Some urgent chart issues : Lost labels & erroneous decimal places

Hello everybody,
we have some new and really urgent problems with some charts.
Lost labels
Like you can see in the figure below, our charts sometimes loose some lables on the graphs.There are some different scenarios for the problem.
1) Two neighbouring bars have similar values and similar height. So the labels would overlap. In that cases, the charts loose one of the two labels. (see the yellow markers on the bars in the figure below)
2) A chart´s graph tends to the maximum scale of its surrounding container div. The chart components then often "decide", that they do not have enough space for a label and so do not display these labels (line in figure below).
Is there any possibility to fix these problems? Manipulating the charts via css doesn´t work, because the missing elements are not created at all. So there isn´t any element in the DOM that could be adressed.
Erroneous decimal places
In addition to the problems above, we have another one that causes ugly headaches. The values in some charts have 14 decimal places. Settings in the query (we use BW queries as DataSrc) or in the initial view are completely effectless. First we supposed that the problem correlates with some chart types, but in the meanwhile we get the problem with almost all types.
Is anybody out there with similar problems or any ideas to fix the problem?
Thanks so far & kind regars,
Sebastian

Hi Tammy,
thank you for your very quick response. I´m working with IE 10.0.9200 and Design Studio 1.2 SP1. The Application runs normally on a BOE-Server. but the problems occur even when i run the application locally.
But first of all i will check the thread you recommended.
Thanks for your help!

Similar Messages

U261B An Issue due to 3 Decimal Places in Percentage - Help Required

I've an Issue in BEX report output, which is like when I try to create a 'Percentage' computation on a Key Figure Value, I'm getting 3 decimal places as 'default' output.
The 'Calculations' settings I made for this KF is
> Calculate Result as ... Nothing Defined
> Calculate Single Values as .... Normalize According to Next Group Level Result
> [✔] Apply to results
> Calculation Direction - Along Rows
☹ I ran SAP_RSADMIN_MAINTAIN and set object 'IGNORE_T006_ANDEC' to the value 'X' - Not woking! Should I choose Update/Insert/Delete??
☹ T006-ANDEC & T006-DECAN for '%' has 0 decimal places only. Am I checking the correct stuff?
☹ OSS note 866505 not helpful for my issue. BW 7.0 Stack
I'm getting my output as expected, but the only worrying factor is 3 decimal places due to the 'Calculations'. I'm unable to resolve using existing methods. Should I raise an OSS Note for this?
Please help...

Hi, I posted a message to SAP on this topic and got an explanation - it is a behaviour that cannot be changed in certain cases:
it is the known design that it is always displayed with three decimal
places for normalized values and the setting in Query Designer for
decimal place doesn't take effect. This is because that normalization
changes the number dimension of this structure element.
You may refer to below notes about more details.
> 869135 Decimal places and scaling for "Calculate Single Values As"
You cannot set the number of decimal places or the scaling for some
columns or structural components.
For 2: Some "Calculate As" functions change the number dimension of a
KID. In this case, the scaling and the number of decimal places set for
the KID are no longer relevant. In this case, the system ignores the
original setting and selects a setting that corresponds to the new
number dimension. This cannot be overwritten. The following functions
are affected:
Calculate Single Values as Scale to Result, Overall Result or Query
Result: Scaling 1 and three decimal places.
> 501930 Number of decimal places setting is not applied
As a result, normalized values resulting from the list calculation are
displayed with three decimal places and without scaling by default.
best regards, thom

Issue with display of decimal places

Hi,
In our custom built components we are facing a strange issue with the display decimals where the data type of an element is "QUAN - Quantity field, points to a unit field with format UNIT".
If the element has a value of 3000.000 KG the value is displayed as 3000. Where as for an element which has a value 3000.123 KG the same is displayed as it is with the decimals. We tried to resolve the issue by using Text editor or Input field as read only but in vain. The display property in the context are set to default.
If we change the element data type reference to "Dec - Counter or amount field with Comma and Sign" then all the values are displayed with the decimal places even if decimals are zero.
As a result we are facing alignment issues for the various quantity related elements displayed on the screen. To change the underlying data type of the element is a not a solution for us as the data type quan is required for conversion from one unit to another unit.
Can someone please advise how we could resolve this issue. We are on NW 7.0 + EHP4 + NW 7.01 SP4, kernel patch level 55 for 7.01
Regards
Rohit Chowdhary

Jameel, Thanks for the answer but this is a not a solution for us. We have around 40-50 webdynpro components and with mutliple views referring to this data element / domain combination. More so the context are bound to database tables / structures .
I hope to get a reply from Thomas on possible solution for this. I am not sure if I can open an support ticket for this issue.
Rohit Chowdhary

Problems of setting values% with 2 decimal places in any graphics. What sho

Guys, I have the xcelsius 2008 and can not make it work chart with values % and 2 decimal places. Already set up everything that I know the spreadsheet and graphics.
Someone knows what can I do?
Thanks Anderson - Sao Paulo - Brazil.

