Something's going wrong while exporting...
It's been a while since I've actually needed to export something in FCP to a quicktime movie...but now that I have to do just that, I'm getting back to an old problem with FCP that I never solved.
Whenever I export full frame video (4:3) the exported file always comes out squeezed into some wider aspect ratio. I'm pretty sure all of my export settings are correct and I have no idea why it would do this - or what I did wrong. Is there any way to ensure that 4:3 video will be exported to a 4:3 quicktime file?
Thanks!
-Ken
Well...my MBP is fully functional 17-incher with a 2.16 GHz Intel Core Duo, 2GB of RAM, and FCP version 5.1.4 - I'm not sure which options in FCP I should report on because (as you all know) there are a million options to chose.
But whenever I try to export a video through File|Export|Quicktime Movie and set it to DV NTSC 48 khz (that should keep a normal 4:3 video in its same aspect ratio, right?)
What other specific settings should I tell you about?
Thanks!
-Ken
Similar Messages
-
Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. . Also, I have a new iPod and am afraid of using it for fear of something else going wrong.
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
Also, I have a timer that lets me know how long the trigger has been active. I want to know if it is possible if that time would be reset everytime the trigger goes off.
Attachments:
Code.vi 113 KB1. Do not run using the Continuous Run button! This is intended only for certain types of trouble shooting and not for normal operation.
2. Put a while loop around your entire program. Add a stop button wired to the stop terminal of the loop.
3. Then you can replace all the feedback nodes with one shift register with the input expanded to five elements. Sum the three bottom ones for your averaging.
4. Nothing is wrong with the In Range and Coerce. You should only check it when you have data. That is what the Data Available output from Trigger and Gate is for.
5. I am not sure what you want to reset for your timer or exactly when, but it should be possible.
6. I did not try to figure it all out but you may not need the timer while loop once you wrap the loop suggested in 2 around the rest of the code. You may be able to move the shift registers to the outer loop.
Lynn -
Export param UI goes wrong when exporting sequence?
Hi,
I'm making an exporter plug-in using Premiere Pro SDK 5.5.
I'm adding some parameters in exSelGenerateDefaultParams. These including some tabs, groups and params in each group.
But when exporting in sequence, the UI messed up, all the tab and group names don't show, excluding the audio and video tab (which name already defined in PrSDKExportParamSuite.h).
Sorry guys edited: the params name do shows, but not the groups and tabs names.
When I export the file (clicking the file and Ctrl+M), the groups & tabs names show nomally.
Another note, I removed some of Premiere already defined commons param like video width(ADBEVideoWidth), height (ADBEVideoHeight), or audio channels (ADBEAudioNumChannels), sample rate (ADBEAudioRatePerSecond), pretty much everything except for ADBETopParamGroup, ADBEVideoTabGroup, and ADBEAudioTabGroup. Since I have no need for them in my plug-in.
Is the removal of those param the cause of my problem? Or something else? I'll very appreciate if any one encountered the same problems or have knowledge about them would help me.
ThanksThanks, Rally
I set up all my tabs and groups and params in GenDefaultPam(), only the group and tabs name are wrong, and only for second export onward.
Curently trying the caching, but as far as i increased the ParamVersion, nothing has changed.
And I noticed some other thing: Even the params are displayed normally in second export, its value range is mesed up too. For example, if "MyAwesomeParam" has min value of 10 and max value of 20, at first export if I enter 0, it jumps to 10 because the entered value is smaller than the min value. But in second export, if I enter 0, it stays 0.
It is getting more and more confusing really. -
Something´s going wrong with select distinct (Oracle 10g)
Our database is oracle 10g release 2 and the query statement is:
select distinct last_name
from students;
and the query returns all of the last_names without an specific order..
If I execute the same query in oracle 9i the query returns all of the last_name in alphabetic order.
Why is it different on Oracle 10g?See also this blog entry from Mr. Kyte.
C. -
Getting something went wrong while trying to open workbook through code?
hi,
i am getting something went wrong while trying to open workbook through code below is m code:
ES.ExcelService client = new ES.ExcelService();
client.Credentials = System.Net.CredentialCache.DefaultCredentials;
ES.Status[] status;
string sessionId = client.OpenWorkbook("http://servername/Documents/exceles.xlsx", "en-us", "en-us", out status);
i have also added modify permission to wpg_wss group but i am still getting the same error.
any help is appreciated.
thanks,
gauravHi Gaurav,
For your issue, you need to make sure the site where your workbook is stored in is a Trusted Location in Excel Service Application:
http://technet.microsoft.com/en-in/library/ff191194(v=office.14).aspx
For more information, you can have a look at the blog:
http://blogs.msdn.com/b/cumgranosalis/archive/2006/03/24/excelserviceshelloworld.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
"Something went wrong while taking a photo"
I have a ASUS windows 8 laptop. when I open the camera app, it say "Something went wrong while taking a photo" and says "connect a camera". I already checked my device manager under the imaging devices, the webcam is installed. i already
checked the camera permissions under settings but it is already on. I can't also use the webcam on skype or any camera app.i I really need help with this.. thanksHi Ayshine2,
Thanks for your post.
In order to resolve this issue, I want confirm with you
that: if this issue relate to TFS? If yes, what’s the version of your TFS?
If this issue relate to SharePoint 2013, I will move this post to SharePoint forum for the better response.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Something went wrong while downloading your template
We have Office 2013 installed on Windows 7 Enterprise 64 Bit. When trying to download templates from Word, we get the message Something went wrong while downloading your template.
We have confirmed it's not the firewall blocking the download. We have also tried repairing the install of Office 2013.
Any assistance would be greatly appreciated.
KeithHello,
Which build version of Office 2013 are you using? Please make sure your Office 2013 is fully patched. You can try installing Office 2013 SP1 to check if it helps:
http://support.microsoft.com/kb/2817430
In addition, please try downloading templates from the link below and check if you will get any error message:
http://office.microsoft.com/en-us/templates/
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support -
ITunes:Something went wrong while synchronising files -'could not access'
No issues with synchronising iTunes to previous Windows 7 phone but have now upgraded to a Windows 8 phone. Have managed to get is set up ok and synchronised with some of the songs I selected to sync however, quite a few appear in a pop up box headed 'something went wrong while synchronizing files' and shows as a list of songs with 'could not access...' showing beside each. Anyone able to help please with what's gone wrong?
ThanksNo issues with synchronising iTunes to previous Windows 7 phone but have now upgraded to a Windows 8 phone. Have managed to get is set up ok and synchronised with some of the songs I selected to sync however, quite a few appear in a pop up box headed 'something went wrong while synchronizing files' and shows as a list of songs with 'could not access...' showing beside each. Anyone able to help please with what's gone wrong?
Thanks -
I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?
problem solved.
I phone 4s screen froozen -
I have one number since I am in the UK, everytime I wanna top up online something goes wrong if it's not gonna be fixed when I will need to try it again I will use vodafone, T-mobile etc. and my O2 sim will go to the Thames
Hi There are a number of ways to top up. Have a look at this linkhttp://community.o2.co.uk/t5/Discussions-Feedback/Ways-to-pay-guidelines/m-p/874982If you are on PAYG you need to scroll down to that section...
-
How do I restore my laptop, if something goes wrong?
I just got a new ThinkPad X230, but I didn't buy it itself, my sister got it for me. Now what's troubling me is that she didn't give me any thing other than the charger and the laptop itself. And my sister lives in US(She got the laptop from US only).
I plan on dual booting Windows 8 with ubuntu 12.04, just in case something goes wrong and I mess up the whole system, deleting/corrupting Windows 8, what am I supposed to do then? Can I take the laptop to Lenovo service center and get the Windows 8 back? Or, is there any option of procuring copy of drivers and Windows 8 directly from their service center?
Solved!
Go to Solution.Hello and welcome,
You can make your own recovery media - in the case of Windows 8 it's a USB flash drive - or you can order a media set from support.
To make your own: Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
It's also possible to make full backups to a USB HDD using the strangely named "Windows 7 File Recovery" tools.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
From template to DVD - something goes wrong, but where to fix it?!?!
Hi
This one really has me stumped, because to test each variation in the workflow could take me to the end of time (which is 2012 apparently!). I do apologise in advance for the forthcoming length but its a bit of a complicated one.
In short, I have shot an HDV project, digitised into FCP as HDV 1080i and used apple pro res 422 (HQ) as the compressor.
All went as per usual, looking good, but then I decide to add a template, bought from a third party supplier (trusted and used before).
Used the template in Motion 3, exported a quick time .mov using pro res 422 (HQ) and added to my sequence. All looked fine, a bit choppy in the canvas but when encoded to .flv it looked good.
Today however, I have burnt to DVD for the first time, and the main HDV footage and project looks fine, but the template aspect looks wrong - it can best be described as flicker, like a very slight field dominance issue.
So, I have spent all of today trying different exports from Motion, different exports from FCP and different settings on compressor - all to no avail - the template designer is even stumped too!
The problem is I don't know at which point of the process I'm getting it wrong, on export from Motion, on export from FCP or in compressor.
