SOMEONE PLEASE HELP! I am desperate..."error with audio configuration"
I have had a flurry of problems that are related in another link, about drives.
I had to complete restore my library and import back each of my songs individually, which was successful. I also needed to install the new iTunes 7.7
However, when I launched iTunes only about a minute later, a message popped up saying that "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." And now, NONE of my songs or videos will play.
PLEASE HELP! I've spent the past 2 days trying to fix a lot of things, and all of them seemed solved until this problem. I'm leaving in 7 HOURS! So please, help is appreciated.
Go into your Control panel, and launch the "Sounds and Audio Devices" control panel. Click on the "Audio" tab.
Is the correct default device showing up in the "Sound Playback" area?
Similar Messages
-
My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.
In the Music tab of iTunes, do you have 'Include Voice Memos' checked?
-
Can Someone please help my itunes says error -9812!! help
does anyone else have the same problem if they do and they have fixed their problem can you tell me what you did please i need to fix this its been like this for like 2 months!
Hi Steph,
This (the -9812 error) was a widespread problem a while back and most people found that re-registering their .dll security certificates did the trick. Apple posted a help page (http://docs.info.apple.com/article.html?artnum=301520) but the Microsoft link no longer works. As such, here are some instructions and a web page reference. Hopefully this will work for you:
To register the DLL files, follow these steps:
1. Click Start, click Run, type regsvr32 softpub.dll in the Open box, and then click OK. When you receive the message that the DllRegisterServer succeeded, click OK.
2. Click Start, click Run, type regsvr32 initpki.dll in the Open box, and then click OK. When you receive the message that the DllRegisterServer succeeded, click OK.
3. Click Start, click Run, type regsvr32 mssip32.dll in the Open box, and then click OK. When you receive the message that the DllRegisterServer succeeded, click OK.
4. Click Start, click Run, type regsvr32 wintrust.dll, click OK, and then click OK when you receive the message that the DllRegisterServer succeeded.
And here's the web page reference:
http://www.technipages.com/article26.html
Best of luck. -
someone please help;;my daughter was playing with her ipod touch,now i cant get on it when i turn it on it is stuck on ios6 i tried everything please help
when i try to get on itunes it says cannot connect because you need to enter password from ipod first.....problem is i cant get past that ios 6 thing to enter passwordPlace the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
when i turn on itunes, it crashes automatically with the error message saying "itunes has encountered a problem and needs to close." I've tried reinstalling itunes but its the same. CAN SOMEONE PLEASE HELP!!!
Try:
iOS: If you can't back up or restore from a backup in iTunes -
i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?
Your headline says iPhone 3GS, but your text says 3G.
iPhone 3G is not compatible with iOS5. 3GS is. -
i have an iPhone 4 that is stuck in a recovery loop. i try to restore it but it comes up with an error code (-1) towards the end of the restore. can someone please help me?
i just baught it off someone.. so im unsure if it was jailbroken or not.. and i dont think its under warranty now.
is there a software or something along those lines that would indicate what peice of hardware is faulty?
i baught it in this recovery loop thinking it was going to be a cheap way of getting a new phone without having to do much.. but now im starting to think its a brick -
hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.
the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore... -
Can Someone please help me with ERROR 4251
I have tried everything! even slowing down the burn speed.
Can someone please help with error 4251 when burning.
I have my diagnostics report done as well.
Thank you to anyone who can help.I did a quick google search for "iTunes error 4251" and this was the first result.
http://forums.techarena.in/motherboard-processor-ram/1215316.htm
The last post in that forum said a few things.
1.Restart computer
2.Disable anti-virus/security programs
3.Update hardware and software drivers.(I'm guessing mainly the cd-rom drive drivers)
Try those things and see if it is still a problem.
~Bill L. -
I have a ipod 1st gen. its frozen and wont back up. comes up with error code 1. can someone please help.
Hi billewen690,
The resource below may help troubleshoot the issue you are having with your iPod touch being unresponsive.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Last Modified: Jan 14, 2015
Hope that helps ...
- Judy -
I am having problem with my iphone 3g update, its showing 1015 error. someone please help me out. Thanks
nomibutt wrote:
... its showing 1015 error.
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
recently i downloaded I.O.S 7 and a few days later it says Activation Error.... This device is not register as part of the iphone developer program. If you are a member of the iphone developer program, please register your device in the iphone developer program portal at developer.apple.com/iphone
im trying to restore my phone but i cant without the newest version of itunes.... and i cannot download the newest version of itunes cause when i try it says error 87....
someone please help me would be greatly appreicatedHi there exiledsoul,
You may find the troubleshooting steps in the article below helpful.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W. -
Haven't been able to use itunes for at least 2 months now. I went to upload a newly downloaded album and now itunes freezes on "determining gapless playback information" every single time! Then i have to hard reset my mac every time as well, which i have done a good 30+ times now. Someone please help me out, it would be much appreciated. i just want to listen to my music again. Apple support is useless and just want money when it's there fault it has happened anyway by applying that useless 'determining' non sense. Please help!
