Something Missing on my K7N2 Delta2 Platinum

Hi, The Board Works great not a problem so far, but theres something missing, in the package came all the stuff mentioned on the manual and on the webpage of the board, but there's no way to know the combination led info of the D'Braket 2, I have search everywere and no sings of that info, the boar came with two manuals one is the User's Guide and the secod is the Test Report, and some other paper about the Spects of the board and info about the Core Cell capabilities but no sings of the D'Bracket2 Definition Leds inf, I wonder if any of you have this datashet becouse having a D'Bracket2 whitout the definition of the led combinations is like Having a pece of junk that shines so I could use your'e help on this by the way, I have read in other post that all the led combinations are different deppending on the model of the board so, keep in mind that the board in question is a MSI K7N2 Delta2 Platinum.... cya

https://forum-en.msi.com/index.php?topic=34535.0

Similar Messages

[nForce] K7N2 Delta2 Platinum w/Version B.5 BIOS, trouble with post and XP install.

I have
K7N2 Delta2 Platinum
MS-6570E Version 1.0 motherboard
AMD Sempron 2600+
Elixir 500MB PC-3200 DDR (3 sticks, total 1.5GB)
eVga Nvidia MX4000 64MB AGP card
Maxtor ATA-100 PCI controller
I pulled everything else out of the box. I've tried the B.3, B.4, and B.5 BIOS and set everything to Optimized Defaults. I created a striped RAID Array of 4 WD 80GB drives on the primary and secondary onboard controller. The CD is on the Maxtor controller.
There are some problems I can't figure out.
1) The mobo identifies the CPU as Athlon XP 1100
2) The POST hangs just before seeking the IDE drives. I have to hit a key for it to continue.
3) The LED's on the D bracket have the top right light dark until the key is hit. Something to do with initializing the floppy controller.
4) The XP install fails to a blue screen just after hitting the F8 key to accept the license. The code is 0x0000007B.
Can someone tell me what these issues have to do with each other and how I can correct them?

Quote from: dmichael34 on 17-September-05, 22:42:56
The Maxtor controller was removed when you originally suggested to do so. The add on controller is an SIL 680 RAID.
I will try reseating the processor next.
I can also attempt a boot through POST without the array, as this shouldn't affect the boot process.
I did notice that the ctrl-alt-del on the LEFT side of the keyboard doesn't work.
However, the ctrl-alt-del on the RIGHT side of the keyboard does work.
Maybe I've been looking for a serious problem and overlooking the obvious.
I do not see how the CPU temp would cause a pause at boot until "any key" is hit... it sounds more to me like the system has paused to either look for a device or boot a BIOS on a device card.
If I am not mistaken, you are using a RAID card to boot windows? Is this correct?
If that is true it is possible the boot sequence is not set correctly in the BIOS such as "BOOT OTHER DEVICE" ( I cannot remember the exact term in the BIOS)
I am not sure about that but you could try changing the boot sequence so your RAID card is above "HARD DISK" on the list

MSI K7N2 Delta2 Platinum + Boot problems.

System Setup, so far:
MSI K7N2 Delta2 Platinum
Athlon XP 3000+ Barton, 333FSB
Thermal Take Volcano7+ Fan
PowerColor Radeon 9800Pro, 128MB
GeiL 1x512MB, PC3200, DDR400
Antec True Blue 480W
Max: +5V=38A | -5V=0.5A | +12V=28A | -12V=1.0A | +3.3V=30A | +5V SB=2A
Min: +5V=0A | -5V=0A | +12V=0.8A| -12V=0A | +3.3V=0A | +5V SB=0A
The problem is, that the screen is blank and there's no error beeps, when I fire up the system.
The D-bracket keeps giving me the 1-0-0-0 (Early Chipset Initialization)
So far I have tried:
Reseat the CPU, didnt help. (This is the 2nd (or 3rd) CPU on this board)
Tried diffence slot, for the memory.
Tried another memory type.
Tried another GFX.
In every case, the D-bracket gives me the 1-0-0-0.
Just tried to fire up the system, without the CPU/MEMORY/GFX, and still I get the 1-0-0-0 (Early Chipset Initialization)
Is the mainboard dead then?
Does anybody know of a solution, to this problem? Or any ideers at all?
Thanks
Gismo1, Denmark.

