Something is hijacking my cursor and returns it to the start point. Other browsers on my PC not affected.

For some time, now, at certain times the cursor returns to the start position after any character is inputted. Also, any drop down menus will not allow you to select items below the top one. This does not affect any other browser on my laptop or any other software.

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

  • In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    In adobe reader app on iPad, I have a PDF document that added notes and comments to.  Once I left the document and returned to it, the notes and comments were gone.  Where are they?  I clicked "save" and "done" buttons after I entered text.

    The application auto-saves your input when you close the document.  If you left the document, as you state, the notes/comments should have been saved and should have been visible the next time you opened the document with the Mobile Reader (note that if you are opening the document with another app such as Apple's built in PDF Viewer, things like notes/comments may not be visible).  Also note that if you are doing an Open In... from another app (like Dropbox), the version of the document in Dropbox does not update; only the version of the document in the Mobile Reader is updated.
    Would it be possible to send a video of the problem you are encountering to [email protected] so that we can try to help?

  • Urgent! Display lookup value and return value at the same time.

    We are using pop up lov.
    How can we display lookup value and return value at the same time. let me claer..
    Our lov query is like fallowing
    select dname, deptno from dept
    we want to return deptno column into a database bind text item and dname column into a display item (look up)
    can we do it (we need to do)
    thanks for your help.

    We did it .
    But pop up key lov (display description return value ) property doesn't appear for tabular forms item.
    (Report Attributes pages Tabular Form Element section display As property list)
    can we set or not.
    Thank you.

  • I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures.  For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box.

    I keep getting an intermittent error on web pages where a blue box with a question mark appears instead of pictures.  For example Facebook and Zappos would load normally on one visit, but if I visit other websites and return I get the blue box instead of pictures. If I restart the problem will go away temporarly. However, normally returnes in time.

    HI,
    From the Safari Menu Bar click Safari/Preferences then select the Appearance tab. Tick the box next to: Display images when the page opens.
    If that box is already ticked, from the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset. Relaunch Safari. If you still have problems loading images, go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
    Make sure Safari is not running in Rosetta. Right or control click the Safari icon in your Applications folder then click Get Info. In the Get Info window click the black disclosure triangle so it faces down. Where you see Open using Rosetta... make sure that is NOT selected.
    If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
    Carolyn

  • Find an iphone 5 in the club and i want you to help me find the owner and return it to the user.  its been erased and no sim card in it .when i try to configure , it says i should enter an apple  and a password.

    find an iphone 5 in the club and i want you to help me find the owner and return it to the user.
    its been erased and no sim card in it .when i try to configure , it says i should enter an apple
    and a password.

    Since it was erased and no sim card the owner probably got rid of it of some reason.

  • Often I will leave my office and return to find the fan running at max speed and the computer is unresponsive

    I also have a MacPro3,1 (2009) I believe and just started experiencing similar issues as described here.
    I have scheduled sleep and start cycles and often I will leave my office and return to find the fan running at max speed and the computer is unresponsive or I find the computer booted in to disk utility mode.
    I also often loose ethernet connectivity and have to try renewing DHCP lease several times before it will finally work.
    Has anyone found solutions for this. I have looked at the console errors right before shutdown and don't really see anything fishy. Here are the last couple of lines before it looks like it shutdown.
    12/4/14 10:08:37.447 PM xpcproxy[5066]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
    12/4/14 10:08:58.145 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.193 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.235 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.269 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.301 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:08:58.662 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:09:57.998 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:09:58.142 PM mds[38]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1085
    12/4/14 10:10:30.000 PM kernel[0]: PM notification timeout (pid 1514, Messages)
    12/4/14 10:10:31.129 PM mDNSResponder[39]: DHCPWakeTime: SCDynamicStoreCopyDHCPInfo index 0 failed CFDateRef start 0000000000000000 CFDataRef lease 0000000000000000 CFDataGetLength(lease) 0
    Any help would be greatly appreciated.
    <Re-Titled By Host>

    Mac Pro early 2009 is Mac Pro4,1, anyway, I think you need to boot into recovery mode, launch Disk Utility, then select startup volume and run repair disk.
    Xcode is the latest one, by the way?

  • Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?

    Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?

    I don't have the same version of OS X here but try System Preferences>Keyboard. Is there an option similar to "Use the F1, etc, keys as standard function keys"?
    If so, and it has a checkmark, uncheck it & see if that does the trick.
    ~Lyssa

  • How do i reverse an application i downloaded and return it to the previous verion of the application

    how do i reverse a new application i downloaded on the i phone 5 and go back to the previous version i had. I am not using IOS7

    You'd only be able to do that if you had the previous version stored in your iTunes library, on your computer. If you do, just delete the app & all data on your phone, then sync the previous version from your iTunes library. If you don't have the previous version, well, you can't.

  • I have uninstalled iTunes from an XP laptop and I now get the iTunesHelper Error2 screen (Apple Application Support was not found).

    Hi All,
    I have uninstalled iTunes from an IBM ThinkPad X40 running XP and I now get the iTunesHelper Error2 screen (Apple Application Support was not found). I do not want to re-install iTunes as I am now a mac user. However I want to get rid of the message from the XP machine as it is irritating and I want to use it standalone for something else.
    Any ideas?
    Cheers,
    Southcote

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes. You can skip the reinstallation.
    tt2

  • HT5934 My iMac won't let me drag, and drop anything from the desktop to other files on the desktop, or anywhere else.

    My iMac won't let me drag, and drop anything from the desktop to other files on the desktop, or anywhere else.

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404).  I have re-installed 10x and still no luck.  iTunes will not sync with my iPad.  Can anyone hel

    I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed.  Please re-install iTunes (-42404)".
    Since this, my iPad will not sync, despite resetting it many times.
    I have downloaded and installed the new iTunes more than ten times with no luck.
    Please can anyone help!!!!!!!

    Let's try a repair install of iTunes first.
    Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
    Can you launch your iTunes now?

  • I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

    I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

    You could try using the DNG converter 8.7 on Windows vista:
    <Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
    <Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
    You then need to watch this video to get hang of it:
    <Camera Raw: How to use Adobe DNG Converter - YouTube>
    Hope this helps.

  • I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps

    I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps are so that i can update them. Please give some solutions please

    isthisonetaken wrote:
    I'm having this problem. It started yesterday. I have 2 updates, but when I open the App Store, they won't appear.
    Do you have apps purchased with a differnt AppleID?
    For example, mine shows 12 updates but only 2 show up as being available.
    The others are on my daughters account.
    I log out of my iTunes account and log in with hers and those updates show up.

  • I try to install LR CC in Creativ Cloud (10 times)  on Mac and as propose I logout from iCloud and login again. The Start Icon shows for short time an that is all.....is a deinstallation from the old LR necessary?? Or what is to do. Daniel Berne

    I try to install LR CC in Creativ Cloud (10 times)  on Mac and as propose I logout from iCloud and login again. The Start Icon shows for short time an that is all.....is a deinstallation from the old LR necessary?? Or what is to do. Daniel Berne

    Reboot the computer once.
    Sign out from Creative Cloud and Sign in .
    Important : Try to launch Lightroom CC apps from Apps tab menu. :
    Still same issue ? let me know .

Maybe you are looking for