Will filters such as de-flicker applied to the clip in FCP have any effect or once its exported from motion thats it - no changes can happen to it.
To add to this nightmare, the original template is 24 fps! I have exported it as 25fps, but I wonder if its even do-able at all with this starting point?
I would also put a clip online, but it looks fine online, its only got the issue on UK TV. The template is flying screens from right to left, with moving text, and they flicker as they move.
So, over to you, well done if you read all the way to the bottom! Thanks.The first thing I would try is to export the template as Pro Res 422 NOT HQ. The HQ does nothing for HDV footage and may be over processing it. For sure it makes the file larger. Second, is the template an HD template or are you enlarging to fit? Try an export with the field dominance set to none. No easy answer I can see. Trial and error will take time for sure! Good luck,
Bob -
GNOME Shell login failed "Oh no! Something has gone wrong.."
Firstly I saw many threads about this problem, but my problem still remains.
I have installed GNOME Shell (3.12.2) along KDE :
sudo pacman -S gnome-shell gnome gnome-extra
Both worked fine until I have force installed `network-manager-applet-gtk2` : (which had conflict with `network-manager-applet`)
sudo pacman --force network-manager-applet-gtk2
After that, Gnome won't login and gets me following error at startup : (Alt+F4 not working)
Oh no! Something has gone wrong... Log Out
What's wrong with GNOME?
P.S:
KDE works fine.
I'm using KDM (However gdm is installed).
journatctl -b -0
Output :
-- Logs begin at Sat 2014-03-29 22:42:48 IRDT, end at Wed 2014-08-06 10:55:16 IRDT. --
Aug 06 10:54:16 localhost systemd-journal[123]: Runtime journal is using 8.0M (max allowed 185.0M, trying to leave 277.5M free of 1.7G available → current limit 185.0M).
Aug 06 10:54:16 localhost systemd-journal[123]: Runtime journal is using 8.0M (max allowed 185.0M, trying to leave 277.5M free of 1.7G available → current limit 185.0M).
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys cpuset
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys cpu
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys cpuacct
Aug 06 10:54:16 localhost kernel: Linux version 3.15.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014
Aug 06 10:54:16 localhost kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6591a4e5-8b02-463c-acb0-94d54f29e1ed rw quiet
Aug 06 10:54:16 localhost kernel: e820: BIOS-provided physical RAM map:
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000de64afff] usable
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000de64b000-0x00000000de84afff] ACPI NVS
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000de84b000-0x00000000dfd3efff] usable
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfd3f000-0x00000000dfdbefff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfdbf000-0x00000000dfebefff] ACPI NVS
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfebf000-0x00000000dfef6fff] ACPI data
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000dfef7000-0x00000000dfefffff] usable
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
Aug 06 10:54:16 localhost kernel: BIOS-e820: [mem 0x0000000100000000-0x000000010fffffff] usable
Aug 06 10:54:16 localhost kernel: NX (Execute Disable) protection: active
Aug 06 10:54:16 localhost kernel: SMBIOS 2.6 present.
Aug 06 10:54:16 localhost kernel: DMI: Sony Corporation VPCEE23FX/VAIO, BIOS R0160Z5 06/10/2010
Aug 06 10:54:16 localhost kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Aug 06 10:54:16 localhost kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Aug 06 10:54:16 localhost kernel: No AGP bridge found
Aug 06 10:54:16 localhost kernel: e820: last_pfn = 0x110000 max_arch_pfn = 0x400000000
Aug 06 10:54:16 localhost kernel: MTRR default type: uncachable
Aug 06 10:54:16 localhost kernel: MTRR fixed ranges enabled:
Aug 06 10:54:16 localhost kernel: 00000-9FFFF write-back
Aug 06 10:54:16 localhost kernel: A0000-BFFFF uncachable
Aug 06 10:54:16 localhost kernel: C0000-FFFFF write-through
Aug 06 10:54:16 localhost kernel: MTRR variable ranges enabled:
Aug 06 10:54:16 localhost kernel: 0 base 000000000000 mask FFFF80000000 write-back
Aug 06 10:54:16 localhost kernel: 1 base 000080000000 mask FFFFC0000000 write-back
Aug 06 10:54:16 localhost kernel: 2 base 0000C0000000 mask FFFFE0000000 write-back
Aug 06 10:54:16 localhost kernel: 3 base 0000DFEBE000 mask FFFFFFFFF000 uncachable
Aug 06 10:54:16 localhost kernel: 4 base 0000FFE00000 mask FFFFFFE00000 write-protect
Aug 06 10:54:16 localhost kernel: 5 base 000100000000 mask FFFFF0000000 write-back
Aug 06 10:54:16 localhost kernel: 6 disabled
Aug 06 10:54:16 localhost kernel: 7 disabled
Aug 06 10:54:16 localhost kernel: TOM2: 0000000120000000 aka 4608M
Aug 06 10:54:16 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Aug 06 10:54:16 localhost kernel: e820: last_pfn = 0xdff00 max_arch_pfn = 0x400000000
Aug 06 10:54:16 localhost kernel: Scanning 1 areas for low memory corruption
Aug 06 10:54:16 localhost kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Aug 06 10:54:16 localhost kernel: Using GB pages for direct mapping
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Aug 06 10:54:16 localhost kernel: [mem 0x00000000-0x000fffff] page 4k
Aug 06 10:54:16 localhost kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
Aug 06 10:54:16 localhost kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
Aug 06 10:54:16 localhost kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x10fe00000-0x10fffffff]
Aug 06 10:54:16 localhost kernel: [mem 0x10fe00000-0x10fffffff] page 2M
Aug 06 10:54:16 localhost kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x10c000000-0x10fdfffff]
Aug 06 10:54:16 localhost kernel: [mem 0x10c000000-0x10fdfffff] page 2M
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x100000000-0x10bffffff]
Aug 06 10:54:16 localhost kernel: [mem 0x100000000-0x10bffffff] page 2M
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0x00100000-0xde64afff]
Aug 06 10:54:16 localhost kernel: [mem 0x00100000-0x001fffff] page 4k
Aug 06 10:54:16 localhost kernel: [mem 0x00200000-0x3fffffff] page 2M
Aug 06 10:54:16 localhost kernel: [mem 0x40000000-0xbfffffff] page 1G
Aug 06 10:54:16 localhost kernel: [mem 0xc0000000-0xde5fffff] page 2M
Aug 06 10:54:16 localhost kernel: [mem 0xde600000-0xde64afff] page 4k
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0xde84b000-0xdfd3efff]
Aug 06 10:54:16 localhost kernel: [mem 0xde84b000-0xde9fffff] page 4k
Aug 06 10:54:16 localhost kernel: [mem 0xdea00000-0xdfbfffff] page 2M
Aug 06 10:54:16 localhost kernel: [mem 0xdfc00000-0xdfd3efff] page 4k
Aug 06 10:54:16 localhost kernel: BRK [0x01b42000, 0x01b42fff] PGTABLE
Aug 06 10:54:16 localhost kernel: BRK [0x01b43000, 0x01b43fff] PGTABLE
Aug 06 10:54:16 localhost kernel: init_memory_mapping: [mem 0xdfef7000-0xdfefffff]
Aug 06 10:54:16 localhost kernel: [mem 0xdfef7000-0xdfefffff] page 4k
Aug 06 10:54:16 localhost kernel: RAMDISK: [mem 0x379d4000-0x37ce1fff]
Aug 06 10:54:16 localhost kernel: ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony )
Aug 06 10:54:16 localhost kernel: ACPI: XSDT 0x00000000DFEF6120 00005C (v01 Sony VAIO 20100610 01000013)
Aug 06 10:54:16 localhost kernel: ACPI: FACP 0x00000000DFEF5000 0000F4 (v04 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: DSDT 0x00000000DFEE8000 0099CD (v01 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: FACS 0x00000000DFE9C000 000040
Aug 06 10:54:16 localhost kernel: ACPI: HPET 0x00000000DFEF4000 000038 (v01 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: APIC 0x00000000DFEF3000 000084 (v02 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: MCFG 0x00000000DFEF2000 00003C (v01 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: BOOT 0x00000000DFEE7000 000028 (v01 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: SLIC 0x00000000DFEE6000 000176 (v01 Sony VAIO 20100610 INTL 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: SSDT 0x00000000DFEE5000 000386 (v01 Sony VAIO 20100610 AMD 20061109)
Aug 06 10:54:16 localhost kernel: ACPI: Local APIC address 0xfee00000
Aug 06 10:54:16 localhost kernel: Scanning NUMA topology in Northbridge 24
Aug 06 10:54:16 localhost kernel: No NUMA configuration found
Aug 06 10:54:16 localhost kernel: Faking a node at [mem 0x0000000000000000-0x000000010fffffff]
Aug 06 10:54:16 localhost kernel: Initmem setup node 0 [mem 0x00000000-0x10fffffff]
Aug 06 10:54:16 localhost kernel: NODE_DATA [mem 0x10fff8000-0x10fffcfff]
Aug 06 10:54:16 localhost kernel: [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88010ba00000-ffff88010f5fffff] on node 0
Aug 06 10:54:16 localhost kernel: Zone ranges:
Aug 06 10:54:16 localhost kernel: DMA [mem 0x00001000-0x00ffffff]
Aug 06 10:54:16 localhost kernel: DMA32 [mem 0x01000000-0xffffffff]
Aug 06 10:54:16 localhost kernel: Normal [mem 0x100000000-0x10fffffff]
Aug 06 10:54:16 localhost kernel: Movable zone start for each node
Aug 06 10:54:16 localhost kernel: Early memory node ranges
Aug 06 10:54:16 localhost kernel: node 0: [mem 0x00001000-0x0009efff]
Aug 06 10:54:16 localhost kernel: node 0: [mem 0x00100000-0xde64afff]
Aug 06 10:54:16 localhost kernel: node 0: [mem 0xde84b000-0xdfd3efff]
Aug 06 10:54:16 localhost kernel: node 0: [mem 0xdfef7000-0xdfefffff]
Aug 06 10:54:16 localhost kernel: node 0: [mem 0x100000000-0x10fffffff]
Aug 06 10:54:16 localhost kernel: On node 0 totalpages: 981734
Aug 06 10:54:16 localhost kernel: DMA zone: 64 pages used for memmap
Aug 06 10:54:16 localhost kernel: DMA zone: 21 pages reserved
Aug 06 10:54:16 localhost kernel: DMA zone: 3998 pages, LIFO batch:0
Aug 06 10:54:16 localhost kernel: DMA32 zone: 14254 pages used for memmap
Aug 06 10:54:16 localhost kernel: DMA32 zone: 912200 pages, LIFO batch:31
Aug 06 10:54:16 localhost kernel: Normal zone: 1024 pages used for memmap
Aug 06 10:54:16 localhost kernel: Normal zone: 65536 pages, LIFO batch:15
Aug 06 10:54:16 localhost kernel: ACPI: PM-Timer IO Port: 0x408
Aug 06 10:54:16 localhost kernel: ACPI: Local APIC address 0xfee00000
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Aug 06 10:54:16 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Aug 06 10:54:16 localhost kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Aug 06 10:54:16 localhost kernel: IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
Aug 06 10:54:16 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 06 10:54:16 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Aug 06 10:54:16 localhost kernel: ACPI: IRQ0 used by override.
