Somebody, Please give me "medicine" for my phone.....

My messaging software become worst (always make my phone stuck while sending a message). Almost 5 times I reset my phone using master reset. But it still the same...
For your info, I used Nokia 3250 and I just buy it about 2 month ago..
Mohd Hafiez Afifi Mohd Helmi

Try taking it back to the place you got it from - show them the problem and see if they'll give you a replacement...
If not, try taking it to your nearest Nokia Service Centre - www.nokia.com/repair
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Similar Messages

Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

Hi can somebody please help me to get Apple phone support stop calling me to tell me that i NOT awnsering the phone!!!!

The battery capacity on a 5S is a little better but be sure to read the special notes on conserving battery power on these phones. Here are two in particular.
17 Tips to Extend iPhone Battery Life (Updated for iOS 7)
How to improve iPhone battery life, what to do if your iPhone battery is running low - How to - Macworld UK
Regards, 71

Sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem lcommonly battery problem

sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem commonly battery problem please can this be resolved
its not related to any hardware because last year april i got replacement new phone from apple and i maintained it well...!

Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups
Also take a look at these tips to prolong the battery life again:
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

My ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that

Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps.

Please give some inputs for Sales order costing

please give some inputs for Sales order costing

Dear Chandu
If you use the valuated sales order stock, the actual cost of goods manufactured is updated to the sales order item (item in an inquiry, quotation, or sales order) under an inventory change cost element.
If you use the nonvaluated sales order stock, the actual cost of goods manufactured is updated to the sales document item under a settlement cost element or a source cost element.
Sales and administration costs are updated under a separate cost element.
Thanks
G. Lakshmipathi

Can somebody please delete a post for me?

Can somebody please delete this thread: https://discussions.apple.com/message/18023979#18023979
It contains personal information I do not want others viewing. If possible, can you also delete this threat afterwards?

I will ask a forum moderator to have it deleted, but I have no control over whether or not they do get deleted. Also, I'd give it a day or so, it won't be instant. I'm not sure what their hours are.

Please give me answers for the following interview questions ?

Dear friends,
Greets............................................
Pls give me solutions for th following questions?
1.How to record BDC using Call Transaction without screen sequence of a particular transaction code?
2.How to initiate the Call Transaction by coding without using Call Transaction Mode 'S' or 'A'.
3.How to run the BDC program without legacy file from Presentation Server. If Application Server how?
4.How BDC overcomes BAPI?
5.Difference between Function Module and BAPI.
6.How to create a BAPI.
7.How to display Footer text in last page of the script.
8.How to display Footer text in last page of the script without touching the layout only using print program.
9. Standard text creation without using SO10 . How to save?
where to save? How to include in the print program?
10.How Script overcomes Smartforms?
11. How to access smartforms thru programs without using SSF_FUNCTION_MODULE_NAME.
12.In smartforms First page should be portriat and second page must be landscape format. Is it possible?
13.How to create internal table globally.
14. How to delete F4 help for a particular field in the selection screen.
15.How to set the password field in the selection screen as it is in the initail screen containing Client, Username,Password.
17. How to use the Hash table algorithm and how access it.
18. Prerequisites for FOR ALL ENTRIES.
19.MENTION the Tcode for performance issue Other than SLIN,SE30,ST05 ?
20. Table Types?
21SAP LUW
22.Types of Lock objects.
Thanks in Advance********************************************
Regards
Raj kumar

