Something very wrong with my computer screen, please help!
Hello all,
Hopefully someone can help me!! I just got this Mac about 3 months ago, it is my first Mac. It is a MacBook Pro 15". Anyway, last night when I opened it up the screen has gone all funny & seems to be getting worse. It is kind of like on the TV when you get bad reception.
Does anyone know why it has done this? I took it with me in the car, but I don't think it got bumped around or anything like that.
i have attached some photos
thank you everyone for your help in advance!!
http://www.flickr.com/photos/55180164@N05/5122340102/
http://www.flickr.com/photos/55180164@N05/5122335136/
I think mine has got the same problem, I’m not 100% because I can’t see your problem properly because my screen is dodgy too :-p
http://www.thefootdown.co.uk/images/temp/screen-full.jpg
http://www.thefootdown.co.uk/images/temp/screen-cu.jpg
MIne is well out of warranty though, is it possible for me to fix this myself?
Thanks
Ty
Similar Messages
-
Something is wrong with my vision:M, please help
my mom recently bought me a blue zen as a present from amazon.com, it was around november 27,2006 and it worked just fine, but just today it started to act weird. It froze while i was listening to music, so i reset it. right now its stuck on recovery mode and when i try to clean it up, format it or reload the firmware, it says that "harddisk Problem." I cant seem to fix the probelm no matter how many times i try to reboot the thing. Does this mean that i have to buy a new one becuase i dont understand how this "warranty" thing is working. can someone please help me becuase i actually grew attached to my zen and it's killing me becuase i cant use it.
. my zen froze
2. i put it in recovery mode by pressing the reset button
3. i try to format and reload the firmware but it keeps saying "Harddisk problem" everytime. i cant seem to do anything from there -
"Something went wrong with your request. Please try again later."?
I ordered a Retina MacBook Pro on the 24th. Today, I went to check the status of the order and it redirected me to https://secure1.store.apple.com/ie/order/sorry saying:
Something went wrong with your request. Please try again later.
The only place I can get to is the account homepage. Anyone have any idea whats wrong?
Cheers.Hi Fionnr,
If you are in USA then you can call them their toll free number 1-800-275-2273 or otherwise if you have an Apple ID then you can raise a request on https://expresslane.apple.com/GetproductgroupList.action
They will help you further. -
I got this message when I just finished my online ordering. "We're Sorry. Something went wrong with your request. Please try again later." and I didn't get confirmation email yet but I've been charged from my credit card already. Any suggestion please?
I am having the same issue. When I try to update my payment information I receive an error that states, "We're sorry, something seems to be wrong on our end. Please try again later.
After Adobe's servers were breached I received a phonecall from my bank, stating that someone had used my credit card at a hotel in Mexico (I live in Ohio). I closed that credit card and was issued a new card. I want to update my card information on my Creative Cloud subscription. I chatted via the web with a customer service rep today. He was anable to help me. He suggested I call the Care Center. The hold was estimated at 2 hours. All I want to do is update my card information so the next time Adobe automatically bills for my subscription the transaction doesn't bounce. -
We're Sorry. Something went wrong with your request. Please try again later.
We're Sorry
Something went wrong with your request. Please try again later.
I meet the problem above when i click the button 'Check Older Status'? Who can help me?We have the same problem here in Australia too. I haven't been able to cancel my iPhone 4s I ordered online. I was able to purchase one from a retail store the last thing I need is two iPhone 4s :P
-
What's wrong with my code? please help....
when display button is clicked it must diplay the remarks but it didn't happen...
what's wrong with my code? please help
here is my code.....
