Someone enabled/started the "Console" program on my G4 running OS 10.5.  My understanding is that Console tracks usage logs.  Can it track IM's through Yahoo?

I noticed yesterday that Console has ben enabled/started on my IMac G4 running OS 10.5.  My understanding in doing research this morning is that Console is used to track usage logs......my question is does/can it track actual IM's through Yahoo?  Or just indicate that a conversation took place? Or something less than that?

It always runs in the background, but you will see it only when you invoke it throughUser>Applications>Utilities>Console.  You may have clicked on it by mistake.  Just close it and remove it from the Dock, doing that won't hurt anything.

Similar Messages

  • Terminal Service - enable the "Start the following program at logon" cause my remote printer won't redirected?

    After I enable the "Start the following program at logon" on my User account windows 2003 Server R2 cause my remote printer won't redirected when the Remote User is logon to the Server, I don't know why? I checked the Terminal Services Configuration already
    and everything is fine.
    And for you information, If I disable the "Start the following program at logon", the printer is redirected again, did I miss something in here?
    Thanks
    dkirwan

    Hi,
    I suspect that this application conflicts with Terminal printer redirection, whether all applications using "Start the following program at logon" option have this
    issue or not. You may try another application to see if the issue is gone.
    If your client PC is Windows XP, you may need install the Remote Desktop Connection 7.
    http://support.microsoft.com/kb/969084/en-us
    Technology changes life……

  • Error 8 when starting the extraction program

    HI all
    I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
    Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
    Regards
    alex

    Alex,
    Check the following OSS notes
    947690
    511475
    23538
    Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
    Abdul

  • Error 8 when starting the extraction program (BI7.x)

    I am receiving the following message when loading from the ODS to the data targets:
    Error 8 when starting the extraction program
    Message no. R3019
    Diagnosis
    Error 8 occurred when starting the data extraction program.
    System response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or create a problem message of your own.
    I have searched the forums and OSS, and can't find anything that matches my situation exactly.  I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system.  I restored the BIP client and all transfer structures were reactivated.  Now when I try to load, I get this error 8.  Has anyone experienced this issue?
    Thanks,
    Pam

    Josko,
    I am also using BI 7.x and had the problem loading from DSO to Infocube.  What are the entries in table ROIDCPRMS?  What is the host name displayed when you run transaction SM51 in the BI system?
    Pam

  • Error 4 when starting the extraction program

    Hello Gurus,
    Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
    Please find the error message bello.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    An error occurred in Service API .
    Check the error message.
    Procedure
    The procedure for removing errors takes place depending on
    the error message:
    Note
    If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
    Thanks,
    Muddu Reddy.

    Hi sekhar,
    You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
    Tell me if you still face some problem.
    Thanks
    Ram

  • Could someone please recommend the best program to convert AVI and MPEG files for use (and exporting) into IMovie 11?

    Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice?  Thanks!

    Hi Susan,
    It is no simpler converting vobs to mp4 than mpg (mpeg2).
    There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
    So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
    Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
    Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
    If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
    Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
    Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
    You may need variations of these commands depending on encoding of vob.
    Note: -i means -input-file; -sameq means -same-quality, as much as possible.
    ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
    Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
    Do keep us posted please .
    Cheers,
    Rob

  • Start the following program on RDP session goes to desktop

    I had a single user doing this:
    When setting the start the following program in a RDP client Connection, he goes to Desktop and don’t start anything.
    With all other users, include the domain administrator he starts well. And more…
    I clone the user in AD, and with the new user everything is OK. 

    Hi Xelah,
    According to the description , the first thing came into my mind is group policy .
    Because there is an user configuration when you use "start the following program in a RDP connection" :
    https://technet.microsoft.com/en-us/library/cc770821.aspx
    I would suggest you to move that user to a new OU then configure a new gp and link to the new OS to check the result .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • I got the MSCVR80.ddl message after I tried to do the latest update on Itunes.  I went in and deleted all the related programs and reinstalled, but I keep getting a message during installation that "Service 'Apple Mobile Device' failed to start. Help!

    I was trying to do the latest update on my desktop for my Itunes.  I got MSVCR80.dll is missing.  I saw a post about deleting all the apple itunes programs, restarting and reinstalling.  I tried that.  As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services.  I did a retry, got the same message, then hit ignore.  It went on.  Then a message popped up saying "Itunes not installed correctly"  Error 7 (Windows error 126)
    Now my Itunes program will not open at all.  What gives?  This is very frustrating and I am not very computer literate to begin with.

