Something went wrong . . . Help?

I bought the Emery cd The Weak's End from itunes and for some reason when I started listening to it for the first time a weird fuzzy noise was in the background. Thinking it was my speakers I listened to another song from another cd and it worked fine. So I then I went to see if that was just some thing the band had added for effect (this has happened before and I later found out that it was suppose to be like that on the cd). I checked and the cd elsewhere sounded fine. What can I do did I just waste 10 bucks on a broken file of music. The whole cd seems to have the problem. Help!
Please and Thanks,
KMNOP

Contact the iTunes Music Store customer support department through the form at the bottom of this web page and explain the problem to them. The record company may have done a bad job of compression, or there may have been a problem with the download.

Similar Messages

Help, I can't sign in to Visual Studio Community 2013 "Something went wrong and we can't sign you in right now. Please try again later."

Hi, can anyone help me further diagnose?
On Windows 7 64-bit, whenever I try to sign into Visual Studio Community 2013 I get a bunch of clicking sounds, and then "Something went wrong and we can't sign you in right now. Please try again later."
I installed the 2013 update 4 just recently (3/23)
I was getting this error back in February

Hi HuggyPaul,
Thank you for posting in MSND forum.
>>whenever I try to sign into Visual Studio Community 2013 I get a bunch of clicking sounds, and then "Something went wrong and we can't sign you in right now. Please try again later."
Based on your issue, I suggest you could try to use an another microsoft live-in user account to sign in the Visual Studio Community 2013 to check if you can sign in the VS2013 Community with update 4.
Or you could try to use same user account to sing same version of VS2013 Communty with Update 4 on other machien and the check if you can sign in this VS 2013 Community with update 4.
(1)If you could sign in the VS2013 Community update4 by the another user account on your machien, I think that the issue maybe related to your user account.
(2)If you still could not sign in VS 2013 Community update 4, maybe you will need to repair or re-install this VS2013 Community with update 4.
In addition, please tell me what browser you use on your machine.
If your machien just insatall other browser such as chrome, please try to install the IE and then check this issue again.
From this error message, i find a similar thread about your issue, maybe it can help you.
Referenece:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/49a611c6-cf70-4756-932c-1e26edddd9a1/something-went-wrong-and-we-cant-sign-you-in-right-now?forum=reportabug
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached. This is making it nearly impossible to use the phone - please help! So far,

I keep getting the "Something went wrong" message on my Droid Razr HD also. I looked in my Settings, and I don't have a Cloud app - I have a Cloud Print app with nothing cached. This is making it nearly impossible to use the phone - please help! So far, this website has only made things more difficult.

The details you're providing are very helpful, Maj_Dad. With airplane mode enabled,
there would be no message because that disables celluar data. I would recommend
tying that mode with WiFi to see if it still happens. It sounds like this issue
has something to do with one of the applications on the device.
JoeL_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Some Yahoo pages do not load. Error msg says "oops something went wrong. Help

I have the latest version of Firefox. My isp uses Yahoo.com for it's home page. For the past few weeks, whenever I try to read a news or sports article, I get a message that says "oops, something went wrong". I tried reloading several times but no help. Same thing happens on another computer which has a different board and cpu. Both systems are Win XP Pro. This problem started before the windows cutoff date. Rebooting the machine doesn't help either. Any suggestions?

It sounds like the web site has a problem. Not you. Try going to other web sites
and see if there are any problems with them. 
Many site issues can be caused by corrupt cookies or cache. 
Clear the Cache 
'''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
 and 
Remove Cookies '''''Firefox/Tools > Options > Privacy.''''' 
Under '''History''', select Firefox will '''Use Custom Settings'''. 
There is a button on the right side called '''Show Cookies'''. 
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
 While you are in safe mode; 
'''''Firefox Options > Advanced > General'''''. 
Look for and turn off '''Use Hardware Acceleration'''. 
Poke around safe web sites and see if there is still a problem. Then restart.

HT4623 I was updating my Ipad and something went wrong. on my screen I have the round blue circle with the word itunes under it and it also has a plug that looks like it is to be plug into a computer can you help me please

can some one help me I was up dating my Ipad and something went wrong. I am on my computer now.

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

I have a feeling this has been up here a lot. I updated ios 6 to my phone with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

I have a feeling this has been up here a lot. I updated ios 6 to my phone (4S) with no problems but I also back my phone up. I decided to help the wife out and update hers and something went wrong data lost. All contacts, photos, etc without backup, help.

if you have no back up in icloud or itunes the best you can do is sync with your computer and get back what you can from there

HT4623 By updating to IOS 6.1 something went wrong. The rsult is that I have picture of USB cable and Itunes on my Iphone and the PC does not recognize it. What can I do ? Please Help. My Iphone is dead !

