Somethimes no hand tool pressing the space key

Sometimes when I try to get the hand tool pressing the space-key it doesn´t work (same time in Photoshop, Illustrator, InDesign). I not even see the hand-Icon, nothing happens. After a restart of my Mac it works normal. It´s definitly not the key, it works normal in other applications. How can I solve this problem?

No one an answer or solution for me? No Adobe supporter? Adobe says I will get an answer here … not good for a cloud member

Similar Messages

Brand new Notebook Keyboard adds a "space" after pressing the "B" key?!

My brand new HP ENVY 17 SELECT EDITION NOTEBOOK PC 's keyboard keeps adding a space everytime I press the "B" key.... HALP?
Example: "B rand new PC"

Have you tried this?
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

My space bar only works when i press the alt key, help!

My space bar only works when i press the alt key, help!

I researched on here and my space bar was set for the speech function, now resolved...this site obviously works, nice one!

Using the rotate tool and hand tool at the same time in CS6

When using the rotate tool, you used to be able to use the hand tool even when the Rotate dialogue box was up. Is there a way to get that back?
I make Mandalas (http://www.behance.net/gallery/Mandala/2700497) and work from the center out. This poster is 18"x24" so once I start to get to the outer edge, I'm zoomed into the center at 6400% so I can get my crosshairs as precise as I can, then enter a number (45 degrees, 20 degrees, etc.). Clicking Preview helps, but if you're zoomed in and the object is out of view, you have to guess where it's going. In CS5, you could press down the space bar and use the Hand Tool even while the dialog box was up. Is there a fix for this? (Sorry if this doesn't make sense...it's kind of hard to explain over a forum.)

TBamber wrote:
When using the rotate tool, you used to be able to use the hand tool even when the Rotate dialogue box was up. ....
CS5 on Windows 7.
I can use the hand tool while pressing the Space bar while another tool including the Rotate tool is current. But I can not use the Hand tool in anyway if I'm in the process of using the Rotate tool by holding down the mouse button or dragging with it.
While the Rotate dialog is displayed I can not do anything outside of it in any way.
I can use the scroll wheel on the mouse to scroll the view up or down vertically while using any of the tools including the Rotate tool but not when a tool dialog is open.
I'm curious if others experience different behavior on a Windows system .

Is there a way to adjust the Scroll bar? Because when I press the arrows key once it goes straight to the bottom of the page rather than going down gradually.

Before when I pressed the arrow key to navigate up and down the screen it would do it gradually. After I up graded to the current version it now skips down to the very bottom of the page.

You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].<br />
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.<br />
See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

Accidentally pressing the "fn" key and spacebar simultaneously erased my entire document. How do I get back everything that I wrote?

Hi! I just got my first Macbook, after years of having PCs crash on me all the time. I'm very excited and very satisfied with it so far. However, as I was writing a very important email, I accidentally pressed the "fn" key and the space bar at the same time, and everything I wrote got deleted. It was almost 2 pages! Is there any way I can get back everything that I wrote? Thank you.

Here's a link to some of them http://support.apple.com/kb/ht1343
Chris

I have MacAir with OS 10.8.4, how can I cancel the automatic link of my USB flashdisk to Mac instead of BootCamp, since I have one time press the ALT key before choosing "MAC" or "BOOTCAMP". Thanks

I have MacAir with OS 10.8.4, how can I cancel the automatic link of my USB flashdisk to Mac instead of BootCamp, since I have one time press the ALT key before choosing "MAC" or "BOOTCAMP". Thanks

That only happens when you are running Windows in a Virtual Machine with OS X as the host. Shut down the VM and restart your Mac. Once the VM is running again and you insert a USB flash drive you should get that prompt again.

Opening an application while pressing the shift key

Recently, Microsoft Word 2011 failed to open and showed the message, "Microsoft Word has encountered a problem and needs to close." I followed troubleshooting instructions on the Microsoft website. Nothing cured the problem, but creating a new user account did enable Word 2011 to open normally. That seemed to imply that "a corrupt user account" was causing the problem. I could not find any instructions about how to repair that, but at some point I came across the suggestion to "hold the shift key down and click on the Word icon in the dock." I did this and Word opened normally in my account. After this, Word opened normally without holding down the shift key. Apparently this fixed the problem.
My question is, what does pressing the shift key do while you open an application? What's different? Why did it work? What's special about the shift key in this situation?
Thanks.

