Some top navigation disappears when site collection is made read-only

I have a publishing site that displays the navigation across the top the site, and shows all subsites and pages below. This all works (worked) OK.
I had to make the site collection "read only" for a certain purpose, and I have found that now the top navigation for two of the sites now no longer displays. All the rest (5 other subsites) are OK.
There is a "tab" that displays that takes me to the root page (/Pages/default.aspx) of the two subsites in question, but none of the pages below it display in the navigation. If I take off the "read only" status of the site collection,
they re-appear in the navigation.
Any ideas about the cause of them disappearing from the navigation when read only? The pages are not checked out.

Hi ,
It seems that the default.aspx page in these two subsites "Pages" library is created directly or copied through SharePoint Desinger root folder, for solving this issue, you can
check-out then check-in this default.aspx apge as major version, then when you set the site collection "read only", the default.aspx and other pages in "Pages" will still appear
in root navigation dropdown for these two sbusites like other three sites, assume that you have set the navigation showing pages for these two subsites.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Similar Messages

Powershell script for removing some users from a particular Site Collection

Hi,
I am looking for a PowerShell script to delete a few users from a particular Site Collection. I am unable to delete them from/_catalogs/Users/simple.aspx page therefore need some other medium to
delete users from the site collection.
My ultimate aim is to have no user profile with "tp_deleted" field's value as 0 in the USERINFO table. Currently there are about 40 odd users with this field's value as 0 and this is affecting my crawling of this content database.

Thanks for the reply Alex & eHaze,
I have a content source of root site which crawls all the site collections under it. Out of the 9 site collections, only 8 are getting crawled and 1 doesn't get crawled at all. The error in the crawl logs is
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: Value does not fall within the expected range. )
I tried a lot of things, searched over the net and finally found
this which helped me solve the same issue in my development environment. I deleted these users from userInfo table and ran a full crawl. And the issue was fixed.
Now since I cannot delete the users from userInfo table directly from PROD environment, I used .../_catalogs/Users/simple.aspx list
to delete users from this site collection. While some of the users I could delete, quite a few I could not. Clicking on the profile redirected me to the home page rather than the info page of the profile.
This
is why I have to delete these users from the site collection.
Alex - the link you shared, I guess it is for a web application level.
eHaze - the script you shared throws this error:
Get-SPSite : Cannot find an SPSite object with Id or Url: http://dev-apps/divisions/BT. At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:4 char:19
+ $site = get-spsite <<<< $siteURL
+ CategoryInfo : InvalidData: (Microsoft.Share...SPCmdletGetSite:
SPCmdletGetSite) [Get-SPSite], SPCmdletPipeBindException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletGetSite
You cannot call a method on a null-valued expression.
At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:9 char:27
+ $site.SiteUsers.Remove <<<< ($LoginName)
+ CategoryInfo : InvalidOperation: (Remove:String) [], RuntimeExc
eption
+ FullyQualifiedErrorId : InvokeMethodOnNull
hope this info helps.

Some iCal events disappear when in week view

Hello all,
I recently had a double agenda booking. Today I found out why:
In week view some iCal events disappear... When i switch to month view, they reappear.
So, depending on the view i have open time slots. Not very reliable.
Anyone know what i can do to return to solid bookings again?
Best regards
Fred

Same problem here. I just imported everything from my old MacBook to my new one using Time Machine. My events appear in the Month view but not in the Week or Day views. So I went back to my old MacBook, created an iCal backup file, and emailed it to myself. Opened it on the new machine, restored from the backup file, and . . . same thing!
Very strange!! I need my daily events to be visible. Any help out there?

