Some VLAN help
I used this documentation to setup my WLC in a lab for testing.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805e7a24.shtml
Vlan 1 = 10.5.32.1 255.255.248.0
Vlan 200 = 10.5.40.1 255.255.248.0
I have two vlans 1 and 200. I created a vlan 200 interface just like in the documentation on the WLC. The ap is plugged into a port on vlan 200 and can associate with the WLC (and grab a dhcp address) from a dhcp server which is on VLAN 10.
I have no secuirty set up on the wireless ap as im just playing around with things. I can ping the wireless interface i made on the WLC from the WLC but i cant ping it from any other device. Is that normal? Reading the documentation it sounds like i should be able to ping the wireless interface from any device on the network (i cant ping the wireless interface from the ap either)
Also i think this is cause the problem where the laptop tries to associate with the ap it cant get an ip address.
I have a 3560 running a layer 3 IOS for this lab. With the WLC on a port that allows multiple vlans do i need to setup a static route of some sort to allow communication? Or maybe im just in over my head lol
Any information you need dont hesitate to ask! Thanks!!!
I think this is the same problem im having
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1de022be
Similar Messages
-
Wifi works poorly on my brandnew ipad2. can some one help me or shall I return it to the store?
Wifi works poorly to none on my brandnew (three days old) ipad2.
The same Wifi connection works perfectly with my PC laptop.
Can some one help me or shall I return it to the store?Try here...
Apple - Support - iPad - Wi-Fi -
SOME PLEASE HELP ME I DONT KNOW WHAT TO DO.....(M-audio)
SOME PLEASE HELP ME I DONT KNOW WHAT TO DO..... SO I RECIEVED MY M-AUDIO MOBILEPRE SOUNDCARD. I CONNECTED THE USB TO MY MACBOOK (2009-2010) AND I CAN CHANGE MY COMPUTERS OUTPUT TO THE M-AUDIO MOBILEPRE... SO IT SHOWS ITS CONNECTED. NEXT I DOWNLOAD THE M-AUDIO MOBILEPRE DRIVER IT CAME WITH IN THE BOX AFTER THAT IT SHOWS ITS CONNECTED ALL GOOD....BUT WHEN I DOWNLOAD THE DRIVER "M-AUDIO MOBILE PRE USB" I PLUG IN MY SPEAKERS AND IT SAYS "UNABLE TO CONNECT TO M-AUDIO MOBILEPRE. IS IT TURNED ON?" AND ITS OBVIOUSLY TURNED ON AND CONNECTED......SO MY COMPUTER READS THE SOUNDCARD BUT IT WONT LET ME CONFIGURE THE SOUND SETTINGS IN THE "M-AUDIO MOBILEPRE USB" DRIVER ....WTH IS M-AUDIO MOBILEPRE THE SAME THING AS M-AUDIO MOBILEPRE USB???? IF SO HOW DO I CONFIGURE THE SOUND SETTINGS IN MY COMPUTER!!!
Contact M-Audio support, I suspect they will have further information that you need rather than this forum.
-
I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."
Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about. -
Hello can some please help I am trying to watch my HBO go on my apple tv I have sound no picture. I can watch my iTunes videos and youtube on my airplay with my ipad and everything is updated so I know it works. But not on HBO go, Max go, showtime go.
What you want to do does not work with an iPd running iOS 5. See the screenshot.
The latest update for HBO GO does allow for AirPlay on Apple TV - sound and video - but only on devices running iOS 6 and Apple TV running 5.1.1 or later - according to the app description. -
Report Scripts - Please Can Some One Help Me
Hello Gurus,
Is it possible to display 2 members of the same dimension in adjacent columns using Report Scripts? if not what is the best available option?
Consider this Sample Outline
+Product
+-Cofee
+---Cafined
+-------1100
+-------1200
+---Decafined
+-------1300
+-------1400
+-Soda
+---Coke
+-------1500
The format of the desired report is
======= Jan Feb Mar
1100 Cofee 8 8 8
1200 Cofee 8 8 8
1300 Cofee 7 7 7
1400 Cofee 7 7 7
1500 Soda 6 6 6
================
Please Can some one help me in this regard!
Thanks In AdvanceIf I remember correctly when I wanted to do something similar I imported the report with the level 0 members into SQL Server and then joined on a mapping table (was a parent/child table in our case) to get the other column. In our situation we already had the mapping table readily available because this is where the dimension was built from!
-
i have apps to be updated but when i try to update them a message pops out saying "You have updates for other accounts, please sigh in with the other id". Can some one help me how can i still update the same with the new apple id ive created. As i dont have the access to the earlier id anymore.
You cannot. The apps are assigned to that Apple ID and there is nothing you can do to change that. You could choose to download them again with the new Apple ID, any paid apps will need to be purchased again.