By updating to IOS 6.1 something went wrong. The rsult is that I have picture of USB cable and Itunes on my Iphone and the PC does not recognize it. What can I do ? Pøease Help. My Iphone is dead !

you may have to do this a couple of times http://support.apple.com/kb/HT1808

Restore iphone 4 to install the ios 5 but something went wrong while doing back up and whenever i connect the phone to itunes theres an error and the phone turn off after 1min

hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even

by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

Workflows completes but goes to "Sorry something went wrong" page

SharePoint Version: 2013
Workflow Version: 2010
My Title: Junior SharePoint Administrator
I have been working weeks on a project to use workflows for a business process. It is as simple as setting variables and sending email to people.
I have successfully created a site workflow and published it. When I start the workflow, it starts fine but then show me this (very annoying and always unhelpful) error --> Sorry,
something went wrong. An unexpected error has occurred.
Funny thing, the workflow stills completes fine and I get the email notification I created in the workflow! No errors messages in the workflow history either - completely clean.
Is there any reason for this? I am concerned since it will be used by a large group of people monthly and this is a huge "NO" for UX experience and usability...
I have tried linking the Correlation ID to anything and looking through server logs. I have got nothing.
Help please? :)

get the time that the error occurs, and recheck the log file that during this time, whether there is related information.
what's your workflow do? what's the result by using other user account to start the workflow.
Qiao Wei My blog:<a href="http://blog.goobol.com">http://blog.goobol.com</a>

Office 2013 - Something went wrong (no kidding)

New x64 machine running Office Home & Business 2013 x86 OEM.
Originally, everything was running fine. Installed fine, set up fine, and ran fine. Inexplicibally, user calls stating when running ANY office app, it states "Something went wrong" and would not open (computer was only a few days old, no other
mods/installations).
Tried:
Online Quick Repair (same error)
Online Full Repar (same error)
Removal of product via KB2739501 (removed fine, now won't install)
Now product is removed. Ran FixIt KB2739501 twice and even removed Office folders in programs dir. When attempting to run ClickToRun installer, i get "Something went wrong". Really?
Tried x86 and x64 ClickToRun, no dice. Currently downloading the insanely massive offiline installer (because for some reason MS bundled x86 and x64 together... totally bright), but don't have any faith. User has been without Office apps for days. Scouring
net notes MS has a recognized issue with the installer process and licensing, but various fixes that worked for others, doesn't work here.
Any thoughts?
Thanks,
Jeremy

Hi,
The first step I suggest is to start Office Apps in Safe Mode, check if the crash will happen.
Let's take Outlook for example:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
If the issue persists in Safe Mode, please go to the Event Viewer, you may find out more information about why the Office apps crashed.
Press Win + R and type "eventvwr" in the blank box, then press Enter.
You may learn from http://www.msoutlook.info/question/317
If now you can't install Office properly, please refer to the KB below:
Office 2013 or Office 365 installation error "Something went wrong"
http://support.microsoft.com/kb/2827031/en-us
Try Fix it in the kb to try again.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while editing Workflow Task List Item - "Sorry, something went wrong.. Web must contain a discussion list

I have an custom approval workflow and when I try to edit an assigned approval Task it throws me an error
Sorry, something went wrong
Web must contain a discussion list
Any help appreciated!
Pravs

Hi,
For a better troubleshooting, I suggest you do as the followings:
1. Check the ULS log for more detailed error message, for SharePoint 2013, the ULS log is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can use ULS Log Viewer to check the information in the log.
2. You can use fiddler to track if there is something wrong in the workflow request.
Here are some detailed articles about debugging workflow:
https://msdn.microsoft.com/en-us/library/office/dn508412.aspx
https://sharepointlogviewer.codeplex.com/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

"Oops, something went wrong." error message when t...