For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Hi,
Please go through the following :
ABAP Interview Questions
1. How data is stored in cluster table?
Each field of cluster table behaves as tables which contains the no. of entries.
2. What are client dependant objects in abap/sap?
SAP Script layout, text element, and some DDIC objects.
3. On which even we can validate the input fields in module progams?
In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
5. How do you get output from IDOC?
Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
6. When top of the page event is triggered?
After excuteing first write statement in start-of-selection event.
7. Can we create field without data element and how?
In SE11 one option is available above the fields strip. Data element/ direct type.
8. How do we debug sapscript?
Go to SE71 give lay set name , go to utilities select debugger mode on.
9. Which transaction code can I used to analyze the performance of ABAP program.
TCode AL21.
10. How can I copy a standard table to make my own z_table.
Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
1. What is the use of 'outerjoin'
Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
In case of inner join there should be an entry in al the tables use in the view.
2. When to use logical database?
Ans. Advantage of Logical databases:
less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
3. What is the use of 'table index'?
Ans .Index is used for faster access of data base tables.
4. What is the use of 'FOR ALL ENTRIES'?
Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
Performance wise SELECT FOR ALL ENTRIES is better to use.
5. Can you set up background processing using CALL TRANSACTION?
Yes,Using No Screen Mode.
6. What are table buffers?
Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
Buffering is useful if table needs to be accessed more no. of times in a program.
ABAP Technical Interview Questions:
1. What is the typical structure of an ABAP program?
2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
3. What should be the approach for writing a BDC program?
4. What is a batch input session?
5. What is the alternative to batch input session?
6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
9. What do you define in the domain and data element?
10. What are the different types of data dictionary objects?
11. How many types of tables exist and what are they in data dictionary?
12. What is the step-by-step process to create a table in data dictionary?
13. Can a transparent table exist in data dictionary but not in the database physically?
14. What are the domains and data elements?
15. Can you create a table with fields not referring to data elements?
16. What is the advantage of structures? How do you use them in the ABAP programs?
17. What does an extract statement do in the ABAP program?
18. What is a collect statement? How is it different from append?
19. What is open sql vs native sql?
20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
22. What are the events in ABAP language?
23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
24. What is a drill down report?
25. How do you write a function module in SAP? Describe.
26. What are the exceptions in function module?
27. What is a function group?
28. How are the date abd time field values stored in SAP?
29. What are the fields in a BDC_Tab Table?
30. Name a few data dictionary objects?
31. What happens when a table is activated in DD?
32. What is a check table and what is a value table?
33. What are match codes? Describe?
34. What transactions do you use for data analysis?
35. What is table maintenance generator?
36. What are ranges? What are number ranges?
37. What are select options and what is the diff from parameters?
38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
39. What are selection texts?
40. What is CTS and what do you know about it?
41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
42. What is the client concept in SAP? What is the meaning of client independent?
43. Are programs client dependent?
44. Name a few system global variables you can use in ABAP programs?
45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
46. How do you take care of performance issues in your ABAP programs?
47. What are datasets?
48. How to find the return code of a stmt in ABAP programs?
49. What are interface/conversion programs in SAP?
50. Have you used SAP supplied programs to load master data?
2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
2. What are logical databases? What are the advantages/disadvantages of logical databases?
3. What specific statements do you using when writing a drill down report?
4. What are different tools to report data in SAP? What all have you used?
5. What are the advantages and disadvantages of ABAP query tool?
6. What are the functional areas? User groups? How does ABAP query work in relation to these?
7. Is a logical database a requirement/must to write an ABAP query?
8. What is the structure of a BDC sessions.
9. What are Change header/detail tables? Have you used them?
10. What do you do when the system crashes in the middle of a BDC batch session?
11. What do you do with errors in BDC batch sessions?
12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
13. Is it possible to run host command from SAP environment? How do you run?
14. What kind of financial periods exist in SAP? What is the relevant table for that?
15. Does SAP handle multiple currencies? Multiple languages?
16. What is a currency factoring technique?
17. How do you document ABAP programs? Do you use program documentation menu option?
18. What is SAPscript and layout set?
19. What are the ABAP commands that link to a layout set?
20. What is output determination?
ABAP Interview Questions
1.Without using Tcode SE11, How can we enter the values in to the table???
2.What is the difference between Collect statement and Append Statement???
3.What do you mean by correction and Transportation system???
