Someone with enough points to report a post

can someone with enough points please report this post
https://discussions.apple.com/message/16308484#16308484

David, thanks for being so vigilant, but don't worry, there are many people who read the forums and action posts, and the moderators have automated systems for detecting problem posts also. So just enjoy the forum

Similar Messages

Need help Reporting a post

Hi. I'd also like to get some assistance in reporting a message and ultimately having it removed. The user has intentionally posted a potential hack for a piece of software and is encouraging other users to steal. If someone with some points could report it for me, I'd be grateful.
Last Message: https://discussions.apple.com/message/23784678?tstart=0#23784678
Thread: https://discussions.apple.com/message/18249268#18249268
Username: William Stanton

Twice, acually.
Cheers, mate.

GR with backflush not for reporting point logic with autom. GR option

Dear Experts,
While doing backflashing though MFBF we are getting following error
"GR with backflush not for reporting point logic with autom. GR option"
We have maintained 5 production version for this material while calling with first production version we are getting the error.
Rate routing & BOM maintanied for the FERT material
Thanks

Did you check the BackFlash option are actuvated in the following places ?
1. In the Rate routing, the backflush indicator is set in the component assignment.-CA22
2. In the material master record, the backflush indicator has the characteristic "Always backflush".-MRP3
3. In the material master record, the backflush indicator has the characteristic "Work center decides", the indicator being set in the work center.-CR21-Basic Data View .
4.Goto-MM02-MRP4 View -Select the PV-Goto Details -Check particularly this production version REM Allowed or not
5.You should use REM-Profile -0004/0003 where RP and Auto GR with RP at last Back Flashing Activated .
6.Check Rate Routing Operation Control Key -Auto GR with indicator Confirmation required
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:19 AM

Report a post

How do you report a post (actually there are 5 of them just the same):
http://discussions.apple.com/thread.jspa?threadID=1190029&tstart=0
I guess Apple Discussions server did not update properly lately because I still do not have the "report this post" link .....
Then someone else can report it instead.
So this ends up being a request more than a question....

Hardy Geer wrote:
It is more than a moronic joke. He is trying to get some illegal cash.
Not necessarily. Do not assume anything in the post or the user profile is accurate. The perpetrator may be targeting someone by masquerading as him, or simply trying to get a nice list of Discussions users email addresses for those irate enough to reply to the one listed in the profile.
Like with all spam, the safest thing to do is report it if possible & otherwise ignore it. If this sort of thing becomes more common, the moderators may have to make changes either to staffing hours or to signup procedures or something, but it is their concern & not ours.

"Cannot find file" with "!" point

I have read a reply to this same problem by Katrina which identifies a way to open the old library, but her description is too technical for me to follow to conclusion and eliminate the problem. In short, I am getting a version of my library with exclamation points which will not allow me to add new MP3 files to my player. Can someone please,....please,....post a detailed reply with a step by step means to eliminate this annoying problem, thank you

Several ways to Clean Up Your Library by Finding &/or Removing Broken ("!" )or ‘dead links’ within iTunes:
If you move, edit, delete or otherwise change a music file listed in the iTunes Library with a program or tool other than iTunes, you may end up with a "!" in front of the song name or a message like “the original file could not be found. Would you like to locate it?" *It is important to note that iTunes does not keep track of music file changes made outside of iTunes.*
This can also happen if you store some/all of your music on an External HD (ExHD) that is not permanently mapped to a specific drive letter. Attaching another external connection (USB Flash Pen, Camera, etc.) can take that drive letter and move your ExHD down the alphabet. iTunes will get lost when this happens. Bet to initially mount any iTunes music ExHD further down the alphabet – say L: (for Lossless) or M: (for Music). This way, your ExHD drive designation should not inadvertently change.
See these Threads for ways of finding &/or removing the Broken Links:
http://discussions.apple.com/message.jspa?messageID=818692#818692
http://discussions.apple.com/message.jspa?messageID=607582
EASIER:
Download this to your Desktop: http://ottodestruct.com/itunes/FindDeadTracks.txt (right-click, save-link-as)
and this, as well: http://ottodestruct.com/itunes/RemoveDeadTracks.txt (right-click, save-link-as)
Rename each to FindDeadTracks.js & RemoveDeadTracks.js respectively.
Run iTunes.
1) While iTunes is running, double click FindDeadTracks.js to run the script.
It will give you a list of all the exclamation marked tracks.
2) While iTunes is running, double click RemoveDeadTracks.js to run the script.
It will remove all the exclamation marked tracks.
One step, no fuss, no muss.
Then, give Otto42 a big 'Thanks' for this one.
Best of Luck

Recovery Point Status Report Shows Only One Day

Hello. Our Recovery Point Status Report showed us the last five days until about a month ago and now it only shows us one day. Just happened over a week-end when there was nothing changed on the server. We appear to have recovery points that go back
a week and the recovery point status is set to a month. We are running System Center 2012 R2 DPM.
Any help is appreciated, thank you for your time.
g

Hi,
Check your status report granularity settings for each protection group and make sure it's set for 1 day instead of weekly.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Critical Errors SCCM 2012 (Distribution Point and Reporting services point)

