Some videos I've recorded crash the system upon opening them.

Then it automatically reboots. I have plenty of space on the media card (if that could be an issue). Any idea what's going on?
Thanks,
Dan
8330 Curve

bump

Similar Messages

Why does firefox 7 crashes the system if Quadro NVS 135M graphics driver is installed?

Why does firefox 7 crashes the system with a Quadro NVS 135M graphics cards installed?
It happens immediately after opening Firefox on a two screen system. You get a message saying the Graphics Driver stopped responding, but that it managed to recover, but after a while the system freezes completely. You can't even CTRL+ALT+DEL.

I get this too on with my nVidia GTX460 card. In my case the screen goes black. It happens once every few days, and for a while I could not figure out why. I was forcing a shutdown to get the screen back.
But I put the computer to sleep and woke it up, since that restarts the video, and this let me see what was wrong. The only error message is it reports that Firefox hung. There is nothing else in the Event logs.
I'm running Windows 7 with all the updates from Windows Update, and my video driver is 285.62, but his also happened with the 260.26 driver.
I imagine this is happening a lot, but people aren't able to isolate the cause.
I'm looking for a fix, not a bypass.

I've just brought some video from itune, but realised the I should have brought the SD version instead of HD version as my iPad didn't have enough storage. Can I change that from HD to SD?

I've just brought some video from itune, but realised the I should have brought the SD version instead of HD version as my iPad didn't have enough storage. Can I change that from HD to SD?
Does it mean that I can't watch it if I cannot download it?

this helps. check it out! http://support.apple.com/kb/ht3209

System is not recorded in the system list

Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.S

Hi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny

Primusrun crashes the system on exit

Hi there im using bumblebee on my laptop for the optimus support.
When i run any graphical application through bumblcee it crashes the whole system when i exit it.
for example:
$primusrun glxgears
It works and diplays it, but when i press ESC to exit, it freezes, crashes the system.
These are the logs from the crash.
Thnx for the help
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744022] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: P
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744013] [ERROR][XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.744001] [WARN][XORG] (WW) Warning, couldn't open module mouse
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743990] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743978] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743968] [ERROR][XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743962] [WARN][XORG] (WW) Warning, couldn't open module mouse
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743954] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or d
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743949] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: P
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743943] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 4783 does not b
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743925] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/7
ago 24 01:17:59 Archpire bumblebeed[228]: [ 794.743897] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/1
ago 24 01:17:58 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [P
ago 24 01:17:54 Archpire kernel: nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
ago 24 01:17:54 Archpire kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.32 Tue Aug 5 20:58:26 PDT 2014
ago 24 01:17:54 Archpire kernel: [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
ago 24 01:17:54 Archpire slim[257]: xf86: found device 1
ago 24 01:17:54 Archpire slim[257]: removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
ago 24 01:17:54 Archpire kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
ago 24 01:17:53 Archpire kernel: bbswitch: enabling discrete graphics

Hi!! take a look and see if you have this version of packets:
intel-dri-10.2.6-1-x86_64.pkg.tar.xz
lib32-intel-dri-10.2.6-1-x86_64.pkg.tar.xz
lib32-mesa-10.2.6-1-x86_64.pkg.tar.xz
lib32-mesa-libgl-10.2.6-1-x86_64.pkg.tar.xz
mesa-10.2.6-1-x86_64.pkg.tar.xz
mesa-libgl-10.2.6-1-x86_64.pkg.tar.xz
I had the same issue since they were updated.
Now I have downloaded to version 10.2.5-1 and solved the problem.
Let me know
Sorry about my english...

HT1296 i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.

i cannot transfer some videos to my iphone 3gs. the file is in MPEG4 format. i can view in itunes but cannot be transfered to iphone. Please help me with this problem.

