Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

Similar Messages

Module borders not displaying when using Aggregator

I am using Captivate 4. I created a TOC for both modules in a project. Then I created an Aggregator to connect them and display both TOCs.
The issue I am havving is that the individual modules have borders on all 4 sides, yet they do not display when using the aggregator. How do I correct this?
Thank you.

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

Help topics are not displaying when using Windows 7 / IE 9 / RH10

We recently upgraded our library from RH8 to RH10. Also used a trial version of RH9 in this process. Now when we compile several of the projects have issues where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around). Anyone else having this problem?? I saw something similiar for Windows8/IE10, but the fix does not apply here (http://forums.adobe.com/message/5138909#5138909#5138909).

Hi,
I (April) apologize I have been OOO and have not been able to respond to your replies.
Let’s start over.
We have an issue where help topics do not display when selected in the TOC or when a link to the topic is clicked within another internal topic. It is in a continous loop in the browser (flickering like it is trying to load). If you right-click on the topic it displays (we are currently using this as the work-around).
We use Windows 7, IE9 and RH10 for all our projects. (Recently upgraded from RH8 to RH10)
Turns out the problem is not isolated. I have run across it in at least one other project, which leads me to think it also occurs in others.
"Does this only occur when the help is called from your software? Is it OK if you double click the start page?"
          No. I it ALSO occurs when launched from the start page.
Have you tried deleting the CPD file and reopening Rh and the project?
          Yes, without success.
Are you using any redirects?
          Per (Adrienne), “I am not using any redirects. I encounter this issue only in IE. If I paste the .htm into a Firefox browser, the help displays as it should.”
          I will add that the project also displays incorrectly in Google Chrome.
Thanks April

Will using larger font on iPhone effect email syncing with computer

Will using larger font on I phone effect email syncing with computer? ie: email to lage for page?

Thanks, I saved an email and for an unknown reason it appeared to large on the computer. Will see how it goes in the future. Cheers

HTML tags not displayed when using Data Template

Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PM

Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

Text Message Forwarding Not Displaying MacBook Pro

I am having an issue in which one of my MacBook Pros no longer appears in the menu for "Text Message Forwarding" on my iPhone 6.
I have two MacBook Pros (named MBP Old and MBP New), I only see MBP Old in the "Text Message Forwarding" menu.
Yesterday, this was all working correctly, and MBP New was appearing and active in the "Text Message Forwarding" menu on my iPhone.
Devices Used:
Mid 2013 Retina MBP 15" on Yosemite 10.10.2
iPhone 6 on iOS 8.1.3
I have performed the following in different combinations/orders in my attempt to resolve the issue (with no fix so far):
Logged out of iMessage/iCloud accounts on MBP
Rebooted MBP
Re-Enabled iMessage / iCloud accounts on MBP
Disabled iMessage/FaceTime on my iPhone
Rebooted iPhone 6
Re-Enabled iMessage/FaceTime on my iPhone
Reset network settings on my iPhone
Rebooted iPhone 6
Ensured all devices were on the same Wi-Fi network and connection was working
This was all working last night and I made no changes this then, so I am quite confused.

I'm having a similar issue as Yashar_S. I have an iPhone 5, a 3rd-gen iPad, a mid-2009 MacBook Pro, and an iMac 5K. All are running the latest os, as appropriate (iOS 8.2. OS 10.10.2). All are logged into the same Apple ID, have the same listing of phone number and email addresses for iMessage, etc. On my iPhone, under Text Message Forwarding, I see my iPad, but only *one* of my computers -- whichever one was the last that I logged out-then-back-in to iMessage.
Before this latest Yosemite update, my iPhone would list two computers, but they would be duplicate listings, though only one of the listings would work. In order to have the iPhone recognize the new iMac, I had to put my MBP to sleep (or shutdown) -- it wasn't enough to log it out of iMessage.
So I'm wondering if the "fix" to the duplicate listings issue was only a partial (i.e., cosmetic) fix and not the true, complete fix at all?
Sigh!

Images not displaying when using Mod_JK

Has anyone had this problem with any success?
platform:
Windows 2000 Professional
Jakarta Tomcat 4.1.3
Apache 2.0.039
Mod_jk connector
My_Sql 4.0.1
I have a successful connection between Tomcat and Apache via the mod_jk module.
All JSP's are displaying with the appropriate data from MySql.
My problem is that no images will display when I connect through Apache, via port 80.
When I connect to Tomcat direct through port 8080, everything displays properly including images.
Currently, I am running my application under Tomcat's webapp subdirectory.
Is there something that I perhaps not did properly configure with Apache's http.conf file or with
server.xml?
Any suggestions or answers would certainly be appreciated.
Thanks,
Lenny Sorey

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Timecode not displaying when using QTSS

Hi, I have timecode selected on some of my QT's but when I play them via the QTSS it does not get displayed. If I play them locally i can see the timecode.
Have I missed something silly?

