Sometimes my play and pause button(F8) is not working.

I don't know why, sometimes the button of play and pause button is not working why?
do you have any advice or do you think is broken??

Try resetting the PRAM (if you are able to do so).
Otherwise, I would take it in for diagnosis.
Barry

Similar Messages

Play and Pause button

Hello,
Because my playbar is disabled due to my pretest within my file I dont have a play and pause button.
i have created 2 buttons. One to pause the program and the other to play.
The problem is, once I click on the pause button, then on the play, then on the pause again - the pause button is disabled. in other words, i am only ever able to click on either one of the buttons once.
I have the 'infinite' button checked but i am still not sure why its not working.
-Stephanie

Hi Stephanie,
You didn't tell how you trigger pause/play with those 'buttons' - since you are on CP6 or later, use shape buttons that can be put on the master slides or timed for the rest of the project.
http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6
http://blog.lilybiri.com/toggle-shape-buttons
If you use a simple action (using the Action accordion), another possibility besides the excellent event-handler widget (only for SWF-output) is to replace it by a standard action: http://blog.lilybiri.com/why-choose-standard-over-simple-action
Lilybiri

The play and pause buttons in control center

the play and pause buttons in control center some times work and some times not !!!
any solution please ? !

Hi m-tillawy,
Thanks for using Apple Support Communities. I would try a restart/reset of the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the issue persists after that, I would attempt a reset of all settings as per this article:
Reset iPhone Settings - iPhone User Guide
http://help.apple.com/iphone/7/#/iph7a2a9399b
Reset iPhone settings
Reset iPhone settings. Go to Settings > General > Reset, then choose an option:Reset All Settings: All your preferences and settings are reset.
Cheers,
- Ari

Play and pause button and control bar are missing below xfinity player

when I want to watch a video noticed play and pause button and control bar are missing below xfinity player.

For the two soundchannel sounds you have, you will need to keep track if and which one is playing so that you can use some logic to stop the sound right after you mark where the sound was (position) so that you can resume playing it again when the play button is selected.
So if the stroke sound is started, you could assign a boolean variable named something like 'strokeplaying' to be true (setting the other sounds similar boolean false). Then, in your pause function you would test to see if strokeplaying is true and if it is, store the position property and stop the channel playing.
When play is selected, similarly, you test if that sound is true and if so you restart it using the position value you stored as the starting point. You do the same for the other sound... remembering that it is possible neither is playing when pause it clicked.

My apple wireless keyboard is not responding on all the buttons starting from esc up to the play and pause button,please can u help me on how to solve this problem

The mission control,launchpad ,two brightness button,reverse & play & pause button are not working on my apple wireless keyboard,please help me

Try resetting the PRAM (if you are able to do so).
Otherwise, I would take it in for diagnosis.
Barry

My iPhone went black and the hold the power and home button solution will not work

My iPhone went black and the hold the power and home button solution will not work

Make sure it's charged.
Try to Reset your device:
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

Play/Pause Button Captivate 3 not working properly

I am using Captivate 3, but my play/pause button is not working properly. I can publish and upload to my LMS, but when I click the pause button the first time the mode changes but the project keeps playing. I have to click two more times and then it works. Can anyone offer any assistance? Thanks so much!

Hello @Unit_27 ,
Welcome to the HP Forums!
Thank you for the information about your keyboard! I'll see what I can do to help
I think it would be a good idea to take apart the keyboard, or some of it, to determine if the keys are obstructed somehow. Some information on the supported method of cleaning the keyboard is mentioned in this document: Cleaning your Notebook PC
If this does not resolve the issue, I would reinstall Windows on the computer. The issue at this point would be software related, to some unknown extent. A recovery will address any software issue. First, make sure you backup everything you need to. Here is some information on how to do this: Backing Up Your Files
Once this is done, it is safe to reinstall the computer. Here is some additional information on how to do this properly: Performing an HP System Recovery
Please let me know if you have any other questions. Thanks and have a great day!
Mario
I worked on behalf of HP.

