Sometimes it wakes up moments after I put it to sleep

I push the power button to make my iMac goto sleep. Sometimes it will come right back on a few seconds after doing so. I push the power button again and this time it goes to sleep without problems. Does anyone know why I'm experiencing this with my Mac?
Thanks.

I've had many similar problems when I was using a PowerMac G5 Late 2005 Dual 2.3 GHz: it simply did not stay asleep! I then found that when I wanted to stay in sleep mode indefinitely I had to unplug the ethernet cable from the Mac, since it located ethernet traffic even if the "Wake for Ethernet Network Administrator Access" option was turned off under the "Options" in the Energy Saver Control Panel, in System Preferences... Until I found that glitch, I even brought it to the AppleCare in my town to check for that strange behaviour.
Now I have an iMac 24" (eraly 2008) 3.06GHz and that option is turned off, and when I put it to sleep (in those very rare occasions, I must admit!), it does sleep indeed!
I hope I have been of some help.

Similar Messages

Computer now wakes up immediately after I put it to sleep!!

I've got a dual G5 running Panther and I put it to sleep when I go to work in the morning. Last night, I wanted to try out Tiger (yes, I know - I'm way behind the times) so I installed it on a FireWire drive and booted off it for a couple of hours to see how things worked. I then went back to my internal Panther drive, and everything is ok except for one thing: when I hit "sleep", it goes to sleep, the screens turn off, and then for some reason I immediately hear the internal drives spin back up and the thing turns on again!! Why can't it stay asleep?!?

Sleep is one of the activities controlled by the PMU. A reset of the PMU may
be in order:
http://docs.info.apple.com/article.html?artnum=86760
what settings will be cleared by this (what will I lose and need to set up again)? any system Settings, firmware updates, or whatever?
Also, I trust that you have reviewed your Energy saving preferences to confirm
that they are set to allow sleep, and not to disturb said sleep?
which ones in particular? I think they're fine but maybe I'm missing something that got munged somehow. Where are the "disturb"-type settings? I've got "wake on LAN access" clicked off for example. What else is there?
Thanks,
Mike

Several minutes after it puts display to sleep, network get disconnected.

Several minutes after it puts display to sleep, network get disconnected.
I am sure that it get disconnected because I check the router traffic from another MAC and it get disconnected.
No mother if its connected by cable or wifi, it get disconnected.
In Energy Saver properties "Computer sleep" is set to "Never" and "Display sleep" is set in "10 minutes".
"Wake for network access" is checked but it will never work if network get disconnected.
"Automatically reduce brightness before display goes to sleep" is checked
All the other options are NOT checked.
I hope someone from this community can help me with this issue.

try resetting PRAM
http://docs.info.apple.com/article.html?artnum=2238
and SMC
http://docs.info.apple.com/article.html?artnum=303319

My iMac 10.6.8 will not stay asleep. It keeps coming back on seconds or minutes after I put it to sleep.

My iMac will not stay asleep. A few seconds to a few minutes after I put it to sleep, it comes back on.

OK, a few more things coming to mind:
Set the energy saver to sleep in 1 min
Diconnect every single peripheral you have connected to your iMac
Eject any DVD/CD you may have in the drive
Turn off all applications you have running
iTunes or DVD Player could be waking it constantly up if accessing your drives
Messaging apps could be looking for internet connection
Disable Wi-Fi
Disable Bluetooth - you don't have cells paired to it, do you?
Disconect Ethernet cable (if connected)
Spotlight - is it indexing your drive? (a dot within a magnifying glass would be pulsating and won't let your Mac go to sleep)
Connect a wired mouse - if you have it - and go to Apple menu then click SLEEP
If it remains asleep, keep adding all apps, devices and services back until you find which one is causing it.
If nothing helps, then I'm out of ideas....
In case you have Apple TV - the remote can indeed make it wake up.

My iMac with OS X v10.6 keeps coming back on soon after I put it to sleep for no apparent reason.

my iMac with OS X v10.6 keeps coming back on after I put it to sleep for no apparent reason. How can I stop this from happening?

Reset the SMC, as per > Resetting the System Management Controller
If it's still not sleeping, see > Why your Mac might not sleep or stay in sleep mode

My iMac often restarts by itself after I put it to sleep

Often my iMac restarts by itself after I put it to sleep, even when my router is off.

I'm encountering the same issue with my mid-2011 iMac 12,1 restarting after being in sleep.
I want to try deleting some startup files/folders as listed in your previous post. When it comes to the following:
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Do I delete the entire folder or just the files in each folder? Do I delete all files or am I looking for some in particular?

