Some tech related questions...

Ok, I know enough about computers, but with switching to a mac, hardware issues are becoming somewhat confusing to me. I bought this http://www.newegg.com/product/product.asp?item=N82E16822136032 to use with my macbook pro over eSATA, but I wanna sell my macbook for a mac pro. Can I take that hard drive out of the external casing and install it inside the Mac Pro? Is is it compatible? I ask because someone recommended this HD to me to use in the casing, so I don't know if there's something weird about it that's only used for external casings.
Also, is there RAM outside of Apple's RAM that works? Apple's RAM is ridiculously over priced. I think they should be taken to court over it somehow. It's truly robbery. Regardless, any RAM I can buy from third parties?
Can other graphics cards be installed in the Mac? As in can I have the graphics card it comes with and install a PC one inside so, even if the OS X can't use it, when I boot up in Windows, it can use it for gaming?
I think that's all! Thanks for any help!

As long as the drive is SATA it can be reformatted for the Mac Pro.
If you can find a third party company with exactly the same RAM specs then go ahead and install it yourself, that's what a lot of Mac users do.
Just be warned that second tier RAM isn't worth the trouble of getting it, installing it, troubleshooting it and returning it just to repeat the cycle again.
Buy top tier tested RAM and it should work the first time.
As of this time there is no third party PCI express third party video card options (or much of anything else really) for Mac's. That will change over time of course, but for now it's best to buy the next level up video card.
No you can't place a PC video card in a Mac unless your able to flash it for a Mac. You could lose the whole card in the process.
You see even though Windows can run on a Mac, there are drivers that have to be installed for the hardware.

Similar Messages

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

Some bios related questions

ill make this as short as possible..im new to the 939 socket..and this k8n neo2 F...theres a few thing in bios i dont understand..and the manuall only tells you how to change them...not what the actually do
1st:spectrum spread...atm its disabled..i cannot enable it( i dont know y)whats this feature do?
2nd:HT frequency...atm its at 5x..what does this do..and what do the values mean(what is best to have set)
and 3rd:Adjust CPU ratio...its set to "Startup" but i have x4 and x20 as options..what does this function do for me..and whats best to have?
sorry if this n noob questions..but i wont go messing with things there i dont understand

Simple questions require a simple answer.
However,simple questions are more often cause for confusion also.
1: the spectrum checks for interferences made to your harddrive that can cause damaged data.Think of it like holding a magnetic source in front of your monitor,the screen will warp.
When overclocking it's disabled by default and greyed out.
Most users have this disabled (I have from the first pc that used this feature)
2:HT frequency=hyper transport bus.You got a 200mhz system and this bus can run at 1000.
Hence,5x200=1000 I have read that anything above 800 will show little to zero performance decrease.
So 4x200=800 and still fine,but if you plan to set a higher frequency for the cpu (starts at 200mhz) this sum is not x200 anymore but what you set.So setting the cpu at 250 means your multiplier (cpu ratio) multiplies with this.
So if your multiplier is 10 you get 10x250mhz=2500mhz.
But now the HT bus also kicks in,so you get 5x250 (instead of 5x200 which was default) =1250 <> no boot or bsod (blue screen of death)
Set it at 4x and you get 4x250= a perfect 1000 again.
3: cpu ratio is the multiplier build in the cpu.You can lower it on most modern cpu's.But the higher ones are usually locked.
To make things simple (a rather comprehensive answer opposed to my first line) everything travels over the all important cpu bus,and that's 200mhz by default(msi gives 201 after boot) so anything else multiplies with that.That's why the HT is at 5x and the cpu at 10x if you got for example a 2Ghz cpu.
You have multiplier 12x200mhz=2.4Ghz
Your multipliers are unlocked so you can set manually lower and higher values.But this cpu is supposed to run at 2.4 so setting this higher gives you more mhz. but most likely you also need more vcore to make it work.
Keep it at auto and if you plan on overclocking it's best to read some threads about that first.
Goodluck.

