Somehow my sound settings have changed somehow

Was hoping someone can help me on my iPad. I get nothing out of the internal speaker and the volume control when pressed says headphones.

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • Keys and settings have changed on my wireless keyboard

    I use the apple wireless with my iPad 2, and somehow the language settings have changed and keys have changed placed. How do I fix this?

    Thanks,
    I thought I had done this earlier, but when I tried again (a well as purposefully selecting a different language, then back to Norwegian) it seemed to work.
    Good stuff. Thanks again
    - Lars-Christian

  • Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

    Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

    This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
    Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
    Does that work?

  • Since the latest software update, every third or so time I turn it on, my sounds settings are changed and I cannot listen to anything-music, YouTube, nothing. I can sometimes change something and it will work, but right now nothing is working. Anyone else

    Since latest software update, my sound settings are changing sometimes when I turn on and cannot hear anything. All controls are useless and cannot be activated. After changing several things, I have been able to make it work, but today nothing is working. Anyone else experience this  and have any ideas?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

    I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

    The iOS settings for the iPhone 3 never had an option to determine how long you wanted to save messages. That settings is new to iOS8. As far as some being deleted, there is nothing about the phone that should delete messages without some user intervention. Try a reset on the phone, this will not affect your data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.

  • My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard).  I have no idea what settings have changed or what to check.  Any ideas?!

    It could be a number of keyboard shortcuts, here's a few.
    If the screen is zoomed,  hold CNTL and scroll down with mouse or trackpad.
    If screen looks like a negative,  hold down CNTL OPT CMD and click 8.
    Let us know how what other symptoms are shown.
    Regards,
    Captfred

  • TS3276 I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

    I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.

    Open System Preferences > Sound > Sound Effects
    Select:  Play user interface sound effects
    And make sure the Mute box is not selected.
    Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
    Make a selection from the:  New messages sound  pop up menu.

  • I am having trouble connecting to my wireless internet. I keep getting message that my network configuration settings have changed. Ive been advised that i need to change settings to look for dynamic ip address ?

    I am having trouble connecting to my wireless internet and am getting the message that my network configuration settings have changed. I have reported it to my provider who advised that they think the Mac is looking for a fixed IP address and they use dynamic addresses. I have had the Mac for months and have not had this problem before. I would appreciate any help please on how to fix this ?

    Then I get a separate pop up that says: Secure Connection Failed. aus3.mozilla:443 uses an invalid security certificate.
    The certificate is only valid for the following names: securelogin.arubanetworks.com, www.securelogin.arubanetworks.com
    (Error code: ssl_error_cert_domain)
    This could be a problem with the server's configuration or it could be someone trying to impersonate the server.
    If you have connected to this server successfully in the past the error may be temporary and you can try again later.
    I have tried many many times!

  • My sequence settings have changed - inexplicably

    I have loaded up a project i was working on yesterday and i can't understand why but my sequence settings appear to have changed from what they were initially set to.
    They should be and were:
    Frame size: HD 1440 x 1080 (16:9)
    Pixel Aspect Ratio: HD (1440x1080)
    Field Dominance: Upper (Odd)
    Compressor: DVCPRO HD 1080i50.
    Now they are:
    Frame size: 720x576 CCIR 601 / DV PAL (5:4)
    Pixel Aspect Ratio: PAL - CCIR 601 (720x576)
    Field Dominance: Lower (Even)
    Compressor: DV - PAL
    So now in effect I have HD footage on an SD anamorphic timeline. When I change the settings to the correct ones, it stretches and shrinks the footage.
    How do I correct this without having to recut the whole thing?
    Thanks
    Jeremy

    Zak Ray wrote:
    Reset the settings to what they should be. Then go to a single clip, and reset it's Basic Motion and Distortion in the Motion tab of the Viewer. Copy this clip, select all of your other clips, right-click, choose "Paste Attributes", and check Basic Motion and Distort.
    An even faster way to do it: select all in the timeline, then command option v. Then tick the Distot and Basic Motion checkmarks and press OK.
    Note that any changes you've made in Basic Motion and Distort on your clips already will be lost (i.e. a "Ken Burns" pan/zoom on a shot or image).
    Correct. Also for the workflow I sugested
    Not sure if there's a way to do it without losing that information, maybe someone else will pipe up.
    No. that is not possible. Both methods will reset all those information and you'll need to redo them.
    Rienk

  • Settings have changed

    About a week ago I noticed that my display was acting weird and changing the settings at a random rate. Recently I found out that the setting had been changed. So, I started to check around and found that the loggin items had all been deleted and that other settings had changed.
    Now I am finding that I can't access some web pages that I have been visiting for a long time. I reset the Safari settings to no avail.
    What the heck am I doing wrong here.

    No, no changes in the name of the home folder.

  • My settings have changed without my permission , how i can rest these ?

    ''Hello I am using 3.6 mozilla firefox on my laptop. I recently noticed that the layout on the page has changed from its former settings & I have no knowledge has to how to restore it to its former arrangement. I do not know why this happened. The changes are noted as ....when I click on a link I no longer have the URL address as the the address bar that was at the top of the page has gone. Also I used to have a " back & forwards" arrows which I used to go back ....this is now gone & instead I have to select the history option every time & select back , which is annoying for me. How can I rest my page layout to where ot was formerly ?''

