Some way to change variable 'Processing By' & set it Multiple from Single

Hello,
A variable (Type-> Characteristic Var; Processing by: Authorization; Single Value; Optional) on 0Material, is being used in more than 100 queries. There is a request to replace this variable with a new variable such that Multiple Single Values is allowed with Processing by: User Entry/ Default Value.
Is there some method by which I can change this already existing variable and make it Multiple Single Value and change its processing Type to: User Entry/ Default, so that I don't need to go to all these more than 100 queries and replace this with new one. (It doesn't allow this directly).
Please mention if there is some other way to achieve this.
Best Regards,
Sumita

Sumita,
you can try (with some test before) to do some change on DB table RSZGLOBV properties...
Hope it helps!
Bye,
Roberto

Similar Messages

Trying to get safari search history for past 3 weeks. Way to change one week default setting?

trying to get safari search history for past 3 weeks. Way to change one week default setting?

trying to get safari search history for past 3 weeks. Way to change one week default setting?

TS2756 Is there a way to change the name of my hotspot network from iPhone4 to something else?

I want to change the name of my personal hotspot from iPhone4 to something else. Is this possible?

The Personal Hotspot name (SSID) is taken from the name of your phone. So, if you want to change it, change the name of your phone:
Settings>General>About>Name.

Is there a way to change log processing settings?

The new log processing feature is awesome! I just find the Blackmagic Production Camera 4K setting not very accurate. The yellow seems to be very saturated for me, among other things. It would be nice to include other LUTs in that pop up menu. Is there any workaround? I know about the "LUT utility" and I am using it, but setting the right gamma curve and colors from the media browser without render would be a lot better.
Adriano Plotzki

Hi,
a quick look at the JavDocs (http://docs.oracle.com/cd/E23549_01/apirefs.1111/e10686/oracle/adf/share/config/ADFConfigImpl.html) tell you : No
Frank

Is there a way to change the default export setting in adobe premier pro cs6?

Every time I do an Export in Premiere CS6 (lots of them daily!), Export Settings open as AVI.
99% of times I use H-264 for that purpose.
It's really annoying and time waisting change settings every export I must do!
Any solution, please?...
Thanks!
ANGELO SANDE

You can create an action.
Record the action then go to file export select jpeg and then the quality etc and then exort and stop recording the action give it a keyboard shortcut.

How to change to MobileMe and set up multiple mailboxes

My IPhone is currently set up with my desk top computer email server as my primary mail server on my IPhone and I want to change it to MobileMe and add some inboxes for that account. How do I do that?

A MobileMe account is accessed as an IMAP account. All server stored mailboxes with an IMAP account will be available automatically when accessing the account with the iPhone's Mail app and all server stored mailboxes are kept synchronized with the server with each email client used to access the account.
Unless your other email account is an Exchange or IMAP account, you won't be able to do the same with the other account. Server stored mailboxes are not available with a POP account.
The only way to have the same mailboxes on your iPhone that are available with Mail.app on your Mac is with an Exchange or IMAP account with server stored mailboxes with the account.

Date bug in import process: 2 sets of dates from same-day shots

I took some photos the other day using my Canon 400D. Some were taken around 1:00 pm, and another series of them were taken around 4:00 pm. I then went to import them into Lightroom from a CompactFlash card, using a cardreader, by using the organize by date option with the format 2005\2005-12-17. When Lightroom's import process gathered the file data for the images, I discovered that there were two sets of dates, viz. 2007\2007-02-24 and 2007\2007-02-25. Considering that I was doing the import on 2007-02-24, the second date was quite in error.
I checked the EXIF data and the files seemed OK. The timestamps on the files on the card were also as expected.
I then manually copied the image files to a temporary folder on my PC. When I pointed Lightroom's import function to that folder, lo and behold, the files were picked up and the correct single date for the target folder was set up for me.
Has anyone else come across this problem? Any suggestions how to work around it from WITHIN Lightroom if it occurs again?
Witold

Are you by chance using Vista? That would be a "Known issue", the workaround being copying the images to the hard drive and importing from there instead of importing directly from the card/camera.
Alexander.
Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

Is there a way to change the iCloud account on my iPhone from one email to another without deleting the first account or deleting the information currently on my phone?

