Some Tables are missing in DBA_CAPTURE_PREPARED_TABLES

Hi,
Using Oracle 10.2.0.3.0 on linux 64 bit
I have setup one way Stream replication(SCHEMA REPLICATION) from production to destination server, when i am executing the query DBA_CAPTURE_PREPARED_TABLES view, it is not showing two or three tables, one of the table have same number of records as production have. Do i need to do any thing, because replication is running fine.
Do i need not to worry because i am doing schema level replication and following view is showing the name of schema
SELECT * FROM DBA_CAPTURE_PREPARED_schemas;
Regards,

It is stream specific question and it is regarding the configuration of Oracle Stream, Don't you think so (Capture is one of the key process of stream or it is something different)
Could you please help me in this regards

Similar Messages

Re: Some Tables are missing: Query Builder

Thank you!!! I had the same problem and this (table.xml) has helped, I can now see the tables in the left.
I'm also not able to see any tables in the "Query Builder". I have tried to explore to see if the fix is similar with no luck. Does the Query Builder have a simlar fix?
Thanks!!!
Max

Max,
I branched this query to start a new thread. While the thread: Some Tables are missing did help you see your tables, much of the discussion happened last year and was not about the query builder.
In the query builder for the current 1.1.2 build, you can only see tables you own. In the next update, you'll also be able to see tables you have select access to.
Regards
Sue

Some SAP R/3 Tables are Missing

Hi Friends,
I made a connection between SAP R/3 and Crystal Reports. When I am trying to see the tables of SAP R/3 I am not able to see all the tables only few tables are visible. For example in Standard table I am able to see only LIKP table, but VBAK, VBAP etc ... tables are missing in the list.
Can any one guide me to get the total list of SAP R/3 tables.
Regards
Sankar

See this posting for how to: Crystal Reports 10
You'll have to change the registry key to match your version but should work for you.
Thank you
Don

In the last 36 hours my photos have jumbled within various albums. Random photos have attached at the end of an unrelated album, old photos have appeared again on Recently Added, some photos are missing but still on "collections". No date order

Within the last 36 hours my photo albums have turned into a real jumbled mess. Random photos have appeared at the bottom of my Recently Added album. In most cases it's a copy of a photo that was taken months or years ago so now it appears twice.. 200 random photos have appeared in an unrelated album. Some photos are missing completely. The date order is correct in some places and then it goes back and forth over the months and years. The "collections" appears to be okay. This morning when I went into the photo app About 50 photos that were permanently deleted 3 months ago reappeared on the Recently Added Album which I deleted again. if I delete these irreplaceable photos from the unwanted album it will delete the photo completely. Help please - this is so annoying and frustrating. I hate to think when I turn the iPad on tmoor row what else will have changed .

Quick Update:
I usually have my Mac laptop up with Messages running on it. As you know, it will receive the same messages you send/receive on your iPhone. I thought all my old photos would be there too, but they have all disappeared as well except for the last few.
Messages is supposed to archive all old photos to a directory called ~/Library/Messages/Attachments. On my mac, this was a 0 byte file that was created back in Jan 2014. As a result, none of the old photos got saved on my Messages app either. I looked at a Time Machine Backup and it has been the case since September (no earlier backups available). So, it's unclear how long this issue has been going on for my Messages app and how related it is to my iPhone problem.
In any case, if any of you use Messages, you may be able to recover your photos in that directory provided it didn't get trashed like mine did. I moved the file and created a new Attachments directory. Upon relaunch, Messages started properly storing new photos in there again.
Either there was a really terrible bug in the Apple software or something malicious has happened.
P.S. I'm running OS 10.9.5 Mavericks. There is a thread of people with this problem on Yosemite here:
No pictures are shown in Message om Mac
This seems like a pretty seriously terrible bug. I will be talking again to AppleCare on Wednesday and I hope they can escalate this.

Crystal Report: ERROR - Some parameters are missing values

          mine report it possesses a single parameter ....
          this is the example of like tries of to change the value set up in the report...
          ERROR: Some parameters are missing values
          thanks help...
          EXAMPLE:
          <%@ page import="com.crystaldecisions.report.web.viewer.*"%>
          <%@ page import="com.crystaldecisions.report.htmlrender.*"%>
          <%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
          <%@ page import="com.crystaldecisions.common.keycode.*"%>
          <%@ page import="java.util.*"%>
          <%
          try {
          IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
          String report = "report/ReportParametro1.rpt";
          IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
          request.getLocale());
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("CICCIA");
          pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
          pfieldDV1.setDescription("Query Dinamica....");
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          CrystalReportViewer viewer = new CrystalReportViewer();
          viewer.setReportSource(reportSource);
          // layout
          viewer.setOwnPage(true);
          viewer.setBestFitPage(true);
          viewer.setHasLogo(false);
          viewer.setHasRefreshButton(true);
          // group navigation
          viewer.setHasToggleGroupTreeButton(false);
          viewer.setDisplayGroupTree(false);
          // page navigation:
          viewer.setHasGotoPageButton(false);
          // print/export
          viewer.setHasExportButton(true);
          //viewer.setPrintMode(CrPrintMode.PDF);
          viewer.setPrintMode(CrPrintMode.ACTIVEX);
          viewer.setIgnoreViewStateOnLoad(true);
          viewer.setParameterFields(fields);
          viewer.setEnableParameterPrompt(false);
          viewer.refresh();
          viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
          out);
          viewer.dispose();
          }catch(Exception e){
          out.println("Errore " + e.getMessage());
          %>


