Someone tell me it aint so: K8N Diamond Plus nForce4

simple really work were buying a job lot of computer bits and pieces so i thought might as well bung a few things on for myself and take advantage of the discount, so a new mobo, memory, and graphics card ive got more than enough spares hdd, fans, dvd/cd drives
took all the stuff home tonight thought i would stick it altogether leave it installing with baby sitter and go pub. So build it and then look at it strangly thinking im missing something then it hits powersupply, bugger how could i forget the powersupply have no fear i'll just take it out of my other rig. so out it comes and i start connecting it all up then i come accross the 12v cpu connecter and i begin to search for a 4 pin connection on my shiny new mobo and what do i find a bloody 8pin one.
The mobo in question is MSI K8N Diamond Plus, nForce4 SLI X16, Socket-939
The power supply in question is found in my sig
My questions is am I screwed, will i have to wait till monday to order a new power supply then wait till it gets delivered or can i just ignore the little factor of 4pins into 8 doesnt fit slap it in switch on and not have the computer start blowing smoke at me. im suspecting a long wait till monday and a longer wait till delivery but stranger things have happened in the computer world

Quote from: thorpe on 17-June-06, 18:13:01
i'll be honest i was thinking your all bonkers
that's not a nice thing to say
Quote from: thorpe on 17-June-06, 18:13:01
got the wife to press the power on button
roflmao this is the best part. i think we should all make our wifes/girlfriends (or the male equivalents) to push the button after a heavy OC or after messing around with the system. that way you can blame it on them if something happens

Similar Messages

MSI K8N Diamond Plus - Guide to my first week

OK, not a newb here, but been around the block quite a bit. MSI K8N Diamond Plus is my 5th A64 mobo (ECS K8M800, my daily undestroyed computer, K8T800, my 12 year olds gamer, Asus A8V Deluxe, first 939 system, Abit AN8 SLI, first SLI gamer, and now the MSI Diamond Plus). Had the KDP (K8N Diamond Plus) for more than a week now, and here's what I've learned.
This is state of the art again, and we have no one to blame but ourselves for the pain this causes us when we upgrade like lunatics
And as usual, the drivers and BIOS are al Dente (i.e. not cooked enought yet, a little raw)
MSI is also oddly silent on this system, which is wierd, as they are a large company, and specifically cater to enthusiasts. But their BIOS guys are MIA. Hopefully this will not be forever. Asus, ABIT, DFI, Epox are always fast with fixes
The board is a nice design, with everything basically accessible, as much as any other board. Lots of purposeful components, not too many dumb frills. No tooty fruity colors, but rather practical parts.
The new 2 piece NForce chipset is fine, and the MSI guys gave us a decent, but funky cooler. It gets a little warm to the touch when you pound on it with Prime95, or Quake4, but other than that it is fine
The manual has a zillion typos, and fortunately for us in this forum, we have shared what we've learned. The translation from Chinese to English leaves quite a bit to be desired, and hopefully, MSI will learn from Asus and Abit and get a better translation service. In 2006 this is just plain stupid, especially with a $225 board
As usual, the mobo supplied tweaker utilities are just aweful. They look like a hallucination from a Hunter S Thompson book, and they work about as well. Core center is a sad state of affairs, and the rest of them just burrow their way into your otherwise stable system and cause it to have poor behavior. And therefore as usual, the BIOS is the best way, if slowest, to tweak this bundle of parts
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
The board is clearly sensitive, which is a result of it being high strung. This is no different than any "first out" product I've ever bought. Most take 2 or 3 turns of the crank to get totally stable and forgiving. This one hated my OCZ platinum EL 2Gb kit memory, and it brought out the worst in one of the SLI based EVGA 7800 GT COs. These components worked in the Abit AN8 SLI (although not always great), but the MSI has ZERO tolerance for even the slightest pertubation from the memory. It was BSOD city until I removed both of these components by process of elimination that took probably 100 hours
Once I removed the bad components, and replaced the memory with Geil Ultra X 2x512 2-2-2-5, it worked great, ran Prime95 for 10 hours with no errors, and seems reasonably stable. I've RMA-d the bad 7800GT CO back to EVGA, and will report back on how SLI behaves when I get the new one (cross shipped of course, I haveno patience )
I also now need to replace the 2Gb RAM kit with something that the board will tolerate. I may RMA the 2Gb kit back to OCZ and try another one, but I dunno. I love OCZ but I have a bad feeling about this, even though they have great!!! support. I may try OCZ PC4000 or the RAM that Roger successfully used.
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth
Finally, I hope this board attracts more people, and therefore more tweakers that can figure out all these gadgets and settings. Everyone flocked to the Asus X16 SLI product, which is too bad, as this one needs lots o' folks to hack it up for us to figure out what is going on.
The on board Creative audio sounds lousy to my ears, and I will replace it with an Audigy 2ZS gamer that I had in the Abit. It just sounds better, but hopefully the drivers will not trash my newly stable system. Creative scares me, they scare me alot.
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
I hope this info is somewhat valuable to someone on this board. I will post details of all changes that I make, as others are doing, so we can at least take care of ourselves with this thing.