Hi there ...
I have more or less the same problem here
I have an old trusty K7t Pro V1 motherboard . I installed an IBM Deskstar drive ,
The mother board started to boot but hang on the IDE part .
re-booted and all I get now is the system beeping all the time , with red green red red ... (looking from top to bottom)
I got anothe board from ebay , installed it . all ok untill I connected my IBM Drive again , Now the same
Just beeps fast , and red green red red .. (looking from top top bottom)
Looks like some bhow this crap disk has blown something on my board ,
I think I have tried everything .
Anything I should try before binning it .
Yes the cpu is ok
Memory is ok
Thanks lads
Just wished my first post could have been a happier one

@Klondike K7N2 Delta2 Platinum, new owner.

Hi.
I am kinda old but maybe not as old as you . Experience before...
Much regard to your efforts for writing some exhaustive information on the MSI K7N2 Delta2 Platinum. I think I would be more than completely lost without your help http://www.nforcershq.com/forum/here-vp624299.html#624299. Now at least my system is running.
I have some specific points, and please forgive me if I'm asking something you may have answered. Got kids running around, that kind of thing. Have to run out and pick up milk in a minute, life is busy, you get it... sure? Any links are helpful too.
The existing server had an XP software raid (hack some dm* files a bit, there is a toms hardware article on it here http://www.tomshardware.com/reviews/windowsxp-make-raid-5-happen,925-2.html on a Shuttle AN35 Ultra 400 and a Barton Athlon XP 2600+ 0343.
But it's a barebones board so I thought I would 'Upgrade' the file server with an 'everything' board. Enter the K7N2 Delta2 Platinum. Enter also a 0310 2500+ which I patched the mobile jumper for fun and cut all of L6. The NFORCE2 seems to ignore these settings, and swapping in the 2600+ completely stock doesn't seem to change anything below:
Questions I have which I have not got answered yet (and running 1/20/2005 bios the board came with): I can't adjust the vCore! I can only set it in the bios but not in Windows, where I have 8rdavcore - this dynamically lowered my FSB and vcore when the system was idle. 8rdavcore lists the board but there is no driver in the drop-down: this is not the giveio.sys driver mentioned on the home page, it is a driver to interface with the vcore and other settings on the board.
With your recommendations klondike the system at least boots reliably. Already I am disappointed in the MSI versus the Shuttle for this reason alone, no vcore and the settings seem really picky in the MSI Bios. The shuttle though had a periodic problem with crashes which I never figured out. LC 6420GP 80plus PS, ATI 9250 AGP, Team Value memory (identical in timing to the Value memory in your post Klondike), 3ware 9500S-8 hardware raid, NEC USB 5 port USB card and a 3com 10/100, all moved to the new system, with the 3ware newly introduced replacing the software raid. Removes the annoying rebuild when the system crashes out, prevents major disk data glitches.
I want this system to dynamically underclock, but as yet, I cannot adjust the vcore down. For example, Corecenter, or nTune, has the field for vcore and other values, but except for FSB, they are locked, and 8rdavcore log shows it cannot load the driver. The Shuttle went to under 100 fsb with a low voltage dynamically, I think vcore 1.25 with the Athlon XP Barton 2600+, and run super-cool and use about 75 watts of power vs 110w.
Any ideas?