4.What is the difference between User Exits and BADI????
5.How can we identify User exits in our screen???
6.What do you mean by Inbound and Outbound interface???
7.In realtime do we configure ALE systems or Administator will take care of that??
8.How to release an object???
9.What is the flow of a Sales document???
10.What is the flow of Purchase order???
12.What is the flow of Invoice???
13.What are the standard IDOC's used???
14.What do you mean by table control???Where will we use this???
15.What are field symbols??Where will we use these symbols???
Deepti
1. There are other ways of entering data into a DB table. ex. B D C
2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
Append will append/add a record at the end of existing records
8. to release an object - use se10/se9
9. sales doc flow: S. A. - S. O. - Delivery - Billing
12. Delivery - invoice.
15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
Kishore
1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
2. collect will not allow duplicate entries, while append can allow duplicates.
3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
methods for enhancement.
14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
is step loop can be expanded to two lines table controls can`t.
15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
the fields considered,it doesnt allocate any memory for it.
Venu Rapolu
1. Ans: Using BDC., LSMW,,ALE., BAPI
2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
values., and append will simply adds the record
3 . Ans: The CTS contains work bench organizer and transport system :
The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
The transport system is used to move objects from an SAP dev.system to production system
6. Ans: Outbound interface is used to send IDocs to the ALE server.,
Inbound interface is used to Analyse the received Idoc.
7. Ans: We (ABAPers) don't do.
8. Ans: se09 or se10
13. Ans: MATMAS
CREMAS
DEBMAS
GLMAST etc...
14. Ans: to display records in table format., we use in Screens
15. Ans: we assign the field content at run time with ASSIGN stmt.
Satish D
1. goto se16 u can view the table contents
2. collect will collects all the numeric fields of nonnumeric field values
append will append record at the end of table
3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
transport request from our dev.class(system) by using se09
4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
5. go to system then status
6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
7. no we have to configur that
8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
and number enter them and relase by pressing jeep button
9. inquiry
quotation
sales order
shipping
delivery
invoice
return goods
12. after creation of delivry note invoice is prepared
13. master_idoc_distribute will generate standard idoc
Deepti
I am enclosing some of answers which I know.
1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
matches to your selection criteria.
3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
5 .We can identify User exits by using transactions CMOD and SMOD.
6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
Answers to some ABAP Interview Questions:
Questions which I have faced in an interview:
1) What is runtime analysis? Have you used this?
2) What is meant by performance analysis? Have done anything to improve the performance?
3) How to transfer the objects? Have to transferred any objects?
4) How did you test the developed objects?
5) What is the difference between SAP Memory and ABAP Memory?
6) In order to upload Purchase order details, how you handle multiple values for a single field?
Eg: Item field may contain no. of values for a record
7) What is the procedure you followed to upload the data?
8) How did you handle errors in Call Transaction?
9) Among the Call Transaction and Session Method, which is faster?
10) What are the difference between Interactive and Drill Down Reports?
11) How to pass the variables to forms?
12) How to create a link between modified form and modified print program?
13) What is the table, which contain the details of all the name of the programs and forms?
14) How did you test the form u developed? How did you taken print?
15) What are Standard Texts?
16) What is the difference between Clustered Tables and Pooled Tables?
17) What is pf-status?
18) Among "Move" and "Move Corresponding", which is efficient one?
19) What are the output type and Tcodes?
20) Where we use Chain and Endchain?
21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
22) In select-options, how to get the default values as current month first date and last date by default?
Eg: 1/12/2004 and 31/12/2004
Go thru these answers:
1) What is runtime analysis? Have you used this?
It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
2) What is meant by performance analysis? Have done
3) How to transfer the objects? Have you transferred any objects?
4) How did you test the developed objects?
I was testing a developed object. There are two types of testing
- Negative testing
- Positive testing
In negative testing we will give negative data in input and we check any errors occurs.
In positive testing we will give positive data in input for checking errors.
8) How did you handle errors in Call Transaction?
We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
Below messages are go to internal table. when you run the call transaction.
- Message type
- Message id
- Message Number
- Variable1
- Variable2
- Variable3
9) Among the Call Transaction and Session Method, which is faster?
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
10) What are the difference between Interactive and Drill Down Reports?
ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
Drill down report is nothing but interactive report...drilldown means above paragraph only.
11) How to pass the variables to forms?
12) What is the table, which contain the details of all the name of the programs and forms?
Table cont