Quote from: nanohead on 15-February-06, 01:17:10
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
first of all, i do think that all the settings in the BIOS have an explanation in the manual, even if it's a basic one. if that explanation doesn't tell you everything in detail, is because if you do need a detailed explanation of the settings, you probably shouldn't be messing around with those settings.
Quote from: nanohead on 15-February-06, 01:17:10
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth.
wanna tell me how did you get 1.95V on that mobo?
Quote from: nanohead on 15-February-06, 01:17:10
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
a 0.5V bump? again, you must be joking. maybe 0.05V.

MSI-K8N Diamond Plus - which memory?

Hello,
I will soon buy the K8N Diamond PLus motherboard. For that motherboard, I have selected the following memory: Corsair 512 Mo DDR-SDRAM PC3200 CMX Cas-2. But I can not find if this is ok for this type of motherboard. Does someone knows something about that? ???
Thx in advance!

Marlysa,
I would suggest that you stay away from the corsair xms ram as i figured the sme thing when I built my system, that it,s Corsair and its the #1 selected ram and usualy the most compatible, But this is not the case with this motherboard it's very picky about hardware pretty much the same as DFI board's!!!
Of course the CORSAIR WEBSITE will tell you this they want youre money!!!!!! Their certainly not going to reccomend OCZ MEMMORY that's for sure!!!!!
Please reconsider youre decision as I myself have traveled down that road you about to take. Personaly I love Corsair ram and i certainly wont bash it, but get the OCZ5002048ELGEGXT-K it cost me $213.00 wth tax for 2 gigs instead of $160.00 with tax for the corasir xms 2- 512 sticks Believe me you will be thankful that you took my suggestion!!!!! with the new 1.20 BIOS at optimized default's it posts and configures itself automatically where as befor you would usealy have to configure it manually in bios to get it to post at 500mhz believe me this OCZ MEMORY ROCKS!!!!
Save youreself alot of this.... BUY IT!!!!!!
Brother Esau
P.S just check around the forum their's alot of peop[le that have issues with the DIAMOND PUS AND CORSAIR RAM.

MOVED: K8N Diamond Plus Motherboard overclocking problem.

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=93776.0

Quote from: TimeReaper on 15-February-06, 09:15:17
I know this board can reach 300+ by reviews by Tom's Hardware. But I was wondering how I could get my FSB up there? I can't seem to get past the hurtle at 270. Anything above this will make the system fail to start up and I have to clear the BIOS again.
I lowered the HT to the equivalent of 3X, and CPU Multiplier to 8X using a venice core 3500+. I even tried adding voltage to the HT. I'm wondering if I'm missing something in this equation that stops me from getting 300+ FSB? The overclockable items are too many and unexplained.
If someone could spread some light on what else needs to be done, please tell me.
My system is as follows.
MSI K8N Diamond Plus
AMD64 3500+ Venice
OCZ DDR600 Platinum Elite
520 OCZ Powerstream
2x Samsung 200G@Raid 0
Zalman CNPS 9500 LED
Sapphire GTO2
Hi dude,
I have the similar problem as well. Sounds like you are in the bad shape, but yeah, try to loose your RAM settings. First, all settings auto seem to be good, but it's actually not the case. You have to set TRC and TRFC as higher than 12 and 14. I am seeting those to be 14, 18, and it seems to be working great. It will be better to set the burst length as 4 beats. I don't like this board coz I can't set the drive length to be weak instead of normal detected by the Windows. My system can post, but I got problems of playing 3D demos and games, which looks like it's the problem of motherboard. Not mature enough.
My rig:
AMD Athlon64 3700+ @ 2.7GHz
OCZ Platinum Elite DDR600 2.5-4-4-10 Dual Channel
Leadtek PX6800GT @ 425/1200 at 2nd PCIe slot
2 x WD 120GB 7200RPM + Samsung 160GB HD

K8N Diamond Plus & Corecell- temp & voltage accurate?