Came back to the machine, swapped back in the Athlon XP Barton 2600+, took a look in the BIOS (don't know if I changed anything, probably), and now the vCore is greyed out again in 8rdavcore. "No ATXP1 found."
Edit: I used the CMOS jumper to reset settings several times to no effect.
Sorry I did not get the log when it was working. I will next time! I assume where it says "not responding" has something to do with the problem.
Here is the log from 8rdavcore:
Code: [Select]
00/24 16:36:50 | ===============================================
00/24 16:36:50 | 8RDAVCORE: Version 8rdavcore 0.8.8-dev8
00/24 16:36:50 | 8RDAVCORE: Windows NT/2000/XP detected
00/24 16:36:50 | giveio: Opened Service-manager successfully
00/24 16:36:50 | giveio: Service giveio exists
00/24 16:36:50 | giveio: Service giveio is running
00/24 16:36:50 | board: Found section General
00/24 16:36:50 | board: Found section Abit KT7A
00/24 16:36:50 | board: Found section Abit NF7
00/24 16:36:50 | board: Found section Acorp NFU400N
00/24 16:36:50 | board: Found section Aopen AK79D-400VN
00/24 16:36:50 | board: Found section Asus A7N8X-E
00/24 16:36:50 | board: Found section Asus A7N8X v2.0 Deluxe
00/24 16:36:50 | board: Found section Chaintech CT-7NJL1/CT-7NJS
00/24 16:36:50 | board: Found section DFI Infinity NFII Ultra
00/24 16:36:50 | board: Found section DFI Lanparty NFII Ultra
00/24 16:36:50 | board: Found section Epox EP-8RDA+ Rev. 1.x
00/24 16:36:50 | board: Found section Epox EP-8RDA+ Rev. 2.x
00/24 16:36:50 | board: Found section Epox EP-8RDA(3,6,+,I,E)
00/24 16:36:50 | board: Found section Gigabyte GA-7N400 Pro
00/24 16:36:50 | board: Found section Gigabyte GA-7NNXP
00/24 16:36:50 | board: Found section Jetway N2PA
00/24 16:36:50 | board: Found section Leadtek K7NCR-18D
00/24 16:36:50 | board: Found section MSI K7N2 Delta L
00/24 16:36:50 | board: Found section Shuttle AN35N Ultra V1.1
00/24 16:36:50 | board: Found section Shuttle SN45G
00/24 16:36:50 | board: Found section Soltek 75FRN(2)-L
00/24 16:36:50 | board: Found section Soltek NV400-L64
00/24 16:36:50 | SMI: Got IO base 0x4400
00/24 16:36:50 | SMI: Back-to-back writes disabled.
00/24 16:36:50 | smi: Function code not set, forcing to 0x88
00/24 16:36:50 | SMI: Not responding.
00/24 16:36:50 | 8RDAVCORE: Using board MSI K7N2 Delta L
00/24 16:36:50 | nforce2_smbus: 1.1: 0x8410de
00/24 16:36:50 | nforce2_smbus: Address of bus 0 is 0x5000
00/24 16:36:50 | nforce2_smbus: Address of bus 1 is 0x5100
00/24 16:36:50 | 8rdavcore: Init SMBUS drivers done
00/24 16:36:50 | atxp1: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS0
00/24 16:36:50 | atxp1: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS1
00/24 16:36:51 | atxp1: No ATXP1 found
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | 8rdavcore: Init voltage drivers done
00/24 16:36:51 | nforce2-pci: Revision c1
00/24 16:36:51 | 8rdavcore: Init chipset drivers done
00/24 16:36:51 | WINBOND: Found a W83627THF
00/24 16:36:51 | ite: ITE8712F found
00/24 16:36:51 | ITE: 16-bit fan counter 0x3c
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | SMI: Not responding.
00/24 16:36:51 | lm90: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS0
00/24 16:36:51 | lm90: Searching on NFORCE2_SMBUS:NFORCE2_SMBUS1
00/24 16:36:51 | lm90: No LM90 found
00/24 16:36:51 | 8rdavcore: Init sensor drivers done
00/24 16:36:51 | smart: Physical drive 0 opened
00/24 16:36:51 | smart: SMART enabled on drive 0
00/24 16:36:51 | smart: Physical drive 1 opened