Error raised when opening physical standby in read only

Hi,
I've a physical standby 11.2.0.2 created using RMAN duplicate from active database which is configured with data guard. When I open the database in READ ONLY mode
SQL> alter database open read only;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY
I get this error in the alert log
Physical standby database opened for read only access.
Fri Aug 12 15:14:01 2011
db_recovery_file_dest_size of 256000 MB is 4.72% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Errors in file /oradata/admin/ORAINT/diag/diag/rdbms/oraintsb/oraintsb/trace/ora intsb_ora_8692.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-00931: missing identifier
ORA-06512: at "SYS.DBMS_UTILITY", line 156
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 72
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 84
ORA-06512: at "SYS.PROC_PKGS_KEEP", line 26
ORA-06512: at line 2
Completed: alter database open read only
the tracefile is showing this,
Trace file /oradata/admin/ORAINT/diag/diag/rdbms/oraintsb/oraintsb/trace/oraintsb_ora_8692.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /opt/oracle/product/11.2.0/ORAINT
System name: Linux
Node name: c4p-db01
Release: 2.6.18-194.0.0.0.3.el5xen
Version: #1 SMP Mon Mar 29 18:27:00 EDT 2010
Machine: x86_64
VM name: Xen Version: 3.4 (PVM)
Instance name: oraintsb
Redo thread mounted by this instance: 1
Oracle process number: 17
Unix process pid: 8692, image: oracle@c4p-db01 (TNS V1-V3)
*** 2011-08-12 15:14:03.367
*** SESSION ID:(24.1) 2011-08-12 15:14:03.367
*** CLIENT ID:() 2011-08-12 15:14:03.367
*** SERVICE NAME:(SYS$USERS) 2011-08-12 15:14:03.367
*** MODULE NAME:(sqlplus@c4p-db01 (TNS V1-V3)) 2011-08-12 15:14:03.367
*** ACTION NAME:() 2011-08-12 15:14:03.367
Error in executing triggers on database startup
*** 2011-08-12 15:14:03.367
dbkedDefDump(): Starting a non-incident diagnostic dump (flags=0x0, level=0, mask=0x0)
----- Error Stack Dump -----
ORA-00604: error occurred at recursive SQL level 1
ORA-00931: missing identifier
ORA-06512: at "SYS.DBMS_UTILITY", line 156
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 72
ORA-06512: at "SYS.DBMS_SHARED_POOL", line 84
ORA-06512: at "SYS.PROC_PKGS_KEEP", line 26
ORA-06512: at line 2
if I disable the system triggers using
ALTER SYSTEM SET "_system_trig_enabled"=FALSE scope=both;
The error doesn't appear but when trying to switch to active dataguard the open_mode goes from READ ONLY to MOUNTED rather than READ ONLY WITH APPLY
Any help much appreciated
Edited by: phil74 on 12-Aug-2011 07:22

Have you checked what your guard status is set to?
SQL> SELECT guard_status from v$database;I've had a similar issue before but with a standby, whereby the status was set to ALL. This means all users apart from SYS are unable to make changes on the database.
My resolution was to set the status to standby:
SQL> ALTER DATABASE GUARD STANDBY;You may wish to set the guard status to NONE however.
I took some notes:
http://juniororacledba.wordpress.com/2011/07/17/oracle-logical-standby-dataguard-error However, I do not have a link to any Oracle documentation on the subject to hand. But might give you a head start.

Should the Edit in Browser link appear when Office Web Apps is read only?

Hi,
We have deployed an Office Web Apps farm in read only mode for licensing reasons.
There is a binding between SharePoint 2013 and the Office Web Apps farm, everything is working well, except the option to Edit Office documents using Office Web Apps is quite prominent on the ECB menus and document previews.
Is anyone able to advise whether this is expected behaviour? When the link is clicked a friendly error message states that licensing doesn't support editing, which is correct. I'm just trying to see if the user experience can be improved by a setting that
we've missed somewhere along the line.
Thanks in advance.

Hi,
Per my knowledge, if you have configured Office Web Apps for SharePoint, the Edit in Browser option will appear in the ECB menu regardless of the licensing of the Office Web Apps.
So I recommend to use CSS code to hide the Edit in Browser option if you do not want the user to use it.
Edit the page of the document library view page, and then add a Content Editor web part to the page.
After that add the code below to the Content Editor web part:
<style>
a[Title="Edit in Browser"]{
display:none !important;
</style>
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Why did some events & photos disappear when I moved library to X drive

I tried to free up some storage on my computer. I followed the IPhoto Help instructions and moved the I photo library picture package to my Xternal hard drive. When I open it from there (or from the Hard Drive where I copied it back again)...some photos only show up when I view the entire photo collection. They do not show up as events and they do not show up when I click them to open for editing. Just black space. They do show up in the thumbnails in the books I'm creating and in the books. Why can't I click and edit them? They also will not export to the desk top.
Once again I have messed up in an attempt to do what seemed like a good idea. Any help would be greatly appreciated.

