Sometimes PNG thumbnails are tiny and image displays tiny in slideshow

I switched to Bridge CS4 in hopes of fixing this problem, and it got much better, but every now and then one or two of my PNGs will still get stuck in what I call "tiny mode" where the thumbnail preview remains set at a fixed tiny size no matter how you adjust the thumbnail preview size slider. When you view the image in slideshow mode it displays as tiny. On the thumbnail page no dimensions will display below an image in tiny mode. I can open it in Photoshop CS3 and everything looks fine and the image is full size. What am I doing wrong?

First thing to try when thumbs don't display properly is to purge the cache. Point Bridge to the folder with troubled thumbs and use the tools menu / cache / purge cache for folder.

Similar Messages

Table layout and image display problems

Im having a few problems at the moment, designing a layout
using tables. I need to have 3 seperate tables, 1 for the left
side, 1 for middle and 1 for the right. However I can only get the
left and middle table on the same row, after that the right table
jumps down to the next row.
My second problem is with some images displaying in the
preview. 3 images wont display, they are the same extension (.jpg),
in the same folder as the rest but unlike the others wont display.
I can swap them out for other images which display fine so I cant
understand why they arent showing.
Any help would be most appreciated.

> Im having a few problems at the moment, designing a
layout using tables. I
> need
> to have 3 seperate tables, 1 for the left side, 1 for
middle and 1 for the
> right. However I can only get the left and middle table
on the same row,
> after
> that the right table jumps down to the next row.
Use a three column, 1 row table, and put one of your tables
into each of the
three cells.
> so I cant understand why they arent showing.
Show us the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Isileth" <[email protected]> wrote in
message
news:ev0dpc$60t$[email protected]..
> Im having a few problems at the moment, designing a
layout using tables. I
> need
> to have 3 seperate tables, 1 for the left side, 1 for
middle and 1 for the
> right. However I can only get the left and middle table
on the same row,
> after
> that the right table jumps down to the next row.
>
> My second problem is with some images displaying in the
preview. 3 images
> wont
> display, they are the same extension (.jpg), in the same
folder as the
> rest but
> unlike the others wont display. I can swap them out for
other images which
> display fine so I cant understand why they arent
showing.
>
> Any help would be most appreciated.
>

In Firefox v33, new tab page thumbnails are blurry and over-sized

Since updating to Firefox v33, my new tab page thumbnails are blurry. They are also over-sized compared to what they were before the update.

Firefox automatically adjusts the number of columns that fit on the about:newtab page if you adjust the width of the Firefox window or zoom the page in or out and no longer resizes the thumbnails.
The current release doesn't resize the thumbnails, but instead reduces the number of tiles to fit the current screen width, so you may not see the number of columns that is specified via the browser.newtabpage.columns pref.
Zoom out the about:newtab page to see more tiles.
Make sure that you have only one tab with the about:newtab page open.
See also this extension:
*New Tab Tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/

Photos are dark and cannot be used in slideshow mode. Also cannot move photos in a sequence. Also photos will not move from grid to add to another collection.

Lightroom 4, photos are dark when in slideshow mode. Therefore, cannot create a slideshow. Cannot move photos from grid to add to another collection. Also cannot change sequence of photos. Have searched multiple times for troubleshooting help online with no resolution available.

Just to clarify my problem with the "dark photos"....when in slideshow mode, photos are dark and state "no photo selected" I've created multiple slideshows and this was never an issue. Just downloaded updates as well for Lightroom 4 and this didn't seem to help either.

Why are PDF and Image Files embedded in all sent mail messages?

When sending mail with either PDF or Image Files as attachments, the person receiving the message does get the attachment, but the files are also embedded in the mail message. This will display the image file below my text, however with a PDF, it's just trying to display as an image but is just lots of garbled characters. Word docs are not embedded, just attached. Any ideas how to prevent this? I'm attaching files by using the attach button and browsing for the file like normal. Thanks!

View menu (alt+V) > Display attachments inline.

Version Thumbnail are stretched and not sized correctly

In Aperture 1.5.6 -
I open a Nikon RAW (NEF) master in an external editor (Photoshop CS3)- and crop in Photoshop CS3. When I save the image - no matter what the shape of the crop - the thumbnail in Aperture does not change shape/size, but stretches/shrinks the image to fit the original size...
It happens after re-start, re-boot, in multiple libraries, ???.
Any idea how can I fix this?

