Some text on my screen appears a little bit "higher"
Hello everyone
Today i noticed that the date-time and the browser type line appears a little bit "higher". This happened after a restart i think, but i'm not sure.
Here is what i mean:
Links to screenshots:
http://imageshack.us/photo/my-images/825/screenshot20110708at119j.png/
http://imageshack.us/photo/my-images/59/screenshot20110708at129.png/
Thank you for your time,
Bill
Oh and also "confirmation" buttons ("Done", "Force Quit", "Apply", "Relaunch") and any selections i make appear such as the above, some pixels up.
Here is another two screenshots:
http://imageshack.us/photo/my-images/26/screenshot20110708at201.png/
http://imageshack.us/photo/my-images/155/screenshot20110708at216.jpg/
Was it something i did??
I have no idea what i could be!
Similar Messages
-
My iPad overheated and it was so hot that i loosen it out of my hand and dropped to the floor, causes few scratches n a minor crack
will I get a replacement for that?Without AppleCare+, no, not even a free repair. You dropped it, so it's on your dime now. You wouldn't expect free repairs to your car after crashing it into a pole, would you?
Also, note that Apple may not be enthusiastic about repairing it, because a dropped iPad may have other issues beyond a broken screen. Other internal components may have been damaged. Buying a replacement may be the best way of getting back a reliably-functioning iPad. But you could also go with a cheaper repair from a third-party company that will just replace the screen and let you worry about whether or not that repair is sufficient. That kind of repair voids the warranty, but it's already void thanks to the damage anyway. -
"White Screen" appears when I play a movie
Hello,
I am trying to play a movie in Apple QuickTime 7 Pro and for some reason a white screen appears with no volume when the movie is played. Also, I get a window popping up saying "Some necessary QuickTime software is missing. It may be available on the QuickTime Web Site." I clicked on the link and tried downloading all the codecs that were available from the Apple QuickTime website. Unfortunately, none of the codecs seem to work. I am just wondering if there is a specific codec I need to download to slove this problem.
Thank you,
JustineSince your profile says you are using a Mac you would be more likely to get an answer to this question by posting in the QT for MacOS group.
http://discussions.info.apple.com/webx?[email protected]^[email protected]
But the short answer is that you do not have the video decompressor for that particular movie. Open the movie again and then open the MovieInfo window (Command-I). You should then see the compressors listed that were used in making the movie. Post the names in the Mac group and someone will possibly be able to point you to a web site that has the decompressor. It would also help if you list the movie format (avi, mov, etc) of the file. -
Turn off this nag screen?? "Some text layers contain fonts that are missing"
Hi all, I have recently been handed a web project from a mac user and everytime I open one of the pages I get the following message. "Some text layers contain fonts that are missing...etc" I have the same exact fonts but in the new open type format. Anyways apparently photoshop can't tell that. I would like to TURN OFF this nag screen. I am not even editing the text layer with the font.
Is there anyway to turn off this nag screen? I turned off glyph protection in the prefrences and restarted photoshop to no avail.The missing fonts will be listed in grayed out color in the separate last section at the bottom of the font menu accessible from the text tool's property or the character panel
The layers with missing fonts will have the warning sign on the layer's icon in the layer's panel however the missing font/s will be displayed with the correct font. When you try to edit the text on such layer, Photoshop will show a message with the missing font/s and will say that it will be converted if you edit it. If you choose OK, and you have different fonts on the same layer, watch which fonts will change appearance. -
I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
Screen hangs when user types in some text in file upload component
Dear All
I am using file upload component in webdynpro java in a custom application and added some validation logic on the file
selected. This is being used to upload jpeg files to KM repository. Now the issue is if user types some text in the file
upload input field and click on upload button the screen hangs and it goes to infinite loop. It seems that the framework is not able to accept and check the arbitrary value entered by user.
Can anyone tell me how this can be sorted out?
Thanks
SudipHello Sudeep,
I have also faced the same issue and to me it seems an issue with the UI element itself. Please follow the following threads for more information:
[http://help.sap.com/saphelp_nw04s/helpdata/en/b3/be7941601b1d09e10000000a155106/frameset.htm]
and
[File Upload UI Element going in Infinite loop;
[upload UI element;
Hope this may be of some use.
Regards,
Gaurav -
SPNego - Login Screen Appears for IE Browser in Some machines.
Hi,
We've done the SPNEGO Implementation for Portal SSO.
