Sometimes my screen wont go horizontal when I want it to?

Alright when I am surfing the net, sometimes the page refuses to turn horizontal.
What is the "secret" to getting it to do that every time?
Do you have to crack your wrist hard or something?
Seems like that would be a bit brute?
Also, can you make emails go horizontal?
Or are they stuck vertical like texts?
And why hasnt apple figured out how to do horizontal texts to give us a better keyboard?

It should flip while the webpage is loading, is that the only time it won't flip? If you aren't having any other problems flipping the phone on the side and it transferring everything to horizontal mode, then do a backup of your iphone, then restore the firmware, then reload your backup and see how it works. If you are having a bunch of problems with the horizontal flipping then I would take it in to Apple and have them take a look at it.

Similar Messages

  • I have original ipod touch. Screen wont open and when I connect to itunes, i get message that it wont open without passcode.How can I get anywhere?

    My ipod touch screen is frozen. Screen reads " ipod in disabled. Connect to itunes"We have powered down several times.  When I hook to itunes I get message that it wont open without passcode being intered on ipod touch. I can't enter anything on touch. Any solutions?

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Screen wont stay off when turned off via ctrl - shift - eject, turns back on within 5-10 seconds - 10.7.2

    I usually have my MBP next to me and when I'm not using it I either use the hot-corner to turn the screen off or the ctrl - shift - eject keys.
    But when the screen is off it wakes up within 5-10 seconds every time, nothing I can see has changed since this didn't used to be an issue.
    It's always stayed off but recently it hasn't been.
    I'm on 10.7.2, I even shut down every app and just had it running stock OSX and it still does it.
    I have no peripherals connected to it, bluetooth is also off.
    Does anyone know of a fix or is this just happening to me?
    Many thanks in advances.

    i would take back to store and exchange.
    if this is new behaviour then make sure you running the latest update.
    if that doesn't fix it...hold off a few months and upgrade to torch 2 but if you still within exchange time from when you got it...exchange...within warranty time? rma it.

  • Screen wont shut off when I close the laptop after fresh install (L512)

    So I recently replaced the hard drive in an lenovo L512 with an i3. I've updated windows completely and installed I believe most of the drivers. Everything seems to be functioning perfectly. The only thing is when I close the laptop. The display does not shut off. Is there a driver I am missing? I am running windows 7 professional x64. completely legitimate copy with the original key from the laptop. Thanks for any help!

    jordN wrote:
    This only started happening after I upgraded from Windows 8.1 to Windows 10, I don't have a clue why it does it, but if I close the screen on my laptop and open it, the screen doesn't come back on it just stays off but the power light button comes on and the WiFi signal button is on but it is red as if the wifi is turned off, is anyone else having this problem or does anyone know how to fix it? I have to manually hold down the power button everytime I close my laptop to turn it off and then back on and once it is on it works perfectly, but I don't like holding the power button down for obvious reasons. Thank you.Go back to Windows 10, seems HP do not care about releasing up to date drivers for Windows 10, this is despite the problem you report also happening during BETA Testing of Windows 10 over TWELVE MONTHS AGO! It is only now HP are bothering to advise people not to upgrade, but yet they clearly won't reply in this topic, which is more or less about your problem from many different users! http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-10-Laptop-won-t-go-into-sleep-mode/m-p/5181173#M304826

  • Screen wont change directions when i turn it, it is set to do so in settings.

    I have a new Ipad 3rd gen. and noticed that it suddenly stopped turning the screen when I turn the Ipad.  It worked before then just stopped turning. Any ideas how to fix this?

    Rotation Lock is enabled.
    http://support.apple.com/kb/HT4085

  • My ipod slider screen wont show up when i push the home button when I try to unlock it.  When i plug it into the computar it still wont turn on. What do I do?

    My ipod slider screen won't show up when I push the home button to try and unlock it.  When I plug it into the computar it still won't turn on.  What should I do?

    Try the "Will not power on" troubleshooting in the following article:
    http://support.apple.com/kb/TS2771

  • Ipod screen wont turn off when recharging

    I have an 80Gig Ipod Video.
    Right now I am charging it via USB on my computer and the screen does not turn off.
    Is there something wrong with the Ipod?
    Can someone help me?
    Ive read the other threads about holding down the Menu and select button and have rebooted it several times
    As well and jostling the hold button on and off.
    Isnt the backlight supposed to turn off the screen while recharging?
    thanks for the help.

    The screen stays lit up so you can see what your ipod is doing while its plugged in. IE: OK TO DISCONNECT, or SYNC IN PROGRESS/EJECT BEFORE DISCONNECTING
    If you see the OK to disconnect text try closing itunes completely, this will let your ipod know its not in use.

  • SCREEN WONT SCROLL ACCROSS WHEN I TRY TO RIGISTER MY ITOUCH

    THIS IS REALLY TICKING ME OFF, IVE HAD THIS THING FOR A WEEK NOW AND HAVENT BEEN ABLE TO REGISTER IT.DO YOU EVEN NEED TO?. HAS ANYONE ELSE HAD THIS PROBLEM OR KNOW HOW TO FIX IT

    What resolution is your monitor set at? Try increasing your screen resolution so you can see the whole page: iTunes window does not display all options

  • Image sits too low on screen in Photoshop CC when I want to start working.

    When I have the image set to 'fit screen' it sits too low in the working space. Something has changed and I can't get it back. I have tried to restore settings but no effect. Any suggestions welcome? 

    My screen looks like this. Note how the image that has been opened sits rather low in the working space. In fact, a little bit of the bottom of the image has been clipped off despite going to the magnifying class and clicking 'Fit Screen'
    It is intensely irritating and never used to be like this. I am using the latest CC update and have Mavericks.  It appears like this when I double click the image in Bridge to open in Adobe CC. I can find no way to drag the image up a bit or reset anything.

