Something is wrong with the bottom cover

The bottom cover, I mean this one which protects sim card from water, is broken. I close it every single time but it still keep opening... Not completely but it comes off a little bit. What should I do? Should I give my Xperia for the warranty?

I'm sorry to hear that.
I suggest that you raise this with your local support team to proceed with this in the best possible way.
Local support.

Similar Messages

I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy, after a minute its just white. What to do?

I have a PowerBook 145B but something is wrong with the systemfolder so it wont boot. I've downloaded System 7.0.1 from Apple and put it on Floppys with my Macintosh Classic. The PowerBook boots from the floppy but after a minute it just comes up a window thats completely white.
I've tried a lot of things, but my Macintosh classic (with original floppys) runs 7.0.0. And the PowerBook needs atleast 7.0.1 and did run 7.1.0 as original OS.
How do I fix this?

Because your PowerBook 145B shipped with OS 7.1, it can't run an earlier version of the Mac OS, such as 7.0.1. Unfortunately, Apple never made OS 7.1 available for download. You can run OS 7.5.1, 7.5.3, and 7.5.5 on your PowerBook, but I'd recommend doing so with the maximum amount of supported memory - 8 MBs. The 19-part download of OS 7.5.3 is segmented, so that each one will fit on a 1.44 MB floppy disk. The problem is that the 19-diskette set isn't an installer set as such, having no bootable disk. It's solely intended to be used to transfer the individual segments to the resident hard drive in the computer. Once that's done, double-clicking the first .smi segment creates the OS 7.5.3 installer disk image on the desktop, which you drag onto the hard drive icon. This produces a folder with the OS 7.5.3 installer in it. I've done this before with an old Mac LC and it works. You can also download the 3-diskette OS 7.5.5 Update and run that. These downloads can be found on the same page where you found the OS 7.0.1 download: Older Software Downloads.

Index.php "Something is wrong with the XAMPP installation :-("

Hello Brian Woods, Dave Powers, and Other Experts.
I am new on the block as far as Wordpress and trying to run a testing server using XAMPP via Dreamweaver CS5. I carefully followed all the directions in your tutorials:
http://www.adobe.com/devnet/dreamweaver/articles/setup_testing_server.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_wordpress_pt2.html
Brian, everything worked up until I reached the following step under the topic of: "Testing code hinting"
After I open the "index.php" file, I received the following error in Dreamweaver CS5:
"Something is wrong with the XAMPP installation :-("
Again, I carefully followed all the instructions and everything up until now works: the Theme loads up fine, XAMPP works, and I can view the control panel fine in Wordpress.
Does anyone have any ideas?
Thanks for your support.
DELL INSPIRON LAPTOP CORE 2 64 BIT 2.0 GHZ
4 GIG RAM
WINDOWS 7 PREMIUM

Steak&Lobster wrote:
After I open the "index.php" file, I received the following error in Dreamweaver CS5:
"Something is wrong with the XAMPP installation :-("
That's a new one on me, but I very much doubt that the error message was generated by Dreamweaver, because DW is designed to work with any testing server. It's not tied to using XAMPP. Sounds like some weirdness from XAMPP. I must say that XAMPP 1.7.4 seems to have a few bugs.

I cant pass my song to my ipod, something is wrong with the song?

i cant pass my song to my ipod, something is wrong with the song?

To find questions that you have posted or replies that you have posted to questions asked by other users on this forum
#sign-in to the forum with your user name and password
#*click "Sign In" in the upper right corner of this page --> https://support.mozilla.com/en-US/questions/
#after the page has reloaded, click "My Contributions" on the line just above the first question listed; the page will reload with only links to your questions/replies
#when done, click on "All" just above the first question listed, to return to a list of all forum questions
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Hi! i bought my earpods several months ago and something's wrong with the control, i want to replace it with a new pair but i lost my receipt

hi! i bought my earpods several months ago and something's wrong with the control, i want to replace it with a new pair but i lost my receipt

Image persistance on Apple displays:
http://support.apple.com/kb/HT5455
Apple say this about LCD screen burn in:
http://support.apple.com/kb/HT2807
which includes suggestions for curing that effect.
Alternatively:
How to fix screen burn and/or stuck pixels on an LCD monitor:
JScreenFix
http://www.jscreenfix.com/basic.php

Photoshop CC - Something is wrong with the grey's.