import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
public class Area extends Applet implements ItemListener,ActionListener
{Label arlbl = new Label("AREA");
Choice archc = new Choice();
Label extlbl = new Label("EXPENDITURE TYPE");
CheckboxGroup extchk = new CheckboxGroup();
Checkbox fchk = new Checkbox("FOOD",extchk,true);
Checkbox schk = new Checkbox("SHELTER",extchk,false);
Checkbox echk = new Checkbox("EDUCATION",extchk,false);
Checkbox uchk = new Checkbox("UTILITIES",extchk,false);
Label exalbl = new Label("EXPENDITURE AMOUNT");
TextField exatf = new TextField("",20);
Label remlbl = new Label("REMARKS");
TextField remtf = new TextField("",30);
Button disbtn = new Button("DISPLAY");
Button resbtn = new Button("RESET");
String display;
public void init()
{add(arlbl);
archc.add("MANILA");
archc.add("MAKATI");
archc.add("QUEZON");
archc.add("PASAY");
add(archc);
archc.addItemListener(this);
add(extlbl);
add(fchk);
fchk.addItemListener(this);
add(schk);
schk.addItemListener(this);
add(echk);
echk.addItemListener(this);
add(uchk);
uchk.addItemListener(this);
add(exalbl);
add(exatf);
add(remlbl);
add(remtf);
add(disbtn);
disbtn.addActionListener(this);
add(resbtn);
resbtn.addActionListener(this);
public void itemStateChanged(ItemEvent ex)
{int n = archc.getSelectedIndex();
if(n==0)
{if(fchk.getState())
{exatf.setText("10000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("15000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("24000.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("8500.00");
display = archc.getSelectedItem();
if(n==1)
{if(fchk.getState())
{exatf.setText("5000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("11000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("7500.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("24000.00");
display = archc.getSelectedItem();
if(n==2)
{if(fchk.getState())
{exatf.setText("13000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("7000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("27000.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("6000.00");
display = archc.getSelectedItem();
if(n==3)
{if(fchk.getState())
{exatf.setText("6000.00");
display = archc.getSelectedItem();
if(schk.getState())
{exatf.setText("9000.00");
display = archc.getSelectedItem();
if(echk.getState())
{exatf.setText("15000.00");
display = archc.getSelectedItem();
if(uchk.getState())
{exatf.setText("19000.00");
display = archc.getSelectedItem();
public void actionPerformed(ActionEvent e)
{if(e.getSource() == disbtn)
{String amtstr = exatf.getText();
int amt = Integer.parseInt(amtstr);
{if(amt > 8000)
{remtf.setText(display + " IS ABOVE BUDGET");
else
{remtf.setText(display + " IS BELOW BUDGET");
if(e.getSource() == resbtn)
{archc.select(0);
fchk.setState(true);
schk.setState(false);
echk.setState(false);
uchk.setState(false);
exatf.setText("");
remtf.setText("");
Edited by: lovely23 on Feb 28, 2009 11:24 PMEdit: thanks for cross-posting this question on another forum. I now see that I wasted my time trying to study your code in the java-forums to help you with an answer that had already been answered elsewhere (here). Do you realize that we are volunteers, that our time is as valuable as yours? Apparently not. Cross-post again and many here will not help you again. I know that I won't.
-
TS2446 How do I unlock my daughters iPod touch with no computer? Please help!
HOw do I unlock my daughters iPod touch with no computer? Please help me!
If she set up Find My iPod on it before this happened, follow the instructions listed under "If you don't have access to a computer" here: http://support.apple.com/kb/HT1212. Otherwise, you would have to use a computer to restore it by following one of the other two solutions listed at the bottom of the article.
-
There's Something Very Wrong With My Macbook... Please Give Me Some Advice
I bought a new black macbook about 7 months ago:
Here are the specs:
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Basically, the fan noise is getting incredibly loud and very whiny, even with just microsoft word on... It is also getting very hot to the touch... And apparently, the bottom part of my macbook (the case) has a defect- its slightly popped out... I never dropped my macbook and it has always been in a case so apparently I must have bought it like that... Also, the computer won't wake up from sleep mode sometimes, and sometimes when I push the power button to turn it on, all I see is a blank white/grey screen and nothing happens...