    Sounds like you have the Menu Bar (File, Edit, View, History, Bookmarks, Tools, Help) but just in case you don't, see: <br/>
    http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    Navigation Toolbar (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Either click View > Toolbars, click on "Navigation Toolbar" to place a check mark OR right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: <br />
    https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
    http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
    http://kb.mozillazine.org/Toolbar_customization
    http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
    Bookmarks Toolbar: Same procedure as Navigation Bar except click "Bookmarks Toolbar".
    You could be in Full Screen Mode if you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See:<br />
    http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars

  • TS4002 Can you tell me if the smtp settings have changed recently?  I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working.  Error message is: Authentication failed because Outlook doesn't support any of the

    I am able to receive messages on my IMac using Outlook but am unable to send.  I've had no trouble in the past but began receiving the following messages today.
    5.7.8 Bad username or password (Authentication failed).
    Authentication failed because Outlook doesn't support any of the available authentication methods.
    I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues.  Any advice?

    Here are the correct settings. They have never changed since iCloud debuted a year ago.
    Server information
    IMAP (Incoming Mail Server) information:
    Server name: imap.mail.me.com
    SSL Required: Yes
    Port: 993
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    SMTP (outgoing mail server) information:
    Server name: smtp.mail.me.com
    SSL Required: Yes
    Port: 587
    SMTP Authentication Required: Yes
    Username: [email protected] (use your @me.com address from your iCloud account)
    Password: Your iCloud password
    Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud. 

  • Syncing iphone: Itunes says settings have changed, asks if i want to apply these changes, but no changes have been made?

    Itunes 11.3, but this has happened for quite a while, several versions at least. Iphone 5, Ipad 2, this happens with both devices. I sync locally to my macbook pro (late 2011 version, running 10.9.4), using a wired connection.
    I will have the 2 devices hooked up via the factory supplied cords. Doesn't actually matter if it's both or just one device. If I have, for instance, the iphone selected via the sidebar, and am displaying the Summary tab, normally you have a sync button to the lower right. Quite often, this will randomly change to two buttons, - Apply, Don't apply, as if I have made settings changes or something, although I haven't. No changes have been made. If I select a different device in the sidebar of itunes, a pop up will open asking me if I want to apply the changes? I say no, all is good. BUT - it's annoying!
    Is there any way to make this stop?

    No-one? Am I the only one? I doubt it...

  • Seq settings have changed!

    Working in FCP 6. We have 6 different projects. Clips are in apple pro res HQ. Project seqs are 1080x1920 which matches clips, but for some reason one of the project timelines has ended up with settings different to these. Its now 1080x1440 and when I change it back in the seq settings it pilar boxes the video. I dont want to recut from scratch so is there a way I can retain the current cut while correcting the seq settings?

    +Talked to apple tech support, they sent me here.+
    That's not amusing! neither it is reassuring for those who thought that Apple support is
    the most reliable source of technical advice for users.
    The service provided by this forum appears clearly faster and more efficient besides being totally free ...
    Well!...Anyhow!
    Was your original format HDV?
    Your problem might have something to do with altered pixel ratio have you checked that too?
    I pass the relay to the next fellow!
    G

  • Gmail stopped working on my iphone but no account settings have changed

    My gmail account has been set up in the "mail" client on my phone for over a year, and then suddenly stopped working two days ago. I get an error that says "The mail server 'imap.gmail.com' is not responding. Verify that you have entered the correct account info in Mail settings" but I  haven't changed my password or settings...I have gone back in and re-entered the password (which it accepts when I enter it) and turned on other SMPT servers, and restarted my phone - nothing is working. Any ideas?

    Yes, this is a known problem.  Google is working on a fix.
    Here's an article documenting it: http://www.macrumors.com/2012/08/10/some-experiencing-issues-with-gmail-on-ios-d evices-google-working-on-fix/

Maybe you are looking for

  • Unable to generate picking output

    Hi I am working on ECC6.0 and trying to do picking output from VL02n before doing a PGI. can anyone tell me what config is required to generate a picking list output before doing the PGI? I tried with EK00 output type but somehow it is not working as

  • Safari 3.0.4 quit unexpectedly Thread 0 crash

    Updated software to 10.4.11 and Safari 3.0.4, and now I get a "Safari quit unexpectedly" error every time I launch. It quits every time on launch. I am currently using a saved copy of 2.0.4 that opens without a problem. Here is the Crash Log if anyon

  • I am unable to create a new Citadel database

    I am using DSC module 8.5 and am trying to create a new database using MAX.  I am following the instructions, but when I select "Finish" to create the database, the progress meter pops up and stays at 0%.  I should add that there was not a default da

  • Problems with Acer VGA/RJ45 adapter

    Hi All,  I am new to this community. I have had an Acer Asire V5-571P for a year or so now and am frustrated by the internet connection port. The laptop came with an adaptor which has a VGA and a Cat5 connector. This has worked fine for most of the t

  • Internal Order settlement "Acquisition value negative"

      Hello, Internal Orders Settlement Process (TRX KO8G) Received the message "Acquisition Value negative in area 01" for I/O # 850100 & 861650 when attempting to run the February 2014 Settlement. What went wrong? How can I resolve this issue?