Aug 06 10:54:16 localhost kernel: ACPI: IRQ2 used by override.
Aug 06 10:54:16 localhost kernel: ACPI: IRQ9 used by override.
Aug 06 10:54:16 localhost kernel: Using ACPI (MADT) for SMP configuration information
Aug 06 10:54:16 localhost kernel: ACPI: HPET id: 0x1002a201 base: 0xfed00000
Aug 06 10:54:16 localhost kernel: smpboot: Allowing 4 CPUs, 2 hotplug CPUs
Aug 06 10:54:16 localhost kernel: nr_irqs_gsi: 40
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xde64b000-0xde84afff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdfd3f000-0xdfdbefff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdfdbf000-0xdfebefff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdfebf000-0xdfef6fff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xdff00000-0xf7ffffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xf9000000-0xfebfffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
Aug 06 10:54:16 localhost kernel: e820: [mem 0xdff00000-0xf7ffffff] available for PCI devices
Aug 06 10:54:16 localhost kernel: Booting paravirtualized kernel on bare hardware
Aug 06 10:54:16 localhost kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
Aug 06 10:54:16 localhost kernel: PERCPU: Embedded 29 pages/cpu @ffff88010fc00000 s87168 r8192 d23424 u524288
Aug 06 10:54:16 localhost kernel: pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
Aug 06 10:54:16 localhost kernel: pcpu-alloc: [0] 0 1 2 3
Aug 06 10:54:16 localhost kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 966371
Aug 06 10:54:16 localhost kernel: Policy zone: Normal
Aug 06 10:54:16 localhost kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6591a4e5-8b02-463c-acb0-94d54f29e1ed rw quiet
Aug 06 10:54:16 localhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Aug 06 10:54:16 localhost kernel: Checking aperture...
Aug 06 10:54:16 localhost kernel: No AGP bridge found
Aug 06 10:54:16 localhost kernel: Node 0: aperture @ d4000000 size 32 MB
Aug 06 10:54:16 localhost kernel: Aperture pointing to e820 RAM. Ignoring.
Aug 06 10:54:16 localhost kernel: Your BIOS doesn't leave a aperture memory hole
Aug 06 10:54:16 localhost kernel: Please enable the IOMMU option in the BIOS setup
Aug 06 10:54:16 localhost kernel: This costs you 64 MB of RAM
Aug 06 10:54:16 localhost kernel: Mapping aperture over 65536 KB of RAM @ d4000000
Aug 06 10:54:16 localhost kernel: PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
Aug 06 10:54:16 localhost kernel: Memory: 3718412K/3926936K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 208524K reserved)
Aug 06 10:54:16 localhost kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Aug 06 10:54:16 localhost kernel: Preemptible hierarchical RCU implementation.
Aug 06 10:54:16 localhost kernel: RCU dyntick-idle grace-period acceleration is enabled.
Aug 06 10:54:16 localhost kernel: Dump stacks of tasks blocking RCU-preempt GP.
Aug 06 10:54:16 localhost kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Aug 06 10:54:16 localhost kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Aug 06 10:54:16 localhost kernel: NR_IRQS:8448 nr_irqs:712 16
Aug 06 10:54:16 localhost kernel: spurious 8259A interrupt: IRQ7.
Aug 06 10:54:16 localhost kernel: Console: colour dummy device 80x25
Aug 06 10:54:16 localhost kernel: console [tty0] enabled
Aug 06 10:54:16 localhost kernel: allocated 15728640 bytes of page_cgroup
Aug 06 10:54:16 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Aug 06 10:54:16 localhost kernel: hpet clockevent registered
Aug 06 10:54:16 localhost kernel: tsc: Fast TSC calibration using PIT
Aug 06 10:54:16 localhost kernel: tsc: Detected 2094.565 MHz processor
Aug 06 10:54:16 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.67 BogoMIPS (lpj=6981883)
Aug 06 10:54:16 localhost kernel: pid_max: default: 32768 minimum: 301
Aug 06 10:54:16 localhost kernel: ACPI: Core revision 20140214
Aug 06 10:54:16 localhost kernel: ACPI: All ACPI Tables successfully acquired
Aug 06 10:54:16 localhost kernel: Security Framework initialized
Aug 06 10:54:16 localhost kernel: Yama: becoming mindful.
Aug 06 10:54:16 localhost kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 06 10:54:16 localhost kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 06 10:54:16 localhost kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Aug 06 10:54:16 localhost kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys memory
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys devices
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys freezer
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys net_cls
Aug 06 10:54:16 localhost kernel: Initializing cgroup subsys blkio
Aug 06 10:54:16 localhost kernel: tseg: 00dff00000
Aug 06 10:54:16 localhost kernel: CPU: Physical Processor ID: 0
Aug 06 10:54:16 localhost kernel: CPU: Processor Core ID: 0
Aug 06 10:54:16 localhost kernel: mce: CPU supports 6 MCE banks
Aug 06 10:54:16 localhost kernel: LVT offset 0 assigned for vector 0xf9
Aug 06 10:54:16 localhost kernel: process: using AMD E400 aware idle routine
Aug 06 10:54:16 localhost kernel: Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
Aug 06 10:54:16 localhost kernel: Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
Aug 06 10:54:16 localhost kernel: ftrace: allocating 20230 entries in 80 pages
Aug 06 10:54:16 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 06 10:54:16 localhost kernel: smpboot: CPU0: AMD Athlon(tm) II P320 Dual-Core Processor (fam: 10, model: 06, stepping: 03)
Aug 06 10:54:16 localhost kernel: Performance Events: AMD PMU driver.
