Some things about my ZE

First of all, why can't i manage all the files how i want to in the explorer? I can't cut and copy the mp3 files where i want.. I had a map with a couple of submaps in it (sorted by album and genre). When I imported all those files to my ZEN, it put all the submaps in the folder music all the mp3's from the main map in the map MP3.. The submaps in the music folder aren't even viewable when from my ZEN.
Second of all, the date and time is wrong on my player, but i can't seem to adjust it anywhere.. Any idea how I can do this?

Here?s how to set the clock:
Navigate to the top level menu > System > Clock Settings > View Clock
While the clock is displayed, press & hold down the ?back? button (the button below the play/pause button). A menu will pop up allowing you to change the clock date/time and format settings.

Similar Messages

Can i know some thing about unicode errors

can i know some thing about unicode errors

Hi,
UCCCHECK is to check if all your programs are UNICODE compatiable.
Now UNICODE means
Unicode - Overview
Before release 6.10, SAP supported different codes for representing characters of different fonts, for example ASCII, EBCDIC as single-byte code pages or double-bytecode pages:
ASCII (American Standard Code for Information Interchange) encodes every character with one byte. This means that a maximum of 256 characters can be displayed (strictly speaking, standard ASCII only encodes one character using 7 bit and can therefore only represent 128 characters. The extension to 8 bit is introduced with ISO-8859). Examples of common code pages are ISO-8859-1 for Western European, or ISO-8859-5 for Cyrillic fonts.
EBCDIC (Extended Binary Coded Decimal Interchange) also encodes each character using one byte, and can therefore also represent 256 characters. For example,EBCDIC 0697/0500 is an IBM format that has been used on the AS400 platform for Western European fonts.
Double byte code pages require between 1 and 2 bytes per character. This enables the representation of 65,536 characters, of which only 10,000 to 15,000 characters are normally used. For example, the code page SJIS is used for Japanese and BIG5 for traditional Chinese fonts.
Using these character sets, all languages can be handled individually in one ABAP-based SAP system. Difficulties arise if texts from different incompatible character sets are mixed in one central system. The exchange of data between systems with incompatible character sets can also lead to problems.
The solution to this problem is the use of a character set that includes all characters at once. This is realized by Unicode Unicode (ISO/IEC 10646) . A variety of Unicode character representations is possible for the Unicode character set, for example UTF, in which a character can occupy between one and four bytes.
From release 6.10, the SAP NetWeaver Application Server supports both Unicode and non-Unicode systems. Non-Unicode systems are conventional ABAP systems, in which one character is usually represented by one byte. Unicode systems are ABAP systems that are based on a Unicode character set and which have a corresponding underlying operating system, including a database.
Before release 6.10, many ABAP programming methods were based on the fact that one character corresponds to one byte. Before a system is converted to Unicode, ABAP programs must therefore be modified at all points where an explicit or implicit assumption is made about the internal length of a character.
ABAP supports this conversion using new syntax rules and new language constructs, whereby emphasis was placed on retaining as much of the existing source code as possible. As a preparation for the conversion to Unicode - but also independently of whether a system will actually be converted to Unicode - the checkbox Unicode checks active can be selected in the program properties. The transaction UCCHECK supports the activation of this check for existing programs. If this property is set, the program is identified as a Unicode program. In a Unicode program, an additional stricter syntax check is performed than in non-Unicode programs. In some cases, statements must also be enhanced by using new additions. A syntactically correct Unicode program will normally run with the same semantics and the same results in Unicode and non-Unicode systems. (Exceptions to this rule are low-level programs that query and evaluate the number of bytes per character). Programs that are required to run in both systems should therefore also be tested on both platforms.
In a Unicode system, only Unicode programs can be executed. Before converting to a Unicode system, the profile parameter abap/unicode_check should be set to "ON" so that only the execution of Unicode programs is permitted. Non-Unicode programs can only be executed in non-Unicode systems. All language constructs that have been introduced for Unicode programs can, however, also be used in non-Unicode programs.
It has been established that existing programs that have been programmed with no errors mostly fulfill the new Unicode rules and therefore require very little modification. Conversely, most programs that require significant changes are due to an error-prone and therefore questionable programming style. Even if you are not planning a conversion to a Unicode system, Unicode programs are preferable because they are more easily maintained and less prone to errors. Just as outdated and dangerous language constructs are declared obsolete and are no longer permitted for use in ABAP Objects, the rules for Unicode programs also offer increased security when programming, for example when working with character fields and mixed structures. This applies particularly for the storage of external data (for example using the file interface), which has been completely reviewed for use in Unicode programs. When creating a new program, SAP therefore recommends that you always identify the program as a Unicode program, and older programs can be converted to Unicode in stages.
Regards,
Shakir

