Something has changed on my iPod. When I sync it now it scrambles music between playlists. So, I will be listening to my jazz playlist when suddenly holiday music from another playlist is there. When I go to iTunes, however, the playlist is as it should b
Something has changed on my iPod. When I sync it now it scrambles music between playlists. So, I will be listening to my jazz playlist when suddenly holiday music from another playlist is there. When I go to iTunes, however, the playlist is as it should be--jazz in the jazz playlist, holiday music in the holiday music playlist. I have two iPods--one is syncing properly while the older one is not. Any thoughts?
You are currently managing your music manually. You can either sync or manage the music manually, not both. If you want to sync, all the music currently on your phone will be erased and replaced with whatever you decide to sync to it.
Similar Messages
-
my Iphone 5s was working perfectly before downloading the IOS 8.0.1 and later IOS 8.0.2. When my Iphone run out of battery, I connected it to Itunes, however the phone never turned on, and kept trying to sync, however got an itunes failure message.
Any help in this regards please.Hello douraid,
Start with the article below to get your iPhone to take a charge. Once you get it powered back on, you will want to sync again to make sure nothing was lost during the attempted sync.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G. -
How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files. -
I have tiger 10.4.11. In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher. Is there a way that I can upgrade from tiger to leopard? Help!!
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
Everytime I go to full-screen mode the photo I am working on is on one space while the filmstrip is on another. Also there is no way to get to the menu on top as it is hidden. When I hit the f key everything goes to black and I have to quite the program. This is the first time I have any problems with Aperture.
I run aperture 3 on OS X 10.7 iMac 27" 2.8GHz i7 16GB.
Thanks for any help.You have to change the cursor focus.
What I usually do for PDF pages/tabs, is click in the URL/location bar, then F11.<br />
For Flash, if you click on the page outside of the video area/box, F11 should work. -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
Since migrating from Windows 7 to Windows 8 and upgrading to iTunes 11, the latter has frozen while syncing my devices, usually while at the “determining apps to sync” stage of the process. If I am attempting to download app updates before attempting to sync, the problem normally occurs at the first “installing app x” stage. In addition, the whole iTunes experience is extremely sluggish and will even freeze while searching for a track. Everything worked fine on Windows 7. So far, I have repaired the program several times and have checked for compatibility issues, but there is no Windows 8 option in the combo box, obtained after right-clicking the icon and selecting Properties/Compatibility. As a result, I am unable to sync my devices. If I uninstall iTunes before re-installing, will this affect my iTunes libraries? Does anyone have any suggestions?
After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems. -
When I sync my iPad to download new pictures to my library, my existing library gets deleted. How can I stop this from happening?
The way I sync mine is to have an 'master' folder on my computer, and underneath it I have separate folders for the photos that I want to sync to the iPad - I then select the master folder in iTunes and the folders underneath it are synced to the iPad, each getting their own album.
There is some info on syncing folders on this page http://support.apple.com/kb/HT4236 -
Is there a way to minimize iTunes to the Sys Tray?
Is there a way to minimize iTunes to the Sys Tray?
Ignore. Figured it out! Yes. In itunes, edit/preferences/advanced. Check the boxes "show itunes in system tray" and "minimize itunes window to system tray".
-
Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.
Welcome to Apple Discussions!
You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
http://www.macmaps.com/browser.html
As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
http://www.macmaps.com/macosxnative.html
which should answer most of your other questions. If you have further questions, please feel free to ask me.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public. -
i am not able to find a playlist on my phone. i had it on the phone for months and now it is not there. i have tried to sny repeatedly and it does not show up. Help, how do I recover or get my favorite playlist back onto my phone
Hello,
While your BB may not, while in your possession, have been part of a BES environment, it nevertheless likely has an IT policy in place as this is one of the key symptoms of that fact. If it ever was part of BES, then there are specific steps that must be taken to remove the IT Policy...just removing it from BES does not remove the policy. The process to remove it is totally destructive, so be sure you back up first. Also, when you restore, DO NOT do a full restore...rather, do a selective restore of only those things you need...if you do a full restore, you will simply put that IT Policy back onto your BB and be right back where you started.
OK, so here is the procedure:
KB14202How to remove an IT policy from a BlackBerry smartphone
I always recommend Method 3 for PC and Method 4 for MAC.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Something has changed with Gmail?
I have a custom email account set up on the iPhone...incoming uses my Roadrunner pop account, outgoing uses smtp.gmail.com.
Up until tonight, I have never had the "issue" of getting a copy of my outgoing iPhone mail in my Gmail inbox. I get a copy in my Gmail Sent box, but not the inbox. It's been great. I figured it's because I'm not using a standard preconfigured Gmail account.
Now, (after the 1.01 update?) I am getting copies of my sent iPhone mail in Gmail's inbox. Since I'm not using the standard preconfigured Gmail account out of the box, I don't have the "recent" option to turn off.
Without creating the "from me" filter at Gmail, I'd love to go back to the way it was. Sometimes I do want to email myself and I'd hate to have a filter hinder that. Any ideas?