In iTunes, Advanced>Create iPod or iPhone version

Mkfs.ntfs crashes the system

Hi all,
Here I am again with a weird kernel & swap bugs! But I'm pretty sure the kernel itself is okay, so newbie corner it is.
Here the problem: Doing this (/dev/sdb is a 16 GB USB key I want to format)
% sudo mkfs.ntfs /dev/sdb1
Cluster size has been automatically set to 4096 bytes.
Initializing device with zeroes: 2%^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C^C
Crashes my system in 30 seconds. As soon as I type the command, the computer gets extremely laggy, cursor barely reacts to mouse movement, can't ^C the command, few seconds later X is completely locked up and I switch to another terminal. Shortly after logging in, I lost acces to the terminal as well (too laggy), so I just unplugged the USB key, very bad idea from me:
[142571.154220] quiet_error: 29182 callbacks suppressed
[142571.154225] Buffer I/O error on device sdb1, logical block 2908602
[142571.154290] lost page write due to I/O error on sdb1
[142571.154297] Buffer I/O error on device sdb1, logical block 2908603
[142571.154358] lost page write due to I/O error on sdb1
[142571.154369] Buffer I/O error on device sdb1, logical block 2908604
[142571.154431] lost page write due to I/O error on sdb1
[142571.154435] Buffer I/O error on device sdb1, logical block 2908479
[142571.154497] lost page write due to I/O error on sdb1
[142571.154501] Buffer I/O error on device sdb1, logical block 2908753
[142571.154562] lost page write due to I/O error on sdb1
[142571.154567] Buffer I/O error on device sdb1, logical block 2801907
[142571.154629] lost page write due to I/O error on sdb1
[142571.154633] Buffer I/O error on device sdb1, logical block 2908635
[142571.154695] lost page write due to I/O error on sdb1
[142571.154700] Buffer I/O error on device sdb1, logical block 2908198
[142571.154761] lost page write due to I/O error on sdb1
[142571.154766] Buffer I/O error on device sdb1, logical block 2908199
[142571.154827] lost page write due to I/O error on sdb1
[142571.154831] Buffer I/O error on device sdb1, logical block 3199990
[142571.154893] lost page write due to I/O error on sdb1
[142576.287833] quiet_error: 47191 callbacks suppressed
I had to SysRq+RE to recover from this one. Then I tried it again, but I was able to recover the system this time, and I got this:
[145804.543734] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[146114.823092] INFO: task kswapd0:58 blocked for more than 120 seconds.
[146114.823169] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[146114.823246] kswapd0 D 0000000000000022 0 58 2 0x00000008
[146114.823395] ffff8801192ef838 0000000000000046 ffffffffa0148039 ffff8801192effd8
[146114.823637] ffff8801192effd8 ffff8801192effd8 ffff8801192effd8 ffff880119495040
[146114.823878] ffff880119063580 ffff88011763f710 ffff88011763f710 0000000000000004
[146114.824198] Call Trace:
[146114.824277] [<ffffffffa0148039>] ? scsi_request_fn+0xa9/0x4a0 [scsi_mod]
[146114.824343] [<ffffffff812285a3>] ? __blk_run_queue+0x33/0x40
[146114.824406] [<ffffffff8122c47b>] ? queue_unplugged+0x3b/0xe0
[146114.824473] [<ffffffff814b16af>] io_schedule+0x8f/0xe0
[146114.824535] [<ffffffff8122d96a>] get_request+0x1aa/0x770
[146114.824598] [<ffffffff81232b1e>] ? ioc_lookup_icq+0x4e/0x80
[146114.824663] [<ffffffff8107ab80>] ? wake_up_bit+0x30/0x30
[146114.824726] [<ffffffff8122fcc9>] blk_queue_bio+0x79/0x3e0
[146114.824788] [<ffffffff8122ebf2>] generic_make_request+0xc2/0x110
[146114.824851] [<ffffffff8122ecb3>] submit_bio+0x73/0x160
[146114.824916] [<ffffffff811a346c>] ? bio_alloc_bioset+0x3c/0x130
[146114.824979] [<ffffffff8119fea4>] submit_bh+0x114/0x200
[146114.825041] [<ffffffff811a19d0>] __block_write_full_page+0x160/0x380
[146114.825108] [<ffffffff811a45d0>] ? I_BDEV+0x10/0x10
[146114.825172] [<ffffffff8119e6d0>] ? end_buffer_write_sync+0xb0/0xb0
[146114.825235] [<ffffffff811a45d0>] ? I_BDEV+0x10/0x10
[146114.825297] [<ffffffff8119e6d0>] ? end_buffer_write_sync+0xb0/0xb0
[146114.825360] [<ffffffff811a1de8>] block_write_full_page_endio+0xd8/0x110
[146114.825424] [<ffffffff811a1e35>] block_write_full_page+0x15/0x20
[146114.825487] [<ffffffff811a4de8>] blkdev_writepage+0x18/0x20
[146114.825550] [<ffffffff8111f1d0>] shrink_page_list+0x710/0x930
[146114.825614] [<ffffffff8111f950>] shrink_inactive_list+0x150/0x450
[146114.825677] [<ffffffff811201f1>] shrink_lruvec+0x201/0x4b0
[146114.825743] [<ffffffff8116f586>] ? put_super+0x36/0x40
[146114.825806] [<ffffffff8112050e>] shrink_zone+0x6e/0x190
[146114.825868] [<ffffffff8112154c>] balance_pgdat+0x43c/0x5a0
[146114.825933] [<ffffffff81121801>] kswapd+0x151/0x460
[146114.825994] [<ffffffff8107ab80>] ? wake_up_bit+0x30/0x30
[146114.826056] [<ffffffff811216b0>] ? balance_pgdat+0x5a0/0x5a0
[146114.826121] [<ffffffff81079db0>] kthread+0xc0/0xd0
[146114.826191] [<ffffffff81305270>] ? tty_ioctl+0x960/0xba0
[146114.826253] [<ffffffff81079cf0>] ? kthread_create_on_node+0x120/0x120
[146114.826317] [<ffffffff814b9fec>] ret_from_fork+0x7c/0xb0
[146114.826378] [<ffffffff81079cf0>] ? kthread_create_on_node+0x120/0x120
I disabled swap and now I'm able to mkfs,ntfs, but it takes the whole available RAM (-/+ buffers is 1963MB). I'm typing this and this is the only tab I can open, if I dare try to open anything else system goes unstable (random app freezes like xfce4-panel, comes back if I close something else).
TL;DR: Question: Why does mkfs.ntfs crashes the system? How can I prevent it from doing that?