Re: want to Know Some thing about Following

Hi
I am New to reports and don't know waht are the function of these menu's
Tell Me more about these.
1) File -----------------> Distributions ?????
2) Program ----------------> Tracing???
3) Layout ----------------> Anchor??
and a property
Base Printing On
I am using Oracle 9i DS!!
Edited by: user13642851 on Apr 11, 2011 12:38 AM

Reports comes with an online Help:
"Report distribution enables you to design a report that can generate multiple output formats and be distributed to multiple destinations from a single run of the report. You can create distributions for an entire report, and for individual sections of the report."
"The best way to monitor your report's performance is to trace report execution."
"Anchors are used to determine the vertical and horizontal positioning of a child object relative to its parent. The end of the anchor with a symbol on it is attached to the parent object."
"The Base Printing On property is the object on which to base the Print Object On property of the current object. For example, if you specify a Print Object On of All Pages and a Base Printing On of Anchoring Object, the current object will be triggered to print on every logical page on which its anchoring object (parent object) appears. "

Some thing about Credential store

Hi,
I'd like to ask a question about Credential store .
there are many repository password stored in oracle.bi.enterprise,
'repository.SampleApplite' for example,the repository password is 'Admin123'
I want to ask the password stored in this Credential store is the same as repository password???
If I changed this password in Credential store .What is going to affect???
thank you in advance!

Hello,
Yes you can change the repository password from credential store per guide below using updateCred.
http://docs.oracle.com/cd/E14571_01/bi.1111/e10540/mngreposfiles.htm#autoId19
http://docs.oracle.com/cd/E21764_01/core.1111/e10043/csfadmin.htm#CACCGBJE
Also refer to Mead's post for checking whats changes you made for the password for that key = repository.SampleAppLite
http://www.rittmanmead.com/2011/04/oracle-bi-ee-11g-migrating-security-credential-store-part-3/
Hope this helps. Mark if it does.
Thanks,
SVS

SOME THING ABOUT THIS FORMAT?

PLZZZ HELP ME ABOUT IT'S QUERY AND STYLE?
STUDENT A OBTAINED MARKS
SUBJECT 55
ASSIGMENT 17
CLASS BEHAVIOUS 15
STUDENT B OBTAINED MARKS
SUBJECT 55
ASSIGMENT 17
CLASS BEHAVIOUS 15

What you ask is how to create a sql query. Doesn't the wizzard for a report help you when you choose as datasource sql?
For a good query i have to know how the metadata of your database looks like but a simple query would be:
select t.some1, t.some2, t2.some3
from
table t, table t2
group by
some3

Some thing about google sheet menu can't popup, enter and don't show up?

about google sheet menu can't enter and use.

Can you give more details about your problem and possibly attach a screenshot?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Some information about SUN IDM

Hi,
I am new in IDM and want to know some thing about it.
1. Is it free software to impliment in any organigation.
2. From where i can down load it.
Thanks......

its listed in the JAVA enterprise software... under identity management.
go to downloads... & you can download them....
for info to work on... theres a long way ahead of you SIR.....
Docs, forums... etc would be the best source for more info...

Some question about about remote method call!

I am planning to write a program like this:
in my local computer,I want to type some commands to let my remote computer to execute some programs and send back the results back to me.
Is it some thing about the java.rmi??
If I want to get started,how should I do.
I shall show my warmly thanks to whom can give me some simple code examples.
Thanks in advance!

Sorry, I don't have any code examples available, but a good place to start is the RMI-tutorial:
http://developer.java.sun.com/developer/onlineTraining/rmi/

I am hearing some not-so-good things about Verizon.

I am hearing some not-so-good things about Verizon. Why aren't I hearing about the new pricing from you? If I have to pay more than I am now, I will switch providers in December when my contract is up. I have put my phone as a priority and food on the back burner!!!!!!!!! Let's hear it from the horse's mouth!!!!

I want information...from Verizon...do you work for them? I also want to hear from other people about their opinions/questions on the subject...I watch Robyn Meade in the morning and on that news program, they were talking about AT&T and Verizon increasing their charges for data...T-Mobil and Sprint won't be doing that. They were just warning us...their info is pretty reliable. I just want to hear it from the horse's mouth and know the truth about what is coming up. I have found that I have to check on things and double check, so I don't get "half" the info I need to make a good decision. I am not wealthy, and need to protect my priorities. I have been satisfied with Verizon service so far...just don't want any surprises. My contract is due to expire in Dec. so I need to make a decision about what service to use. I tried using the "chat" this morning and didn't get an answer, just a "link", so I am using all the avenues I can think of to
get the info I need.