G5 Shuts down after I put it to Sleep

Why is my G5 suddenly shutting down all the time when I put it to sleep .... I come back to use it and I have to power it up each time ?

To log a sequence of events:
Open the Console application, located in Applications/Utilities.
Click Logs in the toolbar.
Click the triangle next to a log to see more available logs.
Select the appropriate log and click Clear.
Perform the actions that produced the problem you are troubleshooting.
Read the messages that appear in the Console window.
Hello .... I can't seem to find where to " Search " and enter " Shut Down " .... I have opened Console and and able to open the triangles on many things ... This is one of them ... is this the correct one below ?
ALSO - about 4 - 5 years approx. after the warranty expired I had a problem with the power supply and Apple Canada replaced it and the Mother Board free of charge $ 1300.00 would have been the cost there abouts ... Does this mean the same thing is happening again ??? I doubt if I have the info and the paperwork for that repair ( dumb me, I wish I did now ) .... Is there a way for me to find that info with my serial number ?
If so - do you know why it would happen again and if so , is Apple still prepared to stand behind their product once again ?
Thanks Much for you Help .... is the " below " does not show you what you asked me to find ... what are the steps I should do for you ... ?
Eric
Jun 28 19:35:50 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
Jun 28 19:35:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:41:40 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
Jun 28 19:47:34 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
Jun 28 19:47:34 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:34 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:35 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
Jun 28 19:47:35 Eric-Willies-Computer cp: error processing extended attributes: Operation not permitted
Jun 28 19:47:35 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:44 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:45 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:46 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:47 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:48 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:48 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:47:50 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:48:51 Eric-Willies-Computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jun 28 19:48:51 Eric-Willies-Computer shutdown: reboot by ericwillie:
Jun 28 19:48:52 Eric-Willies-Computer SystemStarter[706]: authentication service (714) did not complete successfully
Jun 28 19:49:57 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 28 19:49:56 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[33]: starting
Jun 28 19:49:58 localhost kernel[0]: vmpagebootstrap: 508164 free pages
Jun 28 19:49:56 localhost memberd[43]: memberd starting up
Jun 28 19:49:58 localhost kernel[0]: migtable_maxdispl = 70
Jun 28 19:49:57 localhost lookupd[42]: lookupd (version 369.8) starting - Mon Jun 28 19:49:57 2010
Jun 28 19:49:58 localhost kernel[0]: 96 prelinked modules
Jun 28 19:49:58 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jun 28 19:49:58 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jun 28 19:49:58 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Jun 28 19:49:58 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Jun 28 19:49:58 localhost kernel[0]: DART enabled
Jun 28 19:49:58 localhost kernel[0]: USB caused wake event (EHCI)
Jun 28 19:49:58 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 000d93ff fe466022; max speed s400.
Jun 28 19:49:58 localhost kernel[0]: Security auditing service present
Jun 28 19:49:58 localhost kernel[0]: BSM auditing present
Jun 28 19:49:58 localhost kernel[0]: disabled
Jun 28 19:49:58 localhost kernel[0]: rooting via boot-uuid from /chosen: 9FA6414F-22D6-339E-B202-EB404D827F6C
Jun 28 19:49:58 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jun 28 19:49:58 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST380013AS Media/IOApplePartitionScheme/Untitled@3
Jun 28 19:49:58 localhost kernel[0]: BSD root: disk0s3, major 14, minor 2
Jun 28 19:49:58 localhost kernel[0]: AppleSMU -- shutdown cause = 2
Jun 28 19:49:58 localhost kernel[0]: AppleSMU::PMU vers = 0x000d0054, SPU vers = 0x15, SDB vers = 0x01,
Jun 28 19:49:58 localhost kernel[0]: Jettisoning kernel linker.
Jun 28 19:49:58 localhost kernel[0]: Resetting IOCatalogue.
Jun 28 19:49:58 localhost kernel[0]: Matching service count = 1
Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
Jun 28 19:49:58 localhost kernel[0]: Matching service count = 2
Jun 28 19:49:58 localhost kernel[0]: Matching service count = 4
Jun 28 19:49:58 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Jun 28 19:49:58 localhost kernel[0]: NVDANV30HAL loaded and registered.
Jun 28 19:49:58 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Jun 28 19:49:58 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Jun 28 19:50:01 localhost diskarbitrationd[41]: disk0s3 hfs 9FA6414F-22D6-339E-B202-EB404D827F6C Macintosh HD /
Jun 28 19:50:01 localhost diskarbitrationd[41]: disk1s1 msdos 00000000-0000-0000-0000-000000000000 LACIE [not mounted]
Jun 28 19:50:02 localhost usbmuxd[37]: usbmuxd-196 built for iTunesNineTwo on May 17 2010 at 13:53:51, running 32 bit
Jun 28 19:50:02 localhost DirectoryService[53]: Launched version 2.1 (v353.6)
Jun 28 19:50:04 localhost kernel[0]: UniNEnet: Ethernet address 00:0d:93:46:60:22
Jun 28 19:50:04 localhost lookupd[67]: lookupd (version 369.8) starting - Mon Jun 28 19:50:04 2010
Jun 28 19:50:05 localhost kernel[0]: NVDA,Display-A: vram [a0000000:08000000]
Jun 28 19:50:06 localhost kernel[0]: NVDA,Display-B: vram [00000000:01000000]
Jun 28 19:50:07 localhost kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Jun 28 19:50:07 Eric-Willies-Computer configd[39]: setting hostname to "Eric-Willies-Computer.local"
Jun 28 19:50:09 Eric-Willies-Computer launchd: Server 2b1b in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[67]: exited abnormally: Hangup
Jun 28 19:50:09 Eric-Willies-Computer configd[39]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Jun 28 19:50:09 Eric-Willies-Computer configd[39]: posting notification com.apple.system.config.network_change
Jun 28 19:50:09 Eric-Willies-Computer lookupd[73]: lookupd (version 369.8) starting - Mon Jun 28 19:50:09 2010
Jun 28 19:50:11 Eric-Willies-Computer mDNSResponder: Adding browse domain local.
Jun 28 19:50:12 Eric-Willies-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Jun 28 19:50:13 Eric-Willies-Computer configd[39]: target=enable-network: disabled
Jun 28 19:50:21 Eric-Willies-Computer loginwindow[71]: Login Window Started Security Agent
Jun 28 22:39:21 Eric-Willies-Computer diskarbitrationd[41]: disk1s1 msdos 00000000-0000-0000-0000-000000000000 LACIE /Volumes/LACIE