Hello,
We are getting errors under the Site Status for the Distribution Point and Reporting services point. Was running fine and have not really made any changes but all of a sudden we have these critical errors.
The report server service is not running on Reporting Service Point server "XXXXXXXXXXX"; start the service to enable reporting.
We have stopped and restarted the SQL 2012 reporting service point with no errors. What else should we look at for this error? And are these related?
Thanks,
Bobby

Hi,
Have you checked the log file SRSRP.log?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Connecting ipod to computer causes folder with exclamation point

Alright, my ipod works fine until I plug it into my computer, at which point itunes and possibly the whole computer will freeze up for a good 10 minutes, and the computer will try to recognize the device. The computer recognizes the device, and tries to autoplay it, however trying to open the ipod or perform any action on it (e.g. format it) will cause my computer and explorer.exe to freeze
I followed the directives here, http://www.zolved.com/guruconnect/showexchange/1086/It_has_the_folder_with_the_exclamation_point_on_the_screen_,
which told me to uninstall itunes, restart, clear the temp files, and then reinstall. This worked for a few hours and I was updating my ipod. It was taking forever to sync, and when I manually switched off my monitor to go to bed I heard the series of beeps indicating a device had been removed. I found the error had reared its ugly head.
Once the folder with exclamation point appears, the ipod will continually reset itself. 5 or 6 resets later, the ipod will function normally again until I plug it in to the computer, and the cycle starts over again.
What I have tried:
Restoring - as I said fixed until I plug into my computer
Formatting - "
Using it on my brother's Mac- it will recognize the ipod, and say it needs to be restored, however cannot restore it due to a 1419 (I think) error. After formatting it on the mac, it worked fine until plugged into the pc.
Im fairly sure that the problem lies with somethingon my computer. Does anyone have any idea what the culprit could be? Any help would be much appreciated, this finnicky ipod is making me want to tear my hair out!
Dell 4600 Windows XP

I notice your sig says you have a Sony Vaio. The Sony Media Watcher program is known to cause conflicts of deleting itunes libraries - not your specific problem, I understand, but I wonder if this is some new fun feature that is somehow related?
If you have ever run the Sony media software, it is "watching" the itunes folders. Try telling it not to watch the itunes folder temporarily and see if things work better. Or even uninstall it, considering Sony came out with that fab rootkit ; 0
I don't have a vaio, so can't suggest much more, but there are posts from other vaio owners in this topic
http://discussions.apple.com/thread.jspa?threadID=1800551
Near the bottom are the posts about telling it not to watch folders; the posts on uninstalling come before that.

After I reset my Ipod nano the folder icon with excamation point show up.

My Ipod nano was freeze, so I reset it and after that, It shows the folder icon with excalmation point,why does that happened? how can i fixed_?

Check these out:
iPod Folder with Exclamation Point After Disconnected From Computer
iPod Folder with Exclamation Point After Turned On
Put iPod into Disk Mode Manually – Worked for Me!
Good Thread About iPod Sad icon/Folder with Exclamation Point
By the way, you might want to post in the iPod nano forums from now on, as you will most likely get more help in there in the future.
I hope this helps!

An app which I have never purchased shows as an update on the App store. When I try to deal qith it shows as being purchased by someone with a different apple id than me. No one else uses my Macbook Pro. Any ideas???

An app which I have never purchased shows as an update on the App store. When I try to deal with it shows as being purchased by someone with a different apple id than me. No one else uses my Macbook Pro. A "Genius" at one of my local Apple stores spent over 2 hours trying to fix this and could not do it. His last suuggestion was to go home, back up all the data an take the computer back to the Apple store to reinstall the operating system. Any simpler ideas to solve this problem.???

Post in the App Store forum:
https://discussions.apple.com/community/mac_app_store

Report this post ?

Today I just noticed a link at the bottom of posts that says "report this post". I became level 2 two days ago, and am wondering if this is new to level 2 users, or if it is new to all users as of today (march 1st). I didn't notice this yesterday, but I have been known to miss things...

818/3264
Hi maciscool,
(I agree with your name
Yes, this ancient feature was disabled until last week, that's why you didn't notice it.
Also, I'm not sure it is available to Level 1 members.
Axl

How to keep the field open for input with error message in report program

Hi,
Need a help in solving the below issue.
"How to keep the field open for input with error message in report program"
Regards,
C.Shasiraj.

Hi...
you have to use the event:
AT SELECTION-SCREEN ON <FIELD> EVENT.
u have to give an error message in this event.
Consider the following Example:
PARAMETERS : NUMBER TYPE I.
AT SELECTION-SCREEN ON NUMBER.
IF NUMBER = 10.
MESSAGE 'Number vakue is 10' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
WRITE NUMBER.

in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
Execute this program once u will understand....
also Consider the following links :
Regarding events:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
Regarding messages:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
This is very useful.......
Reward points if useful....
Suresh....

What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
2)workflow concepts for Purchase order?
3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

Hi,
I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
also you may want to post your question in SAP Microsoft Interoperability forum
Regards,
Chandra

Someone with enough points to report a post

Similar Messages

Maybe you are looking for