00/24 16:36:51 | smart: SMART_GET_VERSION failed
00/24 16:36:51 | smart: Physical drive 2 opened
00/24 16:36:51 | smart: SMART_GET_VERSION failed
00/24 16:36:51 | smart: Physical drive 3 opened
00/24 16:36:51 | smart: SMART_GET_VERSION failed
00/24 16:36:51 | smart: IDE drive 0
00/24 16:36:51 | smart: Model: ST3750640AS
00/24 16:36:51 | smart: Firmware: 3.AAE
00/24 16:36:51 | smart: Serial: 3QD14TMH
00/24 16:36:51 | smart: Buffer: 16777216 Byte
00/24 16:36:51 | smart: Available attributes (F=Pre-Failure, O=On-Line, P=Performance, E=Error-rate, C=Event-Count, S=Self-Preserving):
00/24 16:36:51 | smart: ID Name Value Worst Threshold Raw Flags
00/24 16:36:51 | smart: 1 Raw Read Error Rate 117 91 6 158 FOPE
00/24 16:36:51 | smart: 3 Spin Up Time 94 93 0 0 FO
00/24 16:36:51 | smart: 4 Start Stop Count 100 100 20 102 O CS
00/24 16:36:51 | smart: 5 Reallocated Sector Count 100 100 36 0 FO CS
00/24 16:36:51 | smart: 7 Seek Error Rate 72 60 30 153 FOPE
00/24 16:36:51 | smart: 9 Power on time 100 100 0 195 O CS
00/24 16:36:51 | smart: 10 Spin Retry Count 100 100 97 0 FO C
00/24 16:36:51 | smart: 12 Power Cycle Count 100 100 20 106 O CS
00/24 16:36:51 | smart: 187 Unknown 100 100 0 0 O CS
00/24 16:36:51 | smart: 189 Unknown 100 100 0 0 O ECS
00/24 16:36:51 | smart: 190 Unknown 63 54 45 37 O S
00/24 16:36:51 | smart: 194 Temperature 37 46 0 37 O S
00/24 16:36:51 | smart: 195 Hardware ECC Recovered 81 61 0 207 O EC
00/24 16:36:51 | smart: 197 Current Pending Sector 100 100 0 0 O C
00/24 16:36:51 | smart: 198 Offline Uncorrectable 100 100 0 0 C
00/24 16:36:51 | smart: 199 UDMA CRC Error Count 200 200 0 3 OPECS
00/24 16:36:51 | smart: 200 Write Error Count 100 253 0 0
00/24 16:36:51 | smart: 202 Unknown 100 253 0 0 O CS
00/24 16:36:51 | 8rdavcore: Init SMART drivers done
00/24 16:36:51 | pnp: Detected W83627THF
00/24 16:36:51 | pnp: Registers are unlocked
00/24 16:36:51 | pnp: GPIO config: 0x40, 0x40, 0x00, 0x00, 0x00
00/24 16:36:51 | pnp: LD7: CR30=0x0f, 0xf0, 0xff, 0x0b, 0xff, 0xff, 0x00
00/24 16:36:51 | pnp: LD8: CR30=0x01, 0xff, 0x5e, 0x00
00/24 16:36:51 | pnp: LD9: CR30=0x00, 0xff, 0xff, 0xff
00/24 16:36:51 | cpuload: thread created, id: 208, update: 5000
00/24 16:36:51 | autofsb: autofsb_load(): Added AutoFSB1
00/24 16:36:51 | autofsb: autofsb_load(): Added AutoFSB1.2
00/24 16:36:51 | 8rdavcore: Chipset reported multiplier: 115
00/24 16:36:52 | 8rdavcore: Calculated multiplier: 114
00/24 16:36:52 | 8rdavcore: init_values done
00/24 16:36:54 | 8rdavcore: Using driver
00/24 16:36:54 | control: control_set_val(): POSSIBLE BUG: Got a NULL pointer
00/24 16:36:54 | 8rdavcore: Init control startup values done
00/24 16:36:54 | 8rdavcore: Create sensor list done
00/24 16:36:54 | 8rdavcore: Create preset list done
00/24 16:36:54 | 8rdavcore: Create AutoFSB list done
00/24 16:36:54 | 8rdavcore: Create trigger list done
00/24 16:36:54 | 8rdavcore: Create sensor field done
00/24 16:36:54 | 8rdavcore: No primary VCore control!
00/24 16:36:54 | 8rdavcore: Create voltage list done
00/24 16:36:55 | 8rdavcore: Create SMART list done
00/24 16:36:55 | 8rdavcore: AutoFSB disabled
00/24 16:36:59 | control: control_get_val(): POSSIBLE BUG: Got a NULL pointer
00/24 16:36:59 | 8rdavcore: Saved Main vars
00/24 16:36:59 | 8rdavcore: Saved sensor settings
00/24 16:37:00 | 8rdavcore: Saved presets
00/24 16:37:00 | 8rdavcore: Saved autofsb settings
00/24 16:37:01 | 8rdavcore: Saved log settings
00/24 16:37:01 | 8rdavcore: Freeing lists...
00/24 16:37:01 | Done.