Since I was forced onto the new version of Skype due to the deprecation of historical versions I have been unable record a video message. Whilst I am able to participate in video calls with no hitches at all, attempting to record a video message instantly gives me the following error message:
"Oops, something went wrong.
Please try again, or get in touch if you need help."
Unfortunately, Microsoft struggle to implement error codes in their software, I can only assume this is because consumers find technical looking numbers terrifying, so I have absolutely no idea what the problem is - it could be a near infinite number of things.
I have done a full reinstallation of Skype, multiple times, including deleting all registries that are associated with Skype (as suggested in the Skype support site), clearing any obvious user caches that exist, and so on. Still, the problem persists. Not a single video source available on my computer allows the recording of a video message, so I do not believe this is a problem with my webcam or driver.
Running Windows 7 Home Premium 64-bit, Skype 6.18.0.106.
I would appreciate any suggestions to solve this frustrating problem. Thank you.
- BanTheCatEmoji

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

HT1267 While upgrading my iPhone 3 to 4.2 something went wrong and would not start at all. When tried to restore after going through th process it comes up with the message "The iPhone could not be restored. An unknown error occurred [1015]." What can I d

While upgrading my iPhone 3GS to iOS 4.2 something went wrong and came up with the message "The iPhone could not be restored. An unknown error occurred [1015]." Now it will not start at all. It just stays on screen with USB and the iTune picture. What can I do to get it going again. I only tried to upgrade because I was prompted to up-grade and now I am helpless. I did a backup before starting the upgrade. The error message did not tell what to do next. Any help is very much appreciated.

Usually that means the iPhone was hacked to unlock it from the original
carrier .
Updating the operating system locks it back to that original carrier
You could try this
http://support.apple.com/kb/TS3281
However if the iPhone was hacked it is probably a paper weight now
and as this is an Apple hosted forum you can get no further help here

When I try to execute any workflow I get the error "Something went wrong.."

Hello,
Last weekend I updated the servers farm and I executed "SharePoint 2013 products configuration wizard" But I had an error and the wizard showed this: Conpleted configuration settings will not be rolled back.
From this moment when I try to execute any workflow in one of my site collections I always get the error "something went wrong.." Then I was checking the logs and I saw this:
04/08/2015 08:12:18.82 w3wp.exe (0x1318) 0x2070 SharePoint Foundation
General 8nca Medium Application error when access /_layouts/15/IniWrkflIP.aspx, Error=Requested
registry access is not allowed. at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable) at Microsoft.Win32.Registry.GetValue(String keyName, String valueName, Object defaultValue)
at Microsoft.Office.InfoPath.Server.Util.UrlManager.<>c__DisplayClass1.<OpenFileNameMap>b__0() at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.Office.InfoPath.Server.Util.UrlManager.OpenFileNameMap()
at Microsoft.Office.InfoPath.Server.Util.UrlManager..cctor() 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82 w3wp.exe (0x1318) 0x2070 SharePoint Foundation
Runtime 6616 Critical Requested registry access is not allowed. 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82 w3wp.exe (0x1318) 0x2070 SharePoint Foundation
General ajlz0 High Getting Error Message for Exception System.TypeInitializationException:
The type initializer for 'Microsoft.Office.InfoPath.Server.Util.UrlManager' threw an exception. ---> System.Security.SecurityException: Requested registry access is not allowed. at Microsoft.Win32.RegistryKey.OpenSubKey(String name,
Boolean writable) at Microsoft.Win32.Registry.GetValue(String keyName, String valueName, Object defaultValue) at Microsoft.Office.InfoPath.Server.Util.UrlManager.<>c__DisplayClass1.<OpenFileNameMap>b__0()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.Office.InfoPath.Server.Util.UrlManager.OpenFileNameMap() at Microsoft.Office.InfoPath.Server.Util.UrlManager..cctor()
--- End of inner exception stack tra... 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82* w3wp.exe (0x1318) 0x2070 SharePoint Foundation
General ajlz0 High ...ce --- at Microsoft.Office.InfoPath.Server.Util.UrlManager.GetConverterGeneratedFilePath(ConverterGeneratedFile
file, Document document) at Microsoft.Office.InfoPath.Server.SolutionLifetime.ScriptIncludes.RenderCssLinksToHeader(Control ctrl, Document document, Boolean ribbonEnabled, Boolean isDisplayMode) at Microsoft.Office.InfoPath.Server.Controls.XmlFormView.TryToAddCssLinksToHeader()
at Microsoft.Office.InfoPath.Server.Controls.XmlFormView.OnDataBindHelper() at Microsoft.Office.InfoPath.Server.Controls.XmlFormView.OnDataBinding(EventArgs e) at System.Web.UI.WebControls.WebParts.Part.DataBind()
at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at Sy... 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82* w3wp.exe (0x1318) 0x2070 SharePoint Foundation
General ajlz0 High ...stem.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean
raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren()
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at Microsoft.Office.Workflow.IniWrkflIPPage.LoadFromWorkflowAssociation() at Microsoft.Office.Workflow.IniWrkflIPPage.OnLoad(EventArgs ea)
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean inc... 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82* w3wp.exe (0x1318) 0x2070 SharePoint Foundation
General ajlz0 High ...ludeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
But I cannot find any solution.
Please Help!

