Some UI controls not displayed properly on Windows Mobile 5.0

Hi All,
I had developed an application which works fine at Window 2003 edition but when we try to run it on windows 5.0 then some of the controls do not appear.
Can some one help me out to figure where the basic problem is.
Thanks
Akhil

Hi Akhil,
Windows 5.0 is expected to have a performance degradation over Window 2003, but that is due to change in Windows I/O architecture.
Windows 5.0 requires MI Client of SP 17 level or higher, please make sure you have that on your client device. And the Creme version should be 3.27a and higher.
In case the check is good, would it possible for you to provide me few details of what type of controls are not getting displayed?
Regards,
Rahul
Message was edited by:
Rahul Gavande

Similar Messages

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Some websites do not display properly or function

Using Firefox v29.0.1; running Win 7 Pro 64-bit version.
Some websites do not display properly - as if Firefox is not finding the CSS (Facebook for one).
Also, on Craig's List, I can't click on any of the links including the contact/reply button.
Wanted to attach screenshots but see no place to do so.
Thanks,
paulp575

Looks like something in my history must have been causing it.
That's the only step I needed to go through and seems as though everything has cleared up - for now.
Thanks Phillipp for your help!
paulp575

Compressed PDF file is not displaying properly in Windows 8 Reader app

Hi,
We have compressed a PDF file using some third party library. The compressed file is displaying properly, when we're opening the file with ADOBE reader. The same file is displaying blank, when we're opening the file with Windows 8 reader.
Can anyone help us to solve this issue?
Regards,
Kamaraj P

Hi Puneet,
Thanks for your reply.
I have shared the skydrive link of PDF files which are not opened properly with Windows reader.
https://skydrive.live.com/redir?resid=2BA789F8EDB6510C!228&authkey=!ADyKA-JLOFDTqyI
Flowers.pdf is not displaying correctly and Tiger.pdf is displaying as blank in Windows reader. But both are displaying correctly in Adobe reader.
We have used LeadTools 14.5 library to compress the pdf files.
Regards,
Kamaraj P

WEB Forms do not display properly with windows 95 LARGE fonts desktop setting

Hi,
We are using WEB forms 6.0 patch level 6 (We tried 6i but had too many bugs with it, we prefer to wait until at least a couple of patches are out, installation was a VERY painful experience for us)
We still have the following problem with WEB FORMS deployed on win95 desktops with LARGE FONTS destktop settings: The forms are not displayed correctly, sometimes there are no scroll bars, resizing a window gives weird results, part of the forms become inaccesible, some forms are blank, etc...
Can you verify or confirm that you have the same kind of problems ? We use jinitiator 1.1.18.
Is it fixed with 6i ? Is it fixed wit jinit 1.1.27 ?
We develop in smal fonts on win95 and recompile under solaris before deploying.
Thanks
null

Thank you all for your fast asnwers. The "Use hardware acceleration when available" was the problem, I disabled it and I will post a message on my site about this.
The site is on-line in the same aspect since 2005, modifiyng the whole site to fit with Firefox11's default setting is not a good option. At that moment, placing a tabel (alligned to the center of the page) and puting in it the thumbnails with links generated by ExpressThumbnailCreator, than manually adding the description in the HTML view of FrontPage was the simplyest way possible to make the site appear properly on my 800*600 px resolution I used then. Of course, I upgraded my hardware and software since then, but the site remained mostly unchanged (except the index and a few files). I know it's time for a new version of the site but... my web-design knowledges are limited to basic HTML.

Lion text problem: Some text does not display properly in Safari and Firefox

Hello
Some text in Safari and Firefox is seriously degraded, making it useless. I changed to Firefox because Safari was displaying wrongly, but Firefox displays the same way, so it seems to be an OS problem. See image as an example:
I cannot see subtitles on BBC streamed movies, and the timing of the movies on the bottom ribbon do not display correctly.
I am using Lion 10.7.5
Is there a solution for this problem?
Thanks for any help.

Unbelievable (and I still cannot believe that) - is wmode="transparent/opaque/etc" - not supported by safari ? then how do you suggest we go about transparent flash elements on web pages? why isn't it working on safari while on every other browser on earth it does?

CSS on some pages is not displaying properly on initial page load.

I'm running into an issue where a page loads and the styles do not render correctly. After the page loads, I can temporarily fix this by choosing: View->Page Style->No Style, then doing it again with: View->Page Style->Basic Page Style. Though when navigating away from the page and then coming back to it, I will have to do it over again.
I'm experiencing this issue on v. 36.0.3 for Windows and v. 36.0 for Ubuntu

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check the Net log and the Network log in the Web Console (Firefox/Tools > Web Developer) to see how long it takes for content to arrive.
*https://developer.mozilla.org/Tools/Network_Monitor
You can also try to reset (power on/off) the router and maybe check with your ISP if it happens on more than one OS.

