Someone in NOKIA confirm N80 time/date setting nee...

Please suggest vwhat to do
Many forum vistors suggest its a secondary power back up problem
OK But I start experence after 4.07 update and this continues after the latest 5.0
So please suggest Karrem are u listening
N80 V5.0719.0.2 24-05-2007 RM-92 Nokia N80 (12)

Hi,
the boards here are for user-to-user support only, and aren't the place for getting a response from Nokia. The moderators are only here to moderate, so aren't able to help with these kind of questions. If you want help from Nokia, you should use the 'Contact us' link at the top of the page to contact your local Nokia team.
You might also want to read over the Discussion Board Guidelines which is something everyone should read before posting on the boards. It explains this and other things.
Board Mod Team
READ THIS FIRST!
Click here if you want help from Nokia

Similar Messages

Nokia 6030 lose time/date settings

Hy , i've a question about time/date setting lost every time i need to remove the battery to replace SIM card on a nokia 6030 (new just purchased).
I think this is a problem of the phone because i've another 6230i that do the same thing ,but only after 3-4 years of correct work(and never lost time/date setting until now) .
There is anyone that can confirm me if this is a phone bug (as i believe) ?

I received one comment that say : it's a phone problem , and two others comments that say: no, it's normal for a phone without a backup battery .....anyone has a comment on this ? (for me it's not so clear).
There is any document or manual of this phone that explain this ?
All of the phone manuals that i've seen do not show if there is a battery backup or not installed.

Eror in automatic time & date setting

Suddenly the automatic time & date function in System Preferences is returning an incorrect time. I am shown in the correct time zone (EDT), but using the automatic setting puts the time ahead by 4 hours. I believe that would be GMT. Cannot figure out why it would do this. I am using an early-2008 MacBook Pro running Mac OS 10.8.2.
Intrerestingly, my iPhone 4S running iOS 6 is showing the correct time.
Anyone else experiencing this, or have any ideas how do return to the correct time?

see if this link helps http://www.apple.com/support/ical/

Apple TV.2: Time & Date Set Up Errors

Hi, I bought the newest version of the Apple TV in Panama and took it with me to Venezuela. Every time I try to "hook it up", it never adjusts the time and date setting and simply says "Activating" until it goes to sleep. I've had it for a long time now and I haven't had the chance of using it. Other methods online talk about turning off Firewall, or just letting it sit there until it adjusts but I can't do "let it sit" because it will go to sleep. Hoping for your reply/hint. Thank you.

I have an Isignia HDTV and my Apple TV (generation 2) does the same thing. Whenever it is asleep and I tell it to wake up it turns on. But there is no input signal at all. The only way I am able to get the signal through is to unplug the Apple TV power cord and plug it back in.
EDIT: I found out how to wake up the ATV2!! Make sure your tv (vizio, sony, insiginia etc.) is turned on to the correct input. Then turn on AppleTV if the screen is still blank using the ATV2 remote hold the MENU and PLAY/PAUSE button at the same time and the ATV2 should wake up. Just figured this out.
Message was edited by: Erik12C

Missing Time & Date setting access

I'm using Snow Leopard on a MacBook Pro. Somehow my System Preference dialog/tool to set the time and date disappeared from every possible access point. So I was going to upgrade to Lion and fix the problem at the same time. But can't sign in to the App Store as it requires a check on the time and date. I was travelling last month and my system is still set at GMT, four hours later than my EST. So sign in dialog doesn't work and nothing with download.

I am using a Panasonic HDC TM 300.
I have tried copying the individual .mts files and copying the entire folder structur. Neither of these show the EXIF info in the PPro cs 4 metadata (EXIF section).
As I said the date/time info etc shows up in Adobe Bridge.
Am I missing something or is this a problem with PPro cs 4??
Kaybee

XML data sets in FC

wouldn't it be great if you could import xml data into design time data sets or the ability to use a single data list for multiple components..

Hi,
You have a typing error on the script tag
<script type="text/javacscript"> should be <script
type="text/javascript">
You have there an additional c letter :)
Diana

Time/Date/Usage Stats Wonkiness?

Hey, who says battery life is subpar? I'm showing 750 hours/31 days Usage!
This "seems" to be related to the time/date errors that show up periodically. Not sure if it is related to syncing - I tend to leave iPhone on the "manual" time date setting and mil time hoping it will stick but apparently the phone will revert to automatic? Not sure on that but in any event what's the deal?

Wow! and I thought mine had good battery life!
The only time when my iPhone showed discrepancies in usage times was when switched it completely off for a couple of hours and powered it back on, usages times all of a sudden were higher then standby times.

I set the clock but when lock the screen backworking to the first time to set

i have a problem whit my clock

Hi Go to Genral Settings Time & date Set Automatically to on Cheers Brian

HT5706 My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help

My Apple TV is frozen on the time and date setting and then it goes to the screen saver I tried changing the batteries on the remote and it still doesn't make a difference someone help...has anyone else had these problems?

Hi i ran into the same problem Ithoght it was the control, i changed the batteries the the control, and stil did not work, in the same connection (network and everything) i installed a new one and it worked perfectly, i can deduct the unit is nit working properly

I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?