It has only been a couple of months and I've already been to the apple store about three times... I am a student so I don't have the time to send it in for the approx. 7 to 10 wait period... and I am concerned that if I do not send my computer in soon, the computer will crash and all my school work will go with it. I do not have an alternate computer and I will have no time to turn it in for repair until june... I do not know what to do... When I went to the apple store, they tested it and said that there was nothing wrong with the sound (however this only happens when it's taken in), I know for certain that there is something wrong with the fan noise... My suitemates and friends who have the same computer as I do, do not have this problem... What should I do? Is there any way I would be able to get this computer replaced? I really do not have the time to send it in for repairs... What should I do?? Any help would be appreciated... Thank You!Welcome to Discussions, ddalki_kiss!
Most important thing first. You didn't list the "Boot ROM Version," which is after the Bus Speed in System Profiler. I ask due to the fact that, according to this Apple Support article:
Firmware updates for Intel-based Macs
your MacBook probably required the installation of this firmware update:
MacBook EFI Firmware Update 1.1
It isn't a question of whether or not that update was downloaded, but whether it was installed. Checking how System Profiler shows the "Boot ROM Version" is one way to find out if it was successfully installed. If it was not, download and install it, being careful to follow instructions and cautions.
It is also getting very hot to the touch...
First, the firmware update might help. Second, it is getting very hot due to the fans not being able to keep it cool enough despite running at higher speed. Can we assume that you are not using the MacBook as a laptop, but are following the cautions that it is a notebook and must have air circulation beneath it?
...sometimes when I push the power button to turn it on, all I see is a blank white/grey screen and nothing happens...
You should boot into safe mode:
http://docs.info.apple.com/article.html?artnum=107392
http://docs.info.apple.com/article.html?artnum=107393
http://docs.info.apple.com/article.html?artnum=107394
Booting into safe mode could be remedial for your MacBook. You should then restart your MacBook to return to normal use, as you will be unable to remain in safe mode and have normal use of your Mac.
If you have further problems, or if you resolve the current ones, please repost:)
Message was edited by: myhighway -
PLEASE HELP!!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Very unhappy with iPhone 5. Please help.
Hello,
I really hope someone can help me because I am very upset with my new iPhone 5. I had an iPhone 4 for quite a while and it worked great, no issues, ever. I got my iPhone 5 yesterday and have wanted to throw it out a window ever since.
It was fine until I tried to sync it to iTunes (yesterday evening).
I had to download the latest version of iTunes, so I went ahead and did that yesterday before syncing. I also downloaded the latest iPhone software update so it should be all up to date.
The last time I synced my iPhone 4 (yesterday morning), I had no problems. No photos were loaded on it and only a handful of apps I use every day (My Fitness Pal, Pedometer Pro + GPS, Facebook and Pixlr-o-matic) and a handful of songs that I purchased from the phone. This has been how every sync I’ve done with the 4 has been for months. That last sync with the 4 worked fine, no issues.
Got the new phone and the guy at the AT&T store activated it and downloaded the latest software update etc. for me. Said it was good to go. It looked okay, all my contacts were there etc. Obviously none of my apps were there but I just went to the app store and my purchased section and grabbed these 4 apps in particular.
I thought it was really cool that all the photos in my photo stream on my iPad were there too. I found this feature to be great.
Got it home and synced to my computer and ran into the following issues (and I don't know why this computer auto-formatted this so they all say 1 and I'm too aggravated right now to manually fix it ):
Text messages I received and sent in 2011 showing up in my messages section. Why??
Even though the last time I synced my iPhone 4 I had no photos, this sync suddenly wanted to sync 6000+ photos to my phone. I unchecked all the folders in iTunes--- but before it would let me do that, it made me sync all of these photos first. I then had to sync it again to get rid of them all. Currently, there are no photos on the phone which is good HOWEVER, it also got rid of the Photo Stream that had been there which I wanted there. I did not check or uncheck anything for that, it just disappeared. Why?