I have some database related questions

hey all
i am currently designing a java GUI program for a dvd renting shop.
this program obviously needs a databse, i was just wondering how much possibly a database on a home pc could hold data because this shop have about 15000 DVD title and about 1500 client so i was wondering how much a mySQL databse table could hold....
i also have another question...this shop have an access database...my question is can i use the existing database and querie it from my java program??? do i need a driver ??? can i querie an acces databse just like a regular SQL databse(e.g. SELECT * FROM TABLENAME) ????

hey all
i am currently designing a java GUI program for a dvd
renting shop.Why not simply download JBoss Seam's DVD store example. It's fully coded for you already!
this program obviously needs a databse, i was just
wondering how much possibly a database on a home pc
could hold data because this shop have about 15000
DVD title and about 1500 client so i was wondering
how much a mySQL databse table could hold....
You will not have issues even with Access with that few a number of rows. Disk is really the only limitation on the size of the database. (There can be O/S or database specific limitations, such as 2GB of total size). So, do not worry about how many records.
When you truly get a large number of records (tens of millions plus) or you are joining two large tables, then you can have performance issues. Good use of primary keys, indexes and database design can limit this issue.
i also have another question...this shop have an
access database...my question is can i use the
existing database and querie it from my java
program??? do i need a driver ??? can i querie an
acces databse just like a regular SQL databse(e.g.
SELECT * FROM TABLENAME) ????You can use Access, mySQL, Postgres or any number of other databases. Each will require (and will have on their site) a JDBC driver that you need to have on your application's CLASSPATH. My recommendation would be mySQL or Postgres. Both are free and excellent quality.
As an aside, you should rarely SELECT * from any table (other than a code or lookup table). Use a WHERE clause to limit results. What user would possibly want to scroll through ALL 15,000 records? :^)
- Saish

[SOLVED] Some UEFI related questions.

To the better understanding of this topic, I would first describe my (related) hardware setup:
Gigabyte GA-H77-DS3H motherboard,
one Kingston 16Gb SSD Drive
one Western Digital Sata2 HDD (320 Gb)
First thing is, that I wanted to install Windows 7 (64bits) in UEFI-GPT mode on the Western Digital drive, but simply no UEFI boot option was presented to me when I booted the installation medium. So I left it alone and installed W7 in BIOS-MBR mode.
Then, as the motherboard's BIOS supports UEFI and Legacy Bios booting too, I installed Arch in about ten minutes in UEFI mode on my SSD, with GRUB in UEFI mode. It works.
Now the problem is, that I cannot configure GRUB that it loads Windows from the WD drive.
I've tried several things.
First, I've tried os-prober. It finds absolutely nothing, not even memtest. The windows 7 loader is invisible to this one.
Then I've found this one: https://wiki.archlinux.org/index.php/GR … S-MBR_mode
So I've tried it, made the /etc/grub.d/40_custom with the related data (i.e. partition UUID, hints...), it could not boot.
The problem is, that the ntldr module does not exist (I've checked and double checked /usr/lib/grub/x86_64-efi/ , there is no such module.)
So:
If I want to dualboot in UEFI mode, do I have to install Arch AND Windows in UEFI mode too?
Why does os-prober not find my BIOS-MBR installed Win7?
Why does os-prober not find my Memtest?
(For the moment, I re verted my arch install to boot from a GPT-BIOS partition, and found all my other stuff with os-prober...)
Last edited by scar (2013-10-02 14:03:52)