Please give me flowchart for this code...

Writing a Java applet to communicate with a serial device attached to the Device
Server is very straightforward. However, familiarity with Java programming and a
Java compiler are required.
As with any network application, open a communication channel to the remote
device. In our example, a socket is opened and and two data streams are created to
perform the actual sending and receiving of data.
The following example uses a new Java Class called tcpip. Copy the following code
into a file called tcpip.java.
import java.*;
import java.lang.*;
import java.net.*;
import java.util.*;
import java.io.*;
* This class opens a TCP connection, and allows reading and writing of byte
arrays.
public class tcpip
protected Socket s = null;
public DataInputStream dis = null;
protected DataOutputStream dos = null;
public tcpip(InetAddress ipa, int port)
Socket s1 = null;
try { // Open the socket
s1 = new Socket(ipa.getHostAddress(), port);
catch (IOException e) {
System.out.println("Error opening socket");
return;
s = s1;
try { // Create an input stream
dis = new DataInputStream(new
BufferedInputStream(s.getInputStream()));
catch(Exception ex) {
System.out.println("Error creating input stream");
try { // Create an output stream
dos = new DataOutputStream(new
BufferedOutputStream(s.getOutputStream()));
catch(Exception ex) {
System.out.println("Error creating output stream");
public synchronized void disconnect()
if (s != null) {
try {
s.close();
catch (IOException e){}
public synchronized void send(byte[] temp)
try {
dos.write(temp, 0, temp.length);
dos.flush();
catch(Exception ex) {
System.out.println("Error sending data : " + ex.toString());
public synchronized void send(byte[] temp, int len)
try {
dos.write(temp, 0, len);
dos.flush();
catch(Exception ex) {
System.out.println("Error sending data : " + ex.toString());
public synchronized void send(String given)
// WARNING: this routine may not properly convert Strings to bytes
int length = given.length();
byte[] retvalue = new byte[length];
char[] c = new char[length];
given.getChars(0, length, c, 0);
for (int i = 0; i < length; i++) {
retvalue[i] = (byte)c;
send(retvalue);
public synchronized byte[] receive()
byte[] retval = new byte[0];
try {
while(dis.available() == 0); /* Wait for data */
catch (IOException e){}
try {
retval = new byte[dis.available()];
catch (IOException e){}
try {
dis.read(retval);
catch (IOException e){}
return(retval);
public int available()
int avail;
avail = 0;
try {
avail = dis.available();
catch (IOException e) {}
return(avail);
Next, create the Text_io class as the application. Copy the following code
into a file called �Text_io.java�.
import java.awt.*;
import java.awt.event.*;
import java.lang.*;
public class Text_io extends Panel implements Runnable,
TextListener {
private tcpip gtp;
String oldmessage = new String("");
TextArea input_box = new TextArea("", 10, 60, 3);
TextArea output_box = new TextArea("", 10, 60, 3);
Thread timer;
public Text_io(tcpip tp) {
gtp = tp;
setLayout(new GridBagLayout());
GridBagConstraints c = new GridBagConstraints();
c.insets = new Insets(5,5,5,5);
setBackground(java.awt.Color.lightGray);
setSize(561,380);
c.gridx = 0; c.gridy = 2; c.gridwidth = 1; c.gridheight =
1;
c.weightx = 0.0; c.weighty = 0.0; c.anchor =
GridBagConstraints.WEST;
c.fill = GridBagConstraints.NONE;
add((new Label("To Device Server: (Type Here--->)")), c);
//input_box
input_box.addTextListener(this);
c.gridx = 1; c.gridy = 2; c.gridwidth = 3; c.gridheight =
1;
c.weightx = 0.5; c.weighty = 0.0; c.anchor =
GridBagConstraints.CENTER;
c.fill = GridBagConstraints.BOTH;
add(input_box,c);
c.gridx = 0; c.gridy = 4; c.gridwidth = 1; c.gridheight =
1;
c.weightx = 0.0; c.weighty = 0.0; c.anchor =
GridBagConstraints.WEST;
c.fill = GridBagConstraints.NONE;
