Something in 10.4.6 doesn't honour DNS case insensitivity

Something in MacOS 10.4.6 Server doesn't honour DNS case insensitivity, and this is preventing users from logging into MacOS 10 clients of a 10.4.6 server.
Is there an update to 10.4.6 to fix this yet?
Does Apple plan on releasing a fix? I sure hope so since we seem to be screwed without a fix to this problem. If the answer is "fix your DNS" then we're really screwed since there's nothing technically wrong with our DNS data.
Hey Apple, help us to not be screwed by your 10.4.6 upgrade.
Thanks.
by night, sysadmin by day Mac OS X (10.4.6) users can't connect to server after 10.4.6 update

You don't need to run a DNS server on your Mac OS X Server, but you really should have working reverse DNS.
Any server in your network can perform this task. If you don't have a local DNS server then you can just fire up the built-in DNS server - a minimal configuration is all you need.

Similar Messages

  • Doing something the DAQmx way that doesn't fit? (Triggered counter on PXI 6608)

    Hi,
    I want to create a counter with my PXI6608 that is triggered with an external input, then counts up. I then want to be able to read the count in LabVIEW and hence determine the time since the trigger. I have achieved this before with old-style code, but it is not clear how to do it the DAQmx way. In particular, I can't create a task because what I'm looking to do doesn't seem to fit in with any of the pre-envisaged DAQmx task templates.
    Can anyone help? I'm assuming there's some way to create an 'empty' DAQmx task so I can fill in the details with property nodes?
    Cheers
    Lee
    Solved!
    Go to Solution.

    You'll want to make an edge count task and set the source to be one of the internal timebases using a DAQmx property node (set it before starting the task):
    The trigging functionality you're looking for is called an "arm start trigger" in DAQmx.  It's configured through a property node (also before starting the task):
    I'm not sure what you're getting at with regards to the "empty" DAQmx Task.  Typically you'll use the standard API to set typical properties and the property nodes for more advanced functionality so you'll end up with a combination of the two.  In many cases you could replace the DAQmx API with property nodes (for a fun example of this, open up the DAQmx Timing VI), but odds are you might be forgetting something important so I would always suggest using the VIs and then tacking on property nodes for additional functionality when necessary.
    If you're using LV 2012, this example should get you started (or if not, the picture still shows you what the task would look like).
    Best Regards,
    John Passiak

  • TS1741 Gmail was in my Apple ID, but they've suspended my account because they are  sure (but wrong) that I've been hacked-into, or hijacked or phished -  could explain it in 2 min. If I could talk to something that breathes  (No, that doesn't  Apple Supp

    Since Gmail is protecting me by blocking my email, and I can't change my security questions (and don't remember if said OK or Oklahoma - etc.), and Apple doesn't recognize my password, I have to come up with $30 more dollars to access my Home Sharing, iTunes. iTunes Match everything I've spent a couple of thousand dollars on I'd inaccessible.
    I've tried changing the security questions. I can't!  I've done everything explained in those FAQs, I still need email to confirm it.
    There is no solution.

    call Apple Hotline
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    or got to expresslane.apple.com

  • FCPX doesn't honour colour tags

    In trying to get around the gamma issues in Quicktime, I've been using tools like JES Extensifier to modify the 'gama' and 'nclc' tags. I was happy to find out that Quicktime files now look correct when set to the same gamma setting that they were created in, but unfortunately FCPX isn't honouring these changes. The only ones it seems to honour are the ones associated with "SD" and "HD". Anyone else have this behaviour or have a way of getting around it? This is somewhat related to my other post where the footage gets completely ruined with the "RGB" colorspace setting.

    Never mind. In what is now becoming uncommonly easy with Apple, the solution was simple. Actually, I found two solutions.
    1) Go to iTunes, find the movies in question. Enable the 'Description' column, and voila! A list of all the movies that FCPX "helped" you with. Simply highlight the entry in the description field, delete it, and that's it. It may take a restart of iTunes and/or AppleTV, but the offending descriptions are now gone from Apple TV.
    2) Found a nice little app called 'Subler'. Light, well-designed, and worked as advertised. Actually, it does a lot of other metadata editing if you need, but for me, the iTunes solution took care of it.
    Thanks Apple, more and more reasons I regret spending $300(!) on this 'professional' product.