Pavilion G7-1070us play/ pause button on keyboard not working

My pavilion G7 has been a great computer for me but now it has started to experience a problem. The Play/pause button on the keyboard (f7 key) does not play or pause the music.
I have the pavilion G7-1070us with windows 7.
Please help

Hello @Unit_27 ,
Welcome to the HP Forums!
Thank you for the information about your keyboard! I'll see what I can do to help
I think it would be a good idea to take apart the keyboard, or some of it, to determine if the keys are obstructed somehow. Some information on the supported method of cleaning the keyboard is mentioned in this document: Cleaning your Notebook PC
If this does not resolve the issue, I would reinstall Windows on the computer. The issue at this point would be software related, to some unknown extent. A recovery will address any software issue. First, make sure you backup everything you need to. Here is some information on how to do this: Backing Up Your Files
Once this is done, it is safe to reinstall the computer. Here is some additional information on how to do this properly: Performing an HP System Recovery
Please let me know if you have any other questions. Thanks and have a great day!
Mario
I worked on behalf of HP.

HT5957 I have downloaded the ios 7 for my ipad and now my screen is locked and shows a plug pointing towards an itunes symbol. Does anyone have an way out of this frustrating problem? Holding down the home and power buttons together has not worked.

I have downloaded ios 7.2 update for my ipad and now my screen is locked and shows a picture of a plug and the itunes symbol. Does anyone have advice to fix this frustrating problem? I have seen help online for iphones, but none for ipads. The screen will not budge. I have tried holding down the power and home buttons at the same time, to no avail. Please, can some of you smart people help me?

Hi there Martha250,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

Satellite L505 - decimal button and '8' button on numpad not working

hi
my decimal and 8 buttons on my laptop's numpad don't work. it seems to work after a few minutes of keyboard bashing the alt+ctrl+shift+fn+arrows buttons, then as soon as i move away from my computer it stops functioning again. does anyone have the button solution to turn them on? also, does anyone know how to disable this?
thanks

> {quote:title=Mohh wrote:}{quote}
> 3 years
> it works on and off, last worked a couple days ago.
> how do i update my bios without wrecking anything?
> not in warranty, from ebay.
BIOS suggestion was really for if the WHOLE keypad wasn't working from new. Windows driver problem (corrupted) would be more likely than BIOS issue. Although I think the whole keyboard is on the same driver. You could check if the keyboard driver is working properly (start->control panel->system->device manager) or try re-installing the keyboard driver.
It's most likely a hardware problem though which the BIOS or Drivers won't fix. You need to take it for a service and will obviously need to pay to have it fixed. Lots of people have reported similar problems on the internet.
Drivers for Windows 7 are here:
http://uk.computers.toshiba-europe.com/innovation/windows7_drivers.jsp?service=UK
BIOS updates are in the 'Support' menu in the same link.
Obviously you need to use the correct software for the correct model of computer or you could make things a LOT worse.
BIOS instructions here:
http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm
Message was edited by: badhat
Message was edited by: badhat

My IPod touch 4G's volume and lock buttons have been not working properly What should I do that isn't too costly

My iPod volume and lock button have not been working right ever since its battery died it did start to work again but then it stopped working. I'm very confused about how I should go about fixing this please help.

Try:
- Reset the iOS device As best you can). Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If not under warranty or abused
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Try fixing it yourself if you are up to it
iPod Touch Repair – iFixit

Icloud and twitter button gone grey not working

My icloud & twitter button on my ipod touch has gone grey not working how ever it's working fine on my iphon 4 both the devices are ios5 any help in this regard will be highly appreciated.