Hello,
After some troubleshooting finally I opened a case to Microsoft, finally we solved the error:
I cleared the configuration cache:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
With this I could execute the wizard without any problem and the problem was solved.
But if with this the problem is not fix, Apart from that, you can check this:
Apparently, Microsoft change the number version of the SP1, then if you have the first sp1 versión, you will have problems with the wizard because is looking for the newer version.
The first SP1 number version was:
15.0.4569.1506
The currently SP1 version is:
15.0.4571.1502
You can check your versión with this script:
http://blogs.technet.com/b/stefan_gossner/archive/2015/04/20/powershell-script-to-display-version-info-for-sharepoint-product-and-language-packs.aspx
Finally if you have the first version the solution is download SP1 again (newer) and install it again (it is not necessary unistall the currently SP1) When you finish, try to execute wizard again and everything will work fine.
Hope this helps!

Server 4.1 Profile Manager - Something Went Wrong

Hi,
I just updated my Mac Mini Server from 10.10.2 to 10.10.3, updating to Server 4.1.
It seemed to go okay, but now Profile Manager is messed up. When users try to log in, they get the message:
We're sorry, but something went wrong.
We've been notified about this issue and we'll take a look at it shortly.
(If you're the administrator of this website, then please read the log file "profilemanager.log" to find out what went wrong.)
When I look through the logs I find this:
[2015/04/09 23:15:47.194] F: ActiveRecord::StatementInvalid (PG::Error: ERROR: relation "view_all_user_groups_users_flat" does not exist
[2015/04/09 23:15:47.195] I: Rendering /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/public /500.html (500 Internal Server Error)
Any suggestions?
Thanks!
Frederick