Does K7N2 Delta2 Platinum has nvfirewall?

Hi I have a question.
I a few post I have seen that this board the K7N2 Delta2 Platinum has NVFIREWALL that means that has a hardware Firewall but the problem is that in the three months having it I haven't seen it, I try to install the NAM setup program (Nvidia ForceWare Network Access Manager) in the Ethernet folder of the nForce 5.10 Drivers and allways appears an error related in some User name problem, but the moust conserning (sorry for my english) thing is that with the last version of the drivers the problem was the same thing some user name is not a valid name os something like that, so I want to know if it the K7N2 Delta2 Platinum has or not nvfirewall? right at this moment I'm downloading the beta drivers of the nForce the v6.11 I hope I can installed this time.... :..( Btw: I don't know if some of you owners of the K7N2 delta2 Platinum saw the review on madshripms
http://www.madshrimps.be/?action=getarticle&articID=216 ... becouse in section 5 core center & live updated, they show a pictre of the Nvidia nForce Networking Controller ( in the system hardware management) the one shown on the photo shows a colourfull management of the reach features of the Ethernet controller but in my system the management is less colourfull, and I wonder if the board reviewed was the same as all the K7N2 Delta's2 Platinum. I hope someone that has this board or has experiences with it help us with this doubts.
Hy sorry for this big post but somehow I have to make my selft understand, and sorry for my english but here in Latin America we don't speak it to much jejeje.

Thanks for your help, I managaged to install the nvfirewall soft with the Beta nForce Drivers v6.11, I didn't install any drivers I only installed the NAM and istalled perfectly, I wonder wy some dude from MSI TW, from technical support say to me on a replay of an e-mail that the K7N2 Delta2 Platinum Based on the Nvidia nForce2 MCP GB plataform don't have nvfirewall, I don't remember quite well what he told me but that was the main reason for the post here, and is quite suspisius that the v5.10 and older are having a lot of problems with the nvfirewall, but well now I have it and now I can say that I managaged to install all the K7N2 Delta2 Platinum features....
BTW: My System is on a Windows XP SP2, connected bia cablemodem Motorola SB5100 whitout router totally free of external firewall, only cablemodem and ISP.
and the two last atemps of installing the 5.10 drivers were on fresh installs of Windows XP SP2.
Thanks for youre help youre great.

K7N2 DELTA2 PLATINUM - Sound Probs, Very Strange

OK, i bought a brand new K7N2 DELTA2 PLATINUM and it works great, except from the sound which installs and in the system devices it is registered as there without yellow explanation or red cross. Is set to auto not disable in cmos.
When I try playing something it plays but no sound actually comes out. I have checked the front port switch and accourding to the manual (which was wrong over clearing the cmos, thanks guys for helping me solve that) is fine. Cab even adjust volumes in the volume control in windows.
I have tried various different drivers including the included ones and various of the internet. I have the mid Jan versions of all nforce drivers.
Everthing else on comp works fine, though if i leave the computer unplugged at mains for more than a few secs, when i switch back on the keyboard or mouse (ps/2) do not respond and all the light of the keyboard are on whether the computer is on or not. This is solved by unplugging and plugging back in mouse and keyboard.
I have also borrowed a pci card from someone and it works fine.
Please help, suggestions would be much appreciated
Note, other thing is that it is a Realtek ALC650 chip officially though something came up on a program listing system stuff that it s an ALC655; just thought i would include.