Right now my iCloud is synced through our family Apple ID. It wasn't a problem until my mom got an iPad and synced it to the same Apple ID, so now she receives all of my iMessages and FaceTime messages. I have created my own Apple account, but how do I change the Apple ID to the new one without deleting the information currently on my phone?

First, turn everything off for iCloud...contacts, calendars, FaceTime, iMessage, notes, Find My Phone, etc. You'll be prompted to keep the data on your phone or delete it...select keep. Then: Settings>iCloud...scroll down...delete account. Then, set everything back up using your new ID.

Is there a way to change the rating scale into a multiple choice feature?

I like the format of the rating scale however, I would like the option to select more than one choice in a row.
Is there a way I can incorporate the multiple choice feature into a chart like the rating scale?

Hi Cashmoneydonuts,
You can create an animation for this using Edge Animate, and add it to Muse.
The following link might be helpful:
Liven up Adobe Muse CC sites with animated effects | Adobe Inspire Magazine
Regards
Sonam

How do you set up multiple from addresses in mail

on my ipad when I set up email accounts, i can enter multiple addresses in the Email field, separated by a comma, which is located on the keyboard far right, second symbol screen.
On my iphone 5 there's NO COMMA that I can find on any of the three Keyboard screens when you're in the Email field.
What's up with that?
I'm running ios 6 on both devices

Beth, I ran into the same issue.
What I did was this:
(1) Go into the Note app and enter your comma-delimited list of email addresses.
(2) Copy the list and paste it into the Mail settings where you tried to enter it.
It works fine that way.
Note however that if you are using the default Gmail settings there isn't a separate field for your email address and username - they are the same. So you will get an error when you try to save. However, if you use the manual setup where there are separate fields for username and email address this will work.
You can even add the extra email addresses to another non-Gmail account and when you try to send you can select the alternate email address.
doug

Setting up multiple from Accounts

Sorry for the poor title.
Small company with one Exchange server running 2010, users are using Outlook 2010, users eith use one of two domains depenpeng what part of the company they are in.
Example email addresses might be [email protected] and
[email protected]
Now along comes user25 who had an email address od
[email protected] but now requires an email address in the billy domain as well so that he can reply to emails from either address and receive emails to one in box.
So I set user25 with an email alias in Exchange server 2010 his properties of [email protected]
Then followed the instructions to set up a dummy pop3 account on his client outlook application but this all failed to work.
Can anyone tell me the correct way to achieve this, do I need to tell the exchange server that a pop3 dummy account has been added to the clients properties?
Help please
Mark.

The easiest way to handle this is to create a distribution group for one mailbox, and set that mailbox so it can send from the distribution group. In your example above,
[email protected] needs a second email address, so you create a distribution group with the email address
[email protected], and only Stuart's mailbox is a member of it. Then you grant Stuart's mailbox rights to send from this distribution group (using the same commands you would for a mailbox, as follows:
Add-AdPermission <distribution group alias> -User <mailbox alias> -AccessRights ExtendedRight -ExtendedRights 'send as'
Then, in Outlook, add the From field to the messages and add the distribution group as a valid From sender and you are set. The user will need to determine from the messages which address they need to respond from, though.

