Some X-fi surround 5.1 (all soundblasters) questions...

hello, (first i want to inform you that i life in the netherlands and that my english is not two good)
What i have here is a creative surround 5. (usb) card/box with front rear center/sub outputs.
in my software (on my pc) its forwarded to 5. (in movies it all works well becouse of the 5 channels)
but when i want to play (for example) an mp3 with two channels (everything with two channels only)
my center/sub output is not working (explainable)
so my question is:
is it possible to forward a mono signal of the stream to the center/sub channel so i don't have to rigg everything up after watching a movie ? i've tried to do it with ffdschow but can't fix it.
configuration:
3 amp's (200W per channel) all with 2 outputs so in total 6 channels but amp in mono for the center/sub config.
speakers:
front L+R (250W in total max 8ohm)
rear L+R (250W in total max 8ohm)
center with filter (for the mid/hy frequenties) same amp as subs. (200w in total 8ohm)
2 subs with low filter (200W 8ohm each)
want to have somewhere in the future a 4th one for my center only. :P (pre out on other amp)

; Hi,
Not sure whether I got your problem correct. You are having issue getting audio out from your center channel when you play 2 channel audio such as mp3. If so, did you try to enable the CMSS feature? It is suppose to upmix your 2 channel audio into multi-channel audio for you.

Similar Messages

  • My form has a list of yes or no questions.  I want to use either cheboxes or radio buttons.  I can't make it work.  When I check yes for one question, it marks all yes answers for all other questions.  If I mark some radio buttons to answer, it unmarks la

    My form has a list of yes or no questions.  I want to use either cheboxes or radio buttons.  Unfortunatly I can't make it work.  When I check yes for one question, it marks all yes answers for all other questions.  If I mark some radio buttons to answer, it unmarks later.  Need immediate help!!!

    Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
    For example, if you had:
         Question 1 and Question 1 Yes/No checkboxes
         Question 2 and Question 1 Yes/No checkboxes
         Question 3 and Question 1 Yes/No checkboxes
         Question 4 and Question 1 Yes/No checkboxes
    Then whatever answer you selected in Question 1 would populate down through the rest of the form.
    Changing the Yes/No field properties in questions two through four would eliminate the problem.
    I hope that helps,
    Brian

  • I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same.  Any ideas

    I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same.  Any ideas

    Have you tried resetting the SMC ?     >  Resetting the System Management Controller (SMC)

  • How to explain.  OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external.  All can be viewed in itunes, but none on the external will sync to my iPad.  What's up with that.

    How to explain.  OK 1st all photos are visible in my iPhoto library; however, some are stored on hard drive and some are stored on external.  All can be marked or unmarked in itunes, but none of the photos stored on the external drive will sync to my iPad.  Anybody know what's up with that?

    What really cheeses me off here is that Apple isn't allowing users enough customization.  With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options.  If Apple keeps this up, they're going to start losing customers fast.  I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
    What I don't understand about how they won't let users delete the list of available podcasts now is why?  How is this making it a better program?  I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was).  But to not give users the option to delete that list?  It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating.  I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature.  It smacks of rank incompetence.
    What improvement were they trying to make here anyway?  There was nothing wrong to my mind about how podcasts were managed in previous versions.  Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
    And reverting to a previous version is no solution.  I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

  • Can edit some photos in Photoshop, but not all

    Hi, I recently had to archive and install for a system problem. When I tried to edit photos from iPhoto in Photoshop (which always worked before), I had problems, so I reinstalled Photoshop (actually twice). Now most of my photos will open in photoshop I go to edit them, but there are a few albums that won't. Is there any reason why some would not open, even though all my preferences are set to edit in Photoshop? Thanks!

    'm sorry to jump into this - but I've never posted to one of these before. I'm having a similar trouble - I tried to change the folder names (in Pictures through Finder not iphotos) and lost access to most of my 2007 photos. The thumbnails are there. I tried deleting and reimporting. I've done all I can think of - restored from trash, deleted and reimported on a thumbdrive. You name it. Finally I got it all straight - went through all 1000+ photos and they appeared - deleted the extras out of trash - went back to remake a slide show and now I'm right back to where I started somehow.
    Problem is that all the solutions I can find have a rebuild of the entire library - and I'm terrified to do this as I have photos dating back to 2001 that I do not want to lose or lose access to. I have all these photos in larger groups on another computer - so I could delete 2007 altogether - and reimport - but they are a subset of the photos on the other computer and that is a tremendous amount of work.
    Any pointers on what to do that will ONLY affect 2007 photos. I feel like I'm going mad. Really want to get this solved and would appreciate any help. As you might imagine - I'm not very good with these things - so the simpler the directions the better

  • I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?

