Something wear is going on with my iPod

Hello!
I didn't know where else to post, so I'm going to post it here.
Basicly problem is that I can't get my iPod running at all. The weard thing is that it's working now and than. Here is how things developed:
I was using it like regulary, until one day, all my music was gone. iPod wasn't responding at all, so I just kept it in a drawer. Couple of days ago I've tried to reconnect it to iTunes. Didn't work, not only iTunes, half of my computer frozen. When I disconnected it from USB cable, everything was working fine. I can't remember how, but somehow I formated it. Installed new iTunes and after 1 hour, it showed iPod connected. With formating, there wasn't anything on iPod, so I chose to update the system, setting things right on this thingie. After update, I had to plug it on adapter due to low battery.
Next day I connected it to comp and again needed app. 1 hour for iTunes to recognise it. I synced it and than tried to add some music to it. Added songs to library and started syncing. Somewhere at the middle it showed an error about song being read-only and than iTunes froze. Since than, my computer doesn't even recognise this iPod anymore.
Any suggestion what to do since I've tried everything and it seems to be futile. I doubt disc went to ****, otherwise it wouldn't be formating and updating.
Thanks in advance.
Flesh

Ok tried it again today: iTunes asked me to restore iPod. Tried it once, but it didn't work. So I formated it and than restored it with iTunes. After almost fully restoring it, iTunes asked me to connect it to other power source to finish the restoring process. When I do, folder icon with an exclamation point shows and doesn't do anything.

Similar Messages

  • I am not sure what is going on with my ipod but my ipod will not even let me open my wifi or open my apps. i don't know why can anyone help?

    I am not sure what is going on with my ipod but my ipod will not even let me open my wifi or apps. I don't know why can anyone help?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Something weird is going on with Compressor 4 Version 185673

    Something weird is going on with Compressor 4 (v185673).
    I've just completed a 1.5hr edit in FCP X (v10.0.1) and chose to send it to compressor so I can encode my MPEG-2 files.
    It takes approximately 5min for compressor to open and show the job to start with!
    I then drag the MPEG-2 preset and click on it, the spinning ball comes up and takes approximately 10min before compressor reacts...!
    Wondering if anyone else is having the same experiencing?

  • My ipod is really beggining to irritate me,wheni finally get apps sent to my ipod touch they are still saying "waiting..." and now the apps picture on all of them is blank and i still haven't dowloaded one app successfully.What's going on with my ipod?

    My ipod is really beggining to irritate me,when i finally get apps sent to my ipod touch thay are still saying "waiting...."and now the apps picture on all of them is blank and i still HAVE YET TO DOWNLOAD ONE APP SUCCESSFULLY! What's going on with my ipod & how do i fix it?

    Have you tried a hard reset of your iPod yet?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If that doesn't work, are you still connected to a network?  Either way try connecting to a different one and downloading another FREE app to see if that helps.
    B-rock

  • What is going on with my iPod classic replacements?

    Okay, so I'm on my 4th replacement of my iPod classics. Still having hard drive issues, the songs are skipping the iPod shuts down randomly and it has 0 allocs and bad sectors in the SMART data yet 16 retracts after 2 weeks. I'm also getting excessive vibrations and clicking from the internals all pointin to yet another failing hard drive. I'm furious this was 140 dollar swap for my old dead iPod and every iPod I've had replaced, this being the 4th for hard drive issues. I pointed out the 12 retracts it had on it before even leaving the store to the genius and he said it was fine yet now I'm getting hard drive failure symptoms again. What is going on because I'm so close to writing the attorney general for apple replacing my broken iPod with "new" iPods that I point out to be broken yet these "geniuses" think they are fine

    Yep, I think that Genius, deosn't know what a lemon looks like, it is a case of bad lemon sold, since you have already pointed out the bead retract numbers.

  • What is going on with my iPod?

    Ok so today I was listening to music on my iPod. I changed the song and it kept skipping to the next one, then to the next one. I reset the iPod then it displayed the "sad iPod." So it would not turn back on. I plugged it in my computer, nothing happened. I let it sit for about 2 hours, then reset it again and now it is working fine. What is going on? I had this problem before and I restored it and now I am back to this. Thanks guys.

    Mine is doing the same thing. But this time it won't respond to anything. It responded for about a second when I first hooked it up and showed me the apple icon and the sad iPod icon....and I left it charging for hours with no response this time...I'm puzzled as well....if you happen to figure it out, please let me know.

