Someone please help with Photoshop CS5 opening error

Everytime I try to open Photoshop CS5 on my Macbook Pro, it starts to load and then right after it says "Initializing panels..." it stops loading and an error message error pops up and says "Could not initialzie Photoshop because of a program error." I'm not sure at all what I did to cause this. I have Premire CS5 and After Effects CS5 also installed and those load and work perfectly fine. Photoshop just stopped working all of a sudden. Photoshop is running in 64 bit mode but i also tried to run it in 32 bit mode and that did not work either.
Thank you for anyone that helps.
Here are all my specs:
- Macbook Pro
- Mac OS X 10.5.8
- 8 GB RAM
- ~6 GB left of space on my harddrive
- Photoshop CS5 Version 12.0

xstatic606 wrote:
…- ~6 GB left of space on my harddriveæ
That is pathetic little disk space available.
Keep in mind that the OS must share that itty bitty space with Photoshop's Scratch Disk. As a point of reference, I keep a modest, dedicated 160-GB dedicated second internal drive for my Photoshop Scratch Disk alone.
xstatic606 wrote:
…Photoshop CS5 Version 12.0
You should be running Photoshop 12.0.2.
Wo Tai Lao Le
我太老了

Similar Messages

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

My iTunes continues to say "Security Code Invalid" when I know it is in fact correct. I can't update my apps or purchase anything and it's extremely frustrating. Someone please help with what to do?

Every time I go on my iTunes account via my iPhone or even my computer, I get notified that my security code is invalid. My account did this a while back, but I ignored it for a while and it eventually accepted my security code. It's not doing that now. It's been a week, I need to update my apps and want to be able to purchase whatever I want. It's extremely fruststing that it won't accept my actual card security code. Someone please help?

Is the address on your iTunes account exactly the same as on your credit card bill : http://support.apple.com/kb/TS1646 ?

Help with Photoshop CS5 Serial Number Invalid? Please HELP!

Well hey guys, i bought the CD and everything when i had the trial version. I put the Serial number and pressed "Continue". It went away, all the features were there. When i pressed CSLive it said that it was invalid. But everytime i start up Photoshop CS5, they dont ask me for my serial number. Ever since i put in my serial number, it hasnt asked me. I could care less about CSlive. Should i be concerned, all i really want is the product, not CSlive. Should i be concerned.

CSLive features require you to register your serial number so it is tied to your Adobe ID. It seems you haven't done that and thus get the warning or you have registered a foreign language serial and are thus not allowed to use your actual language version of CSLive. Don't ask, it's kinda silly, I know. You won't miss much as a PS user, though. Most of this stuff is aimed at web designers and people using collaborative tools like Adobe Story and Live Exchange.
Mylenium

HELP I Need Help With Photoshop CS5

I have CS% for school. I have Photoshop 64 bit. Every time I open Photoshop to do an assignment it crashes. I have talked to other people who are experiencing the same thing with 64 bit. Everyone I have spoken to with 32 bit seems to be doing fine. Anyone else having that problem? Is there a way to go from 64 bit to 32 bit only in Photoshop. All other parts of CS5 work fine with the 64 bit. HELP PLEASE!!! email me at [email protected]

You are in the wrong forum. To save you time, here is the page with the info on how to get CS5 to switch between 32 and 64.
http://kb2.adobe.com/cps/828/cpsid_82824.html
For Photoshop CS5 questions, you should be in either the Windows or Mac Photoshop forum. Here is a link.
http://forums.adobe.com/community/photoshop

Please help with this part of error...

Hi all,
Please help me with this error. What i was trying to do is that when Server send a message to client, it print out on the screen what is sent to Client. For instance, if the Message is called FirstMessage sent to Client, the message FirstClient will display from server console with a specific message such as "First Message from server to client: first Message") and so on. I tried to implement the below code but when compiled it i got error message as follows :
C:\Java\bin>javac QuoteServer.java
QuoteServer.java:60: <identifier> expected
out.close();
^
QuoteServer.java:61: <identifier> expected
in.close();
^
QuoteServer.java:62: <identifier> expected
clientSocket.close();
^
QuoteServer.java:63: <identifier> expected
myserverSocket.close();
^
4 errors
Her is the Server side socket...
import java.net.*;
import java.io.*;
import java.util.*;
class QuoteServer
public static void main(String[] args) throws IOException
ServerSocket myserverSocket = null;
try
myserverSocket = new ServerSocket(4998);
} catch (IOException e)
                    System.err.println("Could not listen on port: 4998.");
                    System.exit(1);
Socket clientSocket = null;
try
clientSocket = myserverSocket.accept();
} catch (IOException e)
                    System.err.println("Accept failed.");
                    System.exit(1);
               PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
               BufferedReader in = new BufferedReader(
               new InputStreamReader(
               clientSocket.getInputStream()));
               String inputLine, outputLine;
               QuoteProtocol QP = new QuoteProtocol();
               outputLine = QP.processInput(null);
               Date current = new Date();
               out.println(outputLine);
               String ToClient;
               while ((inputLine = in.readLine()) != null )
                         outputLine = QP.processInput(inputLine);
                         out.println(outputLine);
                         System.out.println(inputLine);
                         System.out.println(current.toString());
                         /* additional..if doesn't work delete this code*/
                         while ((ToClient = in.readLine()) != null)
                              System.out.println("Server: " + ToClient);
                              if (ToClient.equals("Bye."))
                              break;
               /* delete up to break*/
                    if (outputLine.equals("Bye."))
                         break;
out.close();
in.close();
clientSocket.close();
myserverSocket.close();
Could someone with the expertise advise me what shall i do?
Thank you very much.
Audrea.