  • Firefox android doesn't honour default actions. eg click and instagram link - other browsers will open instagram app, Firefox will go to the site

    as above

    Hi,
    Thanks for using Firefox for Android! We are working on a fix for this, so you can choose to have Firefox open the app or the web page, see https://bugzilla.mozilla.org/show_bug.cgi?id=769454
    Best,
    Michelle

  • HT5622 Whenever I purchase something.. It always doesn't work even though I have my payment info on it.. How come it always says I can't purchase? Please help me solve this so I can purchase..

    Why can't I purchase anything? Even though. I have my account info in my apple I.d..

    Contact iTunes support for help. http://www.apple.com/emea/support/itunes/contact.html

  • There's something in this picture that doesn't belong...

    I'm a brand new iDVD user and I don't understand why when I press the preview button. It only previews 3 seconds of my menu screen but the annoying music (which I plan on changing) keeps playing. Any reason why this would happen?

    Hi David:
    It sounds like you have not completed importing Slides or clips into the iDVD.
    I build my movie in iMovie then import it into iDVD. iDVD opens with the iMovie imported. You will see the main menu with a drop zone, You may add a picture here and change the text. You may also add chapters. But if you have completed all this while making your iMovie you can bypass the main menu and use the diagram button next to the play button. A window will open and you will see a diagram the first box asks you to drag your movie here if you want the movie to start playing when you insert the new burned disk in the DVD player. You want to move the contents of the third block in the diagram which is you Movie/Slideshow. Drag this box to the first box in the diagram this will make you movie start playing on insertion. You have bypassed the opening menu and your movie will play from the beginning of the iMovie with the iMovie themes. After moving your movie contents look to the lower right of the preview window and click the return button this will bring you back to the main menu. Ignore the main menu and click the burn wheel at the right of the sound slider. You should have inserted a blank DVD disk in your Mac.
    iMovie will import stills and video clips and play them as you placed them in your time line if you have added music to play with the still pictures this will play just as you added them into iMovie in track 2 or track 3 if the button has been activated for those tracks. iMovie 6 is a very good application you can change the time for the slides but video clips and menu transitions are preset. You may also add titles to slides from the edit menu. You can clip music at the play head and move or delete the sound which may overlap a video with sound so the sound will not interfere during a video clip play. iMovie files are large depending on the length of play but when you export to iDVD the file becomes much smaller. I have a 10 GB movie that when exported to iDVD became 1 GB.
    Dick

  • Trace Route Doesn't Return DNS Name

    I changed from a Linksys E4200 to a 5505 and when I use trace route, it doesn't return a DNS name for each hop.   I can see the hops shown as asterisks.  Do I have to add something to inspect for this to work?                  

    Hi,
    You could try the following. (Depending if your "policy-map" configuration is as its default settings)
    policy-map global_policy
    class inspection_default
      inspect icmp error
      inspect icmp
    Then you could add the following to your ACL attached to your "outside" interface or configure a new ACL to your "outside" interface if it doesnt yet exist
    access-list OUTSIDE-IN remark Allow ICMP return messages
    access-list OUTSIDE-IN permit icmp any any unreachable
    access-list OUTSIDE-IN permit icmp any any time-exceeded
    access-list OUTSIDE-IN permit icmp any any echo-reply
    access-group OUTSIDE-IN in interface outside
    You will naturally use the existing ACL if you have one. If no ACL exists you can use the above configuration as it is.
    Hope this helps
    Please remember to mark the reply as the correct answer if it answered your question.
    Ask more if needed
    - Jouni