Quote from: Dr Stu on 01-February-06, 05:09:51
good idea to try knoppix
if knoppix does work, then back in windows, did you install this audio driver?
http://www.nvidia.com/object/nforce_audio_4.62_win2kxp.html
just out of interest what was your old motherboard?
It was a shite PC Chips M848A, with some c-media 5.1 audio chip.
Thanks for helping mate.

[AMD] problems errors ram with cpu vcore change on k7n2 delta2 platinum

hello
i'm a french new owner of k7n2 delta2 platinum and i got something strange.
I have 2*512 PC3200 cas3 of kingston value ram with voltage 1.75 instead of 1.6v running in dual CAS 2.5/3/3/8 at FSB 195 like the cpu : 2500xp barton.
With occt and memtest86+ i'm stable with a CPU vcore at 1.725.After 195 the computer starts but not really stable. So i put the cpu vcore at 1.75 to put higher fsb and then i get thousands RAM errors with memtest(even if i stay fsb 195). i tried with cas 3/3/3/11 and it was worst. On the bios B5 i tried with different settings : agressive, optimal, 1/1, auto, manual, patch ddr or not...and always the same. My PSU is 450w noname and i've 4 HD 1player 1 burner & a geforce 5200 o/c 10%.
Of course i'm happy to reach 195 but i feel disapointed to be stop with this problem of vcore/ram because i have not problem of temperature with a silent boost for cpu(52°c maxi), 3 fans for the box(35°c maxi) and copper memory heat spreaders for ram.
thanks for your answer

the thing to check is the vdimm voltage for the ram ... i'm pretty sure it should be around 2.6 volts .. try upping it one step
vcore is the voltage to the cpu and doesn't affect the ram

Problems errors ram with cpu vcore change on k7n2 delta2 platinum

hello
i'm a french new owner of k7n2 delta2 platinum and i got something strange.
I have 2*512 PC3200 cas3 of kingston value ram with voltage 1.75 instead of 1.6v running in dual CAS 2.5/3/3/8 at FSB 195 like the cpu : 2500xp barton.
With occt and memtest86+ i'm stable with a CPU vcore at 1.725.After 195 the computer starts but not really stable. So i put the cpu vcore at 1.75 to put higher fsb and then i get thousands RAM errors with memtest. i tried with cas 3/3/3/11 and it was worst. On the bios B6 i tried with different settings : agressive, optimal, 1/1, auto, manual, patch ddr or not...and always the same. My PSU is 450w and i've 4 HD 1player 1 burner.
Of course i'm happy to reach 195 but i feel disapointed to be stop with this problem of vcore/ram

Quote from: osnavi on 23-September-05, 11:36:11
"...So i put the cpu vcore at 1.75 to put higher fsb and then i get thousands RAM errors with memtest..." I would say it's not the v. core but the CPU o/c. that gives that errors, as it make not sence to increase v.core only for itself.
Oh yes it does
The CPU and memory work hand-in-hand. If one is out of sync it can cause the other to start spitting out errors.
You are overclocking and that more of a scientific art, not an exact science.
Components react differently to an entire list of variables, especially the CPU/memory.
What you are trying to do requires trail and error testing however I agree the Kingston memory is holding you back at this point with the clock you are pushing
I would go for the most stable FSB settings that allow Dynamic Overclock to be enabled to SERGEANT before I would go for ultra High FSB because you will peak the system at its highest performance curve when you need the boost, and I would bet money that peak would be higher than any strait FSB over-clock you can hit stable.
Psychologically allot of people think their systems are not running the highest performance it can unless they set the system up at the highest FSB/multiplier and that is simply not true with dynamic overclocking enabled and correctly tuned with the rest of the components.

