Something strange happend to my system (new here)

I am new here i hope this is under right thread
Well first I dident have the system o/c at the moment it was at stock speed (i had flash the bios to 1.50 and it workt fin but after a will the system), I was in windows and all the suddent the comp just restarted and began to pip, i turnd off the comp and turnd it on after a will and still piped, so I took out the cmos battery and it fixt the problem, but now  i cant o/c any more them system freez and when I restart it it says that the system have gone in to safety mode and that I should reset the o/c i did and the system works fin after that but i cant o/c it. What can the problem be here???
Thanks (I know may english is bad )
Setup
AMD64 3000+
Msi k8n neo plat
1GB TwinMos ram

Wy temps are fine the only thing thats not is my PSU its a Sweex 400W
the rails is 12V 12A 5V 40A

Similar Messages

  • Something strange happend to the screen

    I don't know what happend to my 4th generation iPod Touch, but the i get a white screen and cant turn it on:

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. I supect the screen is damaged, especially in the lower right-hand side.
    Apple Retail Store - Genius Bar       

  • I use AOL for my sins and I have to open Mail Inbox for the red alert to appear on the Mail icon in the Dock. How do I get the red alert to appear first? I have obviously tweaked something, because it used to do that. I'm new here, my MacBook just 5 days.

    LOL.....I'm new here and I thought I had to type all my question in the Title Box.....LOL
    Anyhow, I think you get the gist of it.
    TIA
    Dave in Wales

    https://discussions.apple.com/thread/5478798
    This has solved the problem.....see vol7ron

  • New here and have ???'s

    Hello,
    I'm new here and I have been thinking of getting
    Dreamweaver for some time now. I have been using MS FrontPage and a
    product that works off of it called FrontLook. I was told that MS
    FrontPage put in a lot of extra code that wasn't needed and was
    making the pages load slower. Also I had problems with what I made
    up and how it would load up it would never be the same as I
    designed. So I thought that Dreamweaver would be the way I should
    go. Do I need to get all the extras like in the "Creative Suite 3"?
    I do want my site to stand out and grab the attention of people
    who come and visit but not a lot of stuff that would make it
    childish. Oh I have also use “HotDog” by “Sausage
    “Works” and was not happy as they do not have a good
    support system there. I was also thinking of getting Photo Shop for
    my use with the camera. Also hoping that Photo Shop has a good
    graphic design program built into it!?! What should I get? Thanks
    in advance, I know that there were a lot of questions here and I do
    appreciate it. Tom

    thomas34461usa wrote:
    >
    Hello David,
    > Thank you for writting. I have been thinking for what I
    need to do I should
    > get the
    "Adobe Creative Suite 3 Web Premium" software. It has the
    > PhotoShop and Dreamweaver in the selection. Plus other
    that at this date I'm
    > not familar with such as: Illustrator® CS3,
    Contribute® CS3, Bridge CS3,
    > Version Cue® CS3, and Device Central CS3.. Like you
    I too got sick and tired of
    > MS Frontpage and just couldn't see myself forking over
    more money to a product
    > I was no longer sold on. I know that all of this will be
    exspensive, but well
    > worth it in the long run. What do any of you know of
    using the Creative Suite 3
    > Web Premium and how it ties into Interakt Kollection
    extensions? Or should I
    > just not get the Interakt Kollection extension if the
    CS3WP is enough? Thanks
    > again.
    >
    Sorry; I'm not really familiar with Interakt. I guess you
    could just
    purchase CS3 and see if it does everything you need, then
    purchase
    Interakt or other software if you need something CS3 doesn't
    offer.
    I think Illustrator would be a great program, though I've
    used it very
    little, and that was years ago. I believe Illustrator is used
    more for
    simple illustrations, line drawings, etc., rather than for
    touching up
    photos. You can also use it to work with SVG images, which is
    something
    that interests me.
    I haven't used any of the other programs you mentioned.
    Contribute is a
    program designed to let amateurs easily publish information
    online, I
    believe.
    I'd also like to get Flash. I'm not a big fan, but they say
    it can
    actually be pretty cool if used properly. Also, I would
    expect Adobe to
    make some big improvements with it.
    Another program that might interest me is Fireworks. It was
    Macromedia's
    answer to Photoshop; not as extravagant but more adapted to
    creating
    images for websites. I think I read where Adobe kept
    Fireworks and
    upgraded it along with the other programs. If so, it might
    have some
    nice features.
    www.geobop.org - Family Websites
    www.invisible-republic.org - Adult political websites (Mature
    adults only)

  • Noticed something strange after 10.5.6 update

    Has this happened to anyone else?
    I updated to 10,5,6 and now when I start up, there's something strange at the log in window.
    Right under MAC OS X, it shows "Marty's Mac Pro (2)" I never had a (2) before, and wonder if there is something wrong here. Same when I go into System Profiler, top left corner, the name of my Mac is Marty's Mac Pro (2).
    Help?