Option 1
Back Up and try rebuild the library: hold down the apple and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Shadows disappearing when PDF/X-1 made?

Ive created a file in InDesign CS3 with some simple swooshes at the bottom... All art was created in InDesign (not placed from Illustrator). I need to create a PDFX-1 file from this for a vendor.... However, when I do this, I lose the shadows on swoosh.
Ive exhausted my knowledge of what to do... Which has included:
- changing the drop shadow settings (normal and multiply, honor effects, knockout...)
- adjusting the shadow effects from object to fill
- export the graphic from InDesign as an EPS, then place this EPS
- restarting my computer, and using a coworkers computer
The one thing I have not yet done is try exporting the problem artwork as a hires jpg and then using that. (I'd prefer not to do this as another vendor is producing the rest of the kit and it would be a HUGE undertaking to modify all the other pages just to match the methods used for this page.)
Ironically, the low-res PDF accomplishes what I need perfectly, but of course at the sacrifice of the other images on the page.
(If only this vendor would accept my InDesign files - they look/print perfect!)
Thank you for any tips or insight you may have!

Are your colors process colors or spot colors? If you have spot colors interacting with transparency like drop shadows, you'd need to turn on overprinting to preview and print it.
One workaround would be to convert your colors to process colors.

Made cookies.sqlite read-only, it's gone when I returned to unmake read-only

=======
See the solution at the end of this post
=======
Not sure now what I tried to accomplish with this move, in Ubuntu 12.04 and Firefox 23 as my current browser version. Whatever, it did not have desired effect, Firefox will not save any cookies past the session anymore.
I have these files in my profile starting with "cookies" in the name:
cookies.sqlite.bak
cookies.sqlite.bak-rebuild
cookies.sqlite-shm
cookies-sqlite-wal
I was going to ask this question, and looking in the profile to see what I have there, I closed Firefox and renamed cookies.sqlite.bak to cookies.sqlite. Opened Firefox and I see cookies.sqlite missing and again there is a cookies.sqlite.bak.
This time, with the browser open on this question-in-progress, I copied cookies.sqlite.bak to cookies.sqlite.bak (copy) and renamed that to cookies.sqlite. It has read-write permissions and it remains to be seen what happens when I close the browser and reopen it.
My privacy setup is set to accept all cookies, including third-party, and to discard cookies when I close Firefox.
CookieMonster is used to override Firefox default for those sites where I want to accept cookies so I can keep site preferences or to stay logged-in. CookieMonster is not being obeyed, the cookies are discarded.
==========
Solution
==========
Based on the answer in the third post in the thread, from the top two lines of Cor-el's post, I have cleared my problem with just the removal of all files with "cookies.sqlite" at the beginning of their names, closing and restarting Firefox. Firefox recreated all the names, and the new cookies.sqlite has read-write permissions without my setting them.
In the Privacy tab under Edit > Preferences:
Firefox is set to use custom settings for history, and I accept all cookies, including third-party, and keep them until I close Firefox.
I use the CookieMonster add-on to override this default setting on selected sites, so I can keep their cookies from one session to the next, which saves some site preferences, and keeps me signed in to my web site.
Back on the Privacy tab, I clear history when Firefox closes, but in Settings, I do not include cookies. (I include cache and offline website data.)
To include cookies here would cause Firefox to dump ALL cookies at the end of the session including those which save my site preferences and keep me logged in via settings in CookieMonster.

Indeed the cookies.sqlite is the only file remaining of the cookies family of files when I close Firefox.
Thank you for your assistance Cor-el!

CRIO startup directory was typed STARTUP and now will not boot. How do I recover from this error or how do I rename the directory when my proxy server is read only due no startup files?