  • MSI 870-G45 - something odd is going on with MSI

    Ok, this is convoluted but bear with me.
    I bought the MSI 870-G45 (MS-7599 v2.x) motherboard from Newegg. Newegg listed the chipset as the AMD 870. However, when I received the motherboard, the manual states that the chipset is actually the RX 780 (a.k.a. AMD 770 a chip from 2007/08!), I checked in CPU-Z and confirmed this. I built a rig with this motherboard on 8/15/2010.
    I have been having all sorts of issues. These include memory errors when running memtest86+ or HCI memtest.
    Today I come on to the MSI website to do some research on the motherboard and I see that the MSI 870-G45 is now listed as a "NEW" product and the chipset is now the AMD 870, as I originally thought. In fact, MSI has two versions of the 870-G45, depending on what link you visit. See the two links below:
    http://www.msi.com/index.php?func=prodmbspec&maincat_no=1&cat2_no=&cat3_no=&prod_no=2070
    http://us.msi.com/index.php?func=prodmbspec&maincat_no=1&cat2_no=171&cat3_no=&prod_no=2019#menu
    The version I ended up with is the one in the first link.
    Now, I have the AMD Athlon II X4 635. The product info page at AMD states that the voltages should be between .85v and 1.25v. ( http://products.amd.com/en-gb/DesktopCPUDetail.aspx?id=625 ) However, even though the BIOS of this motherboard (the version with the 770 chipset, which is the one I got) supports this CPU, the "Auto" CPU voltage setting sets the voltage at ~1.35v - above the specs specified by AMD! Wondering if this might also be a cause of the difficulties I am having, I lowered it to 1.12. Running some more tests to see if this has improved stability.
    So, two versions of one motherboard, with confusing numbering and Auto voltage that exceeds the specs from the CPU manufacturer. What the heck is going on?
    Another issue is that the manual states on page 2-6 (21 on the PDF) states that to be in dual channel mode, I need to put my two DIMM cards in the slots DIMM1 and DIMM2. However, further down the page under the heading "Important", it states:
    In Dual-Channel mode, make sure that you install memory modules of the same type
    and density in different channel DIMM slots.
    This seems to be contradictory, but it is probably just me. Does it mean I install the two DIMMs in DIMM1 and DIMM2 or DIMM1 and DIMM3?

    Thank you both for your input. I mistakenly thought this was run by MSI. Feel stupid. But since you were so kind to respond, I'll post my full system specs as you suggested:
    AMD Athlon II X4 635 CPU
    MSI 870-G45 AM3 Motherboard
    G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (F3-12800CL9D-4GBNQ)
    GIGABYTE 1GB GeForce GTX 460
    SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM
    ASUS DRW-24B1ST SATA 24X DVD Burner
    OCZ ModXStream Pro OCZ600MXSP 600W ( +3.3V@25A, +5V@25A, +12V1@25A, +12V2@25A, [email protected], [email protected] )
    OS: Windows 7 Ultimate 64-bit.
    Also just discovered that there are two versions of my CPU (C2 and C3 revisions). Perhaps that is where some of the confusion regarding voltages lie. Again, feel stupid.
    Issues in a nutshell:
    Computer ran fine for about 10 days. Then booted up a game and got crazy artifacts everywhere. Windows 7 also showed some artifacts when I went back to desktop. OS never crashed though. Windows has never crashed. Because of this, I suspected that my GPU went bad. Ran OCCT GPU test, Furmark and ATI tool and have artifacts on all three. Artifacts appear immediately upon starting test, so I don't think it is temperature related. Temp of GPU is under 40 C idle and highest under load is 77 C, which falls in line with what I read in reviews for card.
    Now, before RMAing by video card with Newegg, I decided to download memtest86+ and run it. Just a hunch. I got an error on the first pass in test 2. However, I continued to run the test and saw no more errors. Ran the test again overnight for hours and could not recreate error. Thinking I may have gotten a false positive, I ran HCI Memtest (this one runs in Windows) and ran it for a few hours. That reported multiple errors as well. Now I am trying to run the test with one DIMM at a time to see if I can isolate which stick it is.
    So I guess my questions are:
    * What are the chances that I got a bad GPU and bad RAM from Newegg? Anything is possible but I thought that getting two lemons was unlikely, and when I then saw the discrepancies in the motherboard info on MSIs website I started to wonder.
    * Could bad DRAM have any effect on GPU - as in displaying artifacts. Or would this strictly be a GPU issue?
    * A member at another forum warned against leaving voltage settings in BIOS at Auto. This is what led me to look up the specs at AMDs website. What do you think about this recommendation.
    Sorry if I came off a little harsh, I thought I was addressing MSI the company and was a bit miffed by two different versions of a board and with the fact that newegg was improperly stating the specs.
    I appreciate any help you can give.

