Sometimes a pin wheel pops up on screen (mac book pro) and I can't do anything. Why does this happen?
Sometimes a pin wheel pops up on screen and it freezes. Why does this happen?
"the spinning wait cursor is displayed automatically by the window server when an application cannot handle all of the events it receives. If an application does not respond for about 2 to 4 seconds, the spinning wait cursor appears."
Read more here: http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html
Similar Messages
-
4 or 5 browser windows open at the same time. Tabs are down in the control bar. every now and then they just combine into one pop up. can't undo and very annoying. Have to close all out and start over.
This can happen if you drag a tab slightly down in the browser window while clicking.
Firefox has a feature called tear-off tabs
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.
You can also do this via the right-click context menu of a tab: Move to New Window
You can drag that tab back to the tab bar in the original window to undo that detaching.
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t -
How can I stop pop ups on my mac book pro and i pad
How can I stop pop ups on my mac book pro and my new ipad 4H.
For MacBook Pro:
http://support.apple.com/kb/ph11946
http://browsers.about.com/od/safar1/ss/How-To-Enable-The-Pop-Up-Blocker-In-Safar i.htm
http://www.lbl.gov/ehs/training/webcourses/globalAssets/CourseRequirements/disab lePopups/disablepopups.html
For Ipad 4H:
http://browsers.about.com/od/safar1/ss/How-To-Enable-The-Pop-Up-Blocker-In-Safar i_8.htm
hope it helps -
Using Firefox 4:
I right-click on a tab to "pin as app tab."
The new app tab appears as expected.
But after I close and then reopen Firefox 4, my app tab(s) no longer appear. They go away. Repeated cycles of the above do not keep the app tabs present .
Advise on this would be appreciated.
Thank you.I have been having this problem on occasion for a while. (Most recently in firefox 7) I just discovered that I had a phantom firefox.exe process running for some reason. This has the same effect as closing your tabbed window before a non tabbed window. I killed the process and my app tabs magically work again.
-
i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao. -
I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.
Hello twrate,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iMovie '11: If iMovie doesn’t recognize your camcorder
http://support.apple.com/kb/PH2146
Best of luck,
Mario -
I sometimes get e-mails with pdf attachments. However instead of opening a PDF icon the body of the e-mail message has the PDF's already opened. Why does this happen? Is there anything I can change on my mac book pro to make these PDF's come thru with their individual icons which can then be opened.
This is a long-standing design flaw in Apple Mail.
Prior to Mavericks, this command in Terminal would stop the annoying behavior:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
This Terminal command stopped working in Mail 7.1 under Mavericks. I have reported this to Apple as both a feature request and a bug. You should too.
http://www.apple.com/feeback -
I just booted my mac book pro and it is at a blue screen with a flashing folder with a question mark in the middle of it. How do I get out of it?
Click here and follow the instructions. If the computer was running Mac OS X 10.6.8 or earlier and you reach the third set of steps, insert a Mac OS X install disk.
(126818) -
I start my mac book pro and the screen goes white with an apple in the middle
I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off againReinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I dropped my mac book pro and the screen has now got a black rectangle and pink and green lines down it. What is it and how do i fix it?
Sounds like the display got damaged. Connect an external display and see if that's OK. If that's OK then the display is probably damaged. You can try reseating the LVDS connector but if that doesn't help the connections on the display body are very difficult to get to. Apple would just replace the entire display and that's what I would do as well.
-
Can yo play 18 wheels of steel on a mac book pro?
My Daughter has a mac book pro, and wants to play 18 wheels of steel, i think its not possible or compatible with the software, need help?
IIRC 18Tons of Steel is a WIndows game, so you have to install and run Windows on your Mac.
You can use Apples BootCamp to install Windows and to play Windows games.
http://www.apple.com/support/bootcamp/
The virtualization apps there are for Mac OSX (Parallels; VMWare Fusion and VirtualBox) are not that suitable for playing Windows games but might work with 18Tons.
And you have to have a Windows License (Windows 7).
Stefan -
my iphone 4 screen turns into blue, and i can't do anything because my power button is broken. How to fix my iphone back? Please help me
I am having the SAME exact problem! Except instead of lock button broken it's my home button so I can't do the whole "put in recovery mode" deal. My screen only says "tap the home button 3 times" and it has my screen locked until I hit the home button but since it is broken I can't get in my phone at all. I have all of my work info in my phone so I'm screwed and can't get any help. PLEASE let me know if you find a way around this...!!!
Thanks! -
I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?
Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(109318) -
I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?
Yes your 2010 supports Target Display Mode using MiniDisplay Port input.
check out FAQ #4 > Target Display Mode: Frequently Asked Questions (FAQ)
Maybe you are looking for
-
Data in the structure clearing when chicking custom tab in screen exit
Hi All, I am working in screen enhancement for WZR1(payment document).Here in header details the custom screen will appear under additional fields tab. I have appended the custom fields in structure KOMLFK and table WBRK.here when i debug the scre
-
FMN0 - Reconstruction of FI Doc in FM with wrong figures
HI Sir, I reconstructed one FI - HR document from FMN0 with SAR as document currency where following are the system settings. We don't have PBET. Company Code Currency: USD FM Area Currency - EUR Controlling Area - EUR The FMN0 ran with the following
-
Hi all, Any bapi FMs available for Goods receipt and Goods Issue? Thanks in advance.
-
Hi; I have this ugly code: var i:Number = new Number(0); while (i > 6) switch (i) case (0): container = container0; break; case (1
-
Pull image from library with AS3?
Hello, I'm a fairly experienced AS2 programmer transitioning in progress to AS3 programmer. I'm using Flash CS4 as my IDE with Actionscript 3 and Flash Player 10. I'm working on a bigger project but the area I'm struggling in is dynamically pulling a