Someone knows how to minimize size video-file without lose quality?

I have been trying but I can not find the settings to minimize my video-files in size without lose quality in premier CS3,can someone help me please?.
the file is a mpg exported mpg2 from imagemixer3SE software that comes with the camcorder I have got.
As well I have got problems finding the audio.I explain:when exporting the mpg to premiere the audio is not there, but in other programs as after effects you can see there are audio.I readed somewhere that provbably the programe forgot to import the codec and I have to find the file .nll and import it to premiere but I do not know if this is the right answer.
Please help!!!
Thank you very much,
Asyn

Unfortunately, you have posted into the Premiere forum. This is an older series of programs, prior to the introduction of the Premiere Pro line, with PrPro 1.0.
John has hit on part of your problem - MPEG-2. It is highly compressed to begin with. The best format is, as he suggests, DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio. These files will be larger, but will edit better, and you are not likely to experience any Audio issues.
Then, for Export, you have some choices, but you must remember that comprimising the file size and bit-rate WILL diminish quality. How much, will be a function of the CODEC chosen.
What is your intended delivery, DVD-Video, or something else?
I'll bet that Curt, or Jeff, will move your post to the PrPro sub-forum, so look for it there. You will get many more responses in that forum.
Good luck,
Hunt

Similar Messages

Hello, I would like to know how I can open a file without downloading it? Thank you

Hello, I would like to know how I can open a file without downloading it? Thank you

matrix wrote in message
news:[email protected]..
> I tried that, attached is the vi.
> My actual aim is to allow data to be plotted to the graph 4 24 hours,
> after which, it should clear the chart and start at the beginning
> agin.
> Does this vi do this.
No. The attached is the simplest way of modifying it to do as you want. I've
sped things up a little to make it obvious.
> Will the array be able to keep all the data, is there a way i can do
> it without arrays, i.e. kind of dynamically, and therefore try to save
> memory usage.
You already are. You're making the arrays as you go along so only the memory
needed for the data that's in the plot is in use at any one time. To do it
without storing
arrays at all you'd need to keep retrieving the data from
the XYgraph, adding the new datapoint and writing it back. Messy and I
suspect incredibly inefficient.
You're going to use the memory in any case- a better option would be to
pre-initialise an array and fill it slowly. At the end of each 24 hour block
zap all the data and start again without destroying and recreating the
arrays. Or if you're only doing the 24 hour wipes to save memory, simply
start again at the start of the buffer woithout erasing the previous data
and you always have 24 hours of data to liik at once the system's running.
Do a search for keywords like "pre initialise" or "circular buffer" on
ni.com
[Attachment xy-time_modified.vi, see below]
Attachments:
xy-time_modified.vi ‏51 KB

How to reduce size of image without loss quality

I am website developer design a website http://www.ritikakaur.com/ in wordpress php i am new in photoshop and i want to use some image plz suggest me how can i reduce size of image without loss of image quality.

Which file formats are eligible for your purposes?
non-destructive compression has limits, so you may have to compromise.

How to produce HD video files with best quality/size ratio?

I have used the HC3 for 2 days with iMovie and iDVD on my mac mini.
When i started to import the footage with iMovie, i started to do it manually, moving forward and backward between scenes. This caused iMovie to crash very frequently. I then chose to let iMovie import the footage by itself and everything went fine.
I then easily added the chapters, transfered to iDVD and created a DVD with menus in 1 hour. I am really exited about how fast i was able to create a very nice DVD.
However i am trying to convert the footage from iMovie into a small (100-200 MB) in a 16:9 format but I am getting very big files that are not as sharp as the original or some other examples i saw on the web such as the examples in this page about the Sanyo DMX-HD1:
http://www.akihabaranews.com/review-62-SanyoDMX-HD1%2C+everything+except+for+HD%2C+thedisappointment.html
Would you have any recommendation about the settings to export in quicktime or other format? Which video codec provides the best quality/size ratio? H.264? MPEG4? interlace or not?
~Antheo

I'm not familiar wih HiDef content - look at my hardware specs... I'm based in the early 90ies, way before 1080p etc..
Prof Pixel made some... observations...
http://homepage.mac.com/profpixel/color_bars/colorbars.htm
http://homepage.mac.com/profpixel/iDVDsize.html
most codecs, which are implemented in Quicktime, are between good and excellent; my personal favorit is mp4, but in this case, I prefer the algorithms of http://isquint.org/; it also offers a h264 converter, which, I've read, should be excelllent, a little faster then Apple's and with excellent results...
compression depends very much on content and final output media... I'm afraid, you really need to do some tests on your own....

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE

Questions on how to utilize still/ Video files from 3Gs using iLife 09?

Hi,
Just got back from a trip where I took a bunch of stills and videos using the my 3Gs. I just downloaded them onto my Mac using iPhoto.
1. How do get the video files from iPhoto into iMovie as it seems that iPhoto imported it all.
2. How do I get the images that were taken with Location services turned "ON" to display the location they were taken?
3. Will location mapping also work with iPhone video files?