Apps I haven’t used in a year synced to the phone despite not being checked off. I had to manually delete them from the phone. I really only use 4 apps regularly and these have been the only 4 apps on my old phone for months. Why did the sync revert back to stuff I haven’t had on my phone for like a year?
Pedometer Pro + GPS… all my data (3 months worth) is gone. It took 3 tries to get it to sync the app itself but I had to start it over from scratch. This could be an app issue but I can’t find any support anywhere for it to find out. I’ve never had this issue with my old phone, despite syncing to iTunes frequently. The data always synced.
Pixlr-o-matic…again, this could be an app issue but all my in-app purchases (a lot of $$ worth) are gone and it expects me to buy them again. Never lost them during software updates or syncs on the old phone. I found support for this app and no one seems to be able to answer the question.
It also randomly selected a background photo to use that I haven’t had on my old phone for like a year.
My wifi at home no longer works. Even when I enter my password. It worked when I first got the phone home and went in and put the password in for my wifi network at home. But as soon as I synced it, the wifi stopped working and now it won’t even take the password.
Same thing with my email. They set it up for me in the store and it worked but now, after the sync, it doesn’t.
I’m frustrated and baffled (and missing my old phone). I don’t even know if I’m describing this correctly. I’ve spent the entire night searching for answers and can’t find any. At this point, I think I might just return the 5 and have them reactivate the 4. Unfortunately, this phone was a gift and I cannot feasibly get to the store where my dad and I picked it up yesterday for at least two weeks as my dad (and the store) are about 2 hours away.
Before I make the 2 hour trip to return it, is there ANYTHING I can do to fix these problems?https://discussions.apple.com/docs/DOC-3763
-
What is wrong with this!! please help
Hello friends,
I'm a learner and I have done lot of JDBC connectivity with Acess database, and now I want to connect java program with oracle database, but the problem is I have downloaded the oracle driver, set the classpath, and I have created the DataSource Name with MS-ODBC, I could able to compile but I'm getting run time exception, please help me with this. regards, shabeer.
the program is
import java.sql.*;
public class ShabeerJdbc {
public static void main(String args[]) {
// String url = "jdbc:oracle:thin:@imran:3339:shabeerjdbc";
Connection con;
String createString;
createString = "create table COFFEES " +
"(COF_NAME VARCHAR(32), " +
"SUP_ID INTEGER, " +
"PRICE FLOAT, " +
"SALES INTEGER, " +
"TOTAL INTEGER)";
Statement stmt;
try {
System.out.println("shabeer1");
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
System.out.println("shabeer2");
} catch(java.lang.Exception e) {
System.out.println("shabeer3");
System.err.print("ClassNotFoundException: ");
System.out.println("shabeer4");
System.err.println(e.getMessage());
try {
System.out.println("shabeer55");
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:shabeerjdbc", "system", "mehar");
System.out.println("shabeer6");
stmt = con.createStatement();
System.out.println("shabeer7");
stmt.executeUpdate(createString);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
the run time error is ......
C:\JavaPractice>java ShabeerJdbc
shabeer1
shabeer2
shabeer55
Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoint
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at ShabeerJdbc.main(ShabeerJdbc.java:38)
****************************************HI Deriderj, thanks for your response, well I have changed the Datasourse name to SID which is "Imran" and still it is not working....do I need to download anymore driver or whether they be bundled with the ojdbc.jar, please advice me. What if I want to use another driver as you mentioned...not to use thin: what other drivers will be available for the Oracle9.2.0.1.0 please advice me, thanks a lot
My SID name is "Imran"
listening port is is 1521
odbc datasource name is "shabeerjdbc"
I'm a very biginner and I'm facing too much problem, please help me. Well I have got Oracle9.2.0.1.0 loaded as the database and soon after I intstalled it I have copied ojdbc14.jar into my java classpath and I'm trying to connect to this data base. I dont know what driver I should use, neither I downloaded any. I'm just mentioning thin: in my URL. But It is giving error, can u please tell me what driver should I mention in the URL, and why I'm getting this error, Here is the code that is compiling without errors.
