Someone Please help me! Restart issue.

I own a new Macbook and have been using it non stop. It's been a great machine! I still own a ibook G4 1.2 with 30GB HD. I haven't used it in a while. Last week I started it up and it woudln't get past the initial spinwheel. I used the Hardware test to check it out. Everything passed. I restarted it and it wood start up, but then tell me I had to restart it. It oes to a grey screen and tells me o restart everytime I turn it on. I have imortant info on the ibook. I tried using the macbook to get my old files, but the ibook won't show up. Any thoughs? I tried reseting the PRAM to no avail. It only has the stock 26 Ram, could that be the problem? It never gave me any problems beore. Someone please help me.

I tried to o that. I get to the part that says Introduction. You know the first step. When I hit continue nothing happens. The continue button doesn't light up blue or anything. Thanks for your quick response though. Any other thoughts?

Similar Messages

  • PLEASE HELP! Restarting issue with K8N SLI. need bios help???

      Hi people,
    I would really appreciate some help this this problem im having. It’s a bit long winded but ill try to keep it short.
    My pcs spec is as follows –
    MSI K8N SLI (model MS-7185) motherboard
    AMD Athlon X2 64bit 4200+ cpu
    4 x 512mb ram
    Running with a Radeon X700 256mb graphics card.
    Ever since I purchased the machine ive been having problems with the pc loading up XP (or any OS for that matter!). Sometimes it would freeze on the loading screen and sometimes it would freeze on the black screen just after the loading screen.  Sometimes while running windows perfectly normally, a blue screen with writing describing the error came up and then the system restarted, however, I would only ever manage to read the title of the blue screen as the pc restarted so quickly. I remember seeing the word hardware though,  so I guessed it was a serious hardware issue. I lived with this for a few months thinking it might be something im doing that’s making it be so unreliable, such as a software issue, but I recently went on a mission to sort it out. The BIOS of the motherboard was password protected and I wasn’t aware of this until I had lost contact with who I had bought the system off, so I decided to restart the motherboard’s settings by pressing the reset button on the board itself. Next time I booted it up it told me that the defaults were restored etc and continued to boot windows, however now I can hardly get windows to start at all, the system restarts on the loading screen 8 times out of 10, and if it does boot up fully then it doesn’t last long before crashing on me. I messed about with a few of the BIOS settings, but to be honest I have no experience with working with these settings, its all very new to me. I have an idea  that it could be the processor or the graphics card causing the problem, just an inkling though!
    If anyone can help me I would appreciate it greatly. Thank you. Adam
    you can also email me at e-mail - [removed by moderator due security purpose]

    Quote from: Grayone on 23-December-06, 06:36:43
    Can you furnish us some additional info on the 4 sticks of memory that you have?  Also on the power supply?  There is a label on the side of it that lists the manufacturer of the power supply and the amperage output for the 12volt power rail. 
    Thanks for your reply. here is some more info:
    4 x Kingston 512mb model no - KVR400X64 C34
    The power supply is a Sweex Advanced Gold 650W [BA000110]. max currennt on 12v rail is 25A
    Hope this helps. Thanks again for your reply.

  • Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

    hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

    the error is like "Could not load Apple Qmaster preference pane"
    if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

  • When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying

    When I go to my iTunes Store and download something, for some reason it's not letting me download app it's saying there's a billing issue, when I correct it, it's says contact iTunes/ support can someone please help me, I really want too listen to paying

    You need to do as provided - contact iTunes Store support.
    http://www.apple.com/emea/support/itunes/contact.html

  • I was updating my iPad 2 to the latest version, I have never updated before. It was done downloading and was backing up. Error in backing up (-5000). I tried restarting, no help. Someone please help.

    I was updating my iPad 2 to the latest version, I have never updated before. It was done downloading and was backing up. Error in backing up (-5000). I tried restarting, no help. Someone please help.