K7N2 Delta2 Platinum - Early Chipset Initialization

Hi, i have problem with K7N2 Delta2 Platinum. I bought a new one, but after install, when i turn my PC on, D-bracket signalizing Early Chipset initialization. I try to change the RAM memory slot, i put in a new batery, reset CMOS.. but it seems same like before. Pleas help me.. thx

Quote from: Richard on 12-October-05, 00:27:09
LOL
So I am the old Jedi now and you are the Padawan Learners?
Richard
something like that. you have to stop us turning to the Dark Side...
(PS wonder if topic starter will ever come back to benefit from this...)

K7N2 Delta2 Platinum Stuck at Decompressing Bios Image

Hey guys, I just bought this mobo and got everything running great (played CS:S for many, many hours ) until i tried messing with the raid and then the hard drives disappeared from bios and then I tried clearing cmos.
now it won't post and it's stuck with top leds green and bottom leds red, which is "Decompressing BIOS image to RAM for fast booting". I tried clearing cmos again with the jumpers and also by removing the battery but with no success. How can I revive my bios?
i don't think it has anything to do with my other hardware, but since you guys are pretty big on including specs so...
K7N2 Delta2 Platinum
1700+ Thoroughbred
512mb x 2 OCZ value ram
450 watt superflower ttgi
6800 pny

I saw someone talk about some insert button trick and it worked. Is this something that loads fail-safe defaults on all motherboards? it's kinda strange that I never saw anything that gave me a checksum error, so I guess maybe the checksum checker is not working or something? well, now that my comp's up and running, that's it for me. no more messing with it. thanks for taking the time to look at my post.
oh, i left out my HDs cuz I pulled them and i was just trying to get my comp to boot, that's all. They are 120gig 8mb WD's, one SATA and one IDE. The value ram is rated at 400mhz and ran fine at that speed at 7-3-3-2.5 on my other comp. My PSU provides 18amps on the 12v, not sure if that's good or not.

[nForce] K7N2 Delta2 Platinum will not boot up

i have a new K7N2 Delta2 Platinum, a new computer case, and just looking to transfer my old hard drive that was on my old mobo to this new mobo and computer case. I am running XP pro w/sp2. i have installed a new dvd burner and a new cd burner. these items where not previously connected to old pc. I have a MSI-FX5500 video card installed as well. now keep in mind that i already have my old hard drive with XP pro on it, when i go connect all the devices and power on the pc, i am able to go into the bios, it recognizes my 2gigs of corsair memory, my hard drive is recognized, both my cdr/w and my dvdr/w drives are recognized, however, when it starts to load XP from my hard drive, a very quick blue screen comes and goes and i am unable to read the error message. I was wondering is there anyway to slow down or freeze the screen so that I can read the error message? Also, more information about the setup, since i am unable to load XP pro that i already have on my hard drive, I am unable to install the software drivers for either the motherboard or the video card....... Any point of direction would be greatly appreciated. I have built several computers from the ground up before and this is the first time I have ran into this problem........ thanks
MSI K7N2 Delta2 Platinum
Athlon XP 3200+ (400 MHZ FSB)
2x512 PC3200 corsair memory, 1gig pc3200 corsair memory = 2gigs of memory
Western Digital 8MB Cache 120 GB
ePOWER EP-520XP-C1B 520Watts Power Supply
+3.3V@26A,+5V@52A,+12V@28A,-12V@1A,[email protected],[email protected]
MSI Geforce FX5500 FX5500-TD256 Video Card
Asus dvd burner
Asus cdr/w drive
Windows XP Pro SP2

since the hard drive was set up on your old mobo then it'll not work straight off on the new one as the details in the registry will be different. One way around it is to boot up off the xp cd and select to install xp and then when it finds your old install on the drive select repair the old installation and this should sort it and will keep all your data thats saved on there.
Once into windows remember to uninstall ALL the old drivers and install all the new ones or problems will arrise and force you into doing a full fresh install.