Thanks for the quick reply...
Here is the code with correct open/close braces...
import java.net.*;
import java.io.*;
import java.util.*;
class QuoteServer
public static void main(String[] args) throws IOException
ServerSocket myserverSocket = null;
try
myserverSocket = new ServerSocket(4998);
} catch (IOException e)
                    System.err.println("Could not listen on port: 4998.");
                    System.exit(1);
Socket clientSocket = null;
try
clientSocket = myserverSocket.accept();
} catch (IOException e)
                    System.err.println("Accept failed.");
                    System.exit(1);
               PrintWriter out = new PrintWriter(clientSocket.getOutputStream(), true);
               BufferedReader in = new BufferedReader(
               new InputStreamReader(
               clientSocket.getInputStream()));
               String inputLine, outputLine;
               QuoteProtocol QP = new QuoteProtocol();
               outputLine = QP.processInput(null);
               Date current = new Date();
               out.println(outputLine);
               String ToClient;
               while ((inputLine = in.readLine()) != null )
                         outputLine = QP.processInput(inputLine);
                         out.println(outputLine);
                         System.out.println(inputLine);
                         System.out.println(current.toString());
                         /* additional..if doesn't work delete this code*/
                         while ((ToClient = in.readLine()) != null)
                              System.out.println("Server: " + ToClient);
                              if (ToClient.equals("Bye."))
                              break;
               /* delete up to break*/
                    if (outputLine.equals("Bye."))
                         break;
out.close();
in.close();
clientSocket.close();
myserverSocket.close();
Line 60 starting from out.close(); onwards.
Please help..
Thanks a lot.
Audrea.

Can't open Acrobat Pro 9 with Photoshop cs5 open

For some reason I can't open pdf files or even the Acrobat application while photoshop cs5 is open. As soon as I shut it down I can open the file no problems. I'm assuming it has something to do with how much memory photoshop is using, but I've never had this problem before with any previous versions. Any suggestions would be greatly appreciated.
Cheers

I've noticed two ways it misfunctions
1) Photoshop is open
2) I try to open acrobat by either using the quick launch icon that has always worked in the past, or by opening a pdf file either in a folder or as a link on the web. It will not open and offers no error message. It merely 'dings' at me like when you try to click on something in a doc when you've got another window open and u need to press ok or cancel before you can do anything else.
or
1) I've already got acrobat open
2) I open photoshop ok
3) I go back to acrobat and try to do something like print and the program crashes and shuts down... no error message.
Opening at the original exe doesn't change anything. Acrobat works fine when photoshop isn't open.

Help with Photoshop CS5 update?

I operate in Windows 7. Have been unsuccessful in updating. I keep getting error message serial number is not eligible. Can't understand the instructions on the page that lists this as a common problem. Please help.

This is what I see using that link I posted
Read before you download a CS5 product
You need your CS5 serial number to complete the installation. Need help finding your serial number?
Sign in to My Adobe to find serial numbers for registered products.
Or, see Find a serial number.
Make sure that your system meets the requirements for Creative Suite 5 products.
Having trouble? Get help from our community experts.
Download a CS5 product
Photoshop CS5, Photoshop CS5 Extended
Languages
Mac OS X
Windows
English—International
English—Universal
File 1 of 1 (1.1 GB)
File 1 of 2 (979 MB)
File 2 of 2 (1.2 MB)

I wanted to start a Digital Printing business please help with Photoshop

Hi I wanted to start a digital printing business please help me with photoshop.
I've never used the program before and dont know how to design either. I got the trial edition of the photoshop extended and do I need to take some form of lessons or how do I start learning photo shop to do things like Banners, posters, signage, digital printing in other words...

Before you invest any money in a startup business you MUST make sure you are able to compete with the competition. What you are saying is a bit like - I want to start a bakery but I cant cook and don't know how to use an oven - this might sound negative but try imagine the taste of the cakes....
If you really want to enter into the market your best bet would be to hire a designer/someone who knows about printing/profiling etc as printing can be complex, especially when you bump into technical problems.....You can always learn along side him/her. I don't want to put you off so GO FOR IT!!, but it is tough out there at the moment.