Hope that helps. -
could some one help me with something important i have a 2.8 ghz intel quad core Imac with 10.7 with bootcamp 4.0 but still getting that black screen while trying finish the install of windows 7 etc. or do i need a new mac for it to work properly
This might help point you in the right direction.
http://support.apple.com/kb/HT4818
Hope it helps
Also google it and lots of results come up including youtube clips.... -
please does anyone knows how to delete the "others" on the iphone becuase it take me a lot of spaace and i cant have anything i have 5 GB of othres coan some one help me please?
If restoring using your backup didn't work, you'll have to save as much of your data as you can (import your photos to your computer, sync your contacts and other data with iCloud, email things like Notes and Voice Memos to yourself, sync with iTunes to transfer all your purchases, etc.) and then restore it as new without using your backup.
-
I have garagaband for iOs in my iPhone 4S, I connect my Squire iOs guitarr to the iPhone, I select a Guitar Amp at the GB app then I Only can tune the guitar but I m not able to make the guitar ring with the amps. May some one help me?
You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.
-
In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks
See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem. -
I HAVE A MAC LAP TOP MAC BOOK AND WANT JUST TO REINSTALL THE SOFTWARE I DONT CARE ABOUT MY FILES I HAVE BACK UP BUT WHEN I INSERT THE DISK VERSION 10.5 WHICH COMES WITH MY COMPUTER DOESN'T WANT TO READ I HEARD THA IS TRYING BUT NOTHING,
CAN SOME BODY HELP ME...There is a possibility that the disk drive could be broken, if it just spits it back out that usually means its toast. If your MacBook has a Core 2 Duo processor, you can install Lion (via a thumb drive not disks). Here is a link to the Lion thumb drive.You can also still order them for $19.99 by calling 1-800-MY-APPLE. Also you can borrow an external disk drive and try the Leopard disks that way as well.
Good Luck! -
I have to make a catalouge for my services as a financial planner.. earlier i used to do in MS publisher.. now i have a mac book.. can some one help me with some software info with which i can design a catalogue??
Depending on what your needs are, you may use Pages included in iWork or purchase it separately (usually there is an evaluation copy with any new mac, I guess) or try other publishing apps. I once used MS Publisher, I remember it was something like a more sophisticated word processor, right?
You may try the cheaper DTP iCalamus or Word for mac. -
Some urgent help needed with MobileMe suddenly saying my password is wrong
Hi
First of all I want to say sorry if this is in the wrong forum, but I needed some urgent help and I couldn't find a forum other than this that might relate to this issue.
The issue that I am having is with my MobileMe Account. I was on my Mac, when when my MobileMe Account suddenly dropped its connection and told me that I had entered the wrong username or password (I know I hadn't) I tried to re-enter them but every time I try I just get a message that says I have entered the wrong username or password. I no longer have access to my Mail, I can not sing-in to MobileMe to access my online account and it wont let me change the password because it keeps saying that safari can not open the page.
I can not sign-in to my MobileMe folders on my Mac and it wont sync. I was signed in perfectly fine before this happened so I know its nothing to-do with my password or user name.
I am now locked out of MobileMe and need some help as to what might have went wrong
Can someone please give me some quick help as this is really worrying me as I am afraid my MobileMe account might of been hacked (that is the kind of behaviour that I am seeing - saying that my username and password are wrong, when they are not, and not letting me sign in to change them)
Huge thanksUghhh,
it seems my panic was for nothing. I just ran apple 24 hour support and they put it right for me it cost me but I'd rather be safe and pay then loose all the information I have on MobileMe. This has taught me a lesson anyway, I need to keep a backup of everything and not just rely on time machine -
Need some quick help - fairly urgent!
I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
Re: Need some quick help - fairly urgent!
created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
Hi, I own an HP Envy 4-1215dx. It's a great unit overall, but I am having problems with the audio on it. From the day I took it out of the box it will randomly spew out quick bursts of buzzing/crackling/digital noise whenever I try and play some sort
-
What are the programming language used in adobe livecycle development?
hi friends, I am a fresher.I woundered what adobe has done in livecycle import option.so i want to know wht is the programming language used and how they read graphical fields like line,circle.
-
SQL server connection error in sharepoint
We are getting below error with inetgrated security and custom DB sql server connection in sharepoint 2013. This connectionstring works in dev with SQL username and password but in QA we are changing it to integrated authority. <add name="OurConnec
-
Trying to find the highest possible MTU
Hello, I try to find out, wich is the highest possible MTU. So I send a PING -L XXXX -F to the Pix outside, from outside. XXXX is standing for the bytes. PING xxx.xxx.xxx.xxx -L 992 (and lower) -F I got a reply PING xxx.xxx.xxx.xxx -L 993 (up to1472)
-
Accessing WLS6.1sp4 from WLE5.1 with CORBA
Hello, I am looking for a good example how to implement a CORBA service on WLS61sp4 based on a given IDL. I understand that the documents e-docs say this way is error prone, but in our project we have an IDL of a legacy application running on WLE (an