K7N2 Delta2 Platinum - How big a hard drive will it take?

K7N2 Delta2 Platinum - MS-6570E
I would like to fit a new hard drive my current one is 120GB but its getting full I also have a 40GB second drive too.
Can anyone tell me whats the biggest drive the board will take and are there any makes of drives that work well (and fast) with this board?
Thanks
Sorry I should have said I don't know how to set up a SATA hard drive so I will be buying a serial ATA hard drive

Quote
SATA is not hard to set up, although there is an extra step involved with loading OS to it and needs to be XP maybe SP2.
SATA drives are not a problem with the K7N2 Delta2, as single SATA drives are used as Native IDE devices, so there are no extra steps involved, and you do not need to press F6 during Windows Setup. Its exactly the same as installing Windows onto a IDE drive.

How to boot from SATA on a K7N2 Delta2 Platinum

Hi guys,
here is my problem, I've just bought a brand new HD Samsung SATA II 2504C, once connected to the MB I can' t boot from it, even if I change the boot sequence.
I have already two HDs connected to IDE ports, under XP I can format it, I can even install a Linus distro such as Elive, but it refuses to boot.
Is there a trick?
K7N2 Delta2 Platinum
BIOS: B5 1/20/2005
AMD 3000+
2 HDs UMDA 133
2 DVD writer LG and SAMSUNG
1 HD on SATA, which causes me troubles.

disable IDE RAID and ensure SATA is enabled in BIOS
disconnect any other IDE HDDs before you install Windows to your SATA drive; they can be reconnected again afterwards.
make sure that the SATA drive is listed first in 'Hard Disk Priority' under 'Boot Order' in BIOS

Help with MSI K7n2 Delta2 Platinum

Hi everyone,
I need some help with my system, actually I'm having troubles with my machine, often it restarts or freezes so I have to restart it manually.I own a MSI K7n2 Delta2 Platinum, AMD Athlon XP 3000+, 1 GB DDR-400 CORSAIR, ATI Radeon 9800 PRO 128MB AGP. Recently I did a clean install of Windows XP but usually I work for an hour and suddenly it restarts, and after logging in, Windows reports a log event problem; I think I have this problem because of the drivers, so I would like you to help me. Where I can get the best/last drivers for the mainboard and video card? Should I flash the bios? Is common this kind of problems? Help me please.
Thanks!

sortieins, please start an new thread and make a complete listing of your compoenents including your PSU and the amps on the various voltage rails, especially the +12V rail(s).
>>Posting Guide<<

Problems with K7N2 Delta2 Platinum

Hello!
Just bought new mobo, MSI K7N2 Delta2 Platinum and I am trying to get it working. My problem: Computer starts OK but there's no signal from GPU and no diagnose sound (the beeb when the computer starts). No picture nor sound. What should I do? I've tried another Graphics card but it didn't help. Should I jumper the processor somehow?
Technical specs:
-AMD Athlon 3000plus
-MSI K7N2 Delta2 Platinum
-1 gig 400Mhz Samsung DDR-RAM
-Antec Sonata case and TruePower 380W Power
-Ati Radeon X800 Pro GPU
The probelm might be in the PSU's 12V line, because I had a problem plugging it to the mobo. It didn't go to the bottom, I had to put some force for the effort .
Thanks you all trying to manage this for me

Quote from: Richard on 11-August-05, 01:22:03
rickshaw,
The DLED indicated RAM that is not compatible with nForce. I would still recommend trying nForce Approved RAM to be sure.
Take Care,
Richard
ohm. I found it myself already. Are you 100% sure it was the "RAM is not compatible with nForce"-led because there seems to be DDR
400 SAMSUNG 512MB 64M X 64 3 M368L6423ETM-CCC on the list and my memory is labeled M368L6523BTM-CCC so it appears to be quite identic to the one on the list? So many Samsungs on the list, why would my memory do any difference ?

Something Missing on my K7N2 Delta2 Platinum

Similar Messages

Maybe you are looking for