I just set up my new system with this motherboard (K8N Diamond Plus,) an Opteron 165, Scythe Mine heatsink, and a Silverstone Zeus 560w. Its these components that lead to my question-
I am getting temps of about 31C idle, 41C load. Nice temps yes, but I'm not sure how accurate those are. That means that it is idling at 86F in a room that was probably in the high 70's, maybe 80. Seems a little too good to be true, but then again, I am used to Intel's furnace-like temps
Its the voltage reading that has me a bit more concerned though. Corecell is reading my +5v as 5.36v, and my +12v as 12.28v. The +3.3v is reading about spot-on at 3.33v. I'm hoping that someone else who has this motherboard can tell me this- are the readings in Corecell for this motherboard generally accurate, and should I be concerned about this?

You can post more then one item per thread..
Since you already have a thread running, I am locking this one.
You can copy and paste to your other thread if you like.
Richard

K8N Diamond Plus- bios freeze & question about temp/voltage monitor

A weird issue I had right after I setup my mobo last night was that I could not access the "PC Health" portion of the bios. If I tried selecting it, it would just freeze. Is this a known issue? I'm hoping a bios update may solve this one. Does anyone know anything about this?

Well I was mostly just asking if this was a known issue, so I guess "no" is all the answer I need... Now, what would be my best solution? I am assuming bios update, is there anything else that I should consider?
But if it helps, as I said its a brand new build, so I'm running the default bios. 1.00. My other components are: Silverstone Zeus 560w, 2GB of G.Skill pc4000, Raptor 74gb, 7900gtx, Opteron 165.
Also, since my other thread was locked (I figured seperating two different topics would make it easier for people to respond to specific questions, I apologize,) here's my other question pasted:
"I just set up my new system with this motherboard (K8N Diamond Plus,) an Opteron 165, Scythe Mine heatsink, and a Silverstone Zeus 560w. Its these components that lead to my question-
I am getting temps of about 31C idle, 41C load. Nice temps yes, but I'm not sure how accurate those are. That means that it is idling at 86F in a room that was probably in the high 70's, maybe 80. Seems a little too good to be true, but then again, I am used to Intel's furnace-like temps
Its the voltage reading that has me a bit more concerned though. Corecenter is reading my +5v as 5.36v, and my +12v as 12.28v. The +3.3v is reading about spot-on at 3.33v. I'm hoping that someone else who has this motherboard can tell me this- are the readings in Corecenter for this motherboard generally accurate, and should I be concerned about this?"
Thanks for any help you can give. No sig yet because I just registered an hour ago, I'll work on it.

K8N Diamond Plus incompatible w/ENERMAX Liberty ELT620

Howdy folks, 1st post and yet I'm about to loose my AMD virginity, so please be gentle.
The new build has already been purchased and is in transit, so info would be greatly appreciated.
I a$$umed 620W Liberty with 12v combined @ 36A is over blown.
That is until I found this site. Still shaking my head at the high amperage needed for this type of bleeding edge tech.
I’m just stunned that (2) 12v 22A rails are considered underpowered…
So any one have any success with this woefully <sarcasm ON> under powered cheap <sarcasm OFF> Enermax 620?
I really need the power and drive connectors, but most of the 26A PS would have too narrow of a head room.
I am well over budget, and the peripherals should be here for a weekend build.
Hoping folks with the Diamond plus and Enermax ELT620 could please post experiences.
Not sure if the second MoBo power plug works off the “other” rail, since I have not even seen this PS or K8N Plus.
Of course, I will post results.
Thank you for your time
Early March build
MSI K8N Diamond Plus
   Factory BIOS this time
Opty 165 Denmark
   ZALMAN CNPS9500
G.SKILL Extreme Series 2GB (2 x 1GB) DDR 500
SAPPHIRE Radeon X800GTO2 (100130VIVOL)
   Most stable driver for text/2D graphics @ 3200x1200
   ARCTIC COOLING AVC-AT5 Rev. 2 VGA Cooler
ENERMAX Liberty ELT620AWT ATX12V 620W
   +3.3V@28A, +5V@32A, +12V1@22A, +12V2@22A, [email protected], +5VSB@3A
(3x)Western Digital SE16 WD2500KS - SATA
(5) 120mm Fans & (2) 80mm +PS
ASUS DVD DRW-1608P2S
LITE-ON DVD-RAM SHM-165P6S
CM Stacker 810 RC-810-SKN1
XP Pro SP2
Snagged from my trusty ABIT ST6-RAID 1.4 PIII <old, like me!>
SIIG USB 2.0+1394+ULTRA PATA/133 RAID CONTROLLER
   (2x)Samsung 160G SP1614N – PATA
   Seagate 120 GB PATA ST3120026A-RK