It may be something specific to Word/Office. Individual applications may accept different launch arguments passed to them via key combinations, such as holding the Option key when launching iTunes to invoke the option for choosing the library to use.

HT4061 my ipad air is in recovery mode and it is not starting.I pressed the main key when connected to my computer but there was no response

My ipad has gone in recovery mode when I tried to upgrade my system software.it showed a loading bar and then turned off and never started.i tried to turn it on by pressing the home key and start button simultaneously but there was no response.i even connected it to the itunes but there was no response by the ipad

RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Unexpected behaviour upon pressing the 'Enter' key on dialog screen

Hi.
I have two dialog screens that exhibit unexpected behaviour when i pressed the 'Enter' key.
Screen 1: When I pressed the 'Enter' key, the focus shifted to another input field and the content of the previous input field is cleared. The thing is, I did not have any codes in PAI for 'Enter'. Why is this happening?
Screen 2: On load, some of the fields on this screen will be disabled. However, when I pressed the 'Enter' key, all the disabled fields become enabled. Again, I did not have any codes that handle the 'Enter' key in PAI. Why is this happening?
Any help is appreciated.

Hi Atish.
Yes, I have used CHAIN... END CHAIN.
I thought that CHAIN... END CHAIN allows my input fields to be re-activated after an error message is displayed.
How would CHAIN... END CHAIN cause the unexpected behaviour?
Thanks.

Project deleted in iPhoto 11 ver. 9.1.1 After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i

Project deleted in iPhoto 11 ver. 9.1.1
After spending three months building a twenty six page Book Project in iPhoto i added a page and later decided to delete the page. I selected the page, pressed the delete key and confirmed the delete dialog box ( i didn't read, dummy) by pressing the delete button. The whole project was gone, the undo menu was grayed out and there was nothing in the iPhoto trash about my Book.
Surly I can find this if I knew the path to find the project in a library on a back column I have of my hard drive.. Could anyone help me?

Sorry I'm having a hard time getting this.
If I go to my hard drive BIGMAC>Library>Application Support>iPhoto>the only thing in this folder is Themes.
However, when I "Get Info" it's 580MB for 24,421 items. iPhoto says I have 35,977 photos. I would think the database would be into the GB for this many photos.
If I go to BIGMAC>system>Library>I find nothing about iPhoto
Is the iPhoto file in the Application Support the one I need to replace with my backup?
Thanks so much for your help.
Jack

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. this occurrs in the internet explorer and chrome browser, but in foxfire.

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

The pressing the Shift key to make a capital letter kicks me out of gmail or reloads the current web page

I'm suddenly getting some strange behavior on my Windows 7 PC. (I can hear all you Linux users formulating witty retorts...don't do it! :-). When I'm composing an email in Gmail and press the Shift key to get caps, it kicks me out of the composition page. And nothing is saved in drafts either. Internet Explorer doesn't have this issue. The Shift key works normally. Also, If I try to paste using Ctrl+V it make the webpage text shrink. I was trying to log this issue on the computer with the problem but I couldn't login because of the caps and the paste issue.
I just discovered another quirk: If I press the Ctrl key without the +V it still shrinks the text.

Hi Matt,
Thanks for the suggestion, but there's no option to uninstall a driver. It's a MS Ergonomic 4000 keyboard and it just shows up as an HID compliant device. I tried uninstalling the Microsoft Mouse & Keyboard Control Center, but that didn't help either.
I've also pressed the keys numerous times (at one point it asked me if I wanted to enable 'Sticky Keys' which I didn't). Rebooted too. Even deleted the user profile, removed the PC from the domain, rejoined it to the domain, logged in as the user, and restored a previously backed up Transfer Wizard profile. And I checked while logged on as the local Admin and got the same weirdness.

How do I remove the space key on my keyboard for cleaning underneath?

How do I remove the space key on my keyboard for cleaning underneath?

Don't. It will void the warranty. Take is to an Apple store or an AASP and have them do it.

Somethimes no hand tool pressing the space key

Similar Messages

Maybe you are looking for