  • "move" command doesn't work in case of files on network

    I setup a theWatchFolder fold on network as Watch Folder. This works like when the folder on network gets a file, I'm notified via email and the file should move from watch folder (which is on network) to theDestinationFolder (which is also on another network). I used "move" command for that but it copies the files from the theWatchFolder to theDestinationFolder but doesn't move. And there, script shows error "An item with the same name already exists in this location."
    global theWatchedFolder
    global DestinationFolder
    set theWatchedFolder to choose folder
    set theDestinationFolder to choose folder
    on idle
        tell application "Finder"
            set theDetectedItems to every item of theWatchedFolder
            repeat with aDetectedItem in theDetectedItems
                move aDetectedItem to the theDestinationFolder
            end repeat
        end tell
        if theDetectedItems ≠ {} then
            activate
            display dialog "Files for cutout were detected and moved to your " & theDestinationFolder
            tell application "Microsoft Outlook"
                set m to make new outgoing message with properties {subject:"Files For Cutout Received", content:"Hello there:
                Files for cutout received"}
                tell m
                    make new recipient with properties {email address:{name:"KK", address:"[email protected]"}}
                end tell
                send m
            end tell
        end if
        return 1
    end idle

    Hi H:
    Thanks for your help.
    I opted the Option 1 from your script. When a file arrives in Watch Folder, the script still copies to the destination folder (instead of move) and sends email successfully, and this task repeats continuously. The script is as follows:
    global theWatchedFolder
    global theDestinationFolder
    set theWatchedFolder to choose folder
    set theDestinationFolder to choose folder
    on idle
              tell application "Finder"
                        set theDetectedItems to every item of theWatchedFolder
                        repeat with aDetectedItem in theDetectedItems
                                  set a to aDetectedItem as alias
                                  set b to (move a to theDestinationFolder with replacing) as alias
                                  if a ≠ b then
                                            tell current application
                                                      do shell script "rm -rf " & POSIX path of theWatchedFolder
                                            end tell
                                  end if
                        end repeat
              end tell
              if theDetectedItems ≠ {} then
      activate
                        display dialog "Files for cutout were detected and moved to => " & theDestinationFolder
                        tell application "Microsoft Outlook"
                                  set m to make new outgoing message with properties {subject:"Files For Cutout Received", content:"Hello there: Files for cutout received"}
                                  tell m
      make new recipient with properties {email address:{name:"KK", address:"[email protected]"}}
                                  end tell
      --open m
                                  send m
                        end tell
              end if
              return 1
    end idle

  • My iPad air doesn't sleep when case is closed

    My new iPad air doesn't sleep when the cover is closed, the cover was advertised with this feature any suggestions ?

    https://discussions.apple.com/thread/5165951

  • HT5012 Why doesn't my charging case for my iPhone 5 work since updat7.0.4

    Why won't my charging case work since update7.0.4

    What brand of charging case are you referring to? Check the manufacturer's web site for answers?

  • Case-insensitive Search-Highlighting doesn't work..

    Hi,
    I've got a poblem using the character-highlighting in report regions...
    There are some html-tags in the searched data, perhaps this can cause some problems?
    They work, but they don't highlight case-insensitive...
    Where could be the error?
    Message was edited by:
    tensai

    Lucky enough the forum itself works again ;)
    Keep cool, otherwise they "improve" again the forum and it will be down for a whole week!
    In any case, this kind of posts should be directed to the Members Feedback forum... (Community Feedback (No Product Questions)

  • FileVault Doesn't Work With Case-Sensitive Journaling?

    Hello,
    I'm not finding anything on this topic via searches. Bought Leopard, erased the hard drive, installed Leopard with Case-Sensitive Journaling, and now Leopard won't enable FileVault. This is being done on a MBP bought in August 2007; another MBP running Leopard with regular Journaling, and bought in early 2006, has allowed FileVault to be enabled. Both MBPs have installed the available updates.
    SysPrefs claims FileVault requires Mac OS Extended, and Disk Utilities clearly shows that the volume is formatted appropriately, but it's not recognizing this as being the case.
    See linked screenshots.
    http://www.emoore.org/etc/FileVault.Error.1.png
    http://www.emoore.org/etc/FileVault.Error.2.png

    In general it is not recommended to use the case-sensitive file system. Not all 3rd party apps can deal with it, especially if you have two files with the same name but different cases.

  • OEM:oem agent doesn't start in case of using OS authentication.