Lenny,
I apologize for not having an answer to your question, but I'm envious that you've successfully configured mod_jk. I've read several different versions of how to configure this, but nothing has worked so far. I wonder if you could either point me to some correct instructions on how to integrate Apache and Tomcat so I might try to duplicate your success.
Thanks in advance,
Vince

Help topics are not displaying when using Windows 8/IE 10

I have a WebHelp system created in RoboHelp 7. When opening that Help from our application using Windows 8 with Internet Explorer 10 and allowing blocked content, the Help topics do not display in the right pane when clicking a topic from the Contents in the left pane. Below are the steps:
1. Open the Help system from the Help menu within the application.
2. The Allow Blocked Content displays and I allow it.
3. The Help opens and if I click a topic from the TOC in the left pane, the topic doesn't display in the right pane.
A workaround we found was to widen the left pane and the topic then displays. Also, if you don't allow blocked content, this issue doesn't happen. However, I need to allow blocked content in order for PDFs within the Help to open properly and also because the Search doesn't display without allowing blocked content.
We also tested this with a Help system that was created using Robohelp 9 and have the same issue. I'm wondering if RoboHelp 10 would solve this problem.
Does anyone know if IE 10 requires Help systems to be created in RoboHelp 10 to work properly, at least when allowing blocked content?

It seems to be time for the old divide and conquer approach.
Zip up the project so you have a copy that cannot accidentally be opened and worked on. That gives you a copy that you can safely revert to later if needed. Save the zip file somewhere safe.
Then create another copy of the project so that you have two copies that can be worked on.
Open Copy 1 and delete half the topics. Ignore any broken links reported. Generate the help from that copy.
Open Copy 2 and delete the other half of the topics. Generate the help from that copy.
It should be the case that one copy is now OK and one still has the problem.
Trash the good copy and then create a second copy of the copy with the problem.
Repeat the process until you have located whatever is causing the problem.
The process takes less time than you might think.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Legend color not displayed when using custom theme

Hi all,
We are facing a strange issue in the MSS team calender chart's legend colors. The first legend item's color appear blank/white in a custom portal theme while the color appear properly on the standard theme. Inside the chart, the color is appearing properly.
What could be the issue? which property in the theme is connected to the legend?
Thanks and Regards,
Syam.

Hi Sidharth,
We have not done any modifications to the standard service. Also, If this is the reason, why should it appear for some users and why not for others? For those users using the standard theme, the legend colors are appearing properly.
Thanks and Regards,
Shyam.

Cc text not displaying when using full motion recording

Hello everyone,
I wanted to find out if anyone has experienced a problem with
cc text not being displayed on slides with full motion recording.
I have added and sync'd the cc text on a slide that has full
motion recording. When publishing the file, no cc text appears in
the the published file.
Is there a workaround or a setting that I need to check to
ensure that the cctext shows up?
Any information which anyone can provide would be greatly
appreciated.
Sherry

Hi Sherry,
I'm having the same problem you were last year! Just wondered if you were able to find a workaround.
I have a full motion page with audio embedded in it (meaning that the audio does not show up as its own item in the timeline view). When I open the Advanced Audio Management dialog box, I'm not able to add a caption because CP4 doesn't think there's sound on this slide. (see attached screen grab -- the slide in question is slide 9. You see that the caption button is greyed out).
I've really hit a wall on this one today. I tried deleting the audio and re-adding it from the library, but it doesn't get added as an independent object in the timeline box; it just gloms onto the "captured animation" object.
Maybe it's simply not possible to have a closed caption on a FMR page? That doesn't seem right though.
Thanks, all.
Janet

Text Click box not working when using back button on playbar

I have an interstesting situation.
I have a slide that has 2 text clickboxes (Slide B)
Each text click box has an advanced action associated that controls what is displayed on the next slide (Slide C) . The click boxes and the advanced actions work just fine except for the following situation:
The learner is on Slide C and uses the 'back button' on the playbar to return to the slide where the two text click boxes are (Slide B), then the click boxes don't seem to work.
However if the learner goes back one additional slide, the slide before slide B (let's call that one slide A) and the continues from Slide A to Slide B, then the click boxes on Slide B work again.
Can't figure out why that is?
has anyone come across this issue before?

Not for native Captivate interactive objects that suffer with this limitation. There are interactive widgets such as the Infosemantics Event Handler that have preference options to Reset Success/Fail Criteria After Action.
You could download a trial version and give that a go:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
You can attach this widget to any kind of screen object to make that object interactive.

Respond with text message does not appear when phone locked.

Hi,
I have an iPhone 5S and have a very strange glitch that I am unable to overcome. Basically, when my phone is locked, I do not get the option to respond with text, I only get the "remind me later" option. When my phone is unlocked, however, the option is there. It is very strange and I cannot figure out why.
For the record, I also had the exact same probelm on the iPhone 5, in both IOS6 and when I upgraded to IOS7.
Would appreciate any help with this. Thanks.

The lack of a "reply with message" at the lock screen in ios7 has been frustrating; I appreciate finally getting pointed in the right direction.
A minor update for ios7.1.1 with iPhone 5s (perhaps specific to devices with Touch ID): for me setting what shows up in the Lock Screen is in Settings App > Touch ID and Passcode.

WAD Variable screen not displaying when using a customer exit variable

Hello,
I have a query which has 3 variables, one of which is of type customer exit and gets populated with a default value.
When I run this query on the web from within BEX it works fine, however when I run it within any BI7 web template the variable screen does not pop up. Of course if I remove or change the offending customer exit variable the variable screen pops up.
I have switched the display variable check-box to on, and it still doesn't work.
Is this a 'feature' of BI7?
Many thanks
Sarah

Fixed it myself by tweaking the URL....
Added &VARIABLE_SCREEN=X to the end of the url and the variable screen now pops up. Its not an ideal solution but it works.
Anyone have any better ideas?

Some Text Messages do not display when using large font on iphone

Similar Messages

Maybe you are looking for