Some USB 2.0 Hard Disk Drives Work, Some Don't
External drives that work for me with AEBSn:
New LaCie 500GB USB 2
New LaCie 250GB USB 2
Older Western Digital 80GB USB 2
Drive that doesn't work:
AcomData 320GB USB 2/FireWire combo
The 250GB LaCie drives are currently on sale at CompUSA for $99.99 US.
Careful. My brand new, USB2 250GB LaCie d2 drive does not work well at all on my draft-n airport network. It's fine as an AirDisk... until I want to download something from iTunes. Music's okay, but if it's a TV or a movie, the download will begin... and after a few minutes, it will grind to a hault, iTunes will NOT quit (or force quit for that matter), and the next time I hard restart or join my network, I can no longer mount my LaCie drive. This is reproduceable EVERY TIME.
LaCie tells me to talk to Apple (and I'm inclined to agree), and Apple says they don't officially support this feature (used in this way). Pretty pathetic of Apple and I'm very unhappy with this product.
Similar Messages
-
I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply. -
Arch: Install to & run from External USB Hard Disk Drive (HDD)
I wanted to play with ArchLinux 2009.02, but replacing the existing Debian-Lenny on the laptop's HDD wasn't an option. So I experimented with installing Arch on an external USB Hard Disk Drive.
I have tried to make this "newbie-friendly", so I hope the more experienced will forgive the detail.
Materials:
Three year old Dell Inspiron 6000
CPU = 2.0 GHz Pentium
RAM = 2.0 GB
Internal HDD = 80 GB
Internal CD/DVD R/RW
External USB HDD = Freecom FHD-2 Pro 80 GB
Archlinux 2009.02 install CD
Steps to install:
1. I put the Archlinux install CD in the drive and connected the external 80 GB HDD in the USB port.
2. When the Dell laptop was booted, I pressed F2 to enter the BIOS setup. I edited the boot sequence to the following:
Internal CD/DVD
External USB device
Internal HDD
On the Dell, you can also press F12 to select the preferred boot device for that boot.
3. I started the laptop and the Archlinux installation menu came up and I proceeded with installation following the "Official Arch Linux Install Guide" and the "Beginners Guide".
4. Used km to change to UK keyboard layout and then began the installer script (/arch/setup). I was installing from the core CD so I skipped the network steps.
5. HDD preparation.
This was fairly straightforward with two cautions:
(a) Make very sure that the external HDD (sdb) is selected for the operations.
(b) Remember to set the Bootable Flag for the first (/) partition on the HDD.
I chose 20 GB for /, 2 GB for swap and the remainder for /home.
6. The package selection and installation was fairly straightforward.
7. Configuration of System
This was section was straightforward with one warning:
USB had to be added to the HOOKS in the /etc/mkinitcpio.conf file!
I found this to be essential for my external USB HDD to function as a bootable device. Otherwise I got the same sorts of errors relating to unrecognisable file system types that other people have reported in the forum.
The relevant line from the end of the edited /etc/mkinitcpio.conf file is below:
HOOKS="base udev autodetect pata scsi sata usb filesystems"
8. Installation of GRUB was the other point where caution and/or correction was necessary.
When it asked where GRUB should be installed, I had to select sdb (my external USB HDD) and not any of the particular partitions on sdb. If the root partition sdb1 was selected then the laptop won't boot from the external USB HDD.
The GRUB /boot/grub/menu.lst as written by the installation routine specifies hd(1,0) which doesn't work when you try to reboot from the external USB HDD. When you boot Arch from the external USB HDD, as far as Arch is concerned - at that point in time - the external USB HDD is the first drive in the system. To fix this:
(a) When the Arch boot menu comes up, press e to edit the grub entries.
(b) Change the first line to hd(0,0)
(c) To the end of the kernel line add rootdelay=8
(d) Press b to boot the system with these temporary corrections.
(e) Once your Arch system has booted, edit the /boot/grub/menu.lst to make the above changes permanent.
The relevant portion of my /boot/grub/menu.lst looks like the following:
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/... ro rootdelay=8
initrd /boot/kernel26-fallback.img
9. The laptop happily and consistently boots Arch Linux from the external USB HDD when it's plugged in before startup/booting.