In most cases it should be just fine. The only area where it may fall over in is DLI'ing two of the bigger Vid cards. The reason is in how dual rails split the power. As far as anyone can tell the best solution for SLI'ing two high amp vid cards is still with a single rail PSU. Outside of that the Liberty should be fine by all I can tell without trying it myself. That won't happen though as I gave up on Enermax due to the fact that I want Dual High Draw Vid cards and they simply don't fit that bill in my book any longer. Either you get Dual Rails from them or the wrong cable sets. That is why I went to OCZ.
Your milage may vary.

K8N Diamond Plus and Opteron 175

Anyone running a K8N Diamond Plus and an Opteron 175 ok?
Any problems?
Any tips?

Quote from: skippy9146 on 20-January-06, 08:51:51
They should run fine... as a Diamond Plus comes with a Dual Core compatable BIOS.
You'll have to post back with some news when you get it together.... I have a 165 that needs a new home.
thanks for the reply, i kinda figured it might support it, as the M8N Diamond does (accordingto the cpu support list) but MSI's site doesn't seem to have much info about the K8N Diamond plus, not even a single bios upgrade or anything.
I have an ASUS A8N32-SLI but i have 3 issues with it:
1) can't install vista 5270 - common problem, not just me
2) poor pci slot location when using 2 pci-express dual width gfx cards
3) only available pci slot shares an IRQ with 2nd gfx card, bad for sound cards
I was going to order one this weekend but i might just not bother now as someone else posted the xfi cards don't work with them (popping/crackling, just like i have now) and that was my main motivation for getting rid of my asus board as my xfi card doesn't work either.

K8N Diamond Plus SiI 3132 WinXP x64 non-RAID drivers?

Hi
I'm looking for non-RAID drivers for the SiI 3132 on my K8N Diamond Plus for WinXP x64 (I managed to fine the x32 ones and they work fine so I know it's not the drives or the moboard. I tried the drivers on MSI's website.
I've searched around the forum and followed the leads onto planetamd64 and the Asus website for them, but to no avail.
To be precise, I have selected non-RAID in the BIOS, and the drives to show up on on the POST screen, but do not appear in Win 64; there is the classic exclamation mark in the device manager for a 'Mass Storage Device'. I don't want to concatenate the drives in RAID mode, so I did not try booting with that selected in the BIOS lest it destroy the stuff I have on them.
[I miss the simple JBOD option in the 3114...]
Any help gratefully appreciated!
thx
bn

Hi all,
I solved the problem.
You won't find the drivers under the drivers section of SiI's website but you will in the Knowledge Base. Look under Serial ATA | COntrollers | SiI3132, you'll find article 11043 'SATA 64 bit Windows IDE driver - released' dated 8/19/05. Click under that and you'll find a file 3132_win64_idrv_1004_logo.zip. It's what you need.
Hope this helps someone.
bn

K8n diamond plus no audio after connecting Avermedia/Hauppauge tv card

k8n diamond plus
Avermedia mce m1a2 tv dual tuner
windows xp mce
after connecting the tv tuner card there is no more audio at the speaker output.
(the same problem occurs with a Hauppauge tv pvr 500)
the headphone output is still working.
is there someone who knows how to solve this problem ??