Hi Anderson,
To get values in % and upto two decimal, follow the below steps:
Go to Chart properties-> Appearences Tab-> Text tab.
Select the "Vertical Axis Labels" and go to the Number format present below in the window.
Change the format to "Percentage" and set decimal places to "2".
This should work.
Please revert incase you have any queries.
Thanks,
Amit Mathur.

Decimal places in SRM-MDM Catalog 3.0

Hi experts,
Iu2019m using SRM-MDM Catalog 3.0 and Iu2019ve an issue related to the decimal places configuration.
Our products are defined with 2 decimal places and after importing the records I can see them in Data Manager with the correct price information. However, when I access my catalog in EP, I can see all my records but without any decimal places. For instance, if I define a price 1.25 Eur for one product, in EP I have 1 Eur.
Can someone help me? Itu2019s really important that we can show the product correct price.
Thanks in advance.
Best regards,
Andreia Nascimento

Hi,
My problem was in MDM Data Manager - currencies table. If you choose currencies table, select your currency and check if there are any decimal places defined.
You can also check in MDM Console price table u2013 amount u2013 decimal places.
BR,
Andreia Nascimento

Purchase Order three decimal places

Dear Experts
I want to change purchase order decimal places to three. Standard sap setting allow two decimal places.
My client want to create some raw material purchase orders in three decimal places. Also vendor bill is received in three decimals. But Purchase order doesn't allow three decimals, and if the same purchase order is created with two decimal places it causes huge amount difference. By this reason many purchase orders are pending. In transaction Code OY04 we can change the decimal places for currency directly. If there is any other setting to allow three decimals for mm transactions only. We have one month real time data on our production system, is it correct to change the decimal places at this stage.

OY04 it is a oneway decision, extending yes, but removing not anymore possible then. Search OSS for more infos.
If you allow more decimals, then this has not only effect on purchase orders, it will certainly effect your FI books as well.
SAP predefines the currencies in its natural design.
If a currency like dollars has smaller units like cent, then the SAP currency will show that. eg. for USD 2 decimals.
If you need more detailed prices with more than 2 decimals, then you should use the price unit which is usually next to the price fields.
instead of 1,0025 dollar you just enter 100,25 dollar per 100, this has the same effect. and this is available in material master and any condition, hence in PO and SA.

Decimal places in charts

Hi
I have this SQL code for a pie chart and it rounds items down to 0% instead of showing decimal places. Is is possible to change it to show 0.5% for example?
select null link, PRODUCT label, 100*ratio_to_report(COUNT(ID)) over () value
from CHART_BY_PRODUCT
WHERE REGION = NVL(REPLACE(:P17_REGION, '%null'||'%', NULL), REGION)
AND LOB = NVL(REPLACE(:P17_LOB, '%null'||'%', NULL), LOB)
AND TRUNC(TO_DATE(DATECALLED)) BETWEEN TRUNC(TO_DATE(:P17_FROM_DATE))
AND TRUNC(TO_DATE(:P17_TO_DATE))
group by PRODUCT
order by count(id) descRegards
Adam

Basically this function - 100*ratio_to_report(COUNT(ID)) over () - is showing values in percentage. i.e. 40%, 20%, 5%, 1%, 0%.
I want it to show the percentage with decimal places i.e 40.52%, 20.3%, 5.2%, 1.25%, 0.25%
Can I change the function somehow to show two decimal places?
Thanks
Adam

Some urgent help needed with MobileMe suddenly saying my password is wrong

Hi
First of all I want to say sorry if this is in the wrong forum, but I needed some urgent help and I couldn't find a forum other than this that might relate to this issue.
The issue that I am having is with my MobileMe Account. I was on my Mac, when when my MobileMe Account suddenly dropped its connection and told me that I had entered the wrong username or password (I know I hadn't) I tried to re-enter them but every time I try I just get a message that says I have entered the wrong username or password. I no longer have access to my Mail, I can not sing-in to MobileMe to access my online account and it wont let me change the password because it keeps saying that safari can not open the page.
I can not sign-in to my MobileMe folders on my Mac and it wont sync. I was signed in perfectly fine before this happened so I know its nothing to-do with my password or user name.
I am now locked out of MobileMe and need some help as to what might have went wrong
Can someone please give me some quick help as this is really worrying me as I am afraid my MobileMe account might of been hacked (that is the kind of behaviour that I am seeing - saying that my username and password are wrong, when they are not, and not letting me sign in to change them)
Huge thanks

Ughhh,
it seems my panic was for nothing. I just ran apple 24 hour support and they put it right for me it cost me but I'd rather be safe and pay then loose all the information I have on MobileMe. This has taught me a lesson anyway, I need to keep a backup of everything and not just rely on time machine

Pie chart problem with label!