Aug 06 10:54:16 localhost kernel: ... version: 0
Aug 06 10:54:16 localhost kernel: ... bit width: 48
Aug 06 10:54:16 localhost kernel: ... generic registers: 4
Aug 06 10:54:16 localhost kernel: ... value mask: 0000ffffffffffff
Aug 06 10:54:16 localhost kernel: ... max period: 00007fffffffffff
Aug 06 10:54:16 localhost kernel: ... fixed-purpose events: 0
Aug 06 10:54:16 localhost kernel: ... event mask: 000000000000000f
Aug 06 10:54:16 localhost kernel: process: System has AMD C1E enabled
Aug 06 10:54:16 localhost kernel: process: Switch to broadcast mode on CPU0
Aug 06 10:54:16 localhost kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Aug 06 10:54:16 localhost kernel: x86: Booting SMP configuration:
Aug 06 10:54:16 localhost kernel: .... node #0, CPUs: #1
Aug 06 10:54:16 localhost kernel: x86: Booted up 1 node, 2 CPUs
Aug 06 10:54:16 localhost kernel: smpboot: Total of 2 processors activated (8381.35 BogoMIPS)
Aug 06 10:54:16 localhost kernel: process: Switch to broadcast mode on CPU1
Aug 06 10:54:16 localhost kernel: devtmpfs: initialized
Aug 06 10:54:16 localhost kernel: PM: Registering ACPI NVS region [mem 0xde64b000-0xde84afff] (2097152 bytes)
Aug 06 10:54:16 localhost kernel: PM: Registering ACPI NVS region [mem 0xdfdbf000-0xdfebefff] (1048576 bytes)
Aug 06 10:54:16 localhost kernel: pinctrl core: initialized pinctrl subsystem
Aug 06 10:54:16 localhost kernel: RTC time: 10:54:09, date: 08/06/14
Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 16
Aug 06 10:54:16 localhost kernel: cpuidle: using governor ladder
Aug 06 10:54:16 localhost kernel: cpuidle: using governor menu
Aug 06 10:54:16 localhost kernel: node 0 link 0: io port [0, ffffff]
Aug 06 10:54:16 localhost kernel: TOM: 00000000e0000000 aka 3584M
Aug 06 10:54:16 localhost kernel: Fam 10h mmconf [mem 0xf8000000-0xfbffffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [a0000, bffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [e0000000, efffffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f0000000, f40fffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f4100000, f42fffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f4300000, f6ffffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f7000000, f7ffffff]
Aug 06 10:54:16 localhost kernel: node 0 link 0: mmio [f8000000, ff7fffff] ==> [fc000000, ff7fffff]
Aug 06 10:54:16 localhost kernel: TOM2: 0000000120000000 aka 4608M
Aug 06 10:54:16 localhost kernel: bus: [bus 00-1f] on node 0 link 0
Aug 06 10:54:16 localhost kernel: bus: 00 [io 0x0000-0xffff]
Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0x000a0000-0x000bffff]
Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0xe0000000-0xf7ffffff]
Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0xfc000000-0xffffffff]
Aug 06 10:54:16 localhost kernel: bus: 00 [mem 0x120000000-0xfcffffffff]
Aug 06 10:54:16 localhost kernel: ACPI: bus type PCI registered
Aug 06 10:54:16 localhost kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Aug 06 10:54:16 localhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf8000000-0xf8ffffff] (base 0xf8000000)
Aug 06 10:54:16 localhost kernel: PCI: MMCONFIG at [mem 0xf8000000-0xf8ffffff] reserved in E820
Aug 06 10:54:16 localhost kernel: PCI: Using configuration type 1 for base access
Aug 06 10:54:16 localhost kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Aug 06 10:54:16 localhost kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Aug 06 10:54:16 localhost kernel: mtrr: probably your BIOS does not setup all CPUs.
Aug 06 10:54:16 localhost kernel: mtrr: corrected configuration.
Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(Module Device)
Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(Processor Device)
Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 06 10:54:16 localhost kernel: ACPI: Added _OSI(Processor Aggregator Device)
Aug 06 10:54:16 localhost kernel: ACPI: Executed 1 blocks of module-level executable AML code
Aug 06 10:54:16 localhost kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Aug 06 10:54:16 localhost kernel: ACPI: Interpreter enabled
Aug 06 10:54:16 localhost kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
Aug 06 10:54:16 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
Aug 06 10:54:16 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Aug 06 10:54:16 localhost kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 06 10:54:16 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
Aug 06 10:54:16 localhost kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0f] only partially covers this bridge
Aug 06 10:54:16 localhost kernel: PCI host bridge to bus 0000:00
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf6ffffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: [104d:9602] type 01 class 0x060400
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x10: [io 0xb038-0xb03f]
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x14: [io 0xb04c-0xb04f]
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x18: [io 0xb030-0xb037]
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x1c: [io 0xb048-0xb04b]
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x20: [io 0xb010-0xb01f]
Aug 06 10:54:16 localhost kernel: pci 0000:00:11.0: reg 0x24: [mem 0xf4308000-0xf43083ff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.0: reg 0x10: [mem 0xf4307000-0xf4307fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: reg 0x10: [mem 0xf4308600-0xf43086ff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Aug 06 10:54:16 localhost kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.0: reg 0x10: [mem 0xf4306000-0xf4306fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: reg 0x10: [mem 0xf4308500-0xf43085ff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
Aug 06 10:54:16 localhost kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: reg 0x20: [io 0xb000-0xb00f]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.2: reg 0x10: [mem 0xf4300000-0xf4303fff 64bit]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.5: reg 0x10: [mem 0xf4305000-0xf4305fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.0: reg 0x10: [mem 0xf4304000-0xf4304fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.0: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: reg 0x10: [mem 0xf4308400-0xf43084ff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
Aug 06 10:54:16 localhost kernel: pci 0000:00:16.2: System wakeup disabled by ACPI
Aug 06 10:54:16 localhost kernel: pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
Aug 06 10:54:16 localhost kernel: pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
Aug 06 10:54:16 localhost kernel: pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
Aug 06 10:54:16 localhost kernel: pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
Aug 06 10:54:16 localhost kernel: pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x14: [io 0xa000-0xa0ff]
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x18: [mem 0xf4200000-0xf420ffff]
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: reg 0x24: [mem 0xf4100000-0xf41fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.1: reg 0x10: [mem 0xf4210000-0xf4213fff]
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.1: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf42fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: reg 0x10: [io 0x6000-0x60ff]
Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: supports D1 D2
Aug 06 10:54:16 localhost kernel: pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: PCI bridge to [bus 02-07]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [io 0x6000-0x9fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf3100000-0xf40fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: [168c:002b] type 00 class 0x028000
Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: reg 0x10: [mem 0xf3000000-0xf300ffff 64bit]
Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: supports D1
Aug 06 10:54:16 localhost kernel: pci 0000:09:00.0: PME# supported from D0 D1 D3hot D3cold
Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: PCI bridge to [bus 09]
Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xf3000000-0xf30fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 0a] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfed3ffff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: PCI bridge to [bus 0b-10]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [io 0x2000-0x5fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf2000000-0xf2ffffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: on NUMA node 0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
Aug 06 10:54:16 localhost kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
Aug 06 10:54:16 localhost kernel: ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
Aug 06 10:54:16 localhost kernel: vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
Aug 06 10:54:16 localhost kernel: vgaarb: loaded
Aug 06 10:54:16 localhost kernel: vgaarb: bridge control possible 0000:01:05.0
Aug 06 10:54:16 localhost kernel: PCI: Using ACPI for IRQ routing
Aug 06 10:54:16 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0xde64b000-0xdfffffff]
Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0xdfd3f000-0xdfffffff]
Aug 06 10:54:16 localhost kernel: e820: reserve RAM buffer [mem 0xdff00000-0xdfffffff]
Aug 06 10:54:16 localhost kernel: NetLabel: Initializing
Aug 06 10:54:16 localhost kernel: NetLabel: domain hash size = 128
Aug 06 10:54:16 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Aug 06 10:54:16 localhost kernel: NetLabel: unlabeled traffic allowed by default
Aug 06 10:54:16 localhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Aug 06 10:54:16 localhost kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Aug 06 10:54:16 localhost kernel: Switched to clocksource hpet
Aug 06 10:54:16 localhost kernel: pnp: PnP ACPI init
Aug 06 10:54:16 localhost kernel: ACPI: bus type PNP registered
Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xf7000000-0xf7ffffff] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 06 10:54:16 localhost kernel: pnp 00:01: [dma 4]
Aug 06 10:54:16 localhost kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Aug 06 10:54:16 localhost kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
Aug 06 10:54:16 localhost kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
Aug 06 10:54:16 localhost kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
Aug 06 10:54:16 localhost kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
Aug 06 10:54:16 localhost kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0400-0x04cf] could not be reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x04d6] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0680-0x06ff] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x077a] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c00-0x0c01] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c14] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c50-0x0c52] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c6c] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0c6f] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: [io 0x0cd0-0x0cdb] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Aug 06 10:54:16 localhost kernel: system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
Aug 06 10:54:16 localhost kernel: system 00:08: [mem 0xffe00000-0xffffffff] has been reserved
Aug 06 10:54:16 localhost kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
Aug 06 10:54:16 localhost kernel: pnp: PnP ACPI: found 9 devices
Aug 06 10:54:16 localhost kernel: ACPI: bus type PNP unregistered
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf42fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: PCI bridge to [bus 02-07]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [io 0x6000-0x9fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf3100000-0xf40fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: PCI bridge to [bus 09]
Aug 06 10:54:16 localhost kernel: pci 0000:00:07.0: bridge window [mem 0xf3000000-0xf30fffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:14.4: PCI bridge to [bus 0a]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: PCI bridge to [bus 0b-10]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [io 0x2000-0x5fff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf2000000-0xf2ffffff]
Aug 06 10:54:16 localhost kernel: pci 0000:00:15.0: bridge window [mem 0xf1000000-0xf1ffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf6ffffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf42fffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:02: resource 0 [io 0x6000-0x9fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf40fffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:09: resource 1 [mem 0xf3000000-0xf30fffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 7 [mem 0x000c0000-0x000c3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 8 [mem 0x000c4000-0x000c7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 9 [mem 0x000c8000-0x000cbfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 10 [mem 0x000d0000-0x000d3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 11 [mem 0x000d4000-0x000d7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 12 [mem 0x000d8000-0x000dbfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 13 [mem 0x000dc000-0x000dffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 14 [mem 0x000e0000-0x000e3fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 15 [mem 0x000e4000-0x000e7fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 16 [mem 0x000e8000-0x000ebfff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 17 [mem 0x000ec000-0x000effff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 18 [mem 0xe0000000-0xf6ffffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 19 [mem 0xf8000000-0xfed3ffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0a: resource 20 [mem 0xfed45000-0xffffffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0b: resource 0 [io 0x2000-0x5fff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0b: resource 1 [mem 0xf2000000-0xf2ffffff]
Aug 06 10:54:16 localhost kernel: pci_bus 0000:0b: resource 2 [mem 0xf1000000-0xf1ffffff 64bit pref]
Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 2
Aug 06 10:54:16 localhost kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes)
Aug 06 10:54:16 localhost kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Aug 06 10:54:16 localhost kernel: TCP: Hash tables configured (established 32768 bind 32768)
Aug 06 10:54:16 localhost kernel: TCP: reno registered
Aug 06 10:54:16 localhost kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
Aug 06 10:54:16 localhost kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 1
Aug 06 10:54:16 localhost kernel: pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
Aug 06 10:54:16 localhost kernel: pci 0000:01:05.0: Boot video device
Aug 06 10:54:16 localhost kernel: PCI: CLS 64 bytes, default 64
Aug 06 10:54:16 localhost kernel: Unpacking initramfs...