I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but I can't get it to respond to commands even though I can see the processor boot.

lockmas wrote:
I loaded files on the cRIO but used upper case letters for the startup directory. Now I cannot access the RIO since it didn't boot. The proxy server comes up read-only so I can't reload the files or change the directory. I tried the RS232 port but I can't get it to respond to commands even though I can see the processor boot.
There is NO need to put your entire question into the subject line of your post.
cRIO will not boot is a suitable subject line

User Profiles are the wrong style after importing/migrating site collections from other SharePoint versions

I manage a couple of different version of SharePoint, which we are in the process of migrating to SharePoint 2013. I have a problem which I am not sure how to resolve. We are using MetaLogix to migrate site and site collection data from an older SharePoint
2007/WSS3.0 server environment into our new SharePoint 2013 environment and we are having a problem with user profiles that get created.
I have SharePoint 2013 set up for "SharePoint Profile Synchronization" and some of our user's profiles are being created in an older format that shows the user's claims account information, rather than the more fancy profile type that allows us
to include pictures and click on "follow this person" links.
If we manually delete the profile, it will be recreated properly however, as we are migrating many sites and collections over, it is near impossible to do this and keep track of each user so that their profiles can be deleted and recreated.
Is there some way to change this behavior so that SharePoint will only create the newer style of user profile?

These 'profiles' are you looking at them in the User Profile Service Application itself or are you looking at site collections? There is a huge difference between the two but people often miss it.
In most cases you'll have some partial information on the Site Collections but when you click through to their actual profile (not just their User Information List entry) you'll see the prettier version. That information is normally internally synchronised
by a timer job but that may not have run yet and/or the fact that your users haven't actually used the site may be causing it not to update them (it's an efficiency matter).
Finally: Drop your sales guy at Metalogix an email, they will bounce it to one of their techies and they'll have seen it a million times.

Problem with setting Created, Modified, Author, Editor on file i Site Collection from Client SDK