You need to turn off the restriction you've set to allow changes to accounts in:
Settings > General > Restrictions > (Allow Changes:) > Accounts

Back button forward button, refresh and cancel button all do not work they are always grey out and the drop down history by forward arrow doesn't work either

when I go to another website the back button to the home button never works. the home button works. I can't do any or the above mentioned features

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

HTML5/quicktime player plays and pauses several times a second

We've been getting some weird entries in our statistics logging on our streaming media system, and I've managed to not-so-much recreate the problem as be around when it occurs.
Playing about with the interface (scrubbing quickly, then playing/pausing repeatedly, etc) doesn't seem to trigger the problem - it just seems to happen occasionally after a few minutes of a player being open in full-screen mode.
The actual symptoms are the the stream suddenly starts pausing and playing incredibly quickly - upwards of 10 times a second - and you can see the play and pause buttons swapping incredibly quickly. We're not getting this problem with any other of our players, and we're using the iPad's built-in player, not our own HTML5 player, although I'm still not entirely convinced it isn't a bug with our servers.
The stream also seems to start looping, and as soon as it reaches the end of the stream it starts again, which is making me wonder if it's a bug with the UI itself, as if the play and pause buttons are getting triggered constantly, but changing the rotation doesn't stop it happening. I also wondered if it was something silly, like someone sneezing on the screen and the moisture triggering the touch screen, but that doesn't seem to be the problem either.
Has anyone else seen this behaviour before? I don't seem to be able to directly trigger it - it just seems to happen occasionally.
I'm trying to get a video of the symptoms, but it's not playing ball at the moment. If I can get it to do it again, I'll add a video example in a later post/edit.

We've been getting some weird entries in our statistics logging on our streaming media system, and I've managed to not-so-much recreate the problem as be around when it occurs.
Playing about with the interface (scrubbing quickly, then playing/pausing repeatedly, etc) doesn't seem to trigger the problem - it just seems to happen occasionally after a few minutes of a player being open in full-screen mode.
The actual symptoms are the the stream suddenly starts pausing and playing incredibly quickly - upwards of 10 times a second - and you can see the play and pause buttons swapping incredibly quickly. We're not getting this problem with any other of our players, and we're using the iPad's built-in player, not our own HTML5 player, although I'm still not entirely convinced it isn't a bug with our servers.
The stream also seems to start looping, and as soon as it reaches the end of the stream it starts again, which is making me wonder if it's a bug with the UI itself, as if the play and pause buttons are getting triggered constantly, but changing the rotation doesn't stop it happening. I also wondered if it was something silly, like someone sneezing on the screen and the moisture triggering the touch screen, but that doesn't seem to be the problem either.
Has anyone else seen this behaviour before? I don't seem to be able to directly trigger it - it just seems to happen occasionally.
I'm trying to get a video of the symptoms, but it's not playing ball at the moment. If I can get it to do it again, I'll add a video example in a later post/edit.

Play and plause button and control bar are missing belw xfinity player

<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/840891]</blockquote>
when watching video, can not see play and pause button and control bar, it is missing below xfinity player.

Ok BE...I took you advice and used a prebuilt skin, but tweeked it to get it looking how I wanted. However, now when I switch between the different videos, the playhead stays at the spot that it previously was. For example, if the playhead is currently 50% through video #1 and I click video #2, the playhead is still sitting at 50%. How would I reset the playhead to the beginning of the new video?
import fl.video.*;
var flvPlayer:FLVPlayback = new FLVPlayback();
addChild(flvPlayer);
flvPlayer.skin = "MySkin.swf";
flvPlayer.skinAutoHide = true;
flvPlayer.skinFadeTime = 300;
flvPlayer.x=78;
flvPlayer.y=89;
flvPlayer.width=640;
flvPlayer.height=360;
flvPlayer.source = "flv/Video1.f4v";
vid1.addEventListener(MouseEvent.CLICK, fl_ClickToSetSource1);
function fl_ClickToSetSource1(event:MouseEvent):void
flvPlayer.source = "flv/Video1.f4v";
vid2.addEventListener(MouseEvent.CLICK, fl_ClickToSetSource2);
function fl_ClickToSetSource2(event:MouseEvent):void
flvPlayer.source = "flv/Video2.f4v";
I know I need to do something in the setSource function, but don't know how.
Thanks.
Mike

Sometimes my play and pause button(F8) is not working.

Similar Messages

Maybe you are looking for