Aug 06 10:54:16 localhost kernel: Freeing initrd memory: 3128K (ffff8800379d4000 - ffff880037ce2000)
Aug 06 10:54:16 localhost kernel: PCI-DMA: Disabling AGP.
Aug 06 10:54:16 localhost kernel: PCI-DMA: aperture base @ d4000000 size 65536 KB
Aug 06 10:54:16 localhost kernel: PCI-DMA: using GART IOMMU.
Aug 06 10:54:16 localhost kernel: PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Aug 06 10:54:16 localhost kernel: Simple Boot Flag at 0x44 set to 0x1
Aug 06 10:54:16 localhost kernel: LVT offset 1 assigned for vector 0x400
Aug 06 10:54:16 localhost kernel: IBS: LVT offset 1 assigned
Aug 06 10:54:16 localhost kernel: perf: AMD IBS detected (0x0000001f)
Aug 06 10:54:16 localhost kernel: Scanning for low memory corruption every 60 seconds
Aug 06 10:54:16 localhost kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
Aug 06 10:54:16 localhost kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Aug 06 10:54:16 localhost kernel: zbud: loaded
Aug 06 10:54:16 localhost kernel: VFS: Disk quotas dquot_6.5.2
Aug 06 10:54:16 localhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 06 10:54:16 localhost kernel: msgmni has been set to 7397
Aug 06 10:54:16 localhost kernel: Key type big_key registered
Aug 06 10:54:16 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Aug 06 10:54:16 localhost kernel: io scheduler noop registered
Aug 06 10:54:16 localhost kernel: io scheduler deadline registered
Aug 06 10:54:16 localhost kernel: io scheduler cfq registered (default)
Aug 06 10:54:16 localhost kernel: pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
Aug 06 10:54:16 localhost kernel: pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
Aug 06 10:54:16 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 06 10:54:16 localhost kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Aug 06 10:54:16 localhost kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
Aug 06 10:54:16 localhost kernel: vesafb: scrolling: redraw
Aug 06 10:54:16 localhost kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Aug 06 10:54:16 localhost kernel: vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001780000, using 3072k, total 3072k
Aug 06 10:54:16 localhost kernel: Console: switching to colour frame buffer device 128x48
Aug 06 10:54:16 localhost kernel: fb0: VESA VGA frame buffer device
Aug 06 10:54:16 localhost kernel: GHES: HEST is not enabled!
Aug 06 10:54:16 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Aug 06 10:54:16 localhost kernel: Linux agpgart interface v0.103
Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs
Aug 06 10:54:16 localhost kernel: ledtrig-cpu: registered to indicate activity on CPUs
Aug 06 10:54:16 localhost kernel: TCP: cubic registered
Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 10
Aug 06 10:54:16 localhost kernel: NET: Registered protocol family 17
Aug 06 10:54:16 localhost kernel: registered taskstats version 1
Aug 06 10:54:16 localhost kernel: Magic number: 10:412:931
Aug 06 10:54:16 localhost kernel: rtc_cmos 00:03: setting system clock to 2014-08-06 10:54:10 UTC (1407322450)
Aug 06 10:54:16 localhost kernel: PM: Hibernation image not present or could not be loaded.
Aug 06 10:54:16 localhost kernel: Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
Aug 06 10:54:16 localhost kernel: Write protecting the kernel read-only data: 8192k
Aug 06 10:54:16 localhost kernel: Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
Aug 06 10:54:16 localhost kernel: Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
Aug 06 10:54:16 localhost kernel: random: systemd-tmpfile urandom read with 4 bits of entropy available
Aug 06 10:54:16 localhost systemd-udevd[47]: starting version 215
Aug 06 10:54:16 localhost kernel: i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Aug 06 10:54:16 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 06 10:54:16 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 06 10:54:16 localhost kernel: SCSI subsystem initialized
Aug 06 10:54:16 localhost kernel: libata version 3.00 loaded.
Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: version 3.0
Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: irq 42 for MSI/MSI-X
Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Aug 06 10:54:16 localhost kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
Aug 06 10:54:16 localhost kernel: ACPI: bus type USB registered
Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver usbfs
Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver hub
Aug 06 10:54:16 localhost kernel: scsi0 : ahci
Aug 06 10:54:16 localhost kernel: usbcore: registered new device driver usb
Aug 06 10:54:16 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 06 10:54:16 localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 06 10:54:16 localhost kernel: ohci-pci: OHCI PCI platform driver
Aug 06 10:54:16 localhost kernel: ehci-pci: EHCI PCI platform driver
Aug 06 10:54:16 localhost kernel: scsi1 : ahci
Aug 06 10:54:16 localhost kernel: ata1: SATA max UDMA/133 abar m1024@0xf4308000 port 0xf4308100 irq 42
Aug 06 10:54:16 localhost kernel: ata2: SATA max UDMA/133 abar m1024@0xf4308000 port 0xf4308180 irq 42
Aug 06 10:54:16 localhost kernel: scsi2 : pata_atiixp
Aug 06 10:54:16 localhost kernel: scsi3 : pata_atiixp
Aug 06 10:54:16 localhost kernel: ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb000 irq 14
Aug 06 10:54:16 localhost kernel: ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb008 irq 15
Aug 06 10:54:16 localhost kernel: QUIRK: Enable AMD PLL fix
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:12.0: OHCI PCI host controller
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:12.0: irq 18, io mem 0xf4307000
Aug 06 10:54:16 localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: 5 ports detected
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:13.0: OHCI PCI host controller
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:13.0: irq 18, io mem 0xf4306000
Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: 5 ports detected
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:14.5: OHCI PCI host controller
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 3
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:14.5: irq 18, io mem 0xf4305000
Aug 06 10:54:16 localhost kernel: hub 3-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 3-0:1.0: 2 ports detected
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:16.0: OHCI PCI host controller
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 4
Aug 06 10:54:16 localhost kernel: ohci-pci 0000:00:16.0: irq 18, io mem 0xf4304000
Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: 4 ports detected
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: EHCI Host Controller
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: debug port 1
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: irq 17, io mem 0xf4308600
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
Aug 06 10:54:16 localhost kernel: hub 5-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 5-0:1.0: 5 ports detected
Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 1-0:1.0: 5 ports detected
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: EHCI Host Controller
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: debug port 1
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: irq 17, io mem 0xf4308500
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
Aug 06 10:54:16 localhost kernel: hub 6-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 6-0:1.0: 5 ports detected
Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 2-0:1.0: 5 ports detected
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: EHCI Host Controller
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: debug port 1
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: irq 17, io mem 0xf4308400
Aug 06 10:54:16 localhost kernel: ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
Aug 06 10:54:16 localhost kernel: hub 7-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 7-0:1.0: 4 ports detected
Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: USB hub found
Aug 06 10:54:16 localhost kernel: hub 4-0:1.0: 4 ports detected
Aug 06 10:54:16 localhost kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 06 10:54:16 localhost kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 06 10:54:16 localhost kernel: ata1.00: ATA-8: SAMSUNG HM321HI, 2AJ10001, max UDMA/133
Aug 06 10:54:16 localhost kernel: ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Aug 06 10:54:16 localhost kernel: ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, KS05, max UDMA/100
Aug 06 10:54:16 localhost kernel: ata2.00: configured for UDMA/100
Aug 06 10:54:16 localhost kernel: ata1.00: configured for UDMA/133
Aug 06 10:54:16 localhost kernel: scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM321HI 2AJ1 PQ: 0 ANSI: 5
Aug 06 10:54:16 localhost kernel: scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N KS05 PQ: 0 ANSI: 5
Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 06 10:54:16 localhost kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 06 10:54:16 localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Aug 06 10:54:16 localhost kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Aug 06 10:54:16 localhost kernel: sda: sda1 sda3 sda4 < sda5 sda6 sda7 sda8 >
Aug 06 10:54:16 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Aug 06 10:54:16 localhost kernel: tsc: Refined TSC clocksource calibration: 2094.754 MHz
Aug 06 10:54:16 localhost kernel: usb 1-3: new low-speed USB device number 2 using ohci-pci
Aug 06 10:54:16 localhost kernel: hidraw: raw HID events driver (C) Jiri Kosina
Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver usbhid
Aug 06 10:54:16 localhost kernel: usbhid: USB HID core driver
Aug 06 10:54:16 localhost kernel: input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:15D9:0A4F.0001/input/input2
Aug 06 10:54:16 localhost kernel: hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-3/input0
Aug 06 10:54:16 localhost kernel: usb 6-3: new high-speed USB device number 2 using ehci-pci
Aug 06 10:54:16 localhost kernel: usb 7-3: new high-speed USB device number 2 using ehci-pci
Aug 06 10:54:16 localhost kernel: Switched to clocksource tsc
Aug 06 10:54:16 localhost kernel: random: nonblocking pool is initialized
Aug 06 10:54:16 localhost kernel: usb-storage 7-3:1.0: USB Mass Storage device detected
Aug 06 10:54:16 localhost kernel: scsi4 : usb-storage 7-3:1.0
Aug 06 10:54:16 localhost kernel: usbcore: registered new interface driver usb-storage
Aug 06 10:54:16 localhost kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Aug 06 10:54:16 localhost systemd[1]: RTC configured in localtime, applying delta of 270 minutes to system time.