Computer keeps waking up immediately after I put it to sleep

I've got a dual G5 running Panther and I put it to sleep when I go to work in the morning. Last night, I wanted to try out Tiger (yes, I know - I'm way behind the times) so I installed it on a FireWire drive and booted off it for a couple of hours to see how things worked. I then went back to my internal Panther drive, and noticed that when I hit "sleep", it goes to sleep, the screens turn off, and then for some reason I immediately hear the internal drives spin back up and the thing turns on again!! Why can't it stay asleep?!?

That is common and in my sleep tips;
"USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit."
 DALE

GT70 BSOD or Stuck after Windows puts it to sleep mode of turns off monitor

Hi Everyone!
i have an issue (or 2) with my laptop.
both happens when:
1) whenever i put the laptop into sleep mode or either windows does so automatically (inactive period), - the laptop will go to sleep just fine.
2) windows turns off monitor after a period of inactivity. (sleep mode due to inactivity was disabled in this case)
in both the cases i mentions above, if i wake the computer within lets say 5 minutes, it'll turn on just fine.
but after a certain period of time passes it wont.
with the sleep mode, the computer will wake and will then produce a BSOD STOP error 0x4 and restart.
with monitor turned off it'll simply wont turn on, not responding to neither keyboard, mouse or power button. - i have to do a hard reboot
any ideas?
anything i can check?
note the laptop just came back from a warranty repair, so all parts have been tested and been found ok!
system specs:
MSI GT70-0ND
CPU: Intel Core i7-3630QM 2.4GHz (Intel GPU HD 4000 included)
Memory: 16GB DDR3
Storage: 750GB HDD 7200rpm
128GB SSD (Patriot Pyro SE) - OS installed on this.
GPU: 4GB NVIDIA Geforce GTX 675MX
OS: Windows 7 64bit
Thanks in Advance!!

i dont think i have the same problem as in the other thread.
my bios:
my laptop doesnt restart when my screen is turned off and i try to wake it. it would simply wont wake up.
and my BSOD happens only after i wake the laptop from sleep mode and only if it been in sleep mode for a while. meaning i if i wake it up within a few mins of going to sleep it'll boot justfine.

Since downloading Maverick, my iMac turns itself on, even after I put it to sleep. I go away and when I come back, it's switched on!!!

Since downloading Maverick, my iMac switches itself back on after I have put it to sleep.
It does not do it every time but has done it several times. Any ideas on how to stop this?