Photoshop does not seem to be showing colors (specifically grey) correctly. To test this i got a grey scale image off google and put it in PS, and instead of being grey scale, its more like a "tan scale" for lack of a better term.
Note the bottom image is just a separate window, then took screenshot with gyazo.
Is there a way to fix photoshop so it will display colors correctly?

Is the bottom image perhaps being displayed in a non-colored-managed application? If so, your monitor profile is hosed.
Calibrate and profile your monitor.
[«EDITed typos»]

My anti spyware pops up once a week telling me that something is wrong with the plugin container and that its logging keystrokes. I was wondering what to do because I'm scared of getting keylogged.

My anti spyware keeps telling me my plugin container is logging keystrokes and I'm scared of getting keylogged
== This happened ==
A few times a week
== im not sure

Your AV/AS application is giving you a "false positive." Contact your AV/AS vendor to report the problem so that they can fix the incorrect signature in their database.
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

HT1414 I am unable to install a newer version for my Iphone 4S error tells me something was wrong with the network?

I am unable to update my software to a newer version. I keep getting an error message stating there is a problem with the network? I am using my verizon internet service to update and it's not letting me?

Are you doing through the phone, or itunes? What version of ios are you running now?

Something's wrong with the colours and transparency in iWeb?

Hello
I am building a site with specific colors from the RGB scale and when I publish, the color has different shades. Same problem happens with the % of the color's transparency; on Safari it looks washed out with ugly stripes and shades. Any bug suspicion?
Thank you
Isabelle

Websafe colors are from an era when monitors only could display 16 or 256 colors.
Unless you have a visitor who still uses such monitor, you can safely use all 16 million colors.
About the textbox
iWeb uses the textbox in the Header layer of an iWeb page as the title in the browserwindow.
Do not remove the original textbox, as you cannot replace it other than by selecting another theme and then change it back to the original theme again. Ruining the layout in the process.
If the textbox in the Header is missing, iWeb uses a textbox down the page in the Content layer. If that textbox is also missing, it uses another textbox. If that fails it uses the pagename in the Sidebar.
Sometimes you may want a different text in the titlebar and not display it on the page itself. Or not display it at all.
So use that textbox in the Header layer. Type your text. Then select the textbox. In the Inspector choose T, click a color to open the color palette and drag the opacity slider to 0 (zero).
Do Command-T to open the font palette and make the font smaller. (Or do Command--(minus)) Also use a font that doesn't change to an image. Arial is a good font. Perhaps do it first before making the text invisble.
Resize the textbox. You may want to change the height of the Header layer.
Do Command-Shift-B to move the textbox to the back, possibly behind other objects.
Next add a optional second textbox to the Header layer and use that one to display text on the page.
If you want to move the textbox to the front again to make changes, but can't remember the location on the page, drag the area with the mouse to select the objects.
Deselect objects you do not want to move forward by Command-dragging the mouse over these objects.
Next do Command-Shift-F to move the textbox to the front. Repeat the steps in reverse order to make the text visible.
Practice.

Something is wrong with the display

I turned on my nano today and noticed that the text looks like if my printer is running out of ink. None of the letters are fully visible and the colors are almost gone. What happened? Please help!

Hi keiser,
I would start with the 5 R's:
http://www.apple.com/support/ipod/five_rs/
Maz

Something's wrong with the screen.

Can you see the dark areas on the right side of the screen? What do you think they are? Should I replace it? It bothers me a lot.

I've noticed this on my screen as well, but I also have faint white lines going down the screen. I'm wondering if this is from the cover and/or screen protector. The lines are in exact spot where the space between the magnets are on the cover. I have the Ghost Armor screen and the Joy Factory Connect the Dots cover. It has black interior....might be rubbing off onto screen? I don't like it either....what kind of cover and or screen protector do you have? Let me know if you go to Genius Bar (and what they say). Thanks!

Something 's wrong with the linked files

I have a web movie with 6 linked images; if i publish with
director mx, they load perfect; if i publish with the director 11
versión, they don't load. I think the problem is with the
path, but i can't find where. any idea?
sayeg

I think i found the answer. but i need ideas, please.
sayeg

Something is wrong with the Xserve forum

Hey Guys,
For some reason other questions are landing in the xserve forum with the title HT1349
Any idea on this?
Do the forums have a support email?
https://discussions.apple.com/community/servers_enterprise_software/xserve_and_s ervers

Only the Hosts have such ability; none of us users can move, delete nor edit posts. I've asked the Hosts to clean up the forum if and when they have time. They do try to keep an eye on such things, but there are very few Hosts and thousands of posts to have to sift through.
Regards.

