Something went terribly wrong
My mom bought a new silver i pod nano and synced it to the computer and all my songs went on it and she didnt want all my songs so someone tried to help her and now her ipod will only allow 30-40 songs and no more. and it only reads as having about 1.7 gb instead of 2 gb.
i have done everything i can think to do. restore through the computer, restore by menu and center button, everything. PLEASE HELP!!!!
ok, i realized that after i posted it. sorry. and i already did that a couple times and it just gives me a message that says that there isnt enough memory on the ipod for the amount of music in the library or something like that, although i know that that cant be possible cause i have a lot more on mine than there is in hers and our ipods are the same.
Similar Messages
-
I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?
I am having an issue as well, I think it is ongoing for everyone who is trying to update.
-
And then something went horribly wrong.
I left my iMac on before going to work yesterday and there was a power outage in my building. When I returned home for the day, after finding out about the power outage, I went to turn my iMac on. Everything seemed fine, I had sound and video. While it was in the loading screen, it restarted on its own. It did an endless cycle of loading and then restarting. I never got past the loading screen. I was about to see if I could just reformat the HDD by reinstalling the OS, but I already had a disk in the drive. Any ideas of why it would get stuck in that cycle of loading and restarting? I would take it to a mac genius, but I am currently stationed in Okinawa, Japan and there are no apple stores around.
I think you answer your own question about this by telling us that there is a disk stuck in the drive. Next time you start it up, hold down the mouse key: that should eject the disk. If you have a bluetooth mouse, it might be an idea to borrow a USB mouse from a friend: anything will do.
It may be premature to think about reformatting.
When the disk comes out, it is time for repairs. Start gently with a simple, Safe Boot: hold down the Shift Key at startup. That may make things a little more stable. If you have it, start up with the Install disk in the drive (slide the disk in then press the start button). As it starts, hold down the C key. Select the language, but do not install, look at the menubar and select Utilities. With Disk Utility, you can try First Aid and Repair the disk.
Let us know what happens. -
hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
Sorry, something went wrong - Open Office File from Search Results Page with Office Web Apps
Hi,
I'm getting "Sorry, something went wrong" error when I'm trying to open any office document from inside Search Results Page with Office Web Apps, the same error is appearing in the document preview as well.
The error in SharePoint logs says that the file cannot be found.
Please note that this error is coming only when the "Filename" of the document is not written in English (in my case its written with Arabic characters).
If I try to open it from the document library, its opening properly with no errors.
The only difference between two URLs (document URL in Search Results and in Document Library) is the value for "sourcedoc" attribute;
In the case of Search Results page, the filename in "sourcedoc" attribute is kept as is with Arabic characters.
While in the Document Library, the filename in "sourcedoc" attribute is converted into different characters (something like: "B9%D9%85%D9%8").
Anybody have an idea on how to overcome this issue, implement a workaround or modify the "sourcedoc" behavior?
Thanks in Advance.
Hamza AlSughierDear Wendy,
Thanks for your efforts, I already tried your last suggestion before, but this didn't solve my problem.
Actually my end users are accessing this portal using ADFS and HTTPS.
Finally I got this solved, I have done below to get my overall solution working perfectly:
- First I have configured Windows Authentication and ADFS Authentication on the same zone which is the default zone.
- The issue when opening office documents with Arabic file name has disappeared as a result of first change.
- Then I have faced an issue where we are not able to crawl content under Default zone, however we have to do so, after too many efforts, I found that its related to the Load-balancer/proxy, I have made the crawler server
to crawl himself (http://CrawlServerName:PortNumber).
- Also a change on Alternate Access Mapping was needed, I have set one of the extended zones (which is running Windows Authentication only) as Internal URL for the Default Zone, and this is was the URL I used for Crawling.
I have configured Server Name Mappings to make sure we got proper URLs in Search Results.
- Then we faced another issue, which is Authentication selection on login page (How to bypass this page, and authenticate using ADFS auto), I used this solution (Set Custom Sign In Page):
http://0ut0ftheb0x.wordpress.com/2014/01/04/skip-the-authentication-selection-page-at-_logindefault-aspx-in-a-mixed-authentication-environment/.
- I faced one more issue as a result of above workaround; Sign Out functionality wasn't working well; users get logged in automatically whenever I click on Sign Out. I solved this by modifying the "Sign Out" Control under _layouts;
I made it to redirect users to ADFS Sign Out Page instead of SharePoint Sign Out Page (I know its not recommended, but I don't have any other option).