Aug 06 10:54:16 localhost kernel: scsi 4:0:0:0: Direct-Access Generic 2.0 Reader -SD 1.00 PQ: 0 ANSI: 0 CCS
Aug 06 10:54:16 localhost kernel: scsi 4:0:0:1: Direct-Access Generic 2.0 Reader -MS 1.00 PQ: 0 ANSI: 0 CCS
Aug 06 10:54:16 localhost kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Aug 06 10:54:16 localhost kernel: sd 4:0:0:1: [sdc] Attached SCSI removable disk
Aug 06 10:54:16 localhost systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
Aug 06 10:54:16 localhost systemd-readahead[117]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
Aug 06 10:54:16 localhost kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Aug 06 10:54:16 localhost systemd-journal[123]: Journal started
Aug 06 10:54:16 localhost systemd-udevd[149]: starting version 215
Aug 06 10:54:21 localhost kernel: ACPI: processor limited to max C-state 1
Aug 06 10:54:21 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
Aug 06 10:54:21 localhost kernel: ACPI: Power Button [PWRB]
Aug 06 10:54:21 localhost kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
Aug 06 10:54:21 localhost kernel: ACPI: Lid Switch [LID]
Aug 06 10:54:21 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Aug 06 10:54:21 localhost kernel: ACPI: Power Button [PWRF]
Aug 06 10:54:21 localhost kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Aug 06 10:54:21 localhost kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
Aug 06 10:54:21 localhost kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Aug 06 10:54:21 localhost kernel: acpi device:01: registered as cooling_device2
Aug 06 10:54:21 localhost kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
Aug 06 10:54:21 localhost kernel: acpi-cpufreq: overriding BIOS provided _PSD data
Aug 06 10:54:21 localhost kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
Aug 06 10:54:21 localhost kernel: sp5100_tco: PCI Revision ID: 0x41
Aug 06 10:54:21 localhost kernel: sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
Aug 06 10:54:21 localhost kernel: sp5100_tco: Last reboot was not triggered by watchdog.
Aug 06 10:54:21 localhost kernel: sp5100_tco: initialized (0xffffc90001fe0b00). heartbeat=60 sec (nowayout=0)
Aug 06 10:54:21 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 06 10:54:21 localhost kernel: thermal LNXTHERM:00: registered as thermal_zone0
Aug 06 10:54:21 localhost kernel: ACPI: Thermal Zone [THRM] (52 C)
Aug 06 10:54:21 localhost kernel: ACPI: Battery Slot [BAT1] (battery present)
Aug 06 10:54:21 localhost kernel: ACPI: AC Adapter [ACAD] (on-line)
Aug 06 10:54:22 localhost kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0: irq 43 for MSI/MSI-X
Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90002068000, 54:42:49:2b:87:32, XID 0c100000 IRQ 43
Aug 06 10:54:22 localhost kernel: r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Aug 06 10:54:22 localhost kernel: input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/SNY5001:00/input/input7
Aug 06 10:54:22 localhost kernel: input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/SNY5001:00/input/input8
Aug 06 10:54:22 localhost kernel: sony_laptop: brightness ignored, must be controlled by ACPI video driver
Aug 06 10:54:22 localhost kernel: sony_laptop: SNC setup done.
Aug 06 10:54:22 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Aug 06 10:54:22 localhost kernel: cfg80211: Calling CRDA to update world regulatory domain
Aug 06 10:54:23 localhost kernel: [drm] radeon kernel modesetting enabled.
Aug 06 10:54:23 localhost kernel: checking generic (e0000000 300000) vs hw (e0000000 10000000)
Aug 06 10:54:23 localhost kernel: fb: switching to radeondrmfb from VESA VGA
Aug 06 10:54:23 localhost kernel: Console: switching to colour dummy device 80x25
Aug 06 10:54:23 localhost kernel: [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x104D:0x9077).
Aug 06 10:54:23I pressed Ctrl + Alt + F1 and then exported these Logs :
"~/.xsession-errors" is empty!
But
/var/log/Xorg.0.log
[ 25.933]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 25.933] X Protocol Version 11, Revision 0
[ 25.933] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 25.933] Current Operating System: Linux localhost 3.15.8-1-ARCH #1 SMP PREEMPT Fri Aug 1 08:51:42 CEST 2014 x86_64
[ 25.933] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6591a4e5-8b02-463c-acb0-94d54f29e1ed rw quiet
[ 25.933] Build Date: 31 July 2014 11:53:19AM
[ 25.933]
[ 25.933] Current version of pixman: 0.32.6
[ 25.933] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 25.933] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 25.933] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 8 11:01:40 2014
[ 26.090] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.090] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.091] (==) No Layout section. Using the first Screen section.
[ 26.091] (==) No screen section available. Using defaults.
[ 26.091] (**) |-->Screen "Default Screen Section" (0)
[ 26.091] (**) | |-->Monitor "<default monitor>"
[ 26.091] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 26.091] (==) Automatically adding devices
[ 26.091] (==) Automatically enabling devices
[ 26.091] (==) Automatically adding GPU devices
[ 26.091] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 26.091] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.091] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 26.091] (II) Loader magic: 0x818d80
[ 26.091] (II) Module ABI versions:
[ 26.091] X.Org ANSI C Emulation: 0.4
[ 26.091] X.Org Video Driver: 18.0
[ 26.091] X.Org XInput driver : 21.0
[ 26.091] X.Org Server Extension : 8.0
[ 26.094] (EE) systemd-logind: failed to get session: PID 447 does not belong to any known session
[ 26.095] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.097] (--) PCI:*(0:1:5:0) 1002:9712:104d:9077 rev 0, Mem @ 0xe0000000/268435456, 0xf4200000/65536, 0xf4100000/1048576, I/O @ 0x0000a000/256
[ 26.097] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.097] (II) LoadModule: "glx"
[ 26.265] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.269] (II) Module glx: vendor="X.Org Foundation"
[ 26.269] compiled for 1.16.0, module version = 1.0.0
[ 26.269] ABI class: X.Org Server Extension, version 8.0
[ 26.269] (==) AIGLX enabled
[ 26.269] (==) Matched ati as autoconfigured driver 0
[ 26.269] (==) Matched ati as autoconfigured driver 1
[ 26.269] (==) Matched modesetting as autoconfigured driver 2
[ 26.269] (==) Matched fbdev as autoconfigured driver 3
[ 26.269] (==) Matched vesa as autoconfigured driver 4
[ 26.269] (==) Assigned the driver to the xf86ConfigLayout
[ 26.269] (II) LoadModule: "ati"
[ 26.269] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 26.270] (II) Module ati: vendor="X.Org Foundation"
[ 26.270] compiled for 1.16.0, module version = 7.4.0
[ 26.270] Module class: X.Org Video Driver
[ 26.270] ABI class: X.Org Video Driver, version 18.0
[ 26.270] (II) LoadModule: "radeon"
[ 26.270] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 26.271] (II) Module radeon: vendor="X.Org Foundation"
[ 26.271] compiled for 1.16.0, module version = 7.4.0
[ 26.271] Module class: X.Org Video Driver
[ 26.271] ABI class: X.Org Video Driver, version 18.0
[ 26.271] (II) LoadModule: "modesetting"
[ 26.271] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 26.271] (II) Module modesetting: vendor="X.Org Foundation"
[ 26.271] compiled for 1.16.0, module version = 0.9.0
[ 26.271] Module class: X.Org Video Driver
[ 26.271] ABI class: X.Org Video Driver, version 18.0
[ 26.271] (II) LoadModule: "fbdev"
[ 26.272] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 26.272] (II) Module fbdev: vendor="X.Org Foundation"
[ 26.272] compiled for 1.16.0, module version = 0.4.4
[ 26.272] Module class: X.Org Video Driver
[ 26.272] ABI class: X.Org Video Driver, version 18.0
[ 26.272] (II) LoadModule: "vesa"
[ 26.272] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 26.272] (II) Module vesa: vendor="X.Org Foundation"
[ 26.272] compiled for 1.16.0, module version = 2.3.2
[ 26.272] Module class: X.Org Video Driver
[ 26.272] ABI class: X.Org Video Driver, version 18.0
[ 26.273] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 26.280] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 26.280] (II) FBDEV: driver for framebuffer: fbdev
[ 26.280] (II) VESA: driver for VESA chipsets: vesa
[ 26.280] (++) using VT number 7
[ 26.292] (II) [KMS] Kernel modesetting enabled.