add((new Label("From Device Server:")), c);
c.gridx = 1; c.gridy = 4; c.gridwidth = 3; c.gridheight =
1;
c.weightx = 0.5; c.weighty = 0.0; c.anchor =
GridBagConstraints.CENTER;
c.fill = GridBagConstraints.BOTH;
add(output_box,c);
output_box.setEditable(false);
timer = new Thread(this);
timer.start();
public void run() {
int i;
byte[] in;
Thread me = Thread.currentThread();
while (timer == me) {
try {
Thread.currentThread().sleep(200);
catch (InterruptedException e) { }
if ( (gtp != null) && ((i = gtp.available()) > 0) ) {
in = gtp.receive();
/* remove non-printing bytes */
for (i = 0; i < in.length; i++) {
if (in[i] < 0x20)
in[i] = 0x20;
output_box.append((new String(in)));
public void textValueChanged(TextEvent e) {
int len, i;
String str = new String("");
String message = input_box.getText();
len = message.length() - oldmessage.length();
if (len < 0) {
for (i = 0; i < -len; i++)
str += "\b";
//System.out.println("Backspace");
else if (len > 0) {
str = message.substring(oldmessage.length());
//System.out.println("len = "+str.length()+" str =
"+str);
oldmessage = message;
if ( (len != 0) && (gtp != null) )
gtp.send(str);
Next, create the actual applet that uses the tcpip and Text_io classes. Copy
the following code into a file called �Test.java�.
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
import java.net.*;
import java.io.*;
import java.lang.*;
import java.text.*;
import java.util.*;
public class Test extends Applet {
static private boolean isapplet = true;
static private InetAddress arg_ip = null;
static private int arg_port = 0;
public tcpip gtp = null;;
InetAddress reader_ip = null;
int port = 10001;
public void init()
gtp = null;
reader_ip = null;
port = 10001;
public void start()
String st = new String("TCP/IP connection status: ");
setFont(new Font("Dialog",Font.BOLD,16));
setLayout(new GridBagLayout());
GridBagConstraints c = new GridBagConstraints();
c.gridx = 0; c.gridy = 0; c.gridwidth = 1; c.gridheight
= 1;
c.anchor = GridBagConstraints.CENTER;
c.fill = GridBagConstraints.BOTH;
c.insets = new Insets(5,5,5,5);
setBackground(Color.yellow);
setSize(600,500);
/* Either get the IP address from the HTTP server if
we're an applet, or from the commandline (if passed).
if (isapplet) {
try{
reader_ip = InetAddress.getByName(getCodeBase().getHost());
catch (UnknownHostException e){}
else {
reader_ip = arg_ip;
if (arg_port != 0) {
port = arg_port;
/* Open a socket to the Device Server's serial port
if (reader_ip != null) {
if (gtp == null) {
gtp = new tcpip(reader_ip, port);
if (gtp.s == null) {
st += "Connection FAILED! ";
gtp = null;
if (gtp == null) {
st += "Not Connected";
add((new Label(st)), c);
return;
st += "Connected";
add((new Label(st)), c);
/* You may now perform IO with the Device Server via
* gtp.send(byte[] data_out);
* byte[] data_in = gtp.receive();
* functions.
* In our example we'll use two TextBoxes which have
* been extended to handle IO to the Device Server.
*Data typed in the upper text box will be sent to
* the Device Server, and data received will be
*displayed in the lower text box.
/* Start of custom application code */
/* ADD YOUR CODE HERE */
c.gridx = 0; c.gridy = 2; c.gridwidth = 3; c.gridheight =
1;
c.anchor = GridBagConstraints.WEST;
add((new Text_io(gtp)), c);
/* End of custom application code */
public void destroy()
if (gtp != null)
gtp.disconnect();
gtp = null;
public void stop() {
public static void main(String[] args) {
Frame frame = new Frame("TCP/IP Test");
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
if (args.length > 0) {
try{
arg_ip = InetAddress.getByName(args[0]);
catch (UnknownHostException e){}
if (args.length > 1) {
try {
arg_port = Integer.valueOf(args[1]).intValue();
catch (NumberFormatException e) {}
Test ap = new Test();
frame.add(ap);
ap.init();
isapplet = false;
ap.start();
frame.pack();
frame.show();