Running Arch from the external USB HDD seems as quick as running Debian from the internal HDD.
So if there is a performance penalty associated with using an external USB HDD, my wife and I haven't noticed.
In summary, the three essential points to address during installation to an external USB HDD are:
Remember to set the bootable flag for the first partition.
Add USB to the HOOKS for /etc/mkinitcpio.conf file.
Correct the /etc/grub/menu.lst file.
I hope this is helpful.
TedHi Rookie,
As you say, it is worth remembering the rootfstype= option for the kernel line just in case someone still has problems with GRUB after making all the other changes.
I was working with the most recent Arch 2009.2 release.
I only got messages about unrecognisable file system type when I tried booting with the "stock" or "as-installed" GRUB (before I edited /boot/grub/menu.lst). After editing /boot/grub/menu.lst to identify the drive correctly and add rootdelay, GRUB was able to do the rest and everything worked OK without any error messages.
Best wishes,
Ted -
Will the1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1?
Will the 1TB SATA Hard Disk Drive Kit for Mac Pro now in the Mac Store work with my Mac Pro1,1? My details of my Mac Pro is as follows:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 6 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Hardware UUID: 00000000-0000-1000-8000-0017F2059956It will say "green" and use less power, park its head probably, and while early units had some trouble they have evolved. Variable rpm or slower rpm also. They can be much less expenisve way to add storage.
WD Caviar Green
WD Green 2TB
For the system, 640GB is a nice size. Look for 64MB cache to help insure your drive is the latest models which will also say "6G SATA 3" which is fine.
WD Caviar Black 1TB 6Gb
WD Black Caviar 2TB
larger means higher density platter, I find the 1TB and larger Blacks to run hotter/warmer and companys want drives to be able to run warmer or with less cooling. - but for really cold drives other than SSD I have found all my WD 10K VRs to have the absolute coldest temps.
Just noticed Amazon having better prices than Newegg on 1TB - and WD and Hitachi.
Green for your external backup, for media libraries that are not high volume access, to run cool and less power. Enterprise for system and performance. TimeMachine sometimes makes a poor backup method with some green cases. -
G3 missing internal hard drives using OS 10.3.9, Disk drives work with OS 9
G3 missing internal hard drives using OS 10.3.9, Disk drives work with OS 9. I installed OS X over a year ago, and could never get it to recognize 2 previous internal disk drives. When I run OS 9 it works fine.
rob:
I think I'm beginning to get the picture. "Missing drives" refers to the two that do not show up on the DT when you boot in OS X. Now, some more questions for clarification.
1. Is each of the drives formatted Mac OS Extended or HFS+?
2. What do you have on each individual drive?
3. What OS is installed on the Master drive?
4. Are OS 9 and OS X installed on separate drives?
5. If they are, is there a particular reason you want it so?
6. Can you use the Startup Manager to select the startup disk?
7. Which is the default startup disk?
Lots of questions, I know, but it will help me to get a picture of the set up. I think I have an idea of what is going on, but I can't be sure until I know more.
Good luck.
cornelius -
Access external USB hard disk drive with REISERFS Linux filesystem.
I recently bought second-hand an older MBP Pro (2006 model) with Tiger installed, which I use as a desktop system at home and I would like to be able to connect an external IOMEGA 500 GB hard disk drive to it and have read/write access to its contents (mostly video / picture / music files). I spent a while searching on the Internet for solutions - nothing usefule came up. Does anyone in here have any ideas on how to do this? Is it possible at all after all?
P.S.: Apart from this older MBP Pro, I also have a newer model (bought in early 2008) with Leopard installed - I wouldn't mind finding some solution on my problem on that OS instead...Hi,
The two ways I can see to possibly do it are to network the Linux machine & Drive, then use Samba to access it.
By using the Mac OS X Virtual File System (VFS) capability and writing kernel extensions, you can add support for other file systems. Examples of file systems that are not currently supported in Mac OS X but that you may wish to add to the system include the Andrew file system (AFS) and the Reiser file system (ReiserFS). If you want to support a new volume format or networking protocol, you’ll need to write a file-system kernel extension.
http://developer.apple.com/documentation/Darwin/Conceptual/KernelProgramming/Fil esystem/chapter12_section1.html -
I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?
Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply! -
IMovie, working on other hard disk drive
Is there any way to work on iMovie 09 on external hard disk?
I am now trying to work on my new movie project, and my most of movies I want to use are in my other hard disk. Those movies are too huge to move in my computer.
Or is there anyway to set the iMovie events folder in other hard disk drive?
Thanks.Welcome to Discussions, daylight7986
Click the Hard Disk button in iMovie's Event Library to see other drives.
iMovie help can give you more info. Searching your Mac's iMovie > Help for "disk" (without the quotation marks) will give you several topics including these linked here from Apple's web help:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/19548.html
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/19555.html
(The help topics will be quicker to use from your Mac's iMovie help.)
They will explain how to change disks or move a project there after it has been created.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight
Message was edited by: EZ Jim -
Does Hard Disk Drive Camcorder using MPEG2-PS format work with iMovie6?
Considering purchasing a Sony DSR - SR 82 Camcorder with a Hard Disk Drive using MPEG2-PS format. I read in the Missing Manual that MPEG-2 generally does not work with iMovie.
Hello Luv2Curl,
I read in the Missing Manual that MPEG-2 generally does not work with iMovie.
That is correct. MPEG-2 video needs to go through a lengthy and lossy conversion process in order to be imported and edited in iMovie. You'll be better off getting a MiniDV camcorder - it works natively with iMovie and the video quality is better as well.
hope this helps
mish -
I have a Hard Disk 1 (301) error message, when turning on my laptop. It says something along the lines of "the hard disk has detected an imminent failure".
My laptop is a HP Pavilion G7-1033cl (windows 7), purchased in 2011, so it's out of warranty.
As far as a noticed in some other answers, I shoul replace the hard-disk for sure.
Ok, my question is: What kind of hard disk shoul I buy for replacing it? What's the best recommended?
Thank you for your help!
GStoicuWhenever the Hard Disk fails with an error Hard Disk 1 [301] that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue
This issue could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
Please try the below shown troubleshooting steps once:
Step 01. Remove the battery and unplug the AC/Power Adapter
Step 02. Press and hold the Power button for more than 30 Seconds
Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
Step 04. Press the Power button and check if the Unit works normal
If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further support
http://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop
Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP -
Connecting external hard disk drive
I was just wondering if we buy an external hard disk drive, will it work on the Mac ? Or must we also buy an external hard disk drive manufactured specially by Apple ?
Can Mac read and write from/to this external HDD ?
ThanksApple has not manufactured external hard drives in at least 8 years.
Most external hard drives will work with Macs. Many though are preformated to only work with Mac OS X. Since according to your profile 10.5.4 is on your machine, you should be fine on that account. Some are preformated for NTFS, or FAT32 and you need to use Disk Utility in your Applications -> Utilities folder to format it to be usable as a clone backup, or as a backup for Time Machine. If you want to share the hard drive between Mac and Windows machines, see this user tip:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4582486
Note, since you posted to the iMac Flat Panel forum, I can only surmise you have a PowerPC Mac with a white dome and a screen on a rotating chrome arm. If not, you posted to the wrong forum. Here's how to identify your Mac:
http://support.apple.com/kb/HT1463?viewlocale=en_US
If you have a PowerPC Mac, you must get a Firewire hard drive in order for your external hard drive to be bootable as a clone backup.
Intel Macs supports both USB and Firewire for external booting. -
Comparison of SSD with hard disk drives
Attribute or characteristic
Solid-state drive
Hard disk drive
Spin-up time
Instantaneous.
May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
Random access time[45]
About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
Read latency time[46]
Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
Generally high since the mechanical components require additional time to get aligned
Consistent read performance[48]
Read performance does not change based on where data is stored on an SSD
If data is written in a fragmented way, reading back the data will have varying response times
Defragmentation
SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
Acoustic levels
SSDs have no moving parts and make no sound
HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
Mechanical reliability
A lack of moving parts virtually eliminates mechanical breakdowns
HDDs have many moving parts that are all subject to failure over time
Susceptibility toenvironmental factors[47][52][53]
No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
Magneticsusceptibility[citation needed]
No impact on flash memory
Magnets or magnetic surges can alter data on the media
Weight and size[52]
The weight of flash memory and the circuit board material are very light compared to HDDs
Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
Parallel operation[citation needed]
Some flash controllers can have multiple flash chips reading and writing different data simultaneously
HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
Write longevity
Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
Magnetic media do not have a limited number of writes.