import java.sql.*;
public class ShabeerJdbc {
public static void main(String args[]) {
Connection con;
String createString;
createString = "create table COFFEES " +
"(COF_NAME VARCHAR(32), " +
"SUP_ID INTEGER, " +
"PRICE FLOAT, " +
"SALES INTEGER, " +
"TOTAL INTEGER)";
Statement stmt;
try {
System.out.println("shabeer1");
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
System.out.println("shabeer2");
} catch(java.lang.Exception e) {
System.out.println("shabeer3");
System.err.print("ClassNotFoundException: ");
System.out.println("shabeer4");
System.err.println(e.getMessage());
try {
System.out.println("shabeer55");
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:Imran", "system", "mehar");
System.out.println("shabeer6");
stmt = con.createStatement();
System.out.println("shabeer7");
stmt.executeUpdate(createString);
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.println("Sql Exception" + ex.getMessage());
************The runtime Error it is giving is *********************
C:\JavaPractice>java ShabeerJdbc
shabeer1
shabeer2
shabeer55
Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/Savepoint
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at ShabeerJdbc.main(ShabeerJdbc.java:38)
***************************** please help me.... -
i recently deleted some files from my compter and now my phone, a Galaxy 3 will no longer sink with my home pc...Please help
Hello BCoufalik
Let's see if we can get that galaxy S3 connected with your PC. Here's a great link that will help with Syncing: http://search.verizonwireless.com/?q=sync galaxy s3 &x1=p1&q1=support
JoeL_VZW
Follow us on Twitter @VZWSupport -
I have tried, Firefox, Chrome and Safari. My Macbook is running 10.5.8. I have cleared my cache, cookies and browsing and download history. Sometimes I get so far as to be able to access my accounts page and then I can't access any other page on the site like on-line bill pay. Mostly, nothing happens after I put in my user ID. Sometimes I get an "error with the server," and sometimes I don't. Sometimes one user ID gets me a little futher (to the passwords page) and sometimes it doesn't. I've downloaded Adobe Shockwave Flash. This is not happening with any other sites and my husband can access the BOA site with his computer using the same user Id's and passwords using the same internet connection I am using. Any help and advice will be greatly appreciated!
Thank you!The versions shown are the last ones available for Leopard.
Java 1.4.x is no longer supported, which is why it's off.
If you're still not getting functionality, try enabling it for a short time in case they're using old code.
The only other thing I can think of is that they're using later versions because of the security issues and may not be compatible, but I'm guessing there. (Lion was up to 1.6.0_35 I think - may be higher by now).
Time for someone with a deeper knowledge of Java than me.
I know we have a number of Java developers contributing to the forums, hopefully one will pick it up.
it may help to start a new thread specifically about the Java issue - that would be more likely to attract fresh attention. -
Whats wrong with these joins? Please help
I have 2 tables
EXAM_QUESTIONS: question_Id, language_id, category_id, question_text, is_active
EXAM_RESPONSES: question_Id, chosen_answer, is_correct
and I am trying to get report in following columns
QUESTION ID | TIMES ASKED | TIMES CORRECT | CORRECT % | OPT A CHOSEN | OPT B CHOSEN
and I am trying to use following query without luck (although query runs but numbers are not summing up!)