This is the "iTUnes for windows" forum, If your doing this on a mac, you may get better help in the "iTUnes for mac" forums
-
When attempting to start iTunes, I get the following: "The iTunes library file cannot be saved. An unknown error occurred (-50)." Can someone please help me get this fixed?
Same problem here since latest update. As usual poor support from Apple with no answer or fix for this bug.
-
Someone please help a complete beginner with Enterprise Manager!
Question moved from
Someone please help a complete beginner with Enterprise Manager!
Please be gentle with me, I'm absolutely new to all this. We don't have a proper DBA and I've been tasked with the role. There is no-one else in the company with oracle experience and we don't have any support. Until now I've just used enterprise manager to manage the database, but now I have a problem..
We are using Windows Server 2003 and Oracle 10g. I (stupidly) installed some network monitoring software on our server (PRTG network monitor). I almost immediately uninstalled it and all components/registry settings, but it seems to have thrown something out regards the OEM web interface.
We used to access the OEM GUI through http://<hostname>:5500/em, but after installing/uninstalling the network monitor software the OEM webpage would only stay up for a few minutes, before saying 'Internet Explorer cannot display the webpage'. Restarting the DBconsole in services fixed the problem, but again, only for a few minutes.
Spent all day yesterday looking at logfiles (they didn't make much sense to me), but seemed to be saying access was denied to the server ('actively denied it'). Lots of googling led me to believe I needed to reconfigure OEM by dropping and recreating it using:
emctl stop dbconsole
emca -deconfig dbcontrol db
emca -repos recreate
during this process I was asked for various passwords and a port number? I didn't even know what to use as the port number but guessed it was 5500 ?!? (probably wrong). As it didn't work I used the default port number that I found somewhere on the web.
However now I am even deeper in the **** as this didn't work either, (some error about listnener?) and I have now lost the DBConsole in windows services. Obviously the OEM web console doesn't work at all now
I would be eternally grateful for some patient, beginners help here..I can post whatever log files are necessary - I just need to know what I'm supposed to be doing and where to start..
We used to log on to the OEM as 'SYSTEM', but nowhere in the process does it seem to ask me for the password for that (its asked me for SYS and SYSMAN)
It could be that I'm going about this completely wrong, but with only a days experience in all this its pretty hard to know what I'm doing really!
As you can tell I'm in way over my head..I just need OEM web interface to work!
Thanks in advanceok, thanks to helpful comments from other people in my initial thread (posted in general database forum), after rebuilding the console/repository I now have EM up and running. But there are more problems..
Firstly I have an error at the very top of the screen:
java.lang.Exception: Number of responses does not match queries
Also, the 'Host CPU' and 'Active Sessions' are blank and say 'No Data Is Currently Available' beneath them
my emagent.trc file contains this error, repeating with different thread IDs every 30 seconds...
(error = 10061)
2012-04-30 17:19:28 Thread-4376 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://hostname:5500/em/upload/: retStatus=-1
2012-04-30 17:19:59 Thread-1448 WARN http: snmehl_connect: connect failed to (hostname:5500): No connection could be made because the target machine actively refused it.
Help!
Maybe you are looking for
-
My iPod Touch 1G doesn't show up in my iTunes and in My Computer.
My iPod Touch 1G doesn't show up in my iTunes 10.6.3.25 and in My Computer. the iPod can charge when I connect it to the laptop but it doesn't appear in iTunes and My Computer. there's also no "apple.." in my universal bus controllers.I cannot sync,
-
How do I update my Macbook Air 10.6.8 to a newer version?
How do i update my Macbook Air 10.6.8 to a newer version
-
Can I backup my ipad without having the password?
I have an ipad 3. Some time ago the glass broke so I started using my wifes ipad. I finally got around to fixing it but now I don't remember the password (I tried usual suspects, but now I have to wait an hour between each new try). I know how to r
-
Best practice to keep on top of Binding in ADF?
Hello, Today I had to change an adf table in my jsf page because I switched to a different view object and I tought I would be easier for a beginner like me to remove the adf table and add it again with the new binding automatically generated by the
-
Strange output generated after pasting some text into a reply
Posted the following answer just now : http://social.technet.microsoft.com/Forums/en-US/a476247a-47ea-4545-ba26-2ba89595bba3/cannot-create-password-after-installation-windows-server-2012?forum=virtualserver in which I pasted a chunk of text from the