You cannot chainload Windows BIOS from UEFI GRUB. Same goes for Windows UEFI from BIOS GRUB. You might have better luck with rEFInd tough. See "Booting Legacy OSes" section in http://www.rodsbooks.com/refind/using.html . Slightly similar issue - https://bbs.archlinux.org/viewtopic.php … 3#p1331373 .
EDIT 1: Since you mention that you have switched the Arch install in your SSD to BIOS-GPT, you can try https://wiki.archlinux.org/index.php/GR … S-MBR_mode to chainload Windows installed in BIOS-MBR mode in HDD. It should work as long as GRUB is installed in BIOS mode (either in the GPT SSD or in the MBR HDD) and the HDD (in which Windows BIOS is installed) stays as MBR. os-prober does not always work properly (more so in case of UEFI) and it is not maintained by GRUB upstream.
EDIT 2: Most likely there should be an option in the BIOS/Firmware setup that disables "Legacy BIOS" (or CSM) support, making sure only UEFI boot mode is enabled. If that exists, you can try enabling "UEFI only" mode, and then try to UEFI boot Windows setup from a FAT32 USB, similar to the way you booted Arch Install ISO in UEFI mode (simply extract the Windows ISO files to the USB and then launch it from the firmware). For more info see https://gitorious.org/tianocore_uefi_du … I_boot_USB and https://gitorious.org/tianocore_uefi_du … I_only_ISO (not related to Linux, but useful for UEFI dual-booters).
EDIT 3: I suggest moving Arch back to UEFI-GPT and re-installing Windows in UEFI-GPT now rather than having to change later in the future when the need arises. If you are adventurous, and want to convert existing Windows BIOS-MBR install to UEFI-GPT, you can try https://gitorious.org/tianocore_uefi_du … OS_to_UEFI .
EDIT 4: Memtest, the one packaged by Arch - https://www.archlinux.org/packages/extr … emtest86+/ , is a BIOS based utility, so it will not work with UEFI GRUB.
Last edited by the.ridikulus.rat (2013-09-30 17:11:26)

Sdl-pulse (AUR) vs pulse + some pulse related questions

Hello everyone. I've been using Arch for over a month now, and I'm very very satisfied No more distro hopping, everything works as expected, except sdl from extra. I still have issues with sound in wesnoth with sdl 1.2.14-1. Sometimes (well, actually quite often) sound begins to stutter while playing, then it dies. In these instances I'm unable to quit the game, have to kill it (with -9) from a console.
Decided to try out sdl-pulse from AUR. Was hesitant at first because I read that in the latest version issues with pulse were solved, patches merged, etc... This doesn't seem to be the case. Sdl-pulse from AUR works without any problems, while pulse from extra most definitely does not, on my system at least. So my question is this: will sdl-pulse be removed from AUR now that it's flagged out of date? I hope not (I know I can still use it) because apparently fedora's patches seem to be better than the official release.
On a side note, what's your experience with pulse? I had to install a couple of packages from AUR to get everything working. Notably xine-lib-pulse (for KDE recognized pulse only after installing this), mplayer-pulse, bin32-skype-pulse and libflashsupport-pulse. Now everything works perfectly, can play flash in a browser while listening to music and watching video with sound in mplayer, skype works too (this was basically my goal). Now that every distro seems to be moving towards pulse, will pulse be better supported (from official repos) in the near future? I mean, is there any drawback to shipping mplayer with pulse support by default? If I understand it correctly, mplayer compiled with pulse support will work fine on pulse-less systems... No difference, right? What about the other packages (xine, flash, etc.)?

I gave pulse a shot recently. It works remarkably well _if_ you have everything setup right.
But so does alsa.

Some IPCC related questions

Hi..
I have a customer , who is experiencing an issue like, all of their agents state changes to not ready simultaneously. sometimes all the agents goes to logout state. I have check the logs, where i couldnt find major erros. IPCC server restart solves the issue for few days and again same problem arraises.
"Application manager is showing PARTIAL_SERVICE", is this anything to do with this major issue??
second issue with another client, Agent dissappears and then appears to supervisor window. And Call groups are not identified properly. E.g. under B group, some A agents appear.reason why this happens?
Your help would be highly appreciated.
Thank you.