Hamza AlSughier -
Creative Cloud Packager - "Oops Something went wrong ..." Service down?
I have been trying to use the Creative Cloud Packager application for two days to download and package an app. It is refursing to connect to Adobe and all I get is a criptic something went wrong try again later message.
I am an Enterprise customer and am using the most recent version of the packager available in my enterprise account download account.
Please let me know what other information I can provide.
Thank you.
- Lynna Jackson, Williams CollegeHi,
Download and Install Adobe Application Manager, launch it and let it update itself. Then you should be able to close Application Manager and open Creative Cloud Packager. That worked for me
--=Thanks!
--==Trey -
Sharepoint 2013 foundation central admin "something went wrong"
I recently installed SP1 (the bad version before it was pulled) on my SharePoint 2013 foundation server. I ran psconfig and made sure my databases were up to date after SP1. I checked central admin after psconfig and everything was working and good to
go. I have little need to access it on a regular basis, so after the install I haven't attempted to access central admin for approximately a month. As the updated SP1 just hit a few days ago I attempted to pop into CA to does some work on the site in preparation,
and I received the sorry something went wrong message. I thought it may be an issue due to the bad version of sp1 that was installed and/or high ram utilization. As this is a standalone box in production I could not reboot easily. I was finally able to do
the install last night, and it appears the problem is still ongoing. The site has been in production for about 6 months now, I have never had any issues hitting CA previously. SharePoint is running as a VM, and we have decked the specs out for it. We are allocating
4 cores and 24gb of ram to the site, and we are not seeing anything close to max resource utilization on the hypervisor or on SharePoint. I checked the correlation ID that SharePoint provides in the ULS logs and the only thing close to an error I get is a
message "cannot find site lookup info for request uri
http://localhost:<port binding>/." this is followed by "Application error when access /, Error=Exception of type 'System.ArgumentException' was thrown.". I'm exporting a copy of the vhd to experiment on in a test environment now, so
I will update this if I get more info. I don't think this was caused by SP1 as I was able to hit the CA page after doing the upgrade, but other than standard users interacting with the site since SP1, there have been no changes from an administration perspective.
I am the only one who touches the site here so I know changes weren't made without my knowledge. Anyone have a clue what could be causing this?I see, good to know. IT couldn't have been someone visiting the CA page turning it on, as its an IIS only setting. I cant say that no one ever would have changed the settings, but generally I am the administrator for this server and my colleagues don't touch
it.
When I say default content pages I mean my SharePoint site collection pages. The problem I was having when I started this thread was about CA, but I also noticed on my site collection that FBA is turned on as well. When I turn this off a few things
happen, generally I get a message around authorization saying that the site collection admin or farm admin cannot view the page. On the few occasions I am able to login, the page content often renders without any css, so its just plain text on the page, or
it places the text in random locations around the page. Generally when I try to navigate though I just get an access denied message shortly therafter. Keep in mind I have done absolutely no setup at all around FBA, so I'm not sure why turning off an authentication
method that has not been configured at all would not allow me to access my site pages. -
Workflows completes but goes to "Sorry something went wrong" page
SharePoint Version: 2013
Workflow Version: 2010
My Title: Junior SharePoint Administrator
I have been working weeks on a project to use workflows for a business process. It is as simple as setting variables and sending email to people.
I have successfully created a site workflow and published it. When I start the workflow, it starts fine but then show me this (very annoying and always unhelpful) error --> Sorry,
something went wrong. An unexpected error has occurred.
Funny thing, the workflow stills completes fine and I get the email notification I created in the workflow! No errors messages in the workflow history either - completely clean.
Is there any reason for this? I am concerned since it will be used by a large group of people monthly and this is a huge "NO" for UX experience and usability...
I have tried linking the Correlation ID to anything and looking through server logs. I have got nothing.
Help please? :)get the time that the error occurs, and recheck the log file that during this time, whether there is related information.
what's your workflow do? what's the result by using other user account to start the workflow.
Qiao Wei <br/> My blog:<a href="http://blog.goobol.com">http://blog.goobol.com</a> -
Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.
If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
NOTE:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download -
Office 2013 - Something went wrong (no kidding)
New x64 machine running Office Home & Business 2013 x86 OEM.
Originally, everything was running fine. Installed fine, set up fine, and ran fine. Inexplicibally, user calls stating when running ANY office app, it states "Something went wrong" and would not open (computer was only a few days old, no other
mods/installations).