    Many thanks b Noir
    This is a copy of ONEof the keys  in the registry I changed  as told by Apple support today. I also have changed others as instructed by GEAR  software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others  they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so  I downloaded the software and installed again.
    Sorry, just this minute went to insert image  and it is giving me a message saying this sort of content  is not allowed?.
    The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr  SiRem GEARAspiWDN.
    The GEARsoftware info about manually deleting  GEAR drive is from:
    http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
    I hope you can help

  • I recently uninstalled itunes to fix other computer issues. I was told I was able to reinstall and through my apple account could retrieve all my music.. I just don't know how. Can someone please help me? Thanks

    I recently uninstalled itunes to work on other computer issues. I was told I would be able to reinstall itunes, and through my apple account retrieve all of my music. I just don't know how to do that. Can someone please help me? Thanks!

    okay, I figured it out. But for anyone else with this same issue. Open up your itunes. On the panel, on the left hand side, click downloads. It won't show your old stuff, but on the botttom right hand side, there will be a button you can left click that reads "download previously purchased" and everything shows. You just select all and confirm download. YAY! Glad  I got my music back :-) Hope this helps

  • I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!

    I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • CS6 - I need help installing it on my window 8.1 computer. I have already download both required files, restarted the computer and cannot get them to install. Adobe are the very worst at customer support - cn someone please help. I have already spent seve

    Can someone please help me install CS6 on my computer. I have downloaded both files. I have my serial number

    Hi Rozie,
    Can you please share the error message that you are getting while trying to complete the installation?
    Cheers,
    Kartikay Sharma

  • We'll I restarted my iPod because I was locked out and forgot my password but I didn't mean to erase all the data and now I can't play the games I love since I can't use my old gamecenter account...can someone please help

    Mhm,We'll I have worked 3 months to get a good gamecenter account but it just goes away? Someone please help I'm really annoyed

    I know how to but it doesn't lets go back to my old name it says it was taken

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • My Iphone 5 has gone blank, I can not see anything. Restore with itunes has not worked either. Can someone please help?

    Hi I recently upgraed to iOS 6.1 on my Iphone 5. After the upgrade, it was all good. Over the weekend I went Austria for Ski. While taking the photos, I simply locked the phone and kept it my pocket as I had to go. After sometime when I opened my phone, I could hardly see anything. I tried to unlock with pin and tried restarting with great difficulty. But nothing worked. Coming back home today, I have tried restore the software and still no luck. I have tried restore almost 5 to 6 times, but the screen is still blank. I dont know if what state it is in and I can not do anything to fix it. I am very annoyed with the support service as they can not be reached on Sunday evening.
    I could manage to book a call tomorrow but I have lot of work over next few days at work. Can someone please help how to fix this issue now? Any suggestions will be much apperciated.
    Thanks,
    Srini

    srinifromlondon wrote:
    ...  Any suggestions will be much apperciated...
    Try this Discussion
    https://discussions.apple.com/message/19521062

  • I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

    I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

    Hi troy157,
    I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
    The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
    Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
    If the issues persists, the article below will give you a few more troubleshooting steps:
    iOS: Troubleshooting applications purchased from the App Store
    Try the following steps to resolve your issue, testing the app after each step.
    1. Update your device software
    Update your device to the latest version of iOS.
    2. Check for app updates
    Ensure that your apps are up to date:
    Open the App Store and tap Updates. If updates are available, tap Update All.
    When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
    Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
    4. Restart the application
    If the issue affects only a single app, try closing just that app:
    Press the Home button to return to the Home screen.
    Double-tap the Home button to display recent apps.
    Tap and hold the affected app until the red minus appears.
    Tap the red minus to quit the app.
    Press the Home button, then restart the app.
    5. Restart your device
    Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
    Remove the application from your device and reinstall it.
    Touch and hold any application icon on the Home Screen until the icons start to wiggle.
    Tap the "x" in the corner of the application you want to delete.
    Tap Delete to remove the application and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the application and then download it again.
    Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
    I hope this information helps ....
    Have a great day!
    - Judy