All the settings related to KDC in AD server, Portal WAS and IE browser client settings have been done.
In most of the machines with WINDOWS XP SP2, portal login screen is not getting appeared in IE and so SPNEGO is working fine.
But in few machines with WINDOWS XP SP2, portal login screen appears although the IE client setting like adding the portal url in Security Local Intranet, enabling integrated windows authothentication, enabling automatic logon in intranet zone is done.
We have even followed the SAP Note 934138 and installed Microsoft hotfix KB899587, but still some machines with Windows XP SP2 are facing this issue.
Thanks,
Regards,
Aditya MetukulHI Aditya,
This might be due to proxy settings. Go to your IE -> Tools-> Internet Options -> Connections ->LAN settings -> If you are using Proxy settings then go to Advanced tab -> and add the portal URL under "Do not use Proxy servers for address beninging with".
Regards
Deb
Edited by: Debasish Sarkar on Dec 8, 2008 7:20 PM -
My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
I have some videos that are completely well shown when using any media player, but some parts of the video appear with red screens when I try to edit them on Adobe Premier. Does anyone knows the reason?
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
Plus, EXACTLY what are you editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download -
Hello
just did the the new upgrade and now half of my songs are not playing. A screen appears and says you need to search for your music in folders. What the heck happen with this ? Anybody have any issues too?This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
A text like box has appeared on the screen of my iphoe and this has to be over the app I want to use. I then have to double click on the icon for it to open. I cannot scroll across or down. I can access the apps but because it will not scroll I cannot access all of the screen. Can nayone help please???
It sounds like VoiceOver is partially on. First try triple pushing the Home button. This may turn VoiceOver off. If that doesn't work going to Settings/General/Accessibility and make sure VoiceOver is Off. Note you may have to use 3 fingers on the screen to scroll.
-
I recently got the iPhone 4S and for some reason the Settings button for the home screen has a little red 1.If anyone know why their is little red number1 and what I have to do it would be fantastic! Thanks :)
Hallo. I did it this several times and I have the latest update to iOS 6.0.1, but still the red mark 1 at the Settings icon. Do you have any other idea?
Thank's. -
I don't understand why recently with the new "pages" my computer stops responding. When I go to fix some grammar all of a sudden the little colored circle begins to appear and won't go away I restart my computer.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful. -
I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
But how actually can I debug or fix it? Thank you.Here are a couple suggestions:
1. Go into Settings > Safari and Clear Cookies Clear Cache
2. Fully close Safari: from your home screen, double tap your home button and the most recently used Apps will show up. Hold your finger on the Safari App until all Apps start jiggling. You'll see a minus sign on the upper left side of Safari. Touch the minus and Safari will fully close. Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
3. Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
After iPad comes back up, try Safari again, and you should be good to go. -
I pulled my launchpad icon formt he dock bar to the main screen and a little pop sound and a little puff of smoke appeared on the screedn and it dissappeared. I want to bring back the launchpad to the dock bar. Where did it go and how do I get it back on my screen?
1. It's gone. Shortcuts like it disappear without confirmation when dragged out.
2. Choose Applications from the Finder's Go menu and drag it back.
(85989)
Maybe you are looking for
-
I am about to comence my Edit, and was told of Mpeg Streamclip, however this doesn't seem to work with my Canon XF305 Clips, the reason I was told to use it was so I wouldn't have to Render in Final Cut Pro all the time.. I do have the Canon Disc wit
-
Snowman wrote: Guidelines · DO NOT post full resolution screenshots! You can use the "mogrify" command (pacman -S imagemagick) to make a thumbnail of your screenshot: $ cp screenie.png thumb-screenie.png $ mogrify -resize 20% thumb-screenie.png Twen
-
Helllo. I am a new user with mac, and i have purchased two macbook pro and both of them have the same application and programs! the one is fast like a rocket, and the other one is very slow! Even when i want to open finder, i have to wait 5-10 second
-
Need help flushing background image to top of browser window
OK, this may be a very common problem, I'm just an idiot. In Dreamweaver I have a background image in a centered div on the page. Can anyone help me get that div to the absolute top of that screen? I've already set the body tag to 'margin=0 padding=0
-
Migrate VM´s from 2.2.2 to 3.1
Hi, I need to now whats the best way to migrate our running VM´s from old OVS 2.2.2 to a new system OVS 3.1. We installed a spare system with OVS3.1. I found a meta link note to save the VM´s as a template and to clone to the OVM 3.1 servers. How to