Maybe someone in the iMovie discussion forum would know some of the specifics from iPhoto to iMovie. I thought I remember seeing a way to import straight from my iMove.
Here is the discussions link
http://discussions.apple.com/category.jspa?categoryID=141

I don't know what I did, but Aperture no longer sees my HD as online, and I can't get my photo versions since the HD is not online. I see it in Finder, but Aperture no longer recognizes it. Does someone know how to fix this?

I don't know what I did, but Aperture no longer sees my HD as online, and I can't get my photo versions since the HD is not online. I see it in Finder and can see the original files and even copy them from Finder, but Aperture no longer recognizes the HD, and when I try to work with the picture, it doesn't let me because it says that the master is in a volume that's offline. Does someone know how to fix this?

Just to clarify:
Does Aperture not see the drive at all (that is, does Aperture also not see the drive in the import and export dialogue) or are only the Master Files disconnected?
If Aperture does not recognize the drive at all, check the permission settings of the drive in the "Get Info" panel and make sure you have read/write access, also the "Ignore ownership on this volumn" checkmark, this should be set.
If correcting the permissions does not help, make sure you have a backup, and then use "Disk Utility" to run a check and to repair the volumn, if necessary.
If Aperture can see the drive on import and export, but only does not see the master image files, then try to reconnect your masters.
Create a smart album or use a Search with the rule: "File status: offline", to select all images that need reconnecting to their masters.
Right click on the first image of the selection.
From the Pop-up window select "Locate referenced Files..."
Now the "Reconnect All" button should appear.
Click it.

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to reduce size pdf file with 10.5.8

How to reduce size pdf file with 10.5.8, I know it can be done with snow....

Look at this link.
https://discussions.apple.com/thread/1292868?start=0&tstart=0
 Cheers, Tom

Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

Hi,
I have two ISE-3315 Appliances in production network.
I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
And then I would like to know how to keep the license files and Certificate during the Upgrade.
Please help me to answer my questions.
Thanks
CSCO11872447

The Cisco Identity Services Engine (ISE) provides distributed deployment of runtime services with centralized configuration and management. Multiple nodes can be deployed together in a distributed fashion to support failover.
If you register a secondary Monitoring ISE node, it is recommended that you first back up the primary Monitoring ISE node and then restore the data to the new secondary Monitoring ISE node. This ensures that the history of the primary Monitoring ISE node is in sync with the new secondary node as new changes are replicated.
Please Check the below configuration guide for Secondary ISE- Nodes.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue. However, I do not know how to access the hard drive with either my Windows computer or the Ipad. Does someone know how?

I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue. However, I do not know how to access the hard drive with either my Windows computer or the Ipad. Does someone know how?

On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
Type the name directly into windows explorer.
\\TCname or \\TCIPaddress
If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
Ensure windows is able to at least ping the TC by IP address and name..
Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

HT3775 How to open .MOD video files

I dont have or find any programme to open my video files from my JVC camera (.MOD).
Can .mod be converted to a more common file type or open by any known program for Mac.
//daniel

I don't know how to do all video, but each extension, find a file with that extension, get info, change the "open with," and then click on change all.

My Iphoto doesn't work. Suddenly I lost all my pics. Someone know how to repair it?

My Iphoto doesn't work. Suddenly I lost all my pics.The version is the last one.
Someone know how to repair it?

Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I DONT KNOW HOW TO PLAY THE VIDEO ON MY IPOD

i dont know how to play the video on my ipod when i select it from the menu the song starts playing but there is no video all there is is a little picture in the top right hand corner can someone help please?

the videos of course have to be in the correct format that's why an app like ipod itunes will be helpful in making your videos viewable you can even do the encoding yourself i might suggest checking out this helpful guide http://www.macworld.com/article/48480/2005/12/convertvideo.html once your videos have been converted the videos may appear in the Movies part of your itunes desktop hopefull this helps

How can clients view video file that I upload to my Creative Cloud area?

How can clients view video files that I upload to my Creative Cloud area? Is there a special password that they have to use to gain access?
Thanks for any guidance.
Dave

As a video professional, i agree and am VERY disappointed with this policy. I attended CC presentations at various conventions, film festivals and meetups for a year-and-a-half before I made the leap to CC, and no one EVER mentioned a restriction to transferring video files.
Whether it's to save storage space or not, that's how it APPEARS to the end user. Anybody who knows ANYthing about how video pirates commit their crime (which it most-certainly is), knows that there are plenty of FREE, untraceable (or nearly-anonymous) resources to carry it out. The need for anyone to pay $30 or more per-month to do it with an acct that has their info attached to it is ludicrous! If anything it's CONTRIBUTING to piracy to encourage creatives to transfer their material to collaborative parties using a less-secure, more heavily-trafficked third-party service than the one they're paying for exclusive use for.
Adobe's policy makers need to review this restriction and remove it or provide ANOTHER reason why it exists because this one doesn't fly. And if it continues, make sure a disclaimer gets inserted in CC pitch presentations because likely half of the attendees are working with video.

Someone knows how to minimize size video-file without lose quality?

Similar Messages

Maybe you are looking for