">
<![LOG[Persisting the management point authentication information in WMI]LOG]!><time="11:33:12.862-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lssecurity.cpp:921">
<![LOG[Persisted Management Point Authentication Information locally]LOG]!><time="11:33:12.878-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lssecurity.cpp:928">
<![LOG[Current AD site of machine is India]LOG]!><time="11:33:12.925-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lsad.cpp:746">
<![LOG[MPLIST requests are throttled for 00:04:38]LOG]!><time="11:33:13.034-330" date="08-19-2014" component="LocationServices" context="" type="2" thread="3240" file="lssecurity.cpp:4528">
<![LOG[Current AD site of machine is India]LOG]!><time="11:33:13.065-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lsad.cpp:746">
<![LOG[Updating portal information.]LOG]!><time="11:33:13.190-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lssecurity.cpp:4103">
<![LOG[Updated FSP 'IN-SCCM.domain.com' from AD to local.]LOG]!><time="11:33:13.424-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="1784" file="lsad.cpp:6155">
<![LOG[Received reply of type PortalCertificateReply]LOG]!><time="11:33:13.752-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="replylocationsendpoint.cpp:302">
<![LOG[The reply from location manager contains 1 certificates]LOG]!><time="11:33:13.752-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lsportalutils.cpp:93">
<![LOG[Updating portal certificates]LOG]!><time="11:33:13.752-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lssecurity.cpp:4143">
<![LOG[Successfully created context from the raw certificate.]LOG]!><time="11:33:13.783-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="3612" file="lssecurity.cpp:4247">
<![LOG[Executing Task LSRefreshLocationsTask]LOG]!><time="12:33:10.868-330" date="08-19-2014" component="LocationServices" context="" type="1" thread="428" file="scheduledcleanupendpoint.cpp:116">
and the ClientLocation.log file..
<![LOG[Domain joined client is in Intranet]LOG]!><time="11:32:50.927-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:896">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:32:51.020-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:32:51.020-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:1364">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:32:51.364-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:32:51.379-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="336" file="lsad.cpp:1364">
<![LOG[Current AD forest name is domain.com, domain name is domain.com]LOG]!><time="11:33:09.974-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:818">
<![LOG[Domain joined client is in Intranet]LOG]!><time="11:33:09.974-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:896">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:33:10.302-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:33:10.349-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:1364">
<![LOG[Rotating assigned management point, new management point [1] is: IN-SCCM.domain.com (7804) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="11:33:11.332-330"
date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:5909">
<![LOG[Assigned MP changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com>.]LOG]!><time="11:33:11.363-330" date="08-19-2014" component="ClientLocation" context="" type="1" thread="1784" file="lsad.cpp:1364">
In ClientLocation.log file.. Assigned MP is changed from <IN-SCCM.domain.com> to <IN-SCCM.domain.com> again and again..
and ClientIDManagerStartup.log contains..
<![LOG[[RegTask] - Client is already registered. Exiting.]LOG]!><time="11:32:47.351-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="regtask.cpp:793">
<![LOG[Evaluated SMBIOS (encoded): ]LOG]!><time="11:32:48.460-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="smbiosident.cpp:184">
<![LOG[SMBIOS unchanged]LOG]!><time="11:32:48.460-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:671">
<![LOG[SID unchanged]LOG]!><time="11:32:48.460-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:688">
<![LOG[HWID unchanged]LOG]!><time="11:32:49.553-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:705">
<![LOG[GetSystemEnclosureChassisInfo: IsFixed=FALSE, IsLaptop=FALSE]LOG]!><time="11:32:49.600-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:215">
<![LOG[Windows To Go requires a minimum operating system of Windows 8]LOG]!><time="11:32:49.678-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="util.cpp:2902">
<![LOG[Computed HardwareID=2:2AF3437D810085AF58274221194EE64E5365F4E2
   Win32_SystemEnclosure.SerialNumber=<empty>
   Win32_SystemEnclosure.SMBIOSAssetTag=<empty>
   Win32_BaseBoard.SerialNumber=BTCR71400LLA
   Win32_BIOS.SerialNumber=
   Win32_NetworkAdapterConfiguration.MACAddress=00:19:D1:78:8A:1D]LOG]!><time="11:32:49.678-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:476">
<![LOG[Persisted hardware IDs in CCM_ClientIdentificationInformation=@:
   HardwareID1=2:2AF3437D810085AF58274221194EE64E5365F4E2
   HardwareID2=3AD70278013A0076]LOG]!><time="11:32:49.678-330" date="08-19-2014" component="ClientIDManagerStartup" context="" type="1" thread="1504" file="ccmid.cpp:575">
Its showing client is already registered.. but its not showing in SCCM console.
Any idea

Sections of report not being displayed on some systems

Post Author: jlutz
CA Forum: General
Hello... strange issue... We have these Crystal 11 reports deployed that are being called via a VS .NET 2005 application. The reports display fine on most systems, but on some systems (Dells, a few years old, 512mb of ram), sections of the report are not being displayed. For example, on one report parts of the header are not displayed, nor is some of the subtotal sections etc.However, if they zoom to 75%, they can view the subtotal section but the header part disappears. Additionally, if they export or print the report, it comes out just fine! Any idea what could be going on here? Thanks!