Something is wrong with the claimed speed of GE70 2oe, can't be dual sata 3 port

Hi! I have bought a msi ge70 2oe with the 2 msata sandisk u100 64gb drives. One thing i just can't understand is the perfomance of the ssds. I mean its far better then hdds, but it can't be running on dual sata 3 6gbits ports. I just hope someone can confirm that it's actually 2 sata 2 3gbits ports. I have made a clean install of windows 8 with the intel rst drivers, everything is running smooth but the scores on the new haswell refresh is not close to (double) sata 3 raid speeds, i just can't understand why they stuck with dual sata 2 speeds.
I've just purchased a couple of intel 525 180GB msata ssds for more space for games and better write and random speeds. But i'm dissapointed that msi say it can run at 900 MB and over. Hdtune pro is not reliable for testing ssds, so here are my crystaldiskmark sandisk raid score.
please post if you have better results
CrystalDiskMark 3.0.2 x64 (C) 2007-2013 hiyohiyo
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 471.836 MB/s
Sequential Write : 274.460 MB/s
Random Read 512KB : 181.330 MB/s
Random Write 512KB : 70.838 MB/s
Random Read 4KB (QD=1) : 12.992 MB/s [ 3172.0 IOPS]
Random Write 4KB (QD=1) : 13.544 MB/s [ 3306.5 IOPS]
Random Read 4KB (QD=32) : 58.236 MB/s [ 14217.7 IOPS]
Random Write 4KB (QD=32) : 13.899 MB/s [ 3393.3 IOPS]
Test : 1000 MB [C: 28.7% (34.1/118.7 GB)] (x5)
Date : 2013/08/05 0:07:05
OS : Windows 8 [6.2 Build 9200] (x64)
Marten

I have a GT70 0NE with a Super Raid setup and 2 x 119 GB SSD but I got much worse than you in 4KB (Queue Depth 1) test.
But read speed generally higher than your original result.
CrystalDiskMark 3.0.2 Shizuku Edition x64 (C) 2007-2013 hiyohiyo
Crystal Dew World : http://crystalmark.info/
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 830.621 MB/s
Sequential Write : 200.992 MB/s
Random Read 512KB : 129.346 MB/s
Random Write 512KB : 103.751 MB/s
Random Read 4KB (QD=1) : 2.744 MB/s [ 669.9 IOPS]
Random Write 4KB (QD=1) : 2.654 MB/s [ 648.0 IOPS]
Random Read 4KB (QD=32) : 235.678 MB/s [ 57538.5 IOPS]
Random Write 4KB (QD=32) : 33.457 MB/s [ 8168.1 IOPS]
Test : 1000 MB [C: 57.6% (137.0/237.7 GB)] (x5)
Date : 2013/08/14 8:34:24
OS : Windows 8 Professional [6.2 Build 9200] (x64)
Possibly I need to update IRST too. Funnily when I turned off antivirus and torrent speed is going down (really reduced speed) and comparable to yours.
EDIT:Retry again by waiting the disk temperature going down
CrystalDiskMark 3.0.2 Shizuku Edition x64 (C) 2007-2013 hiyohiyo
Crystal Dew World : http://crystalmark.info/
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]
Sequential Read : 835.519 MB/s
Sequential Write : 172.378 MB/s
Random Read 512KB : 116.470 MB/s
Random Write 512KB : 96.834 MB/s
Random Read 4KB (QD=1) : 18.365 MB/s [ 4483.7 IOPS]
Random Write 4KB (QD=1) : 21.347 MB/s [ 5211.6 IOPS]
Random Read 4KB (QD=32) : 148.393 MB/s [ 36228.9 IOPS]
Random Write 4KB (QD=32) : 34.984 MB/s [ 8541.1 IOPS]
Test : 1000 MB [C: 57.6% (137.0/237.7 GB)] (x5)
Date : 2013/08/14 9:24:53
OS : Windows 8 Professional [6.2 Build 9200] (x64)

I just tried to update Itunes. Something went wrong with the update and now itunes won't open

I was notified of an update to itunes when I opened it on my PC this morning. I agreed to the update. The update did not finish and now I can't open itunes on the PC. I tried "repair" in the control panel to no avail. HELP!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Something is wrong with the bottom cover

Similar Messages

Maybe you are looking for