HT203167 there is some one he stolen my I phone how i can delete the contact and Pic. from my I phone 4 and for your information i was not know any thing about I clude

Dear Mr. Apple there is some one he stolen my I phone 4 in Yemen- Aden, and Am now in Saudi Arabia i checked with the agent here in saudi arabia this agent i buy this i phone from them, they said we are sorry we can't to close your phone becouse he is out side Saudi Arabia so is there other way to close this phone becouse my frinde they are suffering becouse this boy he used in bad way, and i don't know any thing about i clude, so i didn't activate, so please please please if you can to disconnect my i phone becouse all my picture in i phone and if you didn't support me who will do it?
Please do the need full for this other wise am sorry to say that you are not support your customers.
Thanks and your fast replay that mean you are satisfied your customers.
<Personal Info Edited By Host>

All you can do is call the service provider that phone was being used with to cancel the phone account at least.
However, if you did not have a passcode lock on it, then the person with it has access to everything on it. You should immediately change all your email account passwords, and any other online account's passwords you used or had set up on the phone.
There is nothing you can do remotely to the phone now, and even cancelling the phone service account will not stop someone from using your emails and such on wifi. Changing your account passwords will lock them out of your accounts.

What are some good thing things about the 5s

What are some the good things about the iphone 5s

http://www.apple.com/iphone-5s/features/
http://www.apple.com/iphone-5s/design/
http://www.apple.com/iphone-5s/built-in-apps/
http://www.apple.com/iphone-5s/app-store/
If you can ask a more specific question, we can be more specific in our replies.
Regards.

HT1338 I currently have Snow Leopard and am thinking of upgrading to Lion but have heard some bad things about it. Should I upgrade or not? What do you like/dislike about Lion?

I currently have Snow Leopard and am thinking of upgrading to Lion but have heard some bad things about it. Should I upgrade or not? What do you like/dislike about Lion?

It is indeed all down to what you need to do with your machine.   Snow leopard is an excellent OS and as Baltwo suggests you have to check out your current apps and programs because PPC won't work on any higher OS than the one you have.
Andy's comment is very interesting and, I suspect, insider knowledge based    Certainly I would wait for Mavericks now it is on the horizon ... and then add six months or so for the bugs to be ironed out.
Good luck, whatever you do.   I'm staying with Snow Leopard.

The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

You hit the target CT.
It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
I hope to make some sense here.

For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

Now I also know about pulling the message to the left to see the time stamp. Good to know, although I preferred it being right where I could see it without having to do a swipe or keystroke.

Some questions about TLF component

Hi,
I'm using the TLF component (v. 0.207.0) in a Mac OSX and I've encountered with some things that I can't resolve.
(First at all sorry about my english)
- I'm trying embed some fonts with the component (Univers LT 55 Roman and Univers LT 65 Bold, for example). When the file is published, Univers LT 65 is correctly embedded but Univers LT 55 is not, even bought in the same package family font. With other fonts I have the same problem. In Mac the default font is very similar (even antialiasing is not working, its readable) but in Windows it shows an Time News Roman or similar. Actually I'm using the Helvetica Neue, is very similar to the Univers 65 and dont have this problem. Is this a problem from the font name? from the opentype font? or the embedding thing or something?
- The font type it is showing in the stage is the default one? Can flash (or the component, I don't know) render the embedded font? I really would like see my paragraph real size.
- Now or in the future the component could link the containers and flow text in? (maybe can now and I dont now!)
- When write a looong text in the component panel and the component is placing in the stage and it is very long too, I can't do scroll the text in the panel. When the stage component is very short there not problem, selecting the text I can scroll down.
- Can I change the text layout component background color? If my text is white I can't see it.
- If I have a text in japanese can I embed only this characters? I can use a range with
[Embed(systemFont="--", fontName="--", mimeType="application/x-font", unicodeRange="U+0041-U+005A")]
or include in the unicodeRange every character. There are another way?
I really apreciate your effort building this library, until now Flash always was weak with the text thing, specially with languages as japanese.
I was in the speech who Nat McCully did about the TLF in F-site in Tokyo and I relly excited about the TLF.
From now I would like to try more the script than the component, maybe there some more questions coming...
Thanks in advance.

Try adding the images to the container dynamically
var img : Image = new Image();
img.load("{appURL}+{data.picname}")
img.addEventListener(Event.COMPLETE,imageLoaded);
private function imageLoaded(event:Event):void
var img : Image = event.currentTarget as Image;
// now add the img to the container
cheers
Varun Rathore
http://www.vrathore.blogspot.com

Some things about my ZE

Similar Messages

Maybe you are looking for