SOMEONE PLEASE HELP WITH MISSING FILES XP PROBLEM

i recently purchased an ipod touch, and all i want to do is get some music on it, and update the firmware, but i cant use itunes, cuz im getting 'there are some files missing' problem.
I swear to god, if i dont get this fixed by the end of the week, im gonna post the latest video on youtube... on how to smash up apple products.
Ive been trying NOT to buy apple products since the first dawn of time, but i do actually like the ipod touch. But, low and behold... the very reason why i never buy apple products has been confirmed!
can someone PLEASE tell me if there is a solid fix for this? i have literally tried EVERYTHING before you ask. im at my wits end.
Using XP home, all updates installed... latest itunes,

It will probably help if you'll post the exact error message and when it's occurring. Otherwise we'll just be guessing, not that someone here might not have a good guess. I'm going to guess that this thread might help:
http://discussions.apple.com/thread.jspa?messageID=11161893&#11161893
Regards.

I give up. Can someone please help with pf24 on Canon?

I thought I understood how to do this but I don't. I have tried several things but the result doesn't look right to me. I have a Canon Vixia HG21 and today I recorded a little with the pf24 mode.
After converting to apple pro res 422 in FCP 7.0, I exported through compressor using Apple Pro Res for progressive material, changed the video settings in the inspector to custom 23.976 frame rate, and turned on frame controls and set deinterlace to reverse telecine. It shows up now as a 23.976 file in quicktime but still looks bad on my monitor, especially when I pan. It's as almost there is ghosting trails. I see this on my external monitor as well, which is a little Vizio HDTV connected HDMI from my Black Magic intensity card.
I then tried cinema tools, and tried their reverse telecine, after guessing at several different options to choose from. The conform button and selecting 23.98 didn't help me either. I am willing to upload the short clip to my mobile me account if someone wants to download and try removing the pulldown for me. I am just stumped, and really want to figure this out. Maybe I am doing it right, and that's just how the quality of the pf24 looks like, but I doubt it.
Someone please let me know if you can help.
Thanks!

Try it without deinterlacing/reverse telecine.

Someone please HELP with iphone/memory allocution problems

Please help me with memory allocution errors on my iPhone (3G) running the latest IOS.

Are you trying to sign into your account on icloud.com?
When you say "I forgot my icloud so I changed it" what did you change?
What is the exact message you are seeing when you try to sign in?

Please help with cannot find symbol error. Been struggling all day :(

Hi all. :)
Writing a game for my phone with KToolbar and have been getting a cannot find symbol error for every variable and method I try to use across Classes. I've looked all over and though it seems a common problem I always either don't understand or can't get working the various solutions. Example of my errors:
C:\...\BTK800i.java:197: cannot find symbol
symbol : variable youSayWhat
location: class HelloCanvas
          youSayWhat=key;
          ^
If I try BTK800i.variable or BTK800i.message I get a new error.
C:\...\src\BTK800i.java:184: non-static method newOrdersSarge() cannot be referenced from a static context
          BTK800i.newOrdersSarge();
          ^
Both these errors apply to both variables and methods. It only happens when I'm using methods/variables of one class in another, am I using public and private incorrectly? It doesn't seem to make a difference if I make variables public or leave them private, I'm trying to get to them with a public method within a private class. Is it something else? I really have no idea. :(
Here's my code, it's long enough to be a tiresome read so I've tried to skip what I know isn't relevant.
public class BTK800i extends MIDlet {
     private Display myDisplay;
     private HelloCanvas myCanvas;
     public int youSayWhat;
        //a whole bunch more skipped here, but I'm fairly certain it's not anything that'll help find a solution
     public BTK800i() {
          paused=false;
public void startApp() throws MIDletStateChangeException {
          if( paused ) {
               myCanvas.repaint();
          else {
               myDisplay=Display.getDisplay(this);
               myCanvas=new HelloCanvas();
               myDisplay.setCurrent(myCanvas);
               myCanvas.setFullScreenMode(true);
               youSayWhat=0;
                       //again with the skipping, more code not related
public void newOrdersSarge() {
//whole bunch of code
//other methods skipped
class HelloCanvas extends Canvas {
     public void keyPressed (int key) {
          youSayWhat=key;
          repaint ();
//skippage
}The stuff I skipped is mainly either more of the same sorta thing or maths/writing to screen stuff.
Thanks alot to anyone who helps. I'm really struggling with this. :(
Dan.

But I have been reading them :(
My next-door neighbour unfortunately is an 80-something married man, but I will go have a looksie about static and instances.
I thought the point of public variables was that other classes could use them, is this wrong?
Also does this mean that to use the variables from my BTK class in the HelloCanvas class I need to first instantiate BTK? I don't understand how that works as the code starts running from the BTK class in the first place :S I guess more reading will help with this.
Thanks very much for replying. :)
Edit:
OK I have read up on it but I don't think I found anything I hadn't read before. I tried to make a new class which I could instantiate to hold all the variables and methods I wanted everything to be able to access, but that went disastrously. Am I right in understanding that there are no global variables in Java? :s
Edited by: Dan69 on Apr 17, 2010 1:15 PM

My new ipod touch 8gb is only registering as a camera. can someone please help with syncing it with my old nano

I have a new 8gb Ipod touch and I am trying to sync my old nano onto it. But, when I am registering the new Ipod touch, it is recognising it as a camera. Can anyone please help? Many thanks in anticipation

Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Someone please help with Photoshop CS5 opening error

Similar Messages

Maybe you are looking for