    Change it in the Sharing preference pane.

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • The spanning-tree add strange value when I create new Vlans

    Hi,
    On all switchs access, the spanning-tree add strange value when I create new Vlans from Distrib Layer,
    and no association is created with any interface with spanning-tree vlan 700, see below in this exemple,
    until I reboot the switch.
    somebody already saw this values ?
    DSFDS112#sh span sum
    Switch is in rapid-pvst mode
    Root bridge for: none
    EtherChannel misconfig guard is enabled
    Extended system ID           is enabled
    Portfast Default             is disabled
    PortFast BPDU Guard Default  is disabled
    Portfast BPDU Filter Default is disabled
    Loopguard Default            is enabled
    UplinkFast                   is disabled
    Stack port is StackPort1
    BackboneFast                 is disabled
    Configured Pathcost method used is long
    Name                   Blocking Listening Learning Forwarding STP Active
    VLAN0001                     0         0        0          3          3
    VLAN0002                     0         0        0         22         22
    VLAN0006                     0         0        0          3          3
    VLAN0007                     0         0        0          8          8
    VLAN0009                     0         0        0          4          4
    VLAN0010                     0         0        0          3          3
    VLAN0011                     0         0        0          3          3
    VLAN0012                     0         0        0          3          3
    VLAN0013                     0         0        0          3          3
    VLAN0090                     0         0        0         15         15
    VLAN0109                     0         0        0          3          3
    VLAN0200                     0         0        0          4          4
    VLAN0300                     0         0        0         26         26
    VLAN0302                     0         0        0          4          4
    VLAN0700               -   253  -1872756560  2087191206  -1872756549  2080375982
    VLAN0702               -   253  -1872756560  2087191206  -1872756549  2080375982
    VLAN0704                     0         0        0          4          4
    VLAN0710               -   253  -1872756560  2087191206  -1872756549  2080375982
    VLAN0816                     0         0        0          3          3
    VLAN0820                     0         0        0          3          3
    20 vlans               -   759  -1323302384  1966606322  -1323302237  1946160764
    DSFDS112#sh span vlan 700
    VLAN0700
      Spanning tree enabled protocol rstp
      Root ID    Priority    4796
                 Address     0008.e3ff.fcbc
                 Cost        10000
                 Port        608 (Port-channel1)
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
      Bridge ID  Priority    62140  (priority 61440 sys-id-ext 700)
                 Address     885a.9213.6880
                 Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
                 Aging Time  300 sec
    Interface           Role Sts Cost      Prio.Nbr Type
    Po1                Root FWD 10000     128.608  P2p
    DSFDS112#sh run int Gi1/0/25
    Building configuration...
    Current configuration : 194 bytes
    interface GigabitEthernet1/0/25
     description Station12
     switchport access vlan 700
     switchport mode access
    end
    DSFDS112#sh span interface Gi1/0/25
    no spanning tree info available for GigabitEthernet1/0/25
    DSFDS112#sh int status interface Gi1/0/25
    Port      Name               Status       Vlan       Duplex  Speed Type
    Gi1/0/25  Station12          connected    700          full    100 10/100/1000BaseTX
    Thanks for your help,
    Regards.

    Venki,
    The ORA-00942 is okay because there is no existing object. But what stuck me is the ORA-01921 error which may indicate that this might not be a new database.
    CREATE ROLE exp_full_database
    ERROR at line 1:
    ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
    CREATE ROLE imp_full_database
    ERROR at line 1:
    ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
    Are there any existing databases on this server? Have you tried to create it on other machine?I searched on Metalink too and found Doc ID: 237486.1 ORA-29807 Signalled While Creating Database using DBCA which say that eroror could be ignored. You may want to review that as well.
    Ittichai

  • Hello - I am new here.  My 2011 imac is really slow and keeps showing the spinning ball in all applications.  Is there a way to diagnose what is wrong?  I have lots of space left.  Thank you

    Hello.  I am new here and have suddenly developed problems with my 2011 imac.  Mac osx 10.7.5
    The spinning ball keeps coming up with everything I do and eveverything is slow.  Even my keyboard and mouse are acting up.      I have 12gb memory and lots of storage space left. 
    Thank you

    Janis500 wrote:
    Thank you so much.  I will do that in the morning before I take any further steps.  I really appreciate your help. 
    J
    If you try to access Spotlight in the morning and it is still indexing, reindex it by following these steps.
    http://support.apple.com/kb/HT2409
    Sometimes the index is corrupted, or something it is trying to index is, and it hangs up like that.
    Re-indexing may free that up and let it work correctly.