Hello,
I have a piece of code that is used for converting files from a shared file area to SharePoint for customers that move to SharePoint and Dynamics CRM. The relation to Dynamics CRM calls for using custom code an not existing conversion tools.
The code I wrote works fine if the file sent to a regular site in SharePoint, but if I try to use the same code for files in the Site Collection. If I use the address for the site collection in the constructor for the ClientContext, and the relative URL
from that for the file, both the upload and the setting of the attributes fails (I do make sure the file is there before trying to set the attributes).
After some experimentation I am able to upload the file, by creating the client context with the main site URL, and adding the site collection path elements ("/sites/crm") to the path for the file, but using the same the setting of the attributes
fails.
I have tried some other variant where the site collection elements are in the path for both the ClientContext and the file path. Then the upload fails, the file retrival (GetFileByServerRelativeUrl) works, but the retrival of the attributes then fails.
The code below illustrates the variations.
Can someone please explain what I am doing wrong, or is this a bug in the SDK?
Regards
Anders
using System;
using System.IO;
using System.Security;
using Microsoft.SharePoint.Client;
using File = System.IO.File;
using SP = Microsoft.SharePoint.Client;
namespace TestSharePointDocumentAttributes
class DocumentAttributeTester
public void Execute(string[] args)
string userId = args[0];
string password = args[1];
string filePath = @"C:\work\TestCV1.docx";
string siteUrl;
string documentPath;
string clientContextUrl;
string serverRelativeUrl;
DateTime createdDate = new DateTime(2013, 2, 1, 11, 20, 45);
DateTime modifiedDate = new DateTime(2013, 3, 1, 11, 40, 45);
string fileName = Path.GetFileName(filePath);
SecureString securePassword = new SecureString();
foreach (char c in password.ToCharArray())
securePassword.AppendChar(c);
// Pass 1, no site collection
Console.WriteLine("Pass 1");
clientContextUrl = "https://losangas.sharepoint.com";
serverRelativeUrl = "/crmn_candidate/TestSPAttributes" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
// Pass 2, site collection, parameters as expected, both upload and set attributes fails (even if file exists)
Console.WriteLine("Pass 2");
clientContextUrl = "https://losangas.sharepoint.com/sites/crm";
serverRelativeUrl = "/kontakter/N/Test1" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
// Pass 3, site collection, parameters adjusted. Upload works and set attributes fails.
Console.WriteLine("Pass 3");
clientContextUrl = "https://losangas.sharepoint.com";
serverRelativeUrl = "/sites/crm/kontakter/N/Test1" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
// Pass 4, site collection, parameters adjusted. Upload works fails, but GetFileByServerRelativeUrl succeds and load items fails
Console.WriteLine("Pass 4");
clientContextUrl = "https://losangas.sharepoint.com";
serverRelativeUrl = "/sites/crm/kontakter/N/Test1" + '/' + fileName;
upload(clientContextUrl, serverRelativeUrl, userId, securePassword, filePath);
setVariables(clientContextUrl, serverRelativeUrl, userId, securePassword, createdDate, modifiedDate);
Console.WriteLine();
private void upload(string clientContextUrl, string serverRelativeUrl, string userId, SecureString securePassword, string filePath)
try
byte[] fileContents = File.ReadAllBytes(filePath);
string fileName = Path.GetFileName(filePath);
ClientContext clientContext = new ClientContext(clientContextUrl);
clientContext.Credentials = new SharePointOnlineCredentials(userId, securePassword);
SP.File.SaveBinaryDirect(clientContext, serverRelativeUrl, new MemoryStream(fileContents), true);
Console.WriteLine("Upload successful.");
catch (Exception ex)
Console.WriteLine(string.Format("Upload error: {0}", ex.Message));
private void setVariables(string clientContextUrl, string serverRelativeUrl, string userId, SecureString securePassword, DateTime createdDate, DateTime modifiedDate)
try
ClientContext clientContext = new ClientContext(clientContextUrl);
clientContext.Credentials = new SharePointOnlineCredentials(userId, securePassword);
Microsoft.SharePoint.Client.File uploadedFile = clientContext.Web.GetFileByServerRelativeUrl(serverRelativeUrl);
clientContext.ExecuteQuery();
ListItem listItem = uploadedFile.ListItemAllFields;
List list = listItem.ParentList;
clientContext.Load(uploadedFile.ListItemAllFields);
clientContext.ExecuteQuery();
FieldUserValue author = FieldUserValue.FromUser("Elisabeth Skaane");
FieldUserValue editor = FieldUserValue.FromUser("Elisabeth Skaane");
listItem["Created"] = createdDate.ToString("MM.dd.yyyy HH:mm:ss"); // i.e. "6/5/2012 10:19"
listItem["Modified"] = modifiedDate.ToString("MM.dd.yyyy HH:mm:ss"); // i.e. "6/5/2012 10:19"
listItem["Author"] = author;
listItem["Editor"] = editor;
listItem.Update();
clientContext.ExecuteQuery();
Console.WriteLine("Set attributes successful.");
catch (Exception ex)
Console.WriteLine(string.Format("Set attributes error: {0}", ex.Message));

Hello,
Thanks for your effort, but you are not addressing the problem.
As I tried to explain, setting the date works fine in the case where there is no site collection involved. There is no reason to believe that this will be different when in a site collection. Also the logon works fine in borth cases. The FieldUserValue.FromUser
can take either an email, or a prefered name. I tested both.
Anders

Document ID moving across the site collection

Thanks for reading, let me explain my scenario before my question
1. we have huge site collection with full of documents
2. want to enable document id feature to track of documents
3. we want to run the process to archive docs which are older than 6 months into different site collection.
4. after 2 years, we will have 4 archived site collections, documents are spread across the various site collection
Does document id move across the site collections, still users can get old document using initially assigned document id after archive into different site collection?
I read some documentation on document iD that it is targeted for Site Collection level.
S.Venkata Appaji

Hi Appaji,
According to your description, my understanding is that you want to preserve the Document ID when moving the documents across site collections.
Per my knowledge, the document id will be preserved when the document has been moved from one Site Collection to another Site Collection.
During move operations, SharePoint Server 2010 keeps the document ID. During copy operations SharePoint Server 2010 assigns a new document ID. You can control this by setting a Boolean operator on the PersistID column.
More references:
http://msdn.microsoft.com/en-us/library/ee559302(v=office.14).aspx
http://www.sharepointeurope.com/blog/2013/6/26/sharepoint-moving-a-document-with-a-document-id-to-another-site-collection
Best regards.
Thanks
Victoria Xia
TechNet Community Support

CS6: Application menu disappears when document size is maximized

Whenever I maximize a document in Illu. CS6 it overrides the application menues! It simply covers my whole screen making it impossible to reach my menues unless i drag the documents corners to make it smaller or click the minimize icon. Is it supposed to be like this? Very annoying.