    I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?  Using iOS 10.7.5

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

    I receive daily emails from the NY Times, which I read from my Ipad. Some of the emails will show all of the stories available, and some will only show a few lines in the body and the rest of the email is blank. Any ideas of what I need to do to fix this?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • My Macbook displays photographies often quite dark, so that some details are not visible at all. Is it possible that the LED-light is defective or could there be other causes?

    My Macbook displays photographies often very dark, so that some details are not visible at all. Can there be a problem with the LED light?

    You could turn up the brightness of your display.  It's also possible the backlighting has gone bad.

  • Indesign master page putting the images on the master in teh middle of some of my pages but not all

    indesign master page putting the images on the master in teh middle of some of my pages but not all =[

    We'll need some more information, and probably a few screen shots, like the master page and one of your pages where the image is not showing.

  • My Iphone 4, to which all my outlook email is forwarded to. is only receivng some of the emails but not all. It has worked beautifully in the past but no longer. What can I do to get all emails?

    My Iphone 4, to which all my outlook email is forwarded to. is only receivng some of the emails but not all. It has worked beautifully in the past but no longer. What can I do to get all emails?

    I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
    If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414).  You will be given the option to restore to that backup at the end of the restore process.  Your messages are stored in the backup so restoring to the backup will return the messages to your phone.  Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

  • HT3529 I can text some of my contacts, but not all...why?

    I can text some of my contacts, but not all...why?

    excellent question. maybe you could give us some more information such as
    what happens when you try?
    is there anything in common with all the people you can't text (like they all own iphones or they all don't)?

  • Certain events in iPhoto will not sync to my iPad. No Error messages comes up and the photos themselves are ok. its like my ipad doesn't see them. Cause i can get some photos on there just not all.

    certain events in iPhoto will not sync to my iPad. No Error messages comes up and the photos themselves are ok. its like my ipad doesn't see them. Cause i can get some photos on there just not all. Photos are from the same camera and should all be in the same format.

    What is the file name of the video(s) you want to sync?
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • Some Artwork On My Ipod Shows All In Black

    Hi, I'm new in the forum, I hope someone can help me.
    I've been uploading all the artwork on my ipod, but some of the album covers show all in black and I don't know why and what to do, does anyone have the answer? Thanks!!!!!!!
    Greetings

    I'm not sure, but I've been doing both, uploading to the itunes library first, and the I skip that part and put it directly to the ipod. But I'll try to put all the artwork on the itunes library first, thanks.

  • I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all

    I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?

    If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
    It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful.

  • Downloaded adobe reader, i have been inputting info into some forms, the areas I populate all have red squares around them, what does this mean?

    downloaded adobe reader, i have been inputting info into some forms, the areas I populate all have red squares around them, what does this mean? mac book pro as well. The forms i have been working on are from Canada Immigration, has any one else experienced this? thanks and yes I am new here, lol.

    Yes thank you I figured it out. Lol
    Sent from Samsung Mobile

Maybe you are looking for

  • How do I enable Corel Clipbook in Firefox 26, it works in IE8 but not FF26?

    I am trying to get the Corel/Woodperfect utility CLIPBOOK (Version 16.0.0.427) to work in FF26. The utility is like windows clipboard but handles multiple entries and functions with most windows programs. It permits cut and paste between programs lik

  • HT5271 blocked plug ins, how do i stop this?

    blocked plug ins, how do i stop this?

  • PO Needs to Be Resent

    I created a PO, but there was a document error and need to resend it for approval. How would I do this? I also tried to cancel the PO, but since the approval status is "in process" I can't do that either.

  • Default customer type not set by default

    hello, we are having and issue with the "customer type" not being set by default. When a new customer is created (when they make a purchase) I would like them to be set as "Retail Customer" as their customer type . I have set the default customer typ

  • IMovie is trying to optimize - can I make it stop??

    I imported some video, and it has been attempting to optimize. I finally force-quit and used the old iMovie HD just to finish the project. Now i have relaunched iMovie and it's picking up where it left off. Saying it will be 96 hours to finish optimi