Some websites don't work in Safari when I VPN into my corporate networke

discussions.apple.com as well as facebook.com don't work if I'm connected to my corporate network using VPN. I am forced to use Camino in I want to access those sites. Does anyone know why?
Thanks!

You might try installing a fresh version of SafariStand and see if you still have the problem with dead links. I'm not familiar with the 'Quick Search' feature but you could have a look at Glims. Don't try to run both Glims and SafariStand together.

Similar Messages

Some links don't work in Safari

I ran a whole bunch of software updates a while ago (funny, after the entire process, nothing actually updated... I had to run it again later), and somehow, in the process, something went wrong with Safari. Now, some links don't work. It's mostly links in the content portions of webpages. For example, things like the Store/Mac/etc buttons at the top of the Apple site work fine, but things like links in forum signatures don't. I have to open them in a new tab. I tried updating Safari, but it didn't fix anything. I've tested Firefox and Camino and they work fine, but Safari is my browser of choice, so this is pretty irritating. Any ideas as to what's causing this and how to fix it?

You might try installing a fresh version of SafariStand and see if you still have the problem with dead links. I'm not familiar with the 'Quick Search' feature but you could have a look at Glims. Don't try to run both Glims and SafariStand together.

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
Anyone help you with your fix yet?

Behavior drag a layer don't work with safari 2

The behavior "move (drag) a layer" for Dreamweaver 8.02 don't
work with Safari 2 (it's work with safari 1). Is there an issue for
this problem ?
Thanks
Emmanuel

Yep - fails in Safari2.
It's hard to know who is responsible for that - I'm guessing
it's Apple,
since it works on FF2/Mac....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"emg75" <[email protected]> wrote in message
news:eqmh8m$o1d$[email protected]..
> Example :
>
http://www.cyberformateur.com/support/dream/bugs-dream/draganddrop.htm
>
> With safari 2, it's impossible to drag this layer. (it's
ok with safari 1)
>
> Thanks
>
> EmG

Quicktime movies on my website have stopped working w/ Safari.

The Quicktime movies on my website have stopped working with Safari. They work on Goggle Chrome and they worked before, but as of today, I get a "?" when I click on a video. Can anyone help?
http://abdulmalikabbott.com/main.php?video

Try reseting safari!

TS2771 Help! I just restored my ipod touch 2nd gen cos I needed a clear out. I went to sync some music back on, and it seemed to work. However when I went into 'music' it said 'no content'. I tried syncing music 3 times and it did the same every time. Hel

Help! I just restored my ipod touch 2nd gen cos I needed a clear out. I went to sync some music back on, and it seemed to work. However when I went into 'music' it said 'no content'. I tried syncing music 3 times and it did the same every time. Help!

Try plugging your ipod into your computer. Then start up itunes. Let it load everything. Then click on your ipod and play a song from your ipod's library. Not your itunes library. If it plays the song, then go ahead and stop it, disconnect your ipod, and check the content once again.
I had the same problem and beleive it or not, this worked. I synced my ipod like 5 times before finding this answer on the web. Let me know if I need to clerify anything.

After upgrade to os 4 some apps don't work including Apple Store

Upgrade went ok, but took long time. Some apps don't work correctly or crash. e.g. Apple Store app just recycles back to main screen. Starbucks app works for a few seconds then crashes.

I had same problems.
I decided to "downgrade" back to OS3. You can too!
Go to this thread and read about it. http://discussions.apple.com/thread.jspa?threadID=2473976&tstart=0

Muse don't work today? When I opload through FTP

Muse don't work today? When I opload through FTP, I only come to 68%, - and it comes no longer. I have waited 20 minutes, and still says 68% loaded. What is wrong?

Muse don't work today? When I opload through FTP, I only come to 68%, - and it comes no longer. I have waited 20 minutes, and still says 68% loaded. What is wrong?

For some reason I keep getting this message when I log into itunes: " itunes cannot locate the cd configuration folder, so you cannot cannot locatimport or burn cd's and dvd's. Thisimport folder must be in the same directory as itunes. " What happened?

for some reason I keep getting this message when I log into itunes: "itunes cannot locate the cd configuration folder, so you cannot import or burn cd's and dvd's." What happened?

http://discussions.apple.com/thread.jspa?messageID=3645581&#3645581

HT204053 I recently changed my e-mail account. I had to reset my apple I.D. and password. All was fine, now when I attempt to login to install updates it shows my old I.D. I don't understand this because when I go into settings it shows my apple I.D. as m

I recently changed my e-mail account. I had to reset my apple I.D. and password. All was fine, now when I attempt to login to install updates it shows my old I.D. I don't understand this because when I go into settings it shows my apple I.D. as my new one

I think what is happening is that you changed the email address for password recovery to the new one - the Appleid (and software "attached" to it) remain irrevokably linked to the id you purchased it with.
Regards,
Shawn

Dw cs4 -some links don't work, others do. whyyyyyyyyyy??????

