Something wrong after bios update

hi lenovo communityi have lenovo g580 cori7 1 tb hdafter update bios when i reboot the labtop theres no sign that appeared to guide for examplef12 = setup or f2=bios so what to do to make these apeard againregards

Hi ironman9,
Welcome to Lenovo Community Forums!
If you can still enter the F2 for BIOS or F12 for the boot menu, It means that the options are still active and I think this is not a cause for Concern.
I have checked most of the G580 online and all are not showing these message/prompt anymore.
Check here
I think this is how the recent BIOS is configured.
I tried Checking the BIOS of the G580 and I see no settings to enable this back.
Just make sure that the Options are still responsive,
Turn OFF your computer and Turn it Back ON and start tapping F2 or F12.
Regards
Solid Cruver

Similar Messages

After BIOS update Equium A100-147 wont boot

Can anyone help me please?
Updated my BIOS as recommended using the windows tool! All went through fine, backed up, verified and flashed new version. After the auto reboot my laptop will not boot past the Toshiba screen, press F12 and nothing, F2 and I just get PLEASE WAIT. Guess I won't be trying Visa or indeed any OS now.
Why oh why did I do it? All was fine before but was advised to do it for full compatibility. Do I need a new board or is there a key I can press to unable me to boot from CD to reflash or return to old BIOS?
Please help!

I always say: do not touch well running system!!!
Anyway in your case something goes wrong with BIOS update and you must visit authorized service in your country. They can help you. Sorry but there is nothing you can do alone. BIOS functionality is very sensible case and if BIOS chip is defective now you can not do anything to make it work again.
Sorry. :(

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite L650-1KR PSK1JE - dead after BIOS update

As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
Of course my warranty is already over... :-(
Please help!
Thank you in advance...
lichtimc

Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again

Hello there..
Please help me to overcome this issue.
I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
Please help me someone.

Hi dhaval2000in,
Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
Im sure you can clarify this problem with the technicians and then you can use your notebook again :)

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

My Qosmio F10 is dead after Bios Update

My Qosmio F10 is dead after BIOS update ... it doesn't work anymore .. i update the bios from 1.10 to 1.20
the switch Led is always orange...
what can i do to make it work again ? or return the 1.10 version?

Hi
You can check many postings in this forum about the BIOS upgrade procedure.
Mostly the users damage the notebook because of wrong BIOS or wrong BIOS procedure.
If the notebook is dead after this procedure so it could be a damage motherboard.
In this case only the Toshiba service partner can solve this issue. ;(

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Something wrong after bios update

Similar Messages

Maybe you are looking for