  • When my wife tries to update one of her apps a strange Apple ID pops up. Her Apple ID is correct in settings and in the apple store. What does this mean? Where did the other one come from?

    When my wife tries to update one of her apps a strange Apple ID pops up. Her Apple ID is correct in settings and in the apple store. What does this mean? Where did the other one come from?

    There is something on your iPhone (a music file, iBook, document or video) that belongs to another Apple ID.  Only your wife would know how that file arrived there.  Your iPhone is asking for the correct Apple ID for all of the files that are resident on the iPhone.

  • Hi i'm new here, i wanna ask about supercell game Clash of Clans, i think someone hacked my village, yesterday i used my dad's phone which is Android to play coc, since then someone from another device keep playing and even taking gems, i've tried t

    Hi i'm new here, i wanna ask about supercell game Clash of Clans, i think someone hacked my village.
    Yesterday i used my dad's phone which is Android to play coc, since then someone from another device keep playing and even taking gems, i've tried to log out and even change my gmail account, but it's not working, what should i do?

    That is priceless!!!  Thanks!  I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement.  Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
     My error msg is a little different from those previously stated, but close:  0xc18a0201.  Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100.  I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
    Oh heavens, I've had the c6280 a whopping 2 1/2 years!   I'm sure they want us poor slobs to have to buy a new one every year & a day!  To say nothing of the exorbitant prices for ink.  And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!!   Yeah, & what's with that not being able to print in BLACK if a color runs out????
    Anyway I really loved your essay!   It's a classic!  And says it all!  I hate that we have to be 'slaves' to the electronic 'wonders'!!!

  • Something strange when archlinux start up

    Hi,
    I have something strange when archlinux starts up.
    At the beginning, the resolution of screen is the same with the resolution setting in menu.list of GRUB. Then after the prompt "bring up lookback interface OK", the screen splashes one time, then the resolution of screen changes to a higher one.
    Anybody has encountered this problems?
    Thanks

    Thank you. It works
    hokasch wrote:
    Well, if you want to turn it off or get high resolution from early boot, look here: Intel Graphics Wiki.
    correction: KMS is required since xf86-video-intel 2.10

  • Hello all, new here to MSI, some overclocking questions

    Hey everyone, new here to MSI products (a mobo, P45 Platinum) and forum.  I recently came from the 680i chipset and decided to try out these P45.  From reading a lot of things from various forums and here at https://forum-en.msi.com/index.php?topic=119345.0, it seems that there is a challenge (and the rewards !!) to overclocking the P45. 
    In any case, my questions are:
    1.  I know this has probably been answered somewhere but I've yet to concisely concluded, do you need to remove the on-board jumpers to overclock if you are trying to achieve over 1600 Mhz FSB?  I currently have the jumpers off.
    2.  I've notice that the GTLREF voltage is not within 63% of the CPU VTT using the latest beta bios A7512IMS.153 [v1.5b3].  Is that right? 
    3.  Anyone have any experience using the RAM modules I have?  See sig for details.
    4.  Green Power Center crashes in Vista when making changes.  Is there a unknown compatibility issue?  I've have installed fresh copy of Vista.

    Quote
    do you need to remove the on-board jumpers to overclock if you are trying to achieve over 1600 Mhz FSB?  I currently have the jumpers off.
    Removing the jumpers will set the FSB Frequency to 400 MHz and force the system into a default-400 MHz Strap.  You should also be able to overclock manually in BIOS starting from other jumper position.  Just test and see which one works best for you.  It may be the default position or the 400 MHz position (jumper removal). 
    Quote
    2.  I've notice that the GTLREF voltage is not within 63% of the CPU VTT using the latest beta bios A7512IMS.153 [v1.5b3].  Is that right?
    How did you notice that?  What percentage does the BIOS set in your case?
    Quote
    3.  Anyone have any experience using the RAM modules I have?  See sig for details.
    That is more or less standard DDR2-800 memory which should not make any problems.  In terms of overclocking it, you have to see what can be achieved.  Memory OC Results usually vary from system to system.
    Quote
    4.  Green Power Center crashes in Vista when making changes.  Is there a unknown compatibility issue?  I've have installed fresh copy of Vista.
    Are you using the latest version?