  • VLC fullscreen sometimes makes screen stay black after video ends

    like the subject says, sometimes the screen just stays black when a video ends while VLC is in fullscreen mode.
    I'm using VLC 2.0.8.a-1. I got the laptop in April, just in time for Revision 2013, had the problem more or less from the start, so that's since version 2.0.5 or 2.0.6
    So far I haven't found a way to get things back to normal when it happens. I've tried
    press f
    press ESC
    close and reopen lid
    switch to console (screen just stays black, even on consoles)
    Apparently the only thing I can do is pop up a terminal window via shortcut and reboot.
    As far as I can tell /var/log/Xorg.[0,1].log doesn't tell what's going on.
    In case it's important, I've only experienced this on my Thinkpad T430, it never happend on my old ASUS laptop or on my desktop pc. An Intel issue maybe? The other two run on nvidia cards, the T430 does have an nvidia card in addition to the on-chip HD 4000 but I don't use it (I'd love to since the DP port is only usable with the nvidia card, haven't been able to make it work with bumblebee yet but that's a different issue).
    Any ideas? Which log and config files do you need?

    like the subject says, sometimes the screen just stays black when a video ends while VLC is in fullscreen mode.
    I'm using VLC 2.0.8.a-1. I got the laptop in April, just in time for Revision 2013, had the problem more or less from the start, so that's since version 2.0.5 or 2.0.6
    So far I haven't found a way to get things back to normal when it happens. I've tried
    press f
    press ESC
    close and reopen lid
    switch to console (screen just stays black, even on consoles)
    Apparently the only thing I can do is pop up a terminal window via shortcut and reboot.
    As far as I can tell /var/log/Xorg.[0,1].log doesn't tell what's going on.
    In case it's important, I've only experienced this on my Thinkpad T430, it never happend on my old ASUS laptop or on my desktop pc. An Intel issue maybe? The other two run on nvidia cards, the T430 does have an nvidia card in addition to the on-chip HD 4000 but I don't use it (I'd love to since the DP port is only usable with the nvidia card, haven't been able to make it work with bumblebee yet but that's a different issue).
    Any ideas? Which log and config files do you need?

  • HT1539 the movie uploaded to my itunes but it wont show in my movie folder when i want to add it to my iphone. how do i get it into my iphone

    how do i transfer my movie to my iphone. its showing up on itunes but it wont show up when i want to put it on my phone

    I FIGURED IT OUT. THANK FREAKING GOD!
    This is what I did:
    I went to control panel and unistalled iTunes completely, then I installed 10.6.3
    http://support.apple.com/downloads/#itunes which you can find here
    It came up with an error saying that my library had beed used with a more updated verision, basically had to upgrade. I installed iTunes 10.7
    After it had installed and iTunes was running I hooked up both my iPhone and my flash drive, I have more than 1 usb port I figure most computers do now, and by the time and date in the bottom right corner a small icon came up showing that I had devices hooked up. It showed both my iPhone (but did not know what it was) and my flash drive. If you right click on the iPhone it has the option to Troubleshoot it. I did it and my iPhone 5 now FINALLY SYNCS!
    I'm sooo happy now.

  • My iPhone 6 wont come on when home button is pressed and screen pixels out and fades.  Any one have fix or same problem?

    My iPhone 6 wont come on when home button is pressed and screen pixels out and fades.  Any one have fix or same problem?
    When I press the home page the screen activates but stays black.  I have to press the side button to turn if off then may have to repeat several times to get my phone to come on.  Sometimes while using the phone the screen will become pixelly and start to fade away leaving a white screen with vertical line on it.  I have to use the close button to make it go away.

    If one of the two major buttons of your phone is broken, it is unfair to expect normal operation to be available. The first resolution to any problem involves a usable Home button, as does the second option for resolving any problem.  Get your Home button fixed.

  • My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

    My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

    Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
    Call Apple Care and see if your device is still under warranty to get it replace

  • Hi, my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I

    Hi,
    my macbook screen goes black at random points when I am using it. I know it is still running as music continues to play and I can vaguely make out the content of what is on the screen. Sometimes the screen will flicker between black and normal. Can I fix this?

    Emily..
    Could be the graphics card, run the Apple Hardware Test
    If the hardware test doesn't reveal any problems, use Lion Recovery.

  • Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

    Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks

    I understand that Firefox is no longer working on your Windows Tablet. The development of Metro did stop and has been discontinued. However what version were you on before this started to happen?

Maybe you are looking for

  • Extended desktop mode with external display

    I use my Macbook with an external display. Sometimes I need to use extended desktop mode and sometimes I don't need the extra desktop space and prefer to work only with my external display. My needs change as I work throughout the day and I'm getting

  • Changing the Date and Time of photos

    Hello, i have been importing images from my windows machine and want all the dates to be correct, i have seen the adjust date and time, and made the changes but under the events the dates dont change and when i click individual photos the dates and t

  • PI-ECC connection (IDOC scenario), how to debug? (External BP)

    Hello everybody, In PI -> ECC IDOC scenario I have encountered a debugging problem Delivery IDOC is being sent from PI to ECC. It is processed with IDOC_INPUT_DELVRY FModule. The question is how to debug this communication? I try to set external brea

  • Zooming In on a Panned Image

    I'm panning on an image 2kx2k pixels. Panning is working wonderfully. I added a scrollRect to the image container and test the mouse position blah blah blah....I'm trying to add zoom and now things have gotten a little hairy Main Movie -> PanClass Ob

  • How can I make a chart ignore cells until their value is changed from 0?

    In the corresponding table, I used conditional formatting to hide zeros in the highlighted row by conditionally changing the text color to that of the table background. However, the zero value's are still represented in the corresponding chart as you