Sometimes I take a photo on 4S and it comes out white with no picture.

Sometimes I take a photo from my 4S and even with removing the cover, the photo still appears blank - a white screen.
Anyone can advise why this is happening?

Hello rebeccay1,
Thanks for using Apple Support Communities.
It's hard to say exactly what is causing the issue without doing any troubleshooting. The article below has great troubleshooting steps to go through in order to resolve this issue.
Camera
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Take care,
Alex H.

Similar Messages

Final Cut Studio 3 installed - and in FCP and Motion, video comes out white

My system meets all the requirements, I've got QT 7.6.4 (and it is pro registered). I did a fresh install of FCS3. When I load anything into an FCP project, the audio plays but video just comes out white (with the exception of an mpg I tried bringing in that did show properly). Also, in Motion, when I load a template, it shows drop zones but all of the graphics are not visible, even when going into "layers".

The video is QT clips and FCP movie (QT exports) from previous work in older versions. It does play fine in QT, so that's not the problem. I also checked and indeed RGB is selected, so it's no an alpha problem.
When I import an mpg, it shows fine in the Viewer. When I import a jpg picture into a new project, it shows as a multicoloured rough image. Video clips just show as white. If I drag that jpg down to the timeline, it shows as White in the Canvas.

HT4972 When I take photos of myself, the image come out backwards. I have an iPad2 and an iPad 3, and both of them do the same with my self portraits. Any ideas on how to remedy this?

When I take photos of myself, the image come out backwards. I have an iPad2 and an iPad 3, and both of them do the same with my self portraits. Any ideas on how to fix this. I use wifi.

Gmabert-
The front camera displays a reversed image on the screen, as if you were looking into a mirror. When you take a picture, it comes out normal, which is backwards to what you would have observed on the screen.
Fred

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format. Siebel wants to send the data as xml to BI but not sure of the BI capabilities on giving WSDL embedded with XSD (input is a hierarchical)

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

How come when I try to look at my photos in Iphoto a triangle comes out with an exclamation mark and I cannot see my photo?

How come when I try to look at my photos in iphoto a triangle comes out with an exclamation mark? Does this mean that I have lost all of my photos? Is there any way to fix this?
Thanks to all...

It means that iPhoto has broken the link/file path to the original file.
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Hey every one ,i bought a new ipad 2 last month,i am not using it so much but sometimes it does respond,hang's up,all games and app come out of there folder . can you plz help me

hey every one ,i bought a new ipad 2 last month,i am not using it so much but sometimes it does respond,hang's up,all games and app come out of there folder . can you plz help me.my email id is [email protected]

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
Don't leave your email address on a public forum

My brother dropped my iphone 6 on tile and its cracked and the screen is white with different colored lines down it. What do you suggest I do???

Cracked iPhone 6 screen and screen is all white with different colors going down it. What do I do???

Take it in for repair or exchange. Be prepared to write a pretty big check unless you bought AppleCare+.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

My Imac The DVD drive have stopped working, the DVD goes in, the computer read it and it comes out again ..

My Imac The DVD drive have stopped working, the DVD goes in, the computer read it and it comes out again ..
Sofaware is: OS X 10.8.5 (12F37)
Can anybody please help, or would I need to buy a new drive?

Have you tried one of those CD cleaning Discs yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Hi ....using iphoto '08, but whenever i export photos to mail, they all come out small size, regardless of which size i choose. please help.

hi ....using iphoto '08, but whenever i export photos to mail, they all come out small size, regardless of which size i choose. please help.

After they get into the email go to the small menu at the lower right hand corner of the Mail window and select the size you want:
Click to view full size

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

I updated to IOS 6 and now it is frozen with a picture of a cord to connect to ITunes

Hi I updated to IOS 6 on my IPod touch and now it is frozen with a picture to connect to ITunes

What happens when you connect the iPod to your computer and restore via iTunes?
If iTunes does not see your iPod
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

I have just purchased an iphone today and it is coming up with a picture on the screen of the usb connector and itunes symbol. It also says that I now have no service and can only make emergency calls

Just a thought, but maybe consider returning the device. Seems it might be a bit too complicated for you.

So I recently upgraded my ram to 8GB but so far I haven't seen any improvement. I ran some tests and everything turned out fine with the ram. What should i do?

So I recently upgraded my ram to 8GB but so far I haven't seen any improvement. I ran some tests and everything turned out fine with the ram. What should i do?

What is the problem exactly???
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

When did video and 3D come out in Photoshop?

When did video and 3D come out in Photoshop?

If I recall it was CS3 as that was the first version that had a standard and an extended version.

System Language is English but all documents and reports come out in French

System Language is English but all documents and reports come out in French. How do I get the system to switch all of the documents and reports to print in the English layouts?
thx, Richard.

Richard,
Probably this is due to what Dan has pointed out.
You can open the PLD template and go to Print Layout Design menu on the Top and click Display document properties. Check the language properties.
Suda

Sometimes I take a photo on 4S and it comes out white with no picture.

Similar Messages

Maybe you are looking for