My links to "directions" and "gallery" from the home page don't work. But, if you click on "request a quote" at the bottom of the home page, you can link to them from there. I can't figure out why. Also, as you can see my contact page shows up on a google search for "Codiac Printing" but not my index page. How can that be???
Can someone please tell me where I'm going wrong????
http://www.codiacprinting.com/contact.html

andyBall - Thank you so much for the dialog on this issue. I think we have narrowed this down to my router and the openDNS parental control service.
NetGear partners with openDNS. You get a paid OpenDNS account, then the NetGear router downloads a custom generated blacklist/whitelist into the router. You manage the list on the OpenDNS website, then your router pulls down the list and runs the known blacklist/whitelist locally, and then DNS queries go through OpenDNS.
I whitelisted metrics.apple.com and apple.com and everything works in Safari. Remove the whitelist, and it does not work again. OpenDNS also has a bypass application that you can run on the local machine to register your Mac/IP address, and get direct access to the ISP’s DNS bypassing the Netgear routers’s OpenDNS.
It’s funny that all the iOS device in the house work fine on apple.com, all the Firefox installs on PC work fine on apple.com. I even tried changing my Safari user agent settings and still the website version I get from apple.com has these long obscure urls in the default click, but if you right click or turn off JavaScript everything is fine.
I can only assume Apple is serving up some form of website JavaScript to help with website tracking for guest to their website that is specialized for safari. It is most likely that this url link is soooo long it is breaking on my router when it is checking it’s black list, causing the router url check buffer to fail on the router???

Why aren't some of my links working on Safari?

I'm on the most up-to-date version of Safari but for some reason some links just don't work.
I've noticed they are specifically PDF format links that won't open or download.
For my job, we use a website made by Oracle and when i go to check my pay stubs for that week, I can never open or download the link.
Now i've noticed it's not just that website but on others as well.
Should I download a plug-in or maybe switch browsers?

Try another browser as a test.
Firefox

Some links don't work in 10.6.5

After upgrading to 10.6.5 I observed that certain links just don't work anymore, f.i. when I click a weblink in my email it should open it automatically in Firefox. Instead nothing happens. I have to manually copy and paste the link into Firefox. Same thing happens within Facebook. It seems as if the system doesn't automatically recognize the browser. Any idea how to fix this? It is annoying!

I have a similar issue on two completely separate Macs since upgrading them to 10.6.5. After a few hours use, links within some web pages, in Safari, will resolve to very random places. For example I click a news article link on the Yahoo home page, and it takes me repeatedly to a monster.com job listing page. Or if I am in Yahoo mail and I clcik Calendar, it takes me right back to yahoo mail and does not open the calendar page. Totally repeatable once this behaviour starts. Tried using Firefox - same exact bugs occur there once this behavior starts.
If I run Cocktail and run the daily, weekly, and monthly scripts, the problem gets instantly fixed, for a few hours, then it eventually comes back. Cocktail always fixes it though.
It appears that some cache, perhaps the whatis or lookup databases, are getting corrupted in 10.6.5, such that links get resolved to the incorrect addresses.
Happens on my MacPro Quadcore i7 as well as a friends MacBook Pro 17, 2009 unibody. BOth started showing this problem on both firefox and safari after the 10.6.5 update.
Help!!!!

Links in published website don't work.

The majority of links in my published website (both online and when published to a folder) won't work. However, unpublished they work fine.The navigation bar and picture links fail, except for the first two pages. I've checked to make sure the links are forwarded to the front.
http://web.mac.com/melaniermaxwell
Any thoughts?

Ok, I checked that one and it didn't work for me too.
So these are my thoughts:
-I think you protected your photos by putting a textfield or a shape in front of the photos and that one is covering the links and that's why they don't work. If you didn't protect them you might however have something in front of the links. Move it a bit downward so that it is on the photo put not on the links or delete it.
-There aren't any other photos to link to and that's why they are disabled.
However I think it's the first one because I get a strange highlighted area when I try to highlight.
If it's none if these I'm out of ideas, sorry! Maybe someone else has some more...
Regards,
Cédric

Clean Install of Windows 8 & Some buttons Don't Work

I bought this PC with dead Hard Drive. I installed new Drive and Windows 8 from USB.It only installed as 32bit OS and I know it should have been 64bit. Has 4Gb memory installed.Property screen shows: 4.00GB (2.97GB usable)(32bit OS, x64 Processor). Some of my buttons Don't Work nor does my Microphone. I have tried verifying all drivers but none fix buttons. No errors listed in Device Manager. Any help is Appreciated.

Wow that is so a "Canned" response. Can't install Windows7 on a system that never had 7. This unit was made originally for Vista. And even those do not have drivers I could use. Now if there were device manufacturer information you could give me about my unit then maybe I can get the buttons to work. The most important is the Microphone and Volume/mute buttons that need to work then you could help me.The Dell site will give you an exact biuld list when serial or Tag number is provided which help Identify device manufacturer so user can goto their site to get generic drivers to work with their Dell PC regardless of what version of OS is currently installed.So if you can really help here is the PC Info»HP TouchSmart IQ524 Desktop PC
Serial Number: 3CR9240GJN
Product Number: NC701AA

Some websites don't work in Safari when I VPN into my corporate networke

Similar Messages

Maybe you are looking for