Hi Walter,
Thank you for your helpful responce.
Regarding the agents disappearing of the CSD,
I checked the port communication between IPCC server, CSD and CAD, and found CAD side firewall is blocking the server port (59000) and CSD port (59021). I think this might be the cause of the problem.
For the agents not appering under the proper teams
Since customer is using UCCX version 6.0(1), i couldnt find manual synchronization option under Team Admin (Workflow admin). I'll go through it again and have a check.
"Application Manager" service is showing like PARTIAL service
There was some script name mismatch, i was able to sort this PARTIAL service issue.
I really appreciate your support.
Have a nice day
Kajen

Some database related Questions

1.Why using Index improve the performance , how will the data from the database is placed in the buffer ( as we see in the table or linear as per the buffer size)??
2. What happens when we create index for all the field, even it becomes like sequential read the performance will be improved right?
3. When a select statement is triggered, the corresponding table will come to buffer (if it is fully buffered) and the few records as per the given where condition is extracted adn placed Where?
4. I created a Ztable with three field numeric A , B and TOTAL and I am maintaining table maintence, so when ever i enter in SM30 field A and B, TOTAL should be the appended automatically as the sum of a and b.whether is is possible how?
5.What is Composite Key? with a real time example?
regards,
Prabhu
POINTS ASSURED.

hi
when creating table primary key creates automatically
secondary index to be create according to user requirement
to resolve u r doubt simply create a select statement with where condition with non primary key field it wont fetch data if u create secondary index it will fetch data
buffered tables will be placed in apllication server ram
compositekey means combination of two primary keys
reward if u fin useful
regards
Nagesh .Paruchuri

Some Kernel and optimization related questions

Last monday I asked about what was the best way to compile a kernel to apply a patch ( solving an hibernation resuming problem). Using the ABS turned to be an easy solution with a shiny patched kernel that works GREAT. Yestertay, I tried e4rat in order to speed up my boot process, wich now takes 1 min or so from burg to kde4 with Chrome, Eclipse, Spideroak and Dropbox all full loaded and functional on my laptop when before using E4rat that took nearly 3-4 minutes.
Laptop specs: Fujitsu Esprimo Mobile V6535 --> Intel T4300, 4 GB 800MHz DDR2 RAM, Intel GMA 4500M, atheros wifi chipset. Non-laptop related hardware (if needed to have in mind) Microsoft Natural Ergonomic Keyboard 4000 and Lifechat LX3000 headset, Logitech G5 mouse.
Currently the laptop is my main computer and used to internet-browsing, programming and sometimes to watch movies. No games.
I really enjoyed all the tweaking involved on the last week with the kernel patching and e4rat, so I want more.
Ok then, I was going to try readahead ( https://wiki.archlinux.org/index.php/Readahead ) and then I see that on the AUR there are some packages related to it, and this is the point when the questions come:
1) The article on the wiki points out to readahead-list, but there what seems to me another implementation, readahead-fedora. To me it seems obvious that the implementation may be different, but, what are the differences betweent the two?
2) what has to do ureadahead with the two said before? Plus, what is the point with the package description? "ureadahead is used during boot to read files in advance. readahead-list and sreadahead are out-of-date. Needs patched kernel!" The last part has not problem to me as kernel26-yi 2.6.38.2-2 seems to patch the kernel to support ureadahead, but is the first sentence, the one that talks about readahead-{list,fedora} being outdated. Could someone clarify this?
3) About kernel26-yi 2.6.38.2-2. ¿Does only a kernel install or a full compilation? ¿What kind of patches does it ship with? (Aside from ureadahead support)
4) https://wiki.archlinux.org/index.php/Im … tom_Kernel . Aside from the warning about the possible trouble with modules, is there any kind of common incidence with that options? Any kind of suggestion about more config options related to performance or to have in mind?
5) Any other kind of suggestion?
Feel free to suggest any option that trades RAM for performance, currently only a third of my RAM is used (or said in other words, more than half of my RAM is being unused (therefore useless)) and only gets to half or 2/3 when virtualbox is launched (twice everyday, during 5 mins or so)
Thank you all in advance for your help.
EDIT: I forgot to say, I like KDE and changing it is not an option, but feel fre to comment options on that way if you consider it would be a big deal.
Last edited by ethail (2011-04-16 18:55:26)

Yes, I forgot to mention that, but already using fastboot parameter (if that is the fastboot on my burg linux line, then i'm using it). As said, I'm very happy with my current status about booting and performance, no complains, only that something inside me wants to keep pushing on this.
I read a bit about BFS and the CK patches today, maybe I'll give it a try, maybe not now, but someday sure.
demian wrote: I tried it once and for some activities it improved performance quite noticably.
Did you notice some kind of performance decrease on other activities?