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • HT3231 Starting the opening program over?

    I migrated with Migration Assistant from an old to new Macbook Pro. NONE of my files OF ANY KIND were migrated. So, far this assistant fails miserably the usefulness test. The question is how can I start over? Now, I plan to migrate from a Ime Machine, if that works. What ever happened to the old firewire/old laptop-is-a-hard drive routine?.

    swic17 wrote:
    What ever happened to the old firewire/old laptop-is-a-hard drive routine?.
    This happened:
    <http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1443.html>

  • I sometimes lose my signal when calling/texting someone. Is the case program from Apple still active or do I have to spend $30 on one?

    So I sometimes get the "No signal" text when texting or receiving a call or calling someone. I knew that Apple gave free cases before, but don't anymore. Will they make an exception for me? I really don't feel like spending $30 on a case when I spent $700 on an iPhone. Oh, and I live in Sweden, by the way. If that'll change anything.
    What to do? :S

    Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!

  • My computer just started asking what program to use to run firefox. what happened and how do I fix? Thanks

    I just installed Firefox a few days ago and has been really good. Today my computer will not open Firefox, it keeps wanting to know what program to open in.
    what do I do to fix this?
    Thanks

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    *http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Why do I have such a hard time when I connect to facebook games it doesn't want to start the game it sending me a message about apps...what does that mean?

    why do I have such a hard time when I connect to facebook games... firefox doesn't want to open the game the message is sending that their something with the apps..what does that mean?....what is plugin...what do I do for that?

    The usual explanation is that it is a licensing issue. It's not Apple refusing to support an MS product (they support loads of others, like QuickLook for Office docs). MS won't let Apple have it. (The Linux-based solutions are third-party reverse engineered.)
    That having been said, I've never had a problem plugging an NTFS drive and reading files from it. Why does it take you an hour?
    I've never had a problem with a Mac-formatted USB thumb drive not writing either. It's possible that the hardware/software that Apple uses is more sensitive to cheaper thumb drives, but I'm guessing here.

  • I want to put a dns in my iphone. the one i want is cached in my ipad . how do i find that in my ipadso i can ues ie on my phone

    I want to put my friends dns in my iphone from my ipad how do I find them in my ipad

    You can see the DNS server being used in Settings > WiFi. Touch the "i" to the right of the network name and look at the DNS section.

  • I need to install the windows version of firefox and run it under wine to see how a page looks but I can only seem to download the linux version

    I keep trying to download the windows version of firefox so I can run it under wine on linux but all I can find is the linux version because the web site automatically detects the os. Any ideas on how I could do this?

    Download from here: <br />
    http://www.mozilla.com/en-US/firefox/all.html

  • I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

    I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

    Hi 49balf,
    Thanks for visiting Apple Support Communities.
    I recommend removing and reinstalling iTunes using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best,
    Jeremy

Maybe you are looking for

  • Objects on Java Engine or Abap Engine. Pls sugget

    Hi All, Pls let me know: 1. Mapping Runtime, SLD, Adapters (except IDOC and HTTP sender) run on Java Engine? 2. BPE and IE are on Abap Engine? 3. CPA_cache refreshes objects of IR and ID present in    Java Engine? 4, SXI_CACHE refreshes objects of IR

  • Iphoto quits unexpectedly at start up?

    My mac is brand new and iphoto wont open. It tells me it "Iphoto quites unexpectedly". Iphoto and my computer are both completely up to date. When I got the computer last month it let me use iphoto but now 5 weeks later it wont open. I've sent a repo

  • Performance Tuning for OBIEE Reports

    Hi Experts, I had a requirement for which i have to end up building a snowflakt model in Physical layer i.e. One Dimension table with Three snowflake tables(Materialized views). The key point is the Dimension table is used in most of the OOTB reports

  • Please help me with ABAP code

    Hi Gurus, Please help me with the code. Algorithm: This is for master data extraction. I need to append some records to I_T_DATA before the loop on I_T_DATA begins. ZTAB is a custom defined table with key KEY. STAB is standard table with key KEY. 1.

  • DW8 Bindings Panel not showing recordsets

    G'day, I have a number of sites configured, with many pages using recordsets. For some reason DW8 is no longer showing the recordsets in the bindings panel. This is true for pages that were created in DW8 and still in their original code state and fo