Tried:
Online Quick Repair (same error)
Online Full Repar (same error)
Removal of product via KB2739501 (removed fine, now won't install)
Now product is removed. Ran FixIt KB2739501 twice and even removed Office folders in programs dir. When attempting to run ClickToRun installer, i get "Something went wrong". Really?
Tried x86 and x64 ClickToRun, no dice. Currently downloading the insanely massive offiline installer (because for some reason MS bundled x86 and x64 together... totally bright), but don't have any faith. User has been without Office apps for days. Scouring
net notes MS has a recognized issue with the installer process and licensing, but various fixes that worked for others, doesn't work here.
Any thoughts?
Thanks,
JeremyHi,
The first step I suggest is to start Office Apps in Safe Mode, check if the crash will happen.
Let's take Outlook for example:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
If the issue persists in Safe Mode, please go to the Event Viewer, you may find out more information about why the Office apps crashed.
Press Win + R and type "eventvwr" in the blank box, then press Enter.
You may learn from http://www.msoutlook.info/question/317
If now you can't install Office properly, please refer to the KB below:
Office 2013 or Office 365 installation error "Something went wrong"
http://support.microsoft.com/kb/2827031/en-us
Try Fix it in the kb to try again.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I have an custom approval workflow and when I try to edit an assigned approval Task it throws me an error
Sorry, something went wrong
Web must contain a discussion list
Any help appreciated!
PravsHi,
For a better troubleshooting, I suggest you do as the followings:
1. Check the ULS log for more detailed error message, for SharePoint 2013, the ULS log is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can use ULS Log Viewer to check the information in the log.
2. You can use fiddler to track if there is something wrong in the workflow request.
Here are some detailed articles about debugging workflow:
https://msdn.microsoft.com/en-us/library/office/dn508412.aspx
https://sharepointlogviewer.codeplex.com/
Thanks
Best Regards
Jerry Guo
TechNet Community Support -
Sorry something went wrong. Please try again. Power BI Scheduled Data Refresh
My Power Pivot Connection can be refreshed locally from Excel workbook. However I receive the following error when attempting a data refresh from the Power BI site:
Sorry, something went wrong. Please try again. Correlation ID: 70aad105-6563-42de-9c27-272ecfa082ee start date 2/24/15 at 11:38 AM
Hi Ryan,
Will you please check the following:
1. are you refreshing the data from within Excel online?
2. If yes, does your workbook connect to on premises data source?
if yes, then refresh of on premises data sources from within Excel online is not supported. Schedule refresh is the only supported means to refresh workbooks connecting to on premises data sources or using Power Query.
If this does not answer your question. Please mention the steps you followed & attach an image of the error you see.
-mini -
"Oops, something went wrong." error message when t...
Since I was forced onto the new version of Skype due to the deprecation of historical versions I have been unable record a video message. Whilst I am able to participate in video calls with no hitches at all, attempting to record a video message instantly gives me the following error message:
"Oops, something went wrong.
Please try again, or get in touch if you need help."
Unfortunately, Microsoft struggle to implement error codes in their software, I can only assume this is because consumers find technical looking numbers terrifying, so I have absolutely no idea what the problem is - it could be a near infinite number of things.
I have done a full reinstallation of Skype, multiple times, including deleting all registries that are associated with Skype (as suggested in the Skype support site), clearing any obvious user caches that exist, and so on. Still, the problem persists. Not a single video source available on my computer allows the recording of a video message, so I do not believe this is a problem with my webcam or driver.
Running Windows 7 Home Premium 64-bit, Skype 6.18.0.106.
I would appreciate any suggestions to solve this frustrating problem. Thank you.
- BanTheCatEmojiPlease, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here. -
While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.
Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here
Maybe you are looking for
-
Is this really not possible using standard Labview/Vision YI`s?
-
I've just switched to a HDV work flow from SD, now I can't get motion to do a ram preview of all my frames and when I try to play back it's like playing a 10fps that why I trying to make the ram preview. I have like 2000f and it will only render mayb
-
hi, please explain accruals/deferrals guna
-
How to maintain cluisterview for new business roles in SAP CRM2007
How to maintain cluisterview for new business roles in SAP CRM2007. Table - CRMV_UI_NB Regards, Biplab
-
Duplicate Podcasts and iTunes U Podcasts
Does anyone know how I can search for and delete duplicate podcasts? the File>Display Duplicates option only seems to be available for Music files. Gerry