  • Whats going on with my ipod nano any 1 plzz help me

    does any 1 know y when i install itunes on to my pc(i have windows xp) my logo of my dvd rom drive disapears and i cant play any dvds or music cds or install any software its like the itunes and ipod software is stoping it from working plzzz help i donnt know whats going on

    It wasn't designed to do it.

  • ARRGH wat is going on with my ipod?!!!

    i hate my ipod vid...Out of nowhere, almost all the videos i had on it are gone and wont go back on it,and all of the songs from itunes that i bought to put on it are gone and wont go back on now. WHAT IS THE DEAL WITH MY IPOD

    well what i do is i either re-update the ipod to see if anything happens and i also drag the songs over the ipod to see if they will go on it...and nothing happens. no pop up or anything

  • Something weird is going on with my iPhoto library!

    Help! I tried to import a photo from my scanner and it didn't work. The only problem now is that each time I start up iPhoto I get a message...
    "A photo has been found in the iPhoto Library that was not imported. Would you like to import it?"
    Whether I choose Yes or No I get the following message...
    "Unreadable files: 1. The following file could not be imported." It then puts the file in a iPhoto recovered photos folder in my shared area.
    This on its own wouldn't be a problem (just a nuisance) but since then I have been unable to import photos from anywhere else into iPhoto. When I try I get a different message that says...
    "Unreadable files: 6. The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
    I'm pretty sure the files are fine I can copy them to the computer and view them as jpegs but I can't get them into iPhoto.
    Any ideas?

    Yes that worked. I also realised that I'd tried to scan as another user on the Mac, so I logged in as that user and got rid of the offending photo.
    So now I'm back in the original user and my Import folder is at the desktop and I can import new photos from my SD card...hooray! However when I try to move the import folder back to the iPhoto library I get the original error when trying to import new stuff. Am I stuck with my Import folder on the desktop? (Not a big deal if I am, just wondering)
    Thank you!

  • Something wiered is going on with my mac please read

    ok guys i have no clue but my mac was working perfectly but now this is the 3rd time that out of nowhere, my mac simply restarts, i dont get the kernel panic screen or anything , my mac just simply restarts, what is wrong with it? the only new thing i installed is that i updated itunes to itunes 7.5 and i belive thats when the problem started, just 2 minutes ago i pluged my iphone to the dock to charge it, itunes loaded up because it automaticlly does that when i plug in my iphone and ban my imac restarted, so i do belive its itunes, how can i uninstall itunes so that i can reinstall an older version of itunes which i had before ? i know where to get the old itunes version can u just tell me how to uninstall itunes please? i checked with disk utility, the disk returned no errors aswell as the permission check.

    Software conflicts should not cause a forced restart. Have you checked your power cord make sure it's plugged in securely both on the back of the iMac and at the wall socket? Shut down your computer before you check the power cord. If it passed the Disk Verification then that's not the problem and Disk Warrior will not fix it. Have you installed any third party RAM recently? You could try running Apple Hardware Test. Run the extended test.
    George

  • Something messy is going on with my finder...

    My finder is acting weird when I drag an application into it. I made a quick video for you so I don't have to explain it so here:
    http://youtube.com/watch?v=rQIW0y_-cfA
    any ideas would be much appreciated thanks a lot.

    DS_Store is a hidden file. Every folder has one. I do not know if Onyx deletes these. Here is there site to check for yourself:
    http://www.titanium.free.fr/pgs/english.html

  • I am going overseas with my iPod Mini

    Does anyone know if I need to buy a converter for this? I will need to charge it when I am there. Thanks!!!

    no you just need a plug adapter

  • Whats going on with the ipod nano not being supported by the xbox 360, the PS3 and other docks?

    Why can I not play music through any of these items?

    It wasn't designed to do it.

  • I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

    I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for