    Dear experts!
    I've got 10gR2 and I'd like to use OS authentication (Win 2003 server). Having changed parameters os_roles=true and os_autent_prefix='' and restarted DB I tried to start OEM. Of course, I had an error of starting oem agent - "ora-01045:user dbsnmp lacks create session privilege ..." because of enabling OS authentication. But I don't know exactly how I can change DBSNMP-user from password-authentication to external-authentication. Should I create a new os-user DBSNMP? Or I should just alter existing oracle-user DBSNMP to external authentication?
    Thanks a lot in advance!
    Alexey.

    The first thing to check is that all administrator users have the "Logon as batch job" privilege under Win 2003's Security Policy.

  • Using InetAddress.getHostName() method doesn't return DNS of the machine.

    Hi,
    I have the following simple code:
    String sIP = "SOME_IP";
    InetAddress inet = InetAddress.getByName(sIP);
    sRemoteTerminalID = inet.getHostName();
    The problem is that the output I get for the 'getHostName' method is the same as the IP, while in the DNS, I have an actual name for the machine & not an IP; this happens in one of our clients environements.
    I tried also to use the 'InetAddress.getAllByName' method and analyzing all its output, but got the same results.
    - Is anyone familiar with this issue?
    - Is the 'getHostName' method requires some setting in the underlying environement so using the DNS system is actually allowed?
    I'll appreciate any hint on this.
    Thanks,
    Asaf.

    Below is the code
    I didn't see any bugs
    import java.util.*;
    //Part 1 using the  Random class print out an ArrayList of 10 random numbers
    // - use an iterator object
    public class TryArrayList
       public static void main(String[] args)
       ArrayList myNumberList = new ArrayList();
       Random intRandom = new Random();
       for (int j = 0; j < 11; j++) {
         myNumberList.add(Integer.toString(intRandom.nextInt(10)));
       System.out.println("The random values in the ArrayList are: ");
       Iterator it = myNumberList.iterator();
       while (it.hasNext()) {
         System.out.println(it.next());
         System.out.println();
         //Part 2
         //Use the Collections sort() to order the elements
         Collections.sort(myNumberList);
          System.out.println("The ordered values in the ArrayList are: ");
          Iterator i = myNumberList.iterator();
          while(i.hasNext())
             System.out.println(i.next());
          System.out.println();
          //Part 3
    //Use the Collections reverse() to reverse order the elements
    Collections.reverse(myNumberList);
    System.out.println("The reverse ordered values in the ArrayList are: ");
      Iterator iter = myNumberList.iterator();
      while(iter.hasNext())
         System.out.println(iter.next());
            System.out.println();
            //Part 5 print out the maximum and minimum values
            System.out.println("The maximum value in the ArrayList is: ");
            System.out.println( Collections.max( myNumberList));
            System.out.println();
           System.out.println("The minimum value in the ArrayList is: ");
           System.out.println( Collections.min( myNumberList));
           System.out.println();
           System.out.println("The frequency of the value 5 was");
         System.out.println ( Collections.frequency(myNumberList, (Integer)5));
    } //end of main()
    } //end of class

Maybe you are looking for

  • Query about Manual Reservation for Maintenance Order Category 30

    Hi, I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item. But in my case, that GL

  • Invalidate Adaptive Web Service Meta Data Cache?

    As the subject says - how can I invalidate the Adaptive Web Service meta data cache?  Currently, the only way we can invalidate the cache is to restart the app server, which takes quite a while. I've tried restarting the Web Dynpro Runtime service, b

  • Stock control

    Dear friends, how can i maintain the safety stock so that when issuing the material if the quantity falls below the safety stock quantity , the system should issue a message thanks

  • Why is my computer shutting down randomly

    Today I was on my mac using microsoft words i finished using it and then went to Youtube. However when i clicked the link on google chrome my mac osx automatically shut down. And now i cant turn it back on or either. I tired the power button, pluggin

  • IMovie doesn't import video shot on my iPhone 4s

    I shot some video clips of my daughter's volleyball match today and now I want to edit and share it with iMovie 11. However, I cannot import it into imovie at all. I imported all the clips into iPhoto with a sync as usual, and there they sit. I can v