[ 26.292] (WW) Falling back to old probe method for modesetting
[ 26.292] (WW) Falling back to old probe method for fbdev
[ 26.292] (II) Loading sub module "fbdevhw"
[ 26.292] (II) LoadModule: "fbdevhw"
[ 26.293] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 26.293] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 26.293] compiled for 1.16.0, module version = 0.0.2
[ 26.293] ABI class: X.Org Video Driver, version 18.0
[ 26.293] (WW) Falling back to old probe method for vesa
[ 26.293] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 26.293] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 26.293] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 26.293] (==) RADEON(0): Default visual is TrueColor
[ 26.293] (==) RADEON(0): RGB weight 888
[ 26.293] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 26.293] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712)
[ 26.294] (II) Loading sub module "dri2"
[ 26.294] (II) LoadModule: "dri2"
[ 26.294] (II) Module "dri2" already built-in
[ 26.294] (II) Loading sub module "exa"
[ 26.294] (II) LoadModule: "exa"
[ 26.294] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 26.294] (II) Module exa: vendor="X.Org Foundation"
[ 26.294] compiled for 1.16.0, module version = 2.6.0
[ 26.294] ABI class: X.Org Video Driver, version 18.0
[ 26.294] (II) RADEON(0): KMS Color Tiling: enabled
[ 26.294] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 26.294] (II) RADEON(0): KMS Pageflipping: enabled
[ 26.295] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 26.313] (II) RADEON(0): Output VGA-0 has no monitor section
[ 26.314] (II) RADEON(0): Output LVDS has no monitor section
[ 26.316] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 26.337] (II) RADEON(0): EDID for output VGA-0
[ 26.337] (II) RADEON(0): EDID for output LVDS
[ 26.337] (II) RADEON(0): Manufacturer: LGD Model: d901 Serial#: 0
[ 26.337] (II) RADEON(0): Year: 2008 Week: 0
[ 26.337] (II) RADEON(0): EDID Version: 1.3
[ 26.337] (II) RADEON(0): Digital Display Input
[ 26.337] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 26.337] (II) RADEON(0): Gamma: 2.20
[ 26.337] (II) RADEON(0): No DPMS capabilities specified
[ 26.337] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.337] (II) RADEON(0): First detailed timing is preferred mode
[ 26.337] (II) RADEON(0): redX: 0.640 redY: 0.353 greenX: 0.319 greenY: 0.572
[ 26.337] (II) RADEON(0): blueX: 0.148 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
[ 26.337] (II) RADEON(0): Manufacturer's mask: 0
[ 26.337] (II) RADEON(0): Supported detailed timing:
[ 26.337] (II) RADEON(0): clock: 72.3 MHz Image Size: 344 x 194 mm
[ 26.337] (II) RADEON(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 26.337] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
[ 26.337] (II) RADEON(0): LG Display
[ 26.337] (II) RADEON(0): LP156WH1-TLC1
[ 26.337] (II) RADEON(0): EDID (in hex):
[ 26.337] (II) RADEON(0): 00ffffffffffff0030e401d900000000
[ 26.337] (II) RADEON(0): 00120103802213780ade05a35a519226
[ 26.337] (II) RADEON(0): 1a505400000001010101010101010101
[ 26.337] (II) RADEON(0): 0101010101013e1c56a0500016303020
[ 26.337] (II) RADEON(0): 350058c2100000190000000000000000
[ 26.338] (II) RADEON(0): 00000000000000000000000000fe004c
[ 26.338] (II) RADEON(0): 4720446973706c61790a2020000000fe
[ 26.338] (II) RADEON(0): 004c503135365748312d544c4331004e
[ 26.338] (II) RADEON(0): Printing probed modes for output LVDS
[ 26.338] (II) RADEON(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz eP)
[ 26.338] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
[ 26.338] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 26.338] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 26.338] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 26.338] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
[ 26.338] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
[ 26.338] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 26.340] (II) RADEON(0): EDID for output HDMI-0
[ 26.340] (II) RADEON(0): Output VGA-0 disconnected
[ 26.340] (II) RADEON(0): Output LVDS connected
[ 26.340] (II) RADEON(0): Output HDMI-0 disconnected
[ 26.340] (II) RADEON(0): Using exact sizes for initial modes
[ 26.340] (II) RADEON(0): Output LVDS using initial mode 1366x768
[ 26.340] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 26.340] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000
[ 26.340] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 26.340] (==) RADEON(0): DPI set to (96, 96)
[ 26.340] (II) Loading sub module "fb"
[ 26.340] (II) LoadModule: "fb"
[ 26.341] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.342] (II) Module fb: vendor="X.Org Foundation"
[ 26.342] compiled for 1.16.0, module version = 1.0.0
[ 26.342] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.342] (II) Loading sub module "ramdac"
[ 26.342] (II) LoadModule: "ramdac"
[ 26.342] (II) Module "ramdac" already built-in
[ 26.342] (II) UnloadModule: "modesetting"
[ 26.342] (II) Unloading modesetting
[ 26.342] (II) UnloadModule: "fbdev"
[ 26.342] (II) Unloading fbdev
[ 26.342] (II) UnloadSubModule: "fbdevhw"
[ 26.342] (II) Unloading fbdevhw
[ 26.342] (II) UnloadModule: "vesa"
[ 26.342] (II) Unloading vesa
[ 26.342] (--) Depth 24 pixmap format is 32 bpp
[ 26.342] (II) RADEON(0): [DRI2] Setup complete
[ 26.342] (II) RADEON(0): [DRI2] DRI driver: r600
[ 26.342] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 26.343] (II) RADEON(0): Front buffer size: 4128K
[ 26.343] (II) RADEON(0): VRAM usage limit set to 228153K
[ 26.343] (==) RADEON(0): Backing store enabled
[ 26.343] (II) RADEON(0): Direct rendering enabled
[ 26.343] (II) EXA(0): Driver allocated offscreen pixmaps
[ 26.343] (II) EXA(0): Driver registered support for the following operations:
[ 26.343] (II) Solid
[ 26.343] (II) Copy
[ 26.343] (II) Composite (RENDER acceleration)
[ 26.343] (II) UploadToScreen
[ 26.343] (II) DownloadFromScreen
[ 26.343] (II) RADEON(0): Acceleration enabled
[ 26.343] (==) RADEON(0): DPMS enabled
[ 26.343] (==) RADEON(0): Silken mouse enabled
[ 26.344] (II) RADEON(0): Set up textured video
[ 26.344] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 26.344] (II) RADEON(0): [XvMC] Extension initialized.
[ 26.344] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.344] (--) RandR disabled
[ 28.774] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28.774] (II) AIGLX: enabled GLX_ARB_create_context
[ 28.774] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28.774] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 28.774] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28.774] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 28.774] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 28.774] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 28.774] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 28.776] (II) AIGLX: Loaded and initialized r600
[ 28.776] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28.777] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 29.030] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 29.030] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.030] (II) LoadModule: "evdev"
[ 29.031] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.253] (II) Module evdev: vendor="X.Org Foundation"
[ 30.253] compiled for 1.16.0, module version = 2.9.0
[ 30.253] Module class: X.Org XInput Driver
[ 30.253] ABI class: X.Org XInput driver, version 21.0
[ 30.253] (II) Using input driver 'evdev' for 'Power Button'
[ 30.253] (**) Power Button: always reports core events
[ 30.253] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 30.253] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.253] (--) evdev: Power Button: Found keys
[ 30.253] (II) evdev: Power Button: Configuring as keyboard
[ 30.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 30.254] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.254] (**) Option "xkb_rules" "evdev"
[ 30.254] (**) Option "xkb_model" "pc104"
[ 30.254] (**) Option "xkb_layout" "us"
[ 30.302] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 30.302] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.302] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.302] (**) Video Bus: always reports core events
[ 30.302] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 30.302] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.302] (--) evdev: Video Bus: Found keys
[ 30.302] (II) evdev: Video Bus: Configuring as keyboard
[ 30.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event5"
[ 30.302] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.302] (**) Option "xkb_rules" "evdev"
[ 30.302] (**) Option "xkb_model" "pc104"
[ 30.302] (**) Option "xkb_layout" "us"
[ 30.304] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event6)
[ 30.304] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 30.304] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[ 30.304] (**) Sony Vaio Keys: always reports core events
[ 30.304] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event6"
[ 30.304] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[ 30.304] (--) evdev: Sony Vaio Keys: Found keys
[ 30.304] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[ 30.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2b/SNY5001:00/input/input7/event6"
[ 30.304] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 8)
[ 30.304] (**) Option "xkb_rules" "evdev"
[ 30.304] (**) Option "xkb_model" "pc104"
[ 30.304] (**) Option "xkb_layout" "us"
[ 30.305] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
[ 30.305] (II) No input driver specified, ignoring this device.