Post Author: PeterLiebich
CA Forum: General
I have issues in ReportDesigner when I have my hardware acceleration set at maximum try reducing it. Goto
ControlPanel-> Display Properties (settings Tab) -> Advanced Button -> troubleShoot tab. I had to set my down by 4 notches before it worked. - Try setting it to none to see if it fixes your issue

Some system rules failed to load.

Hello Every one
i have a problem with my Monitoring ,the alert which i receive continuously in My SCOM 2012 motoring console is..
The System Center Management Health Service 123-31234 running on host xxx-xxxx.Root.net and serving management group with id {0407FB6F-896A-7389-EA01-D60C72ABBD5A} is not healthy. Some system rules failed to load.
I restarted the Service System center Management Service,also delete the folder health service State folder to clear the cache,but still the problem is there.
and i am getting this message in the Event logs of faulty system
Faulting application name: MonitoringHost.exe, version: 7.0.8560.0, time stamp: 0x4f210669
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac
Exception code: 0x40000015
Fault offset: 0x00000000000761c9
Faulting process id: 0xc2c
Faulting application start time: 0x01cfb546b794c320
Faulting application path: C:\Program Files\System Center Operations Manager\Agent\MonitoringHost.exe
Faulting module path: C:\Windows\SYSTEM32\MSVCR100.dll
Report Id: 00042e99-213a-11e4-93f9-f4ce46830654
Faulting package full name:
and the event id is 1000
Thank You!

Have you upgraded your SCOM 2012?, please note, manually installed agents will NOT be updated automatically, you need to run the agent roll-up/upgrade by manually logging onto the servers
plz run the below PS to check the updates on your agents
Import-Module operationsmanager
$agents = get-scomagent
$value = $agents[0].HostedHealthService.GetMonitoringProperties() | ? {$_.Name -eq “PatchList”}
$agents | select version, Name, PrimaryManagementServerName, ManuallyInstalled, @{Label=”PatchList”; Expression={$_.hostedhealthservice.getmonitoringpropertyvalue($value)}} | sort primarymanagementservername, manuallyinstalled, version | ft -autosize
Faizan

Get error messages for those procedures in some system tables

Hi expert,
when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
Many Thanks,

>
when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
>
No - there is no system log table.
You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
Here is an Oracle-Base article that shows how to use the pragma to perform logging.
http://www.oracle-base.com/articles/misc/autonomous-transactions.php

Some system sounds have disappeared

I just retreived my MacBook Pro from the customer services, where the Logic Board has been changed.
I noticed that some system sounds are not performed anymore.
For example, after completing a download from the Internet the "download folder" on the dock used to "pop". Now the icon jumps but no sound is played.
How can I manage sounds and assigned actions?
Thanks a lot

Welcome to Apple Discussions:
Do you have any 3rd party audio apps such as AirFoil or WireTap installed?
If you open the Audio MIDI setup and under Audio devices, Default Output, if you see some SoundFlower or other listings, that is usually the problem.
If you only have "built-in output" then the problem lies elsewhere.
FYI: There is an entire forum for coreaudio, well hidden
http://discussions.apple.com/forum.jspa?forumID=734

Wallpaper fixed for the entire domain with group policy but some systems are getting the updated wallpaper

Hi ,
I fixed the wallpaper for the entire domain and It was applied to entire domain.
After some day, I have changed the domain wallpaper. Then some systems are showing New wallpaper and some systems are showing old wallpaper.
I have applied the gpudate /force command for those system who didn't get wallpaper.
Could you please suggest.

Hi Srikanth,
First, please make sure that the GPO is applied to client properly.
To check that, please follow the steps below:
gpupdate /force
gpresult /h C:\report.html
Note: This procedure needs the privilege of the Administrator.
If the GPO is applied properly, please try to reboot the client.
If issue persists after reboot, please check if the following link is helpful:
The "Desktop Wallpaper" Group Policy setting is not applied in Windows 7 or in Windows Server 2008 R2
https://support.microsoft.com/en-us/kb/977944
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am buy a iphone4s ,i don't know for some system please call me .

i am buy a iphone4s ,i don't know for some system please call me .

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
If you are having a problem then if you post it what it is then somebody on here might be able to help - if your problem is related to the iPhone itself, then you will probably be better off posting in the Using iPhone forum, this forum is for problems related to the iTunes Store.

Some systems donu00B4t recognize master system in SDCCN administration

Similar Messages

Maybe you are looking for