Well, I remember having a chat about fullscreen views when CS5 came out cause there was reports of simmilar problems and I had some instabilites myself, I actually placed an international call to Adobe in Ireland cause I had just bought the CS5 MA Collection (Not cheap as you may know) back then and the correspondance actually ended up with me having to return the hard copies in return for a new one. when I installed that new software I didn't experience the same problem. Now I have a brand new CS6 MA Collection bought in 2014 and the fullsize issues are even worse, meaning they are constant. It is hardly my macines Larry cause as mentioned I've installed this MA Collection on two different machines. Both of them high-end graphic stations that way exceeds Adobes minimum hardware requirments. I chose to keep my XP 32-bit license on one of them cause I enjoy that OS, the other is a W7 machine. They are not connected in any way, they are stand-alone clients and it's just too strange if both machines should be the weak spot here. I don't think so. I've been Goggling around about this particulare problem and I'm not alone experiencing the same things, it's about time Adobe made a bugfix and sorted this out, cause its developed into a major fault.
I posted this problem here on this forum just in case someone could deliver a spesific problem solver that could temporarly fix the issue, a new upgrade file or something, getting in touch with Adobe has become all impossible. All I get is some ignorant indian support worker sitting in New Dehli reading from a pre-made script. It's almost comical. I'm pretty sure this is a class A bug in Illustrator, more so now than ever. Unless someone had a definitive plausable cause description to why this is happening on two different machines. I have a corp. licens so I can install on more than two clients, I will install Illustrator CS6 on a third machine with W7 tomorrow. My best guess is that it won't solve anything, if Adobe don't man up and fix this bug I will be forced to return my Master Collection cause this error is just way to massive to deal with in silence. It's like buying a car that only turns left.

The following location is not accessible, because it is in a different site collection

Hi,
I have an InfoPath full trust form which has been uploaded to the Central Administration. I activated the form in a Form Library using Content Management. Unfortunately, when I try to load the InfoPath form in the public machine, it throws for the error below:
The following location is not accessible, because it is in a different site collection: http://109.91.111.45:8080/sites/sbc/Success/Forms/AllItems.aspx.
Can someone please help?

Please read the below scenario may be what LarsLL & Derek are referring to.
For Example:
Consider a Farm where we have one App server & one WFE. If we create a Web Application in App Server the url will be like
http://<<appServerName>>:12345/
We can access the site using the WFE name also like this
http://<<WFE ServerName>>:12345/ but when the user tries to access the form from this site we may get this error.
To resolve this create an Alternate Access Mapping for the site at
http://<<WFE ServerName>>:12345/ to ensure this site can be resolved by InfoPath.
Cause:
This happens when InfoPath tries to load the Form. It would try to verify if the Site collection exists. Read the article here
http://support.microsoft.com/kb/981854 for more information.

Style EDIT LINKS pencil button in top Navigation

On the top navigation of my site I've styled the menu with CSS and a custom master page. However the 'EDIT LINKS' pencil button is an image coming from spcommon.png as an HTML <img> and it is an incorrect color.
How to do I change this image or replace the spcommon.png with my own version?

Hi Justin,
The icons in SharePoint sites are generated via sprites, you could type the url in the picture in your original post :
http://sp/sites/sitename/_catalogs/theme/Themed/
D9FA9D0B/spcommon-B35BB0A9.themedpng?ctag=5
It will display a picture as below, and different themes have different pictures like this.
You could use SharePoint Color Palette Tool to generate theme as you like. Then import the file into the Themes Library :
http://sp/sites/sitename/_catalogs/theme/Forms/AllItems.aspx .
The link below provide more detail information for your reference:
http://blogs.c5insight.com/Home/tabid/40/entryid/392/Update-Default-SharePoint-2013-Icon-Colors.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Some top navigation disappears when site collection is made read-only

Similar Messages

Maybe you are looking for