[ 30.305] (II) This device may have been added with another device file.
[ 30.306] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[ 30.306] (II) No input driver specified, ignoring this device.
[ 30.306] (II) This device may have been added with another device file.
[ 30.306] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 30.306] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.306] (II) Using input driver 'evdev' for 'Power Button'
[ 30.306] (**) Power Button: always reports core events
[ 30.306] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 30.306] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.306] (--) evdev: Power Button: Found keys
[ 30.307] (II) evdev: Power Button: Configuring as keyboard
[ 30.307] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 30.307] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 30.307] (**) Option "xkb_rules" "evdev"
[ 30.307] (**) Option "xkb_model" "pc104"
[ 30.307] (**) Option "xkb_layout" "us"
[ 30.307] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 30.307] (II) No input driver specified, ignoring this device.
[ 30.307] (II) This device may have been added with another device file.
[ 30.307] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[ 30.307] (II) No input driver specified, ignoring this device.
[ 30.307] (II) This device may have been added with another device file.
[ 30.308] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 30.308] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 30.308] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 30.308] (**) USB OPTICAL MOUSE: always reports core events
[ 30.308] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 30.308] (--) evdev: USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4f
[ 30.308] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[ 30.308] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 30.308] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 30.308] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 30.308] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 30.308] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 30.308] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 30.308] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:15D9:0A4F.0001/input/input2/event1"
[ 30.308] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[ 30.308] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 30.308] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 30.308] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 30.308] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 30.308] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 30.309] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 30.309] (II) No input driver specified, ignoring this device.
[ 30.309] (II) This device may have been added with another device file.
[ 30.309] (II) config/udev: Adding input device Sony Visual Communication Camer (/dev/input/event14)
[ 30.309] (**) Sony Visual Communication Camer: Applying InputClass "evdev keyboard catchall"
[ 30.309] (II) Using input driver 'evdev' for 'Sony Visual Communication Camer'
[ 30.309] (**) Sony Visual Communication Camer: always reports core events
[ 30.309] (**) evdev: Sony Visual Communication Camer: Device: "/dev/input/event14"
[ 30.309] (--) evdev: Sony Visual Communication Camer: Vendor 0x4f2 Product 0x3f5
[ 30.309] (--) evdev: Sony Visual Communication Camer: Found keys
[ 30.309] (II) evdev: Sony Visual Communication Camer: Configuring as keyboard
[ 30.309] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3:1.0/input/input15/event14"
[ 30.309] (II) XINPUT: Adding extended input device "Sony Visual Communication Camer" (type: KEYBOARD, id 11)
[ 30.309] (**) Option "xkb_rules" "evdev"
[ 30.309] (**) Option "xkb_model" "pc104"
[ 30.309] (**) Option "xkb_layout" "us"
[ 30.310] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event9)
[ 30.310] (II) No input driver specified, ignoring this device.
[ 30.310] (II) This device may have been added with another device file.
[ 30.310] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event10)
[ 30.310] (II) No input driver specified, ignoring this device.
[ 30.310] (II) This device may have been added with another device file.
[ 30.310] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 30.310] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.310] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.310] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.310] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 30.310] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.310] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.310] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.310] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 30.310] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 30.310] (**) Option "xkb_rules" "evdev"
[ 30.310] (**) Option "xkb_model" "pc104"
[ 30.310] (**) Option "xkb_layout" "us"
[ 30.311] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event13)
[ 30.311] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 30.311] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 30.311] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 30.311] (II) LoadModule: "synaptics"
[ 30.311] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.311] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.311] compiled for 1.16.0, module version = 1.8.0
[ 30.311] Module class: X.Org XInput Driver
[ 30.311] ABI class: X.Org XInput driver, version 21.0
[ 30.311] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 30.312] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.312] (**) Option "Device" "/dev/input/event13"
[ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
[ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
[ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 30.403] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 30.403] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 30.404] (**) Option "TapButton1" "1"
[ 30.404] (**) Option "TapButton2" "2"
[ 30.404] (**) Option "TapButton3" "3"
[ 30.404] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 30.404] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 30.484] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event13"
[ 30.484] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[ 30.484] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 30.484] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
[ 30.484] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
[ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 30.485] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 30.485] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 30.486] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse3)
[ 30.486] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.486] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event12)
[ 30.486] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
[ 30.486] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
[ 30.486] (**) ALPS PS/2 Device: always reports core events
[ 30.486] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event12"
[ 30.486] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
[ 30.486] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
[ 30.487] (--) evdev: ALPS PS/2 Device: Found relative axes
[ 30.487] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
[ 30.487] (II) evdev: ALPS PS/2 Device: Configuring as mouse
[ 30.487] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
[ 30.487] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.487] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event12"
[ 30.487] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 14)
[ 30.487] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
[ 30.487] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
[ 30.487] (**) ALPS PS/2 Device: (accel) acceleration profile 0
[ 30.487] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
[ 30.487] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
[ 30.487] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse2)
[ 30.487] (II) No input driver specified, ignoring this device.
[ 30.487] (II) This device may have been added with another device file.
[ 30.488] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 30.488] (II) No input driver specified, ignoring this device.
[ 30.488] (II) This device may have been added with another device file.
[ 53.637] (II) AIGLX: Suspending AIGLX clients for VT switch
Any helps would be appreciated. -
Flash graphics glitch with alpha transparencies: any ideas what could be going wrong?
Hey folks, this forum has found me loads of answers in the
past through various searches but now it's time for me to enquire
about something myself...
Here's a bit of graphics I'm going to be using as part of a
larger project:
http://www.stucox.co.uk/file_dump/LogoGlitch.html
You'll see that as the mask for the logo at the top seems to
bite a chunk out of the mask on the arrows below (they've got an
alpha mask on them to make them fade towards the top)... this is
just a graphics glitch as if you get it to redraw that frame, it
redraws fine.
What could cause this? it's almost as if the two masks (the
one on the logo and the one on the arrows) are adding/subtracting
together, even though they're in totally different layers of
heirarchy, have different instance names, etc
I know that the issue is the masks as if i disable either one
or the other, it renders fine. I've also noticed similar things in
other areas of my graphics with two coinciding masks causing
glitches.
The one solution I've found (short of removing my
transparency, but I want to keep that as part of the design!) is to
make the movieclip containing all of the arrows to move very slowly
(at least one pixel per frame seems to do it), which seems to stop
the glitching - no idea why, other than that it might be forcing it
to redraw properly?
I've tried playing around with the bitmap caching on just
about every movie clip in the movie and all sorts...
Any thoughts?Thanks for the reply, sorry it's taken me a while to get back
on.
This is all going to be over the top of a bitmap background.
No, you're right - this doesn't come anywhere near 10 alpha layers.
The arrows are just bezier shapes I've drawn myself.
And yeah, I can't really afford to make it low quality (I
think the only reason that works is it then ignores alpha
transparency), this is all going to be an "impressive" minsite for
a big clubbing event in London!
Obviously I can just tone down some of the animation a bit -
make the arrows part of the bitmap background rather than tweening
them on screen etc, but I'd really like to understand what's going
wrong here to try and avoid it in the future!
Maybe you are looking for
-
Duplicate partitions, need help to understand and fix.
So I was looking for a USB that I plugged in and went into /media/usbhd-sdb4/miles and realized all its contents was from my home directory. So I created a random file in my home directory to see if it would also update /media/usbhd-sdb4/miles , and
-
MS Outlook send/receive data file missing
Whenever I open up MS Outlook 2007, I get an error message: "outlook cannot start because a data file to send and receive mail cannot be found. To add a data file, such as a person folder file, double-click the mail icon in windows control panel." I
-
In the Intune account portal when I try to assign a Intune license to a user I get the following error : There was a problem with this user's license assignments. The user has Intune already installed and is linked to the designated user. Any idea wh
-
CD-rom not opening correctly...
...I purchased a study guide with a cd-rom. The Book says it's for Microsoft windows but online it may also be used for mac users. So I inserted the disk and it asked me choose an application. How do I know which one to use? While putzin' around to t
-
Where do I find the lesson files for LR4?
I bought the LR4 Classroom in a Book ebook and I am trying to get the lesson files to use for the lessons to learn LR4.