Found it here ! it works
http://forumz.tomshardware.com/hardware/k8N-Diamand-Sound-ftopict183919.html

K8N Diamond Plus shutdown issue

I am running the K8N Diamond Plus with bios 1.2
3500+ <stock ghz>
2x1gb corsair
1 74gb raptor
1 7900GT 256
2 samsung dvd burners
OCZ520ADJSLI powersupply
2 case fans
Recently, my powersupply went out and i ordered a new one.. same model...when i hooked it up and turned on the computer, Windows loaded, i logged and shortly after i logged in, the computer shutdown... like, no blue screen, no reboot... it just turned off like it was shuttingdown or someone pulled the power cord.
confused, i hit the power button and the computer turned back on, but this time, it barely made it to the login screen and it shut off again.. each time, i would turn it on, it would shut off sooner than the previsous time. so i stripped everything out.. no fans, no hd, do dvds, different ram, same cpu, same vid card. This time i just booted to the bios. at 30 seconds it turned off. i turned it back on. at 23 seconds it shut off, i turned it back on. at 15 seconds it shut off, i turned it back on... it got to the point that as soon as i would hit the power button, it would shut off...
thinking that i could of possible received a bad power supply, i hooked it up to a different mother board. this system did not shut off.
any ideas on what could be going on? unfortunatly at this time i do not have another power supply to test on this board. I will pick one up if people think the power supply could be the problem.
thanks in advance!!

hello, sound like a bad new psu to me did you plug in both mobo connectors? do you have a volt meter to ck psu outputs might try that. another psu would be the next thing to try. good luck Henry

K8N Diamond Plus Power on problem

I have this problem with the board where I shut down windows, and it does shut down by the way. But the strange thing is that right after it powers down, like say a second, it restarts itself as if I pressed the power button immediately after. Though I can correct this by pressing power again while it is still going through the motherboard check ups, I was wondering if someone had similar problems. If so, if there is a solution to correct this bug?
I am currently using the 1.16 version patch.

CPU=Opteron 170
Motherboard=MSI K8N Diamond Plus
Videocard=Sapphire X800GTO2
Soundcard=Creative X-Fi
Hard drive= 2x RaptorX 150GB @ Raid 0
PSU=OCZ Powerstream 600
CPU Cooler=Zalman CNPS 9500LED
3x 80mm exhaust fan
1x 120mm intake fan
1x Vortex 2 Intake crossblower
1x Slot Exhaust
1x Antec Vcool Intake
I'll check on that wake lan thing.

K8N Diamond Plus audio out problem

Hi,
I'm having an issue with the audio out on my K8N Diamond Plus. The rear audio out works fine when left jumpered. However when I connect the front panel audio connector to the mother board the volume of the rear audio out drops to an almost in audable level while the front panel audio works as expected.
At first I thought the rear audio had been completely disabled until I tried turning my speakers all the way up.
Is there a software issue here?
FYI I'm trying to use the front pannel audio connection on a Silverstone TJ07 case.

hey - mikein_texas here - i have same board but with a Centurion case -
couple of things i ran into - maybe will spark some ideas
initally i hooked up front panel audio and got nothing
then i read on page 2-19 of manual that 5-6,9-20 have to be jumpered for rear audio to work
but that means no front audio which was a drag - but solved that prob with usb mike and headphones
apparently unless i am reading it wrong and someone please correct me if so, but you can have front audio OR rear audio
BUT not both
again look at page 2-19 in manual and specifically at text in grey box in middle of page
Yukon PXE 2.01 ( 20040406 )
Pre-boot Execution Environment PXE v.2.1
DLink Cable Modem - model DCM-202
ViewSonic VX2025WM 20.1" Widescreen TFT LCD - 1680x1050, 800:1, 8ms
MSI K8N Diamond Plus Socket 939 NVIDIA nForce4 SLI X16 ATX AMD
SAMSUNG Black 1.44MB 3.5" Internal Floppy Drive Model SFD321B/LBL1
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s
XFX Geforce 7600GT PV-T73G-UDD3 Video Card
SAMSUNG 16X DVD±R DVD Burner - 5X DVD-RAM Write and LightScribe Black ATA/ATAPI Model SH-S162L/BEBN
COOLER MASTER Centurion 532 RC-532-SKN1 Black Computer Case
AMD Opteron 165 Denmark 1000MHz HT 2 x 1MB L2 Cache Socket 939 Dual Core
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400
Seagate Barracuda 7200.9 ST3808110AS 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive
Ultra ULT31849 X-Finity 600W Power Supply
Cooler Master A12025-12CB-5BN-L1- 120 x 120 x 25mm 1200rpm, 43cfm, 22dBA, LED, 3-pin - front intake case fan
Scythe S-FLEX SFF21F 1,600rpm, 49.0CFM, 20.1dBA, 3-pin, 120mm S-FDB Bearing - rear exhaust case fan