Hello,
I found this example of pie chart, I tried to use several pie charts but the label square move in some chart. It shows the square moved down when it uses the vi.
I attached the example with 4 pie charts and sometimes it show the 4 sqaures and sometimes down one. Any way to fit it?.
I would like to see some example with 3d pie chart. Do you know any example?.
Thanks in advance!.
Fred
Solved!
Go to Solution.
Attachments:
Pie Charts.vi ‏25 KB
PieCreateChart.vi ‏13 KB

Sorry guys!. i got it.
Changing the first time call to comparison of For Loop = 0, so always start with the value fixed to draw the square.
Thanks.

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Formatting decimal places in scatter charts???

I set up rather simple X-Y chart with numbers that have about 5 significant decimal places. All 5 numbers show up in the X chart axis labels. I can't find any way to tell Numbers to use only two decimal places in the chart labels. Does anyone know how to do this? I tried changed the displayed decimal places in the original cells but it doens't effect the charts.
TIA

Thanks Brad for you quick response.
It kind of worked... I think I might have something else going on. Not sure what though.
With the changes made in the script you suggested, the X-Axis has changed to two digits but now it displays " 1.dd "
Any thoughts where else I might have gone wrong?
Thanks again
SJD
Attachments:
2013-03-13_151027.JPG ‏12 KB

Missing "Charts, Images, Text Labels" demo from iWorks Numbers page.

Really just an issue with the number iWorks page on the website.
At the address below, Apple has a few watchable demos:
http://www.apple.com/iwork/numbers/
Intelligent Tables.
Flexible Canvas.
Charts, Images, Text Labels.
and
Interactive Print View.
But the hyperlink listed under "Charts, Images, Text Labels." is the same as the one under "Flexible Canvas."
Does anyone have the actual address that takes you to the "Charts, Images, Text Labels." demo?
for reference, here is the address that is duplicated:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_flexiblemediarichcanvas_20070807640x400.mov
thanks!

The link below is now available from the iworks page:
http://movies.apple.com/movies/us/apple/mac/iwork/2007/features/iworkfeatures_2dand3dcharts_20070807640x400.mov
Thanks to who ever updated it.

Okay, I have read some of the issues here

Okay, I have read some of the issues here and I am scratching my head. I have my PC hard wired to a Linksys WRT G router and my Mac is connected wirelessly to it just fine. Now, my computers don't seem to see each other on the network. Pretend I am a a complete novice and step me through telling me how to network to share the CD files, documents and pics that I have on my PC with my MAC.
I have the sharing enabled on both the MAC and the PC and I had this working at one point but something went haywire and all was lost. I have since reset my router and re-established the wireless connection between the PC and MAC.
When I click on the Finder and click on Network, my PC is no longer in there like it was before.
Any help would be appreciated.
Thank,
Dave

I'm just getting setup myself. Is your mac sensing the wireless network? And if so can you surf and check your email on the mac wirelessly?

Removing Decimal Places from Graph labels

One axis on my graph is showing decimal places despiting formatting the report field to show 0 places - the graph is reading decimal places directly from the database underneath the report . Other than editing each axis label manual (or editing the original database field) does anyone know of another way I can elimate the decimal places from the graph?

That solution only works for the x-axis but not the y-axis (or the other way round, depending on whether the chart is horizontal or vertical).
The values of the y-Axis are formatted according to the default Number Formatting. If you can afford this, change the default number formatting to 0 decimal places.
Another workaround would be to create a formula. Let's say amount was your database field. Then the formula would be
ToText({AMOUNT},0)
Put that in your chart instead of the original database field.
Cheers,
Florian

Lost Decimal Places when extracting value from ODS into Cube

Hi,
In short, we wish to transfer data from an ODS to a custom cube. One of the Key Figures is becoming an integer in the process.
Both the ODS and Cube use the same InfoObject which is defined as a Number with a Data Type of FLTP.
If I set a break-point in the update rules, I can see that it is reading the value into the communication structure correctly. Yet, when I browse the data in the Cube, it seems to have lost the decimal places in the update.
More details:
We have a custom ODS and cube which needs to store a Unit Price to four decimal places. In creating the InfoObject for Unit Price, we could not use a Data Type of Currency (Type = Amount) as this is limited to 2 decimal places.
Instead, I used a Data Type of FLTP (Floating Point) and a type of Number. All decimal places are loading correctly into the ODS, but are being lost when transferred to Cube.
Many thanks
Adrian

Hi Simon and Emmanuel,
Thanks for the suggestions.
Unfortunately the Query is returning the same integers as LISTCUBE.
Also, my key figure has the same definition in both the ODS and cube (uses the same InfoObject), and there is no transformation - just transfer.
I'd prefer not to create another currency. It could get a bit messy if I'm having to include the figure in calculation with other figures that use the real currency.
I had thought of making the key figure a standard type of Currency and multiplying the value by 100 before storing them in the cube - then I would simply divide the figures by 100 in the query. But again, not ideal.
I have logged a OSS note with SAP to see if there is any known issue with transferring a floating point number between the ODS and Cube.
Thanks
Adrian

Some urgent chart issues : Lost labels & erroneous decimal places

Similar Messages

Maybe you are looking for