Anyone else noticing new Gmail behavior since the update?I don't know what it did before the update but I do know that I need recent mode in order to POP from multiple clients. Otherwise, when one POPs the other can't get those e-mails even though they're still on the server. To stop the sent mails from coming back to me, I setup up a filter to delete e-mails sent to myself.
-
With the new iOS 6 I have to use on my old iTouch (4th gen) instead of deleting a playlist thru the sync, I was instructed to delete it on the device. Now when I sync I am finding the playlist has been deleted from the library as well. I just want it off teh device, not erased. What am I doing wrong?
See these previous discussions:
Waiting applications: Apple Support Communities
Downloading apps stuck on waiting...: Apple Support Communities -
Is there a way to have iTunes play the first song in a playlist & then stop
We're using iTunes to play backing tracks in a show. We are using a vpedal through the USB for play and pause. We would like to be able to hit the pedal to play the first track and then have it stop ( NOT automatically play the second track). Then we could just hit the pedal to play each subsequent track. Thanks for your help
Michael - thank you so much for your effort to help me with this question. I have tried what you have suggested and it does exactly what you say it will do but does not solve the issue. Let me explain what needs to happen a little better: The playlist of backing tracks has 4 songs. The Vpedal is a third party programable device that will activate play/pause in iTunes. I will have no access (nor will anyone else) to the computer while I am in character during this part of the performance. I introduce the piece and step on the vpedal and the first song plays. If I don't hit it again, each subsequent track will play automatically - this is bad because applause, etc. makes the time between songs variable. So, currently I have to step on the pedal at the end of song #1 to pause it and then when ready for song #2 step on it again to play. The same process for end of song #2 (pause), start of song #3 (play), end of song #3 (pause) and start of song #4 (play). This works but the problem with it is I must be very precise when to pause - wait a second too late and then next song will begin. So, it would be far preferable if iTunes only needed me to press the pedal to play and the program would pause automatically at the end of each song but be ready to play the next song when I hit the pedal. Hope this makes it clearer.
Any other thoughts? Again, thanks. -
I installed iTunes to a new computer and authorized that computer but my music is grayed out. How do I get access to my music?
Is there a way to change that?
You can easily set up the iPod to automatically sync to your current iTunes library (or just do a Restore), but that will replace the iPod's existing content with content from your current iTunes library (erasing the iPod). If your old computer was "retired" gracefully and you were able to transfer its complete iTunes user data to your new computer, there is no problem because all of the songs on the iPod now are already in your current iTunes library. However, if there are songs on the iPod that are not in your current iTunes library, those songs will be lost. That may be a problem...
If you want to preserve what is on the iPod, you can try setting the iPod to Manually manage music and videos. I believe you can do that from an iTunes library that is not the iPod's currently associated library. Select the iPod in iTunes, so that you see its Summary settings screen. Check the box for Manually manage music and videos. (If iTunes puts up any warning about erasing or replacing the iPod's existing content, Revert the change and cancel out.) Click Apply. The iPod is no longer set to automatically sync. But you can add new content manually to what is already on the iPod. And the songs should not be grayed out.
However, you cannot use iTunes to transfer songs on the iPod to your current iTunes library (except for songs purchased from the iTunes Store). If there are songs on the iPod that are not in your computer's iTunes library, you should eventually "offload" those song files because your iPod can easily break, become corrupted, or get lost. iTunes syncs content in one direction only (from computer to iPod), but there are third-party methods and utilities that can transfer from iPod to computer. If you do an Internet search on something like iPod "transfer," you should get some links, including a CNET article on the topic.
Once all of your songs are "consolidated" in your current iTunes library, you can set up the iPod for automatic syncing to that library.
Maybe you are looking for
-
Apple Mobile Device Service won't install, "rolling back action"..
I reformatted my Windows Vista Home Premium (Service Pack 2 32-bit) and reinstalled iTunes. For some reason, my iPod Touch 3G wouldn't sync so I decided to uninstall then reinstall everything. When I reinstalled, however, AMDS was missing, and during
-
Parameters in select statement in JDBC Sender Adapter
Hi, Is it possible to construct a SQL select statement with some parameters (for example: #currentdate )? (for sender JBDC adapter) Thank you
-
Office mail configured on MAC Mail, messages sent out are tagged as SPAM
Hi All, This being my first question, excuse me if I have selected a wrong community for this question. Here is what I am having difficulty in configuring my MAIL client: I have configured my office mail, and when I send any message from this, the ma
-
Hi, I am just looking for some help in regards to a table of data I have. Currently I have a list of 500k Job Ids and Time Values. I have managed to identify that I have alot of duplicate job ids and I was looking to find out how i can write a query
-
Workflow Deploy Problem: No Workflows found (no error when generate)
I already tried to find other thread and test/change a couple of things already.. but i couldnt solve this basic problem yet. PLEASE KINDLY HELP. I am new to SUP and I just want to test deploying any workflow to my test device (iPhone). However, i di