K8N Diamond Plus

Beta BIOS for K8N Diamond Plus (MS-7220, PCB 1.0)
BIOS Sign-on message: MSI Project A7220NMS V1.34 04/23/07 (Date: 04/23/2007)
Attachment name: A7220NMSv134.zip
Make and ensure PC is stable before proceed. Remove any OC temporary if you have.
Use Beta or Modded BIOSes at own risk!
flash BIOS from USB key, by using our Tool(easy & safe way to flash):
MSI Forum HQ USB Flashing Tool

Hello,
I just installed the bios 1.34 on my K8N Diamond Plus MB. Everything went ok with the flash USB utility program.
Has anyone had trouble Disabling PCI ... and/or SATA ... Speed spectrum?
Everytime I try to disable them the computer freezes and restarts.
I did unplug the power cable and cleared the cmos by pressing the clear cmos button on board and all that good stuff.
Granted it's a beta Bios but just wanted to know if anyone else having that problem.
Sorry for bring this old topic back up. Didn't know if I should start another topic or posted in here. So please be kind
Bluephoenix

CPU Usage 100%? K8N Diamond Plus

Never before have I witnessed the CPU being used at it's absolute maximum. It has been occuring regularily with my system. I noticed it first when my screen saver started getting jittery. This seems to occur most often about 1-2 minutes after windows finishes loading. It seems kind of odd to me that this occurs during typically idle system times. The memory usage also dramatically rises during these spikes, using ctrl+alt+delete I noticed svchost.exe to be the culprit of the memory usage atleast. The hard drive doesn't appear to be active when these events occur. Is this normal for this motherboard, or is this something that should be corrected?
I've always had 3 short beeps upon startup with this board, but it has never stalled the boot process. Anyone know what this means?
I've upgraded my board somewhat recently and carried over the CPU and memory from a older MSI model that used the same type. Could it be possible either or both are incompatible?
Also one, somewhat less important problem. First off I must say that the PS/2 power on feature is pretty cool. I used it with a wireless keyboard so I could turn on my PC from my living room HDTV (I have my comp wired through Y/Pr/Pb cables). Only problem is about one in every 4 or so shutdowns the system restarts immediatly when this feature is selected in the bios. Bios issue maybe?
System Info (and everything directly connected to it):
(pretty sure not all of this is relevant, but I figure it couldn't hurt)
MoBo: MSI K8N Diamond Plus
Memory: 1Gb (2x512 kit) Crucial PC3200 CT6464Z40B.C8TD (in slots 1 & 2)
Processor: Athlon 64 3200+ Winchester
GPU (only one): MSI NX7900GT-VT2D256E-HD (primary PCI-e)
Modem: SupraMax LE 56K Fax Modem (PCI)
HDD: WD Caviar 120Gb IDE (primary)
HDD: Maxtor 80Gb USB (external, non system)
3.5: Standard 3.5" floppy drive (a:)
5.25: Lite-on 48x CD burner (secondary slave)
5.25: Sony DVD rom (secondary master)
PS: Antec SmartPower 2.0 500W
Human Interface: Wired Logitech KB & Mouse through USB (for primary use)
Human Interface: Wireless Logitech KB & Mouse through PS/2 (for remote use, often turned off)
Primary Monitor: Viewsonic P70f 17" CRT hooked to DVI #1 via RGB adapter
Secondary Monitor: Sony KDL-V32XBR1 32" HDTV through 1080i Y/Pr/Pb adapter, stereo audio
Speakers: harman/kardon
Connected to internet via Cat5 network, phone modem sometimes used when primary internet is down
OS: Windows XP Pro w/ SP 2 installed
Thank's in advance to anyone that can help me as I'm pretty much stumped at this point.

Quote from: mdawgmike on 11-November-06, 11:25:18
Any other suggestions?
how about this:
Quote from: BOSSKILLER on 03-November-06, 23:14:30
get Process Explorer to determinate in details what make this CPU usage: http://www.sysinternals.com/Utilities/ProcessExplorer.html
it has more detailed information than the built-in task manager.

Someone tell me it aint so: K8N Diamond Plus nForce4

Similar Messages

Maybe you are looking for