Software encryption limitations
NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
HDDs can overwrite data directly on the drive in any particular sector.
Cost
As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
Storage capacity
As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
As of October 2010, HDDs are typically 2-3TB or less
Read/write performance symmetry
Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
HDDs generally have symmetrical read and write speeds
Free block availability andTRIM
SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
Power consumption
High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.I wish I could get my head round the SSD vs HDD with a NLE rig. My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS. That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.
The rest of the new build is
3930K
Gigabyte X79-UD5
8 x DDR3 1600
Coolermaster with 750W PSU
Geforce GTX570
I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use. That means
Either the above SSD or 450Gb 10k Raptor for OS (new drives)
300Gb 10k rpm Raptor (currently used for OS in old box)
150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
2 x 1Tb WD Blacks (data drives)
2 x 1Tb WD USB3 externals
I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice. It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over! And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor? I have read a comment that the WD Blacks don't work well as Raid0. Is that BS or true?
I am about to give the go-ahead so need to confirm the spec. -
Can I upgrade MacBook Pro hard disk drive next year?
Hi there! I'm new to the Apple Support Communities!
I am going to buy a new 13" MacBook Pro, 2.5GHz. I am going to buy the base model, with a 500GB 5400 RPM hard disk drive. Right now, I can't afford a 256GB solid-state drive, but I'll have enough for one by later next year. So, I will have done some stuff on my Mac by the time I can upgrade it. I know how to install the drive itself, but how do I transfer my information?
Here are the issues:
1) I don't know how I would make it so I could boot from an external USB.
2) And I don't know how to get all my personal information from one drive to the other.
For "2", I think I could back up my Mac to a hard drive with Time Machine, and then restore from a backup. But Time Machine couldn't back up the whole OS, right? And what would the procedure be anyway? Just turn it on when I'm done the upgrade?
If someone who has done this before could provide step-by-step instructions, I would really appreciate it!
Thanks,
Solid-State Me Yes you can replace the hard drive at any time. Purchase a replacement drive from any store you like - newegg or mcetech are good stores (among many others) - and when you purchase the new drive, also purchase a drive enclosure. Then download a program called "super duper" and follow the instructions to use that software. When your drive arrives, put the new drive in the enclosure, plug it in to your computer and run "super duper" with the option to "make the drive bootable" and let it finish. What it's doing is copying your drive onto the new drive. Once the copy is finished, you can shut down your computer, remove the drive, install the new one, and put the original drive into the enclosure. Now you have an external hard drive that is repurposed instead of throwing it away. Keep that drive intact for a few weeks without erasing or adding data to be sure you are happy with the new drive and how it performs. After that, use the drive to store files, backup the internal, transfer stuff, whatever.
-
Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
I just used it a week ago, before I did the update and it worked perfectly fine.
Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
Thank you!!!Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
The fixed value date is empty and not displayed in the VA05 report
Hi SD Gurus, With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered. But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it
-
Dear all, Newly I installed dialog instance to my CI server, Now I can configure load balance to my CI server. Please send configuration doc for MSLG and what Settings I need to perform in SAPGUI Regards, satish
-
Issue with Print Properties button not responding in Adobe Reader 10.1.10
We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding. When this happens Adobe Reader will crash if you click on the Print button. If you go into D
-
How do i add a Facebook follow me link to my site using iWeb?
Good afternoon! I've seen the Facebook Badge but im not sure if that's what i want. i just want the blue box with the "F" and then "Follow name" next to it. Thank you!
-
I am running Adobe After Effects CC 2014.0.2 on a Windows 7 Ultimate Machine. When the user begins to render an uncompressed file she receives the following error message: I have been searching all day for solutions to this error with no luck so far.