Online Help Related Questions

Hi
FYI there is no longer a dedicated place on Microsoft.com for online help related questions.
We are told that VS General (here) is the best place for help questions.
Note that these sites are a good place to get help on help (Microsoft and MVP presence):
http://groups.yahoo.com/group/hatt/ -- for WinHelp & HTML Help & general help discussion
http://tech.groups.yahoo.com/group/MSHelpViewer/ -- For HelpViewer help (VS 2010/2012 help; Windows 8 help)
http://tech.groups.yahoo.com/group/MSHelp2/ -- For MS Help 2.x help (VS 2002/2003/2005/2008 help)
Feel free to ask questions on this thread if you need to. At least then we can find your post.
You can also email the VS/MSDN help team directly -- [email protected]
Please let them know how you feel about the lack of support for Online Help in the forums.
Rob
www.helpmvp.com -- Various Help resources
Rob Chandler Help MVP www.helpwareGroup.com | mshcmigrate.helpmvp.com | hv2.helpmvp.com

Actually, we cannot (at least anymore) directly email the team. I tried and got a reject from the mail server. So, I'm going to post here so I can feel better knowing I said something and then I can get back to programming :-)
Ok, I’ve been developing Windows apps since Win 3.1 (yeah, a long time) and have always admired the Microsoft attitude towards Developers and it’s desire to educate and empower R&D.
So, I’m wondering what’s going on? Why am I being asked to have an account to develop anything for MY own PC? Why am I being asked for my Microsoft account password, repeatedly, when I’m just looking up documentation on UserControl or C3 keywords…
repeatedly? This is nothing short of annoying and it gives me pause and concern about the ecosystem. Is the plan to lock down programmer’s capabilities, knowledge and tools?
I’m involved in the TAP program for Windows 10 and have voiced concerns in the same category with regard to installation and deployment of Universal Apps. Security is not a reasonable excuse. Some of us love to program and actually
control their PCs. We are not planning to sell everything we write on the Windows Store. What happened to programming something cool for your home network or just for friends? We need, and used to have, Microsoft’s support in doing
this sort of thing. Documentation and tools are more important now than ever. I’m saddened to see the direction things are heading…
If there is a sane reason I’m being badgered to ‘log in’ to read .NET documentation every hour, please share. If not, please consider lobbying to get things back on track.
Thanks

10.3.5 sluggish on my iMac (and some other newbie questions)...

I just purchased an iMac, and am brand-new to Macs. I can do anything on a PC, and actually do PC tech support for a living, so you can imagine that I feel completely ridiculous asking some of these questions, but here goes:
1. How do I copy and paste? Ctrl+C does not work.... surely there is another alternative?
2. Is there a way I can download OE for Mac? I know Microsoft no longer offers downloads or support, but if there is another place I could find ol'familiar Outlook Express, that would be fantastic.
3. My browser (either IE or Safari) is not completely maximized. There's the area below, and an area to the side with some icons as well... is this the maximum size of the browser, or...?
4. Right now I'm running OS 10.3.5, which seems a bit sluggish. It came installed. I also have the discs for 8.6, and if it will make the system run better, I'll definitely ''downgrade.'' How would I do this? Do I have to ''reformat'' or anything like that?
5. Are there other tweaks, sort of like MSCONFIG, that will help speed up my system in general?
Here are my system stats:
iMac (Grape!), 333MHz, 6GB Harddrive, 196 MB RAM...
It's a G3 CRT, I think (if that matters).
Any help would be so much appreciated!
Tiffany
([email protected])