Okay, I've sussed it. I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine. I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across. Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended. Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list. Hey presto. Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again. Hurray.

Hp 4630 windows 8, 64-bit - no time/date on fax confirm. sheet on dial-up AND No fax with wi-fi?

Hi. I have a problem with faxing. When I fax using regular phone dial-up, the time/date is not stamped on the confirmation sheet printed out after a fax is completed.
Also, when I switch to wi-fi on xfinity, the fax doesn't recognize it and won't fax.

Hello @fuzzyfb , and welcome to the HP Forums!
I hope you had a good weekend. I understand you are experiencing issues with your fax setup. I would like to assist with that!
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest this HP document on Setting up a New Fax for information on setting up date, time and general settings.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have an A2300 camera and don't know how to use it. How do you set the time/date.

I am a novice at this. I can take pictures, buy can't find them. Does the cd that came with the camera show how to
operate the camera. What is the function key for and how do you use it.
Any help would be appreciated.
Thanks,
Tross.

Hello Tross!
When you take images, provided that you have a memory card inserted, they are saved direct to the card. They can be accessed in camera by going into the Playback menu. There is a CD that has an instruction manual on it that does show you how to use the camera. If you do not have this, you can download the manual here.
The Function/ Set button serves two main functions. One, it displays a small menu where you set the shooting mode and image quality options. Second, all setting that need to be confirmed are done with the Function/ Set button.
Changing the date and time settings
1. Press the Menu button.
3. The Tools Menu appears. Go to Date and Time.
4. Next, operate the date and time screen:
Set the year, month, date, and time.
Change the year, month, and date.
- Set the daylight saving time (one hour is added to the current time).
5. After the settings are completed, press the ) button.
We hope this helps answer your questions and that you enjoy the camera. If you need to contact us immediately, please feel free to contact us through the web site.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I set a custom time & date format in the top bar?

Hello guys,
Very embarassing question, because I've had Apple's for all of my life (starting with the original Apple Macintosh) but I still haven't figured out one thing
How do I set a custom time & date format in the top bar?
When I go to System Preferences > Language & Text > Formats I can set different formats. I have no idea where you will see these, but I know that it's not the top bar where the time and date is being displayed. Because no matter what I enter, the format in the top bar will stay the same. I can only choose things like 24-Hour clock or not, blinking dots and so on in the Time & Date settings from the System Preferences.
Can anyone here point me in the right direction? I see you can even choose to display the week of the year - I'd love to do that!
All help appreciated!
Greetings

Language & Text system preferences, Formats tab, customize dates.
There are also many third party menu item utilities that can. Search Macupdate.com for some.
One search yielded iClock Pro. Although I never used it I would think it allows customization. The link I gave you is to the Macupdate download page for that app. On that same page is a Similar Software section which has other apps that can do the same thing.
One listed is iStat Menus. The primary use for iStat Menus is not for displaying date/time but it does do that. And I know it can do what you want because I use iStat Menus to track temperature sensors n my machine and, like you, I want to customize the menu time/date. So I use it instead of the apple clock. It does have the customization features I think you are looking for.

Can I set up a Content Filter that is Time/Date stamp dependent?

My company would like to add an additional disclaimer text during Holidays where the company is closed. It will say something like: "In observance of the 'XYZ' holiday, our offices will be closing at 3:00 PM on Friday, December........ and will reopen at 8:30 AM Monday.......".
I was wondering if there is a way to set up conditions in an Outgoing content filter to only include that text if the email is sent between certain dates.
This would allow me to set up the filters prior to the holidays and not have to manage them manually.
I tried to do it via Exchange Transport rule, but I can't find a time/date dependent condition for the rules in Exchange.
Thanks,
Rachel

Hi Rachel,
there is no way to archive this directly in content filters, an indirect way would be to use a message filter that adds an additional header (i.e. X-mas: true) during a specific period. For that, message filters provide the 'date' rule, i.e
HolidayHeader:
if ((date > '12/20/2012 13:00:00') and
(date < '12/28/2012 12:00:00'))
insert-header('X-mas', 'TRUE');
You'd then create an outbound content filter matching on this header and inserting the specific footer if the header exists. Or, of course, you could have that action in the message filter already, however in that case you need additional conditions to make sure the rule applies on outbound messages only.
Hope that helps,
Andreas

How do I set an email to send at a specific time/date in the future e.g. tomorrow at 9am. I am on an iMACX using apple's version of windows

how do I set an email to send at a specific time/date in the future e.g. tomorrow at 9am. I am on an iMAC using apple's version of windows

apple don't have a version of windows
only microsoft have windows
as how one automatate windows to send mails at a time
googled it for you
http://www.howtogeek.com/125045/how-to-easily-send-emails-from-the-windows-task- scheduler/
more options in the search
https://www.google.dk/search?client=opera&q=automatically+send+email+in+windows& sourceid=opera&ie=UTF-8&oe=UTF-8

Someone in NOKIA confirm N80 time/date setting nee...

Similar Messages

Maybe you are looking for