Let's see a decent try by you towards a solution first. I've found that usually the more thought and effort posters put into creating and solving their questions, the better their chances are of a volunteer here taking the time and effort to consider it and give a helpful answer. In other words, show that you are putting effort into doing your own homework first.
Also, when posting your code, please use code tags so that your code will retain its formatting and be readable. To do this, you will need to paste already formatted code into the forum, highlight this code, and then press the "code" button at the top of the forum Message editor prior to posting the message. You may want to click on the Preview tab to make sure that your code is formatted correctly. Another way is to place the tag [code] at the top of your block of code and the tag [/code] at the bottom, like so:
[code]
// your code block goes here.
// note the differences between the tag at the top vs the bottom.
[/code]or
{code}
// your code block goes here.
// note here that the tags are the same.
{code}good luck

Somebody Please Reccomend a laptop for me?

i'm a new user to the mac world.
I'm an experienced film editor and i want a top of the line laptop that won't freeze or crash and have enough room for me to edit video.
which laptop can handle final cut pro?
which laptop is affordable and will give me more bang for less money?
please help?

...new user to the mac...film editor...
I was in the same situaton last September.
I am enjoying my 17" MacBookPRO, matte screen, faster hard drive option, 2GB memory. Go ahead and purchase Apple's memory at the time of purchase.
...top of the line laptop that won't freeze or crash and have enough room for me to edit video...
External hard drives for storage of your projects are very affordable. Tae advatage of your MacBookPRO's Firewire capabilities with one!
...which laptop is affordable and will give me more bang for less money?
Do you scrimp on, say, your lenses? Or recording media? Of course not. ou - and your clients - deserve a quality product. Don't have "regrets" later - get the best NOW, and start enjoying it!
Clint Bradford

Please give me advice for my icloud situation.

My nam is Luan, I am from Vietnam
In November 2013, my dad - who is quite old - bought an iphone 5 in a mobile store located in district 10, Ho Chi Minh city. At that time, the shop's owner signed his Apple ID to this iphone. My dad, at that time, still did not know much about icloud. So he let the shop's owner sign in with the thought that if anything could happen, he just claimed the shop for this.
And the problem is, one week ago, we had to restore our phone for some reasons. After that, we have been locked by icloud security. We came back to the shop and asked them which ID Apple they had used to sign in. They gave me about 3,4 accounts and told us that they did not remember which was the exact one. Then I tried them all and one account worked, but Apple told us that this account have been deativated for security. I came back to the shop again and asked them for the e-mail and password they used to create this Apple ID. And once again, they told us that e-mail has been hacked.
My dad and me were too upset. We love Apple so much but lacking of supplemental knowledge ruins this beautiful mobile phone. I wonder if somebody and Apple could help me to unlock icloud.
We are so grateful for that. Thank you very much.
Luan Nguyen

Have the shop owner contact the Apple account security team to try to get the ID enabled again, by calling the number for your country listed here: http://support.apple.com/kb/HT5699. Or have the owner contact iTunes store support for assistance enabling the ID by send them an email here: https://ssl.apple.com/emea/support/itunes/contact.html.
If the shop owner cannot fix this for you, you should return the phone for a refund. They should not have sold you a phone that was linked to their Apple ID.

Could somebody please give me a quick break down...

Hi there guys,
i'm new to Flash so apologies but i am a seasoned user of
photoshop, illustrator and indesign so i'm not completely inept at
Adobe packages.
Anyway i really want to learn Flash and have been dabbling a
little, i've found a site that works similar to the way i envision
my new site to look, i'm not going to rip it off, just taking
inspiration from it.
Could anyone please break down how they'd go about creating
the fold out square effect that is on
Periscope.
I've tried using the 3-d rotation tool to flip the squares
over but there must be a simpler way instead of repeating that over
and over? if anyone could please help it would be very much
appreciated. Breaking it down as simple as possible would be a
great help.
Thanks

Thanks for replying. i've tried doing it with one square as a
movie clip symbol and then flipping that square over with the 3d
rotation tool and then over and over. but i'm having to draw other
squares on other layers to make up the rest of the square as it
gets created. is this the right way to do it? what would be the
simplest way? i know you said its just an animation, but how would
you create the animation?
Thanks

Moving itunes to a new pc, can somebody please give me the simple?

just purchased a new laptop, went from XP to 7. I have read multiple postings and am comp literate, but I cannot get anything I purchased from itunes over to the new laptop. The titles, art and info go over, but I keep getting "original not found...." when I try to play the song. I can't be the first to go thru this, so if someone can give me the simple explanation I am missing it would be much appreciated.