  • Something strange in my n70

    My n70 was doing strange things year ago and its battery was going out of charge in 3 hours despite no use of it.
    I BOUGHT ANOTHER BATTERY BUT THE PROBLEM was present
    when 3g service enter my state ( egypt) , the problem was ended and the old battery was working well
    How can i understand what happened ??????
    3g service fix my phone
    it is something strange
    anyone can tell me the reason behind this mysterious behaviour will be thanked

    yes i used different chargers but nothing changed
    now , no problem as i have said in my previous post after applying 3g service in egypt.
    it is ok now but only i want someone who can explain this strange action in my n 70
    take this , my at the beginings of 3g service in egypt , it was not good .
    the time 3g works well , my mobile works well and the time 3g works improperly due to the operator , my mobile is then becoming crazy as it closes itself , battery goes out of charge in 3 hours even i donot use it
    but now thanks to God 3g works very well here and no problem
    thank you

  • Something Strange Happening?

    I'm not sure if something strange is happening but:
    Yesterday, my co-workers hard-drive on his new Macbook Pro (just a couple months old) started slowing way down. We ran Verify Disk from Disk Utility and it recommended a Repair. We booted from the Leopard install DVD and tried to repair it but he unfortunately didn't get it to work and had to go to the Apple Store for a replacement.
    Today, almost 24 hour later, my hard drive started acting up with the same problems (only I was able to repair it with Disk Utility after booting from the install DVD).
    So I did some searching on the twitterverse, and I'm finding that in the past 24 hours there have been a few more cases of people losing the hard drives.
    Could it be that the recent apple update has an issue?? I just find it really odd that my machine, which has never had an issue nor shown any sign of oddity would start having an issue 24 hours after my co-worker, whose mac was brand new...
    Anything to be concerned about or false alarm and extremely convenient coincidence?

    Welcome to Apple Discussions!
    It's hard to tell with hard drives--notebook hard drives have an average useful life of 3-5 years, but some fail almost immediately. I don't think a download would bother a healthy hard drive, but if the drive already had some problems, it might cause them to be more apparent.
    If you want to keep tabs on the physical health of your drive, you might like SMART Utility:
    http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
    You can download the demo and run it several times for free.
    There is also SMART Reporter:
    http://www.corecode.at/smartreporter/
    SMART Reporter is free and places an icon in your menu bar that is supposed to give early warning of impending hard drive failure. It actually did with the Fujitsu drive that originally shipped in my computer. I got a lot of reports of I/O errors, and when I checked with SMART Utility, the drive was failing, even though it had passed with no errors the week before when I was still under warranty.
    It's also prudent to verify the disk and repair it if necessary before downloading software. Doesn't hurt to repair permissions afterwards, even though there are a lot of them that don't get repaired.
    I can only say that with my WD Scorpio Black 500 GB drive, none of the recent updates have caused any issues.

  • My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?

    My wife and I both have the iphone and we use my macbook pro with iTunes to sync our ipods. When I do something on my iPhone it shows on hers. How do I set up her a seperate iTunes acct on my mac so she can operate independent of me?

    There's info here on setting up separate libraries and user accounts. You won't have to reload (or re-import) all the music, just copy it.
    The reason I suggest separate accounts on the Mac is because if you have the two libraries under the same user account, iTunes will also open the last library that was open in that account, and you'll always have to be mindful of which library that is. If you open iTunes and find it's not your library, you'll have quit, relaunch holding the option key and select the other library.
    No, you won't have to log in and out of the Mac. (If I'm understanding your question here.) Multiple accounts can be logged in at the same time. And with fast user switching, you can toggle between user accounts.
    I'll admit that maintaining the two libraries gets a little tricky, because if you share all the same music, you'll have to add it to one and update the other. (That won't happen automatically.) But I think Home Sharing makes this much easier to do.
    Hope that helps!

Maybe you are looking for

  • DVI to VGA or DVI to HDMI for Sony Bravia

    I have a 52" Bravia HDTV that i have hooked up to my Mac Pro (with NVIDIA GeForce 7300 GT video card) . I bought a DVI to VGA adapter since teh Bravia doesnt have a DVI port, but has a "PC" port. All my friends tell me to use "DVI to HDMI" better. Wh

  • Terminating Q-in-Q on WS-C3750G-24TS-S1U

    Hello, we have a connection from a service provider between location A and B where in location A i have an ethernet port and i configure a switch interface as trunk with 802.1q encapsulation and i try to pass vlans 421-423. in location B the ethernet

  • How to open .erd extension files in windows system

    Hi, we generated erd diagram with TOAD application from oracle database that generated a file with .erd extension . but could not able to open .erd file in our windows system for review.. please help me out which tool/utility or free software help us

  • Why is adobe running twice?

    as you can see adobe is running twice? why?? I have windows 7 32bit, latest version of firefox and adobe

  • HFM: Intercompany Data and Ownership Mgmt

    Hello All, My below doubt is for HFM, though i have posted it in correct thread of HFM still posting it here for more better responses. Apologies for inconvenience. I was going through the file format example of Interccompany data present in user's g