select eq.question_id,
count(er1.QUESTION_ID) as times_asked,
count(er2.QUESTION_ID) as times_correct,
count(er3.QUESTION_ID) as Answer_A_Selected,
count(er4.QUESTION_ID) as Answer_B_Selected,
eq.language_Id,
eq.category_Id
from exam_question eq left join EXAM_RESPONSE er1 on (eq.QUESTION_ID = er1.QUESTION_ID)
left join EXAM_RESPONSE er2 on (eq.QUESTION_ID = er2.QUESTION_ID AND er2.IS_CORRECT = 'T')
left join EXAM_RESPONSE er3 on (eq.QUESTION_ID = er3.QUESTION_ID AND er3.CHOSEN_ANSWER = 'A')
left join EXAM_RESPONSE er4 on (eq.QUESTION_ID = er4.QUESTION_ID AND er4.CHOSEN_ANSWER = 'B')
WHERE eq.IS_ACTIVE = 'T'
group by eq.QUESTION_ID, eq.CATEGORY_ID, eq.LANGUAGE_ID
order by eq.language_id, eq.category_id
someone please help. Am i joining tables correctly?
Thanks in advanceHi ,
As i know oracle has left/right outer joins , not simply as left join.
Left outer join: Oracle8i
select
last_name,
department_name
from
employees e,
departments d
where
e.department_id = d.department_id(+);
Left outer join: Oracle9i
select
last_name,
department_name
from
employees e
left outer join
departments d
on
e.department_id = d.department_id; -
Is there something very wrong with Lion and Fcp x or what?
I have just spent a very frustrating two weeks editing a one hour fifteen minute project on FCP X with Lion as the operating system. Every edit session has been plagued with crashes. My mac is a 21.2 inch, with an I7 processor and 12gig of ram which I bought the middle of this year. I had set my computer up with two partitions, one with Lion and the other with Snow leopard. This morning, in an effort to improve the terrible instability of FCP X under Lion I decided to try it under Snow Leopard......What an unbelievable difference.....I've been editing for the last three hours now throwing all kinds of clips and effects and so forth at the timeline and have not experienced one crash. What is going on here? How can Lion and FCP X be so incompatible?
dpcam1 wrote:
I have just spent a very frustrating two weeks editing a one hour fifteen minute project on FCP X with Lion as the operating system.
You don't mention whether this one hour and fifteen minutes long project consisted of just one FCP X project when you experienced problems with FCP X and Lion?
You also don't mention how long the project was that you edited successfully with Snow Leopard. If, as I suspect, this was a very short 'test' project, that would make sense. FCP X does not cope well with long projects.
I use Lion exclusively but I keep my projects to a maximum of 30 minutes (preferably no more than 20 mins). If the total programme is longer, I make create several FCP X projects - each being a 'chapter' of the main programme. When finished, I make compound clips of all the 'chapters' then I paste them into a new (full length) project.
I'm not pretending FCP X is perfect, but for me at least, it's very workable as long as you understand it's weaknesses. I have 16 GB RAM and since I upgraded from the 8 GB I had previously, it's made a huge difference.
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Andy
Maybe you are looking for
-
ZEN Vision M, will not start up or charge at all.
Hello, I have tried letting the player charge (even though it doesn't show that it's charging) on my computer USB for about 4 hours now, and still nothing... I tried the restart button, nothing... I tried holding the power switch on and restart butto
-
EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER
Dear All, While creating vendor excise invoice by Tcode: J1IEX it is throwing error AS MENTIONED BELOW, EXCISE GROUP H1 NOT RELEVENT FOR PLANTS IN PURCHAGE ORDER Kindly help in this matter. Regards AJIT K SINGH
-
I am trying to attach a document that was created on the same computer to an email. i continue to get an error message that indicates the document is in use, that i must close it, and retry. i can't find where it is in use. i have closed "word" wh
-
Need a table for the texts of the field names of a table
Hi Experts, I need to find out a table wchich has the following fields, Table name,Fieldname and fieldname Text,. I have tried , but not found such table. Thanks in advance, Harshit Rungta
-
Using Change Data Capture in SSIS - how to handle schema changes
I was asked to consider change data capture for a database recently. I can see that from the database perspective, its quite nice. When I considered how I'd do this in SSIS, it seemed pretty obvious that I might have a problem, but I wanted to conf