Errors while Changing the Database to Mutli User Mode from Single user mode in SQL Server 2012

Hi,
Good Afternoon :). Need your help in resolving one of the issue with SQL Server 2012.
Today, we kept one of the database in the Single User mode and wanted to bring back to Multi User mode. But we are getting the below error. There are no user sessions connected to this database which are blocking each other. I see multiple
SYSTEM sessions are in blocked state.  The blocking is not cleared even affter restarting the SQL services.
Verified the SQL Server Errorlog and couldnt get much useful information to troubleshoot the issue.
pasted the information from the sys.sysprocesses as well for your kind reference.
Msg 1205, Level 13, State 68, Line 1
Transaction (Process ID 55) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
spid
kpid
blocked
waittype
waittime
dbid
login_time
status
cmd
18
1004
36
0x0005
144
5
4/9/2014 13:13
background
TASK MANAGER
35
1796
36
0x0005
35
5
4/9/2014 13:34
background
TASK MANAGER
36
2464
37
0x0005
363
5
4/9/2014 13:34
background
TASK MANAGER
37
5100
36
0x0005
254
5
4/9/2014 13:04
background
TASK MANAGER

Clearly 36 and 37 are causing deadlock.
see
https://www.simple-talk.com/sql/database-administration/handling-deadlocks-in-sql-server/
http://www.mssqltips.com/sqlservertip/1036/finding-and-troubleshooting-sql-server-deadlocks/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Is there any way to change "Primary/Reporing Set of books " option in SOB

Hi,
Is thier any way , to change the primary/reporting set of books option , which is enabled in MULTIPLE REPORTING CURRENCY TAB in "Set of Books" winow in Financial applications.
Once defined , I was not able to change the option.
Rgds

Looks like more of the functional issue.
Sumit,
It will be good if you can provide the link of that thread in financial forum which you replied. That will maintain the link :)
--Shiv

Right Way to change MBOs Connections

Hellow Experts,
I'm really enjoying the communication here, and I got a new one.
Whats the right way of change MBOs Connections to SAP for instance?
I tried 2 methods.
Method One
Title: Its just too much Work
Proceeding:
I start rebinding every MBO and operatios to the new Connection.
Drawback:
If i have 1 MBO it may takes 30 seconds if they are 40 or 50 mbos it will take a lot of time.
there are the output tables from bapis are recreated if dont they are deleted.
so you have to reimplement all the operations one again. and it as the adicional
problem that we all can miss something and do something wrong.
Method Two
Title: Simpler way
Proceeding:
change the connection profile itself at workspace from DEV->QA or QA->PRD
Drawback:
supposing that you want independence between the apps connections like app1 is on DEV and ap 2 is on PRD.
this will led to N connections per N applications.
DEV: (Development)
QA: (Quality)
PRD: (Production)
I would like to know if you guys have more approaches and what you think of this ones.
Cheers,
Laguerta

Daniel Laguerta
I will never follow method one as suggested by you.
To add for the "Method 2", i will create a separate (new) workspace for different instance like DEV, QA, PROD.
eg. Once DEV is done, i ll export the whole project, and import the same in a new workspace for QA.
Create a new SUP QA and SAP connection profile
Change connection profile to each mbo and its operations.
And deploy to SUP QA Env
Still it is time consuming.
there is another method (should be preferable)
Deploying mbo package from SCC instead of creating workspace and connection profiles.
Deploying MBO from Sybase Control Center (SCC)
Regards,
JK

Missing resources: is the '!' (bang) character special in some way?

Hello all,
I have a very simple java application jar file that behaves differently depending on the path it resides in.
http://www.3feetunder.com/files/bangtest.jar (471K)
It works correctly if the path is:
c:\test
but not if the path is:
c:\!test
it seems that the '!' (bang) character is special in some way that prevents the icons in the jar file from loading.
Other characters are fine like...
c:\~test
c:\^test
c:\@test
they all work.
I'm using jdk 1.4.0 beta 3 if it matters.
Give it a try and let me know what the heck is going on.
Run it in \test first to see the toolbar icons, then run it in \!test to see them not load.
thanks in advance
Krick

Krick,
Yes, the bang character is special. It is used to construct a Jar URL. For example:
jar:file://c:/abc/images.jar/!hello.gif
refers to "hello.gif" in the jar "images" in the dir "c:/abc".
See the JarURLConnection class for more info.
-Ron

Some way to change variable 'Processing By' & set it Multiple from Single

Similar Messages

Maybe you are looking for