  • (sigh) Can someone please help??? I'm ready to throw in the towel on my SECOND Mic

    So my first Zen Micro froze on me. No amount of tech support could save it. I returned it and received a new replacement. Within days my replacement had begun to freeze, and I would bravely pull out the battery and reboot it. I think (keep your fingers crossed) that I've unstuck whatever that bug was. NOW - my new issue - the dreaded "No license to play - please sync from PC" error. So, reluctantly, I downloaded the 2..05 Beta firmware, which as far as I understood it, resolved this issue specifically. After a successful download and install, I rebooted in hopes that it would be fixed. Well, it's still giving me the error. I cannot for the life of me figure out what I am doing wrong. And I am down to one download on all of my Napster 2 Go songs (due to the same problem on my first Micro). So I have three choices:
    ) Ask all of you what I can to do get this resolved easily.
    2) Delete my entire library, and use my last sync license and load it all onto my Micro again (which is a good hour project)
    3) Gi've up an buy an iPod. I am pulling out my hair in frustration, and I'm telling you... I always felt the same way you all did about Apple and the iPod. But the reality is, NONE of my friends have my harware/software issues. All I ask for is two consecuti've weeks of listening to my MP3 player without license issues, frozen hard dri'ves, reboots, pulling out the battery numerous times, etc. I just want to listen.... turn it off.... and know that it will turn back on again when I want it to.
    Someone please help, and convince me that I should give this one last shot!!

    megasister wrote:
    3) Gi've up an buy an iPod. I am pulling out my hair in frustration, and I'm telling you... I always felt the same way you all did about Apple and the iPod. But the reality is, NONE of my friends have my harware/software issues. All I ask for is two consecuti've weeks of listening to my MP3 player without license issues, frozen hard dri'ves, reboots, pulling out the battery numerous times, etc. I just want to listen.... turn it off.... and know that it will turn back on again when I want it to.
    Someone please help, and convince me that I should give this one last shot!!
    Well, it's perfectly understandable that your iPod-bearing friends don't have issues with N2Go, because they can't use it!
    So I guess you have to determine whether your problems lie with the actual player or the N2Go service.
    Do you have problems playing/synching songs you've ripped yourself or that you've bought from a service other than N2Go?

  • After downloading ios 7.2 my iPad mini seems to have a mind of its own. I'm not sure what to do to fix this problem. Can someone please help me.

    I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If the issue persists...
    Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

    When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server".  Can someone please help me with this?
    TO be precise, it says "licensee server communication problem"
    Thank you

    The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
    Good luck.

Maybe you are looking for

  • Calling XML Publisher report(RDF based) From OAF

    Hi All, I have requirement where i need to call one of the custom XML Publisher report from oaf by passing the parameters. and i dnt want this using concurrent program. I have an idea of calling xml publisher report which is Data Template based(XML).

  • Satellite M30 - DVD Playing Format

    Can any one advise me if there is software available so I can play Video CD / PAL & NTSC on my laptop.. Though, could anyone advise if a change in the settings will automatically allow me to play these types of formats..

  • My phone iPhone 4S doesn't charge

    My iPhone 4S doesn't charge unless I turn it off. I have tried using other cables which hasn't resolved the issue. It has no problem charging to 100% when it's off but it is very inconvenient to have to turn it off to charge the phone.

  • Create PDF Utility for Safari - Documenation and Contents not in Sync

    I downloaded the acrobat_ittools_create_pdf_032613 package. The archive contains the following three files: document.wflow info.plist SafariCreatePDF.pdf The documentation in SafariCreatePDF.pdf assumes that the following files are present: Safari Cr

  • Failure to burn disk

    After burn procedure starts, I get the message "the device drained it's buffer without burn underrun protection" Out of 8 attempts to burn, the 2nd one did work. Am using Philips CD-R. Have never had this problem, having burned many cd's in the past.