If you have more than one user account, these instructions must be carried out as an administrator.
Please triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq wake | awk '/:/{$4=""; print}' | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

IMac switches back on, after I put it to sleep?

My system often switches back on, after I have put it to sleep, so have to put it too sleep again, any idea what is going on?

Go to the Applications/Utilities folder and launch the Console application. When the Console window opens, make sure that 'All Messages' is selected in the left column, then type 'wake' in the filter search box in the upper right corner. You should see a listing of all the wake events recorded by your system, and a coded reason for the wake event. It will help provide clues.
The following article will help explain the various wake codes and what might be causing the wake event to occur. The article also provides a terminal command providing a different method for pulling up the log entries.
http://support.apple.com/kb/TS3191
If you post the offending wake issue log entries then we can provide additional comments/suggestions.

My macbook pro keeps restarting after i put it to sleep.

I have a Macbook pro 15" retina display. I began to have this problem after i installed Yosemite, I put it to sleep and after 20 minutes aproximately, it restarts. Sounds, light, everything.
At first i tought it happened only when i left the screen open, but Even with the screen closed it restarts. I put it to sleep and then, suddenly, i heard the sound of restarting and i verified it when i opened the screen and there was a message that it had occured a problem and the system had to restart.
It didn´t happened with Mavericks.
Any suggestions? please help me.
Thank you

I have a Macbook pro 15" retina display. I began to have this problem after i installed Yosemite, I put it to sleep and after 20 minutes aproximately, it restarts. Sounds, light, everything.
At first i tought it happened only when i left the screen open, but Even with the screen closed it restarts. I put it to sleep and then, suddenly, i heard the sound of restarting and i verified it when i opened the screen and there was a message that it had occured a problem and the system had to restart.
It didn´t happened with Mavericks.
Any suggestions? please help me.
Thank you

Why does computer turn itself back on after i put it to sleep?

This computer ( HP Pavilion Slimline model# s5107c, Product # NP212AA-ABA, Software Build 93NAv6PrA3 ) runs on VISTA Home Premium-64. It had a virus which required the technician to save my files and wipe everything out and then reinstall VISTA and my files. Since then when I put the computer in sleep mode, it turns itself back on after a few minutes.
I can find the settings for having the computer put itself to sleep after so many minutes, but can't find any setting for the computer turning itself back on.
Help please. The computer tech has not been able to help me thus far.
This question was solved.
View Solution.

Found this step online. Hope it works for you.
Go to >>> "ScreenSaver" >>> "Change Power Settings" >>> "Change Plan Settings" >>> "Change Advance Power Settings" >>> "Multimedia Settings" >>> "When Sharing Media" >>> and make sure the setting says "ALLOW THE COMPUTER TO SLEEP."

I can't turn my laptop on after I put it to sleep. What's wrong with it?

Hi. What's wrong with my laptop? I put it to sleep then won't turn on anymore.

First, you can force the Mac to shutdown by pasting in this command in Terminal (in Applications>Utilities). Only paste it in. Don't try to type it.
sudo shutdown -h now
Hit return. You will be asked for your admin password. Nothing will appear on the screen when you type it in. This is normal. You will also get a warning about using sudo, which you can ignore. This is safe. After you enter your pword, hit return again.
Then, boot up again into Verbose Mode by holding down the v key at the startup chime. This will bring you to a screen that shows the boot sequence in text as its loading. It will go by kind of fast, but we're not interested in the bootup process. Next, do a normal shutdown and you may be brought to the same kind of text screen, which will show the shutdown sequence. (I know this works this way in Snow Leopard after booting in Verbose mode; not sure about Tiger, though.) If it hangs, it may show in what part of the shutdown process it's hanging. Have a camera or note paper ready to write down where it's getting stuck.
One other thing to try is an SMC Reset. Unplug from wall power, leave for ten minutes, then hold in the power button for five seconds. Reconnect to power and startup again.

My Iphone 5 is not turning on after I put it to sleep. Help?

Hello there. I have some trouble with my phone. I was downloading a movie on my iphone 5, and I needed more space. I went to settings and deleted the apps I don't need. It froze and I put it to sleep. I tried to get back on, and it wouldn't let me. I can still use Siri and can hear the noises, but I can't turn it off. It won't turn back on! I updated to the IOS 7. Please help!
Thanks!

Try a reset.
Hold the lock/power button and the home button at the same time until you see the Apple logo on the screen.
No data will be lost.
Let us know if that has any effect.

Sometimes it wakes up moments after I put it to sleep

Similar Messages

Maybe you are looking for