I am an iTunes novice myself so I won't be able to help you fully but I do know that somewhere in the iTunes app there is an option for you to "authorise" your notebook as a second valid access point to your account. You can still only sync from one computer or so I am told and I am not sure how to go about executing a complete move but I suspect loading iTunes onto the notebook and authorising the notebook might be a good place to start. I think I would then use a stick to copy all the itunes files over to the new machine just to make sure they are both the same. Take a look at the old machine to see how the directory structure and file placement system is laid out and mimic that. You may need to "import" the new directory (folder) even still. Perhaps then you would "de-authorize" the other machine but I'm not sure. I'm sure someone will have better info on the second half of the operation.

HT4060 My I pad 2 is not charging throuh USB Power Adapter but it is chrging from computer through USB (with sign of no charging). Would you please give any solution for that?

I have facing problem of charging my I pad through USB power adapter. It is not giving any response when connected to power adapter. When it is connected with USB port of computer it is charging with sign of "not charging" and it takes long time to cahrge. please help me to sove my problem.

I have no idea why the iPad would not be charging with another power adapter but will charge thought the USB port on your computer. Try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
If that doesn't help, I think that the next thing that I would try would be to reset all settings. Settings>General>Reset>Reset all settings. If you do this, all device settings will have to be re-entered and tha does take some time to do.

Please can somebody please give me some sound advice!

Hi There,
I hope that I've posted this in the correct forum? apologies if I haven't.
I was hoping to get some advice from you guy's/girls please, I would like a change in career and over the last
year have been teaching myself Microsoft Office Suite (only completed Word Fully) and now exploring Excel (which has so much more to it than I originally thought, I was so naive), I was hoping to get a starting position on a help desk that deals with queries
within the office suite and hopefully one day build up to qualifying as a Microsoft Office Expert.
So I found a online training company who would do the starting qualifications (Microsoft Office Specialist)
for £200, quite reasonable i thought although the exams would be £80 each, again not too bad.
The person I spoke to though told me that it wasn't necessary to take the exams as I could put on my CV that
I have completed training with this company. and that employers would do a skill set anyway. To be fair I thought that a little strange but as I'm just starting out who am I?
Anyway I done a little research by calling a employment agency that deals with IT positions and was advised
that maybe I needed to get an MCSE first as that might be able to get me started as they haven't come across Microsoft Office Specialist Roles.. but this is I feel going in a completely different direction.
So I looked online and the only Microsoft Office Specialist positions that I came across is ones that included
knowing Active Directory DS?
I only wish that there was a company that would take on people who trained on the job..
Please help!

The training company is right in that if you take the training you can add it to your CV. If you get the certification you can also add it to your CV. Both things will be looked at favourably by potential employers. But the training company is also right
when they say that neither will be enough: the employers will want to assess your skills themselves anyway. This doesn't mean that it is useless to get certified. It will help to get your CV "up" in the stack of CVs, so that your chances of getting
to the interview stage (rather than being discarded right away) will increase. It is up to you to demonstrate your value during the interview, but first you need to reach that stage.
The employment agency is also partially right in that a MOS certification may not be enough if you are looking for a Help Desk position. This type of position typically also requires knowledge of the operating systems and the supporting network infrastructure,
and even the computer hardware, so additional certifications would be needed to prove this knowledge. Once again, you don't require the certification as an absolute requirement; if you have the knowledge, you can state so in your CV and the employer will evaluate
you. But having the certification can help distinguish your CV over others that don't have it.

Somebody, Please give me "medicine" for my phone.....

Similar Messages

Maybe you are looking for