BB Desktop will not display properly in Windows 7

I installed BB Desktop 7 on my Windows 7 64bit machine. It runs but the display is either all white or all black. How can I get desktop to display correctly?
Solved!
Go to Solution.

kevin3d wrote:
I installed BB Desktop 7 on my Windows 7 64bit machine. It runs but the display is either all white or all black. How can I get desktop to display correctly?
Hello kevin3d
Welcome to BlackBerry Support Forums
I suggest perform a Clean Uninstall of Desktop Software then re-install it again , for help refer to those Knowledge Base :
KB02206 : How to perform a clean uninstall of the BlackBerry Desktop Software
KB16236 : How to install the BlackBerry Desktop Software for Microsoft Windows
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Some websites do not display properly. I am getting overlapping of menu's. This does not happen with IE. What am I doing wrong?

I log on to the same wesite on Mozilla and IE. On mozilla the left hand menu overlaps one over the other but the same does not occur with IE, I ask this as I prefer mozilla. Do I need to change any configuration setting. I have a Dell Studio Laptop which is only about 5 months old. Unfortunately I cant post the url because it needs a password to get into the site.

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac) 
See http://kb.mozillazine.org/Zoom_text_of_web_pages
If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
See also [[Websites look wrong]

Having problems with text, some images are not displaying properly

when opening an image( as screenshot) in firefox support forum, the close button is not showing instead a number code is shown in a box

That is a font problem. 
It looks that the font that is used doesn't have a glyph for this character: &#x2716; - ✖
*http://www.alanwood.net/unicode/dingbats.html
You can consider to install the DejaVu font.
*http://www.alanwood.net/unicode/fonts.html
*http://dejavu.sourceforge.net/wiki/index.php/Main_Page
I see more little boxes with a hex code that indicate that the used font is missing those glyphs and Firefox doesn't seem to be looking for them in another font as would normally happen.

Japanese character is not displaying properly in JDialog

Hi All,
Japanese character are shown in parent window but not displaying properly JDialog window.
Even JDialog Title bar is showing in Japanese properly but JLabel's and JButton text are not showing properly in Japanese.
Anybody knows why Japanese characters are not showing properly in JLabel and JButton of JDialog window.
Thanks,
-Mani

Specified font on that objects, that's why Japanese character doesn't shown.

I've been using FCP 7 on my iMac for quite some time with great success. Lately I created a new project and the browser window does not format properly (it's O.K. for previously created projects). The effects window is also not displaying properly.

Help! My browser window is suddenly not formatting properly. (losing browser formatting, glitch, bug) I'm using FCP 7 on an iMac with OS X 10.8.5 and have been successfully doing so for a couple of years. I fear my Final Cut Pro is corrupt and I have to re-install. Anyone ever see this problem? Old projects display and behave fine in the browser, but any new project I create, totally loses the formatting in the browser and the browser also does not display the "effects" window properly anymore. (see below)

YOU ARE A LIFE SAVER! I reinstalled the program and everything. THANK YOU! THANK YOU! MY HERO!!!

Some HTML Emails Do Not Display Properly

Recently, some HTML emails do not display properly in Mail. All I see is HTML. Yet, 98% of my HTML emails render properly.
Any thoughts on why this happens with some emails? Is it a Mail issue or are these emails not coded properly?

Hello Tony.
Could be a combination but since Mail renders 98% of of all HTML messages properly (using Safari as the engine), this indicates it is a coding problem.
I'm not a big fan of using HTML with email since it introduces a number of problems. If everyone used Plain Text for message composition, the majority if not all problems experienced with email would be eliminated.

Hi my web hosting company irunsolutions.co.uk have informed me that my website does not display properly in firefox when run on a windows 7 32 bit platform.

website is www.empireembroidery.co.uk
does not display properly when viewed on 32bit windows 7 platform in firefox.

You can try these steps in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My.yahoo homepage is not displaying properly all of a sudden in windows 8

I don't think there was a change to my system unless it was a windows 8 update recently but my homepage, my.yahoo.com which I have been using for years is not displaying properly in Firefox oth 17.0 or beta release.
It works fine in chrome and IE on the same system.
Is this a issue with yahoo or Firefox? Any ideas on how to fix?

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove your yahoo.com cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Some UI controls not displayed properly on Windows Mobile 5.0

Similar Messages

Maybe you are looking for