Hello Tiffany,
First of all, Welcome to the Apple Discussions!
In regards to your #4, I would just suggest running Software Update (after upgrading the RAM memory if possible) and upgrading to the latest version of 10.3 that should be offered to you, ie. 10.3.9). As the other posters have suggested above you should upgrade your RAM to at least 256 MB. With any updates to system software, remember to Repair Permissions from Disk Utility found at HD/Applications/Utilities/Disk Utility before and after the update.
There are many "tweaks" and troubleshooting information for OS X that you can perform to get the best from your OS and machine.
Some great information can be found @:
http://www.thexlab.com/faqs/faqs.html
A great tip, as your machine has a very small amount of Disk space is to run a little app called Delocalizer that will free up alot of space taken from Foriegn language files. The link to it can be found in Dr. Smoke's FAQ for "Freeing space on your Mac OS X startup disk".
hope that helps some,
littleshoulders [:-)

Deafult search engine on a new tab-this thread was closed but I have a related question. Once you put the new url in, what then? Close? When tried, did not work

"deafult search engine on a new tab" - this thread was closed but I have a related question. [the word “default” is spelled as it on the thread] Once you put the new url in, what then? Close it? When tried, it did not work. The closest answer is noted here. Instructing to go to about:fig. Specifically, I installed the accuweather add=on and it took over my tab home page - the one that comes up when you click for a new tab. I didn't like it so I clicked the button to remove it and the page went blank. I searched to see out to restore the tab page, tired the reply at this page :
http://support.mozilla.org/en-US/questions/753256?s=install+search+box+on+new+tabs&r=3&as=s
But it did not work. Can some on help me? Just want to know how to make google or some page open on a new tab.
Many thanks

Thanks so much for your support. As I said I am not a professional, so I by chance saw a friend who is and this is what he suggested and it worked.
We googled for an answer and found this site: http://www.guidingtech.com/8004/have-new-tab-page-open-specific-website-firefox-chrome/
It says to Download and install Download and install''' NewTabURL''' and gives instructions on how to. Now when I open the tab it goes to my preferred search page!

PM/EAM related questions posted in PLM forum

Hi,
I was going through some of the threads available in PLM forum, but to my surprise, most of the threads posted are related to PM, which should have been posted in EAM forum. It was clearly mentioned by the moderator in one of the sticky thread [PLM-Forumsplit - Please ensure you are using the right forum|PLM-Forumsplit - Please ensure you are using the right forum;
Questions regarding Plant Maintenance (PM) or Customer Service (CS) are discussed in the Enterprise Asset Management (EAM) forum
forums - posts will be moved to the right forum.
Please ensure your are opening a new thread in the right forum
Despite the clear instructions given my the moderator, PM related questions are still posted to PLM forum and some of the active participant of EAM forum answers these questions in PLM forum. It would be nice if those threads are moved to appropriate forum, so that the relevant informations are available under one forum, also, PLM forum should be monitored regularly and inappropriate threads are to be moved to their respective forum.
Few PM related threads posted recently in PLM forum:
[Change PR for External order|Change PR for External order;
[BAPI or Function Module to Complete Maintenance calls in IP10|BAPI or Function Module to Complete Maintenance calls in IP10;
[delete material from PM order|delete material from PM order;
[Message no. IW056 Work center change --> default data redefined|Message no. IW056 Work center change --> default data redefined;
[Component in Task list not reflecting in maintenance order|Component in Task list not reflecting in maintenance order;
[Deleted functional location/equipments|Deleted functional location/equipments;
[PM orders not listing components from material BOM|PM orders not listing components from material BOM;
[Completion date in Maintenance Plans in IP10|Completion date in Maintenance Plans in IP10;
I had used abuse reports for some, but numbers of such posts are many.

I hate to say this, but I often see the same thing, and I've never been able to figure out exactly what triggers selectability vs. non-selectability, but I suspect some of it has to do with tranparency flattening in particular, and possibly text wrap in cases where that comes into play. ID optimizes the PDF it creates, I think, and that might cause text, or even images, to be broken into chunks in funny ways. It occurs to me that turning off optimzing for fast web view might help in this regard.

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

Some tech related questions...

Similar Messages

Maybe you are looking for