I don't know if this helps, here's more dmesg:
[ 1762.195956] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1762.322495] Initializing USB Mass Storage driver...
[ 1762.322576] scsi8 : usb-storage 2-1:1.0
[ 1762.322639] usbcore: registered new interface driver usb-storage
[ 1762.322641] USB Mass Storage support registered.
[ 1767.706240] scsi 8:0:0:0: Direct-Access Lexar JD FireFly 1100 PQ: 0 ANSI: 0 CCS
[ 1767.707894] sd 8:0:0:0: [sdc] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1767.708770] sd 8:0:0:0: [sdc] Write Protect is off
[ 1767.708774] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 1767.709662] sd 8:0:0:0: [sdc] No Caching mode page present
[ 1767.709667] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1767.713411] sd 8:0:0:0: [sdc] No Caching mode page present
[ 1767.713414] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1767.714417] sdc: sdc1
[ 1767.718813] sd 8:0:0:0: [sdc] No Caching mode page present
[ 1767.718817] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1767.718819] sd 8:0:0:0: [sdc] Attached SCSI removable disk
It does seem to use usb-storage as expected. I will try to find my other drive I lost somewhere on my desk and see if it does the same, I don't remember having my other drive going crazy like that.
It also seems like dd works fine on it (probably flushes the buffer on every write), I'll keep testing on my side...

Downloaded kindle app on ipad. Bought a photography book that included some video clips - I can view the video footage but have no audio!!

DDownloaded kindle app on my ipad, then bought a photography book which included some video clips - i can watch the video clips but have no audio!!

You need to find out what type of video it is. What your describing is what you get when a Video codec (software that allows you to "see" the video) is missing, damaged, or too old for the movie.
Once you identify what kind of movie it is, then you can update the codec.

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Hi I was try to open some video on my Facebook but it could not open so what can I do...???, Hi I was try to open some video on my Facebook but it could not open so what can I do...???

Hi I was try to open some video on my Facebook but it could not open so what can I do????

Try using the Facebook app.

Won't Install in Win XP "The system cannot open the device or file specifie

When installing Quichktime or iTunes, the installer displays ""The system cannot open the device or file specified."
What should I do?

I was getting this problem too. To resolve I did the following.
Physically disconnected PC from network.
Stopped Anti Virus (Evira personal).
Turned off Windows Firewall.
Stopped Malware detection (PrevX).
Installed iTunes + Quicktime.
Restarted above security programs.
Reconnected to network.
Problem sorted.

The system cannot open the device or file specified

I am trying to install jsdk.142 but i get an error message that says "The system cannot open the device or file specified" Any suggestions on how to get past this?

I figured it out myself. The temp folder that the program was using was encrypted. I removed the encryption and it installed fine.

I created documents in Word and when I email them the recipient cannot open them. Can you tell me why?

OK, I'm new at this so here goes.
I created some documents in Word and when I email them, the recipient canot open them. Does anyone know why? How do I fix that.

Make sure you have removed the tick for hide extensions in the save as panel and for best compatibilirty choose the format as Word 97-2004 (.DOC) or better still Rich text format (.RTF)
If the extension is not appended any one with a Windows PC will be unable to open the document.
Windows is dumb and without the extension doesn't know what programme is supposed to open the file !
That said they CAN add the extension themselves if they know what application created the document in the first place.
Also in the mail app click on the Edit menu at the top of the screen scroll down to attachments and in the pop out menu make sure Always send windows friendly attachments is ticked.

By accident I have some raw-files in iPhoto. I want to open them in PS camera raw. How do i do that?!

By accident I have some raw-files in iPhoto. I want to open them in PS camera raw. How do i do that?!

Export them back out: File -> Export, and set the Kind to Original
Or,
You can also process your Raw with a 3rd Party app like ACR or Photoshop. But iPhoto does not handle this gracefully and it's a bit of a kludge.
First off set your preferred app as an external editor in iPhoto:
Next: In the iPhoto Preferences -> Advanced, elect to use Raw with your External editor:
Now when you go to edit the Raw it will be sent to your external editor.
Now for the kludge:
You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you must save it to the desktop and then import it back to iPhoto as a new file.
This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open. Similary, if I scan an image and sa

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?

Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space.

Some videos I've recorded crash the system upon opening them.

Similar Messages

Maybe you are looking for