SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U
SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U
Please turn off your caps lock.
See http://support.apple.com/kb/HT1212.
Similar Messages
-
HT5699 Hi this is my first time doing this
Hello
This is not a CHAT. You have to post your problem giving all the necessary information and you should get some replies.
-
Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok
Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks! -
I put my ipod on voice control by accident so i typed in my password because I wanted to listern to my music it said it was wrong. So i typed it in over and over again until it said connect to itunes so I did. Then while I was at it I updated it I waited 30 mins and then I couldn't turn it on. When it finally did turn on it still said please connect to itunes. So i restored it and rebooted it everything. And it still says connect to itunes. I go on itunes and it says ipod touch is in restore mode unlock password. Well I can't do that if my ipod is disabled. Please help.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i restored my iphone 3gs to factory settings and now when i turn it on it says to connect it to itunes well i tried that and its not working then i tried to hold the power button for three seconds then the home button for ten seconds but still nothing please help asap
If iTunes doesn't recognize it, do this:
http://www.apple.com/support/ipad/assistant/itunes/ -
how can i fix my phone its a 4s.. disabled.. when i connect to i tunes to restore it wont allow me as it is not a trusted computer. obviously i cant access the phone to allow trust, it picks it up as my own phone but wont restore... please help!!!
Hello feeling dumb
You will need to put your iPhone into recovery mode by following the steps highlighted below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G. -
I really need help, my ipod shows to connect to the WiFi but then it will not let me use the interent it says no connection but according to my screen i have WiFi connection, i am very confused an i would really appriciate it if someone could help me sort out this problem so i can start using my iPod for work again.
Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
I just
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Hi there. Some time ago I began having problems with my internet. When my Mac com pouter is connected to the internet non of my other device ie laptops iPhones and tablets do not see to be able to load the pages on the internet. But when my Mac if of the wiles then every thing works fine any ideas ??
Hi there, thanks for that, i just got back from my provider and they ashured me that its not not from there side, i even took the modem and every thing worked well,
Any one have any ideas??? some one mentioned that he had heard of a similar problem with the mac, and it had some thing to do with the wifi settings. -
When I click install flash I get a blank window with this comment at the top 1 item Zero kb available and flash will not install
https://forums.adobe.com/thread/1195540
-
Message on ipad "Icloud Backup" "This Ipad has not been backed up for two weeks. Backup happens when ipad is plugged in, locked, and connected
to wifi" I did this and message will not go away. ipad is locked and I cannot open. Have found nothing that address this problem. I need help.
ThanksA reset should help. Tap and hold the Home button and the On/Off button at the same time for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons and await restart. No content will be affected.
-
The Issue Is Majorly Caused When Any Effect Is Applied On The Video And Rendered The Issue Occurs. And By Closing The Application And Restarting The Application Its Works Fine Again But As Soon As The Effects Are Applied Same Problem Occurs Recursively.
What is the format of the material you are editing, is it variable frame rate?
-
HT1212 my ipod is disabled and i tryed that but its not working what should i do
plese help me i cant figure this out !!
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode -
Please help
Hi mooraye,
Welcome to the Support Communities!
If you changed your password, you will need to go into the Messages settings on your iPhone and your Mac and enter the new password.
The article below will explain how to link the phone number, which is tied to your Apple ID.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
- Judy -
I want to use maps in jsf?its not working help needed
Hi
i am trying to use map and area in jsf. i added the tablib demo/coponenets but it says <d:map> is unknown tag
do i need to add any jar file for making it work
please guide me
thanks in advance.See [[/questions/923988]]
Maybe you are looking for
-
How can I reallocate sales order stock within sales order?
I have a material that is strategy 50 and produces sales order stock. A customer placed an order for a quantity to be shipped to a single location. So the sales order was set up with a single line item and a single ship-to partner. Just before sh
-
Active business function RE_GEN_CI_1
Hi experts, I have installed SAP ERP 6.0 EHP4 Ready - Support Release 1, ABAP-based I want to active business function RE_GEN_CI_1. But I cannot find RE_GEN_CI_1 in T-code SFW5, what wrong? Please help me, Thanks so much
-
Hi Q: What is INFOPACKAGE in BIW ? & Why it is important?
-
Instant MSGs being placed in incorrect order
I currently use Skype Desktop Version 7.5.0.102 for Windows 8 So, I've been having a lot of trouble with skype recently, mainly with msg order. Though the order of the messages isnt wildy inaccurate, it tends to place replies from others, earlier fro
-
Migrating Oracle 9i to Oracle 10g
Hi all, We have a database running on Oracle 9i(9.2.0.6), and we need to migrate this to Oracle 10g 10.2.0.1. Can any body suggest the procedure/links? Thanks in advance.