mscott_mdm wrote:
Frederick,
Can you look at the /Library/Logs/ProfileManager/migration_tool.log file and paste in the last 50 or so lines?
Thanks for the help!
Here is the entire migration_tool.log file from updating:
[20723] [2015/04/09 17:13:17.136] -[SULogFileCollection setGlobalLogLevelPrefix:]: YES
0:: [20723] [2015/04/09 17:13:17.138]
 migration_tool-886.204 (PID:20723, OS:14D131, SERVER:14S1092, ARCH:x86_64) starting
 LA: migration_tool
0:: [20723] [2015/04/09 17:13:17.203] Waiting for postgres to startup....
0:: [20723] [2015/04/09 17:13:17.624] +[PGConnection reloadPreferences]: DBDebug = NO, DBLogNotices = NO, DBLogSQL = NO, DBMonitor = NO
0:: [20723] [2015/04/09 17:13:19.409] +[PGConnection reloadPreferences]: DBDebug = NO, DBLogNotices = NO, DBLogSQL = NO, DBMonitor = NO
0:: [20723] [2015/04/09 17:13:20.476] Dropping views...
0:: [20723] [2015/04/09 17:13:21.427] Dropping trigger functions...
0:: [20723] [2015/04/09 17:13:22.172] Dropping remaining non-dependent functions...
0:: [20723] [2015/04/09 17:13:23.810] MIGRATE_00885.001 completed successfully
0:: [20723] [2015/04/09 17:13:23.949] MIGRATE_00885.003 completed successfully
0:: [20723] [2015/04/09 17:13:24.566] EXCEPTION: Postgres <-[PGConnection executeCSQL:] (/SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-886.204/Compiled/Fr amework-Models/Postgres/PGConnection.m:339): "Postgres error 2BP01 (ERROR: cannot drop function dm_current_timestamp() because other objects depend on it
 DETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()
 HINT: Use DROP ... CASCADE to drop the dependent objects too.
 )">
 USERINFO: {
 SQLSTATE = 2BP01;
 errorMessage = "ERROR: cannot drop function dm_current_timestamp() because other objects depend on it\nDETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()\nHINT: Use DROP ... CASCADE to drop the dependent objects too.\n";
0:: [20723] [2015/04/09 17:13:24.566] SQL Module failed at statement:
 DROP FUNCTION dm_current_timestamp();
 -[PGConnection executeCSQL:] (/SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-886.204/Compiled/Fr amework-Models/Postgres/PGConnection.m:339): "Postgres error 2BP01 (ERROR: cannot drop function dm_current_timestamp() because other objects depend on it
 DETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()
 HINT: Use DROP ... CASCADE to drop the dependent objects too.
0:: [20723] [2015/04/09 17:13:24.567] Caught unhandled exception -[PGConnection executeCSQL:] (/SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-886.204/Compiled/Fr amework-Models/Postgres/PGConnection.m:339): "Postgres error 2BP01 (ERROR: cannot drop function dm_current_timestamp() because other objects depend on it
 DETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()
 HINT: Use DROP ... CASCADE to drop the dependent objects too.
0:: [20723] [2015/04/09 17:13:24.567] Migration failed at MIGRATE_00885.004 (final step is MIGRATE_00886.204)
0:: [20723] [2015/04/09 17:13:24.764] +[PGConnection reloadPreferences]: DBDebug = NO, DBLogNotices = NO, DBLogSQL = NO, DBMonitor = NO
0:: [20723] [2015/04/09 17:13:24.769] ShutdownMigrator: 2015-04-10 00:13:24 +0000
0:: [20723] [2015/04/09 17:13:24.770] BYE
[22210] [2015/04/09 22:45:34.642] -[SULogFileCollection setGlobalLogLevelPrefix:]: YES
0:: [22210] [2015/04/09 22:45:34.657]
 migration_tool-886.204 (PID:22210, OS:14D131, SERVER:14S1092, ARCH:x86_64) starting
 LA: migration_tool
0:: [22210] [2015/04/09 22:45:34.799] +[PGConnection reloadPreferences]: DBDebug = NO, DBLogNotices = NO, DBLogSQL = NO, DBMonitor = NO
0:: [22210] [2015/04/09 22:45:35.010] +[PGConnection reloadPreferences]: DBDebug = NO, DBLogNotices = NO, DBLogSQL = NO, DBMonitor = NO
0:: [22210] [2015/04/09 22:45:35.637] Dropping views...
0:: [22210] [2015/04/09 22:45:35.638] Dropping trigger functions...
0:: [22210] [2015/04/09 22:45:35.683] Dropping remaining non-dependent functions...
0:: [22210] [2015/04/09 22:45:36.515] EXCEPTION: Postgres <-[PGConnection executeCSQL:] (/SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-886.204/Compiled/Fr amework-Models/Postgres/PGConnection.m:339): "Postgres error 2BP01 (ERROR: cannot drop function dm_current_timestamp() because other objects depend on it
 DETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()
 HINT: Use DROP ... CASCADE to drop the dependent objects too.
 )">
 USERINFO: {
 SQLSTATE = 2BP01;
 errorMessage = "ERROR: cannot drop function dm_current_timestamp() because other objects depend on it\nDETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()\nHINT: Use DROP ... CASCADE to drop the dependent objects too.\n";
0:: [22210] [2015/04/09 22:45:36.548] SQL Module failed at statement:
 DROP FUNCTION dm_current_timestamp();
 -[PGConnection executeCSQL:] (/SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-886.204/Compiled/Fr amework-Models/Postgres/PGConnection.m:339): "Postgres error 2BP01 (ERROR: cannot drop function dm_current_timestamp() because other objects depend on it
 DETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()
 HINT: Use DROP ... CASCADE to drop the dependent objects too.
0:: [22210] [2015/04/09 22:45:36.548] Caught unhandled exception -[PGConnection executeCSQL:] (/SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-886.204/Compiled/Fr amework-Models/Postgres/PGConnection.m:339): "Postgres error 2BP01 (ERROR: cannot drop function dm_current_timestamp() because other objects depend on it
 DETAIL: default for table devices column last_update_info_time depends on function dm_current_timestamp()
 HINT: Use DROP ... CASCADE to drop the dependent objects too.
0:: [22210] [2015/04/09 22:45:36.548] Migration failed at MIGRATE_00885.004 (final step is MIGRATE_00886.204)
0:: [22210] [2015/04/09 22:45:36.842] +[PGConnection reloadPreferences]: DBDebug = NO, DBLogNotices = NO, DBLogSQL = NO, DBMonitor = NO
0:: [22210] [2015/04/09 22:45:36.847] ShutdownMigrator: 2015-04-10 05:45:36 +0000
0:: [22210] [2015/04/09 22:45:36.848] BYE

Something went wrong . . . Help?

Similar Messages

Maybe you are looking for