I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
          Also, what needs to be done for displaying export option of EXCEL?
          Thanks,
          Farzal

My photos are in the wrong albums and some photos are missing all together. How can I make them go back to their correct albums?

iTunes is placing my photos in the wrong albums and some photos are missing all together. How can I make them go to their correct albums?

Nevermind. I just renamed the folder on my mac and synced it again and everything is now in its proper place.

Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet thos albums appear on the nano icon on my desktop but none of the others. What's happening?

Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet ONLY those albums appear on the nano icon on my desktop after being dragged there but none of the others. What's happening?
I've read some of the post here that I thought might help but they refer to titles (Music) and triangles in the "Devices" window which are nowhere to be seen when I open the "Devices" window.
I have iTunes 11.0.3 and Mac OS 10.6.8. Does this make a difference?

I should mention that, for the first problem, I do make sure that my new tracks are stored in the folder where I told iTunes that my music is in. Also, when I say the cataloging of my library stops short of cataloging all my songs, I have tried leaving the computer unattended for days (my computer's sleep mode is disabled). It always stops before cataloging all of my music regardless of whether I am doing something else while iTunes is cataloging, or if I just let iTunes be the only program that's open during the cataloging process.

Some fields are missing in Current Task - Designer Workflow Approval Task Process

Hi All,
I am using approval task process activity in designer workflow. When i go to the single task behaviour page, some fields are missing under Current Task Source.
Some missing fields are :
1. Assigned To
2.External participants
3. Form Urn
I am trying to get the above fields but not available. What could be the issue?
Puli Bala

Hi Puli,
I think your task list is corrupted, could you please try to associate your workflow to another task list in SharePoint Designer > Click Workflows on left navigation > Click to open your workflow > Under Settings section, select another task
list and test.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes greek letters) into pdf. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially greek

hello there! i am using Adobe acrobat pro DC and using windows 8.1. Recently I was trying to convert a web page (includes Greek letters) into PDF. I noticed that the conversion is not accurate, some words are missing, some are misplaced. Especially Greek words are not accurately converted or even not converted. Please give me some suggestions to improve this issue. Regards

Hey quantum info,
Thank you for posting at Adobe forums. We would love to help you out.
Could you please let me know if you have tried converting other web pages to PDF and checked if the same issue persists.
How have you been trying to convert the web page to PDF?
Are you trying to convert to PDF directly via browsers or using "File > Create > PDF from Web Page" option in Acrobat.
Let me know more so that I can analyze where actually the issue persists.
Hope to hear from you.
Regards,
Anubha

My itunes has stoped working it says some files are missing

My Itunes has resently stopped working it says that some fiiles are missing i cannot access it and i do not know what to do

What's the precise text of the message about the files, please? (There's a few different ones I can think of that you might be getting.)

I can't install itunes 11.0.4.4 and so I can't sync with IOS7 can't uninstall old Itunes error message saying some files are missing. What to do?

I am trying to install the latest version of Itunes so I can Sync with IOS7 but I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
I tried to just un-install the old version but my computer tell me it can't because some files are missing. I don't know how to find them or how to fixx my problem. Can anyone help?
Thanks

I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

I download pro logic 9 to my second computer but some instruments are missing, can anyone advise me on this? Thank you. Gene

I download pro logic 9 to my second computer but some instruments are missing, can anyone advise me on this?
Thank you.
Gene

You're welcome!

Some segments are missing in the idocs for master data zdebmas

hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...

hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns .

Crystal Report "some parameters are missing values" while exporting/printin

I am able to pass parameters from a JSP to a crystal report through CrystalReportViewer and view the report. (I tried doing it using the code provided on this help forum. I was getting a message: "Some Parameters are missing values". I had to add 1 line: pfield1.setReportName(""); for every parameter field. And It worked..)
Now I can see the "Print" and "Export" buttons. But when I try to print or export the report, I get the same message "Some Parameters are missing values".

see posting "parameter driven export to excel" on April 26th

Some Tables are missing in DBA_CAPTURE_PREPARED_TABLES

Similar Messages

Maybe you are looking for