Hi Jonathan,
we are using crystal reports 10 and when viewing this locally it is fine. However when we upload this to the server this is when the error occurs...
Although we have been using CR for many years this is the first time we have tried to publish a report within an .NET platform. I dont think my developer has installed anything from crystal specifically on the server - but maybe we need to install something? I did do some research on this and on all the help files I found there was no mention of having to install any CR parts on the server itself.
Would appreciate any help you can give.
One option I did think about was to install the full CR software on the web server to see if this made any difference.
Paul

E-mail and image display

Hi all,
I apologize if this is a repost, after using the search feature, I was unable to find a thread that answered my specific question.
I have had a BB 8330 Curve with the Verizon network for a few months now. At first, I was able to view images in e-mail. They wouldn't show up automatically, I would have to "Get Image" for each picture I wanted to see.
Now, mye-mail is formatted funny. Instead of an image, I just get "<http://blahblah.com/23.jpg>" I can no longer click "Get Image." Now it just says "Get Link".
I have tried: enabling HTML, disabling HTML, disabled Downloading images automatically, enabling them. Any troubleshooting tips would be greatly appreciated.
Thanks,
Zo

Just remove your mail ID from BIS integration and then re-integrate it again
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Ff4 tab group/panorama thumbnails are blank and I can't get to my tab sets!

I have four app tabs and then five sets of tabs. I opened FF with these groups. When I click the tab group icon, it brings up my groups. Each page in each group is blank. Until I click on it, there is no label. When I click, a white box comes up then contracts, back in to place. When it's back in place, the page title is listed, but the 'preview' is missing.
In no case can I get to a page that's not in the primary group.
I switched to FF4 so I wouldn't use my tabs, yet here I am losing tabs again.
Help

Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?
If the problem is gone;
Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
In the Add-ons Manager, on the left, select '''Extensions.'''
Disable a few add-ons, then '''Restart Firefox.'''
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
If the problem continues, disable some more (restarting FF). Continue until
the problem is gone. After, you know what group is causing the issue.
Re-enable the last group '''ONE AT A TIME''' (restarting FF) until the problem returns.
Once you think you found the problem, disable that and re-enable all the
others, then restart again. Let us know who the suspect is detective

I can add a description and it displays on a slideshow but when I sync it to the iPad the description does not display, Why?

I can add a description to a photo by clicking o the "i" and it will dsiplay on a slideshow but when I sync the album to my iPad the description does not disply, why?

I'd ask that on the iPad forum.

Thumbnails are not displaying in LR4.4 64bit on I7 laptop with 16gb ram

I cannot get thumbnails to display the image in library mode. I can click on develop on a particular blank thumbnail (blank thumbnails are dislayed and they are numbered).
What settings do I change? I am using an i7 laptop with 16gb ram. Wins 7.
Greg.

Calibrate your monitor.

HT201401 When I am having a text conversation some times my bubbles are blue and sometimes they are green-why is that

When I am having a text conversation sometimes my bubbles are blue and sometimes they are green -why is that

blue colored bubbles are imessages(ios device to ios device), uses data
green colored are SMS's(charged by carrier, if you have free SMS's, it should be free too)
learn more about imessages
http://www.apple.com/ios/messages/

When combine multiple PDFs into one, some letters are missing and display wrong letter

Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!

I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.

TS3092 My Apple bluetooth wireless keyboard caps lock keeps changing so that sometimes the caps are on when the lights on and sometimes the caps are on when the light is off. How do I control this?

My caps lock keeps changing. That is, sometimes the caps are locked and the light is on the key and sometimes the caps are on when the light is off. It changes without my knowing it. Also when I hold the shift key down I hear a double click noise which changes the keys in some way. How do I get it to not change?

Try resetting SMC and NVRAP and then reboot.
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/PH4405
Try booting the Recovery Partition. Power off, boot and then hold down the Command and R keys. Is the screen still black? If so it is not a software problem so take it in for diagnosis and repairs. Make a Genius Bar reservation http://www.apple.com/retail/geniusbar/ or find an Apple Authorized Service Provider https://locate.apple.com/country .
If you are running Mavericks try upgrading to 10.9.2. It has a fix for black screen problems.

What happened to my previews and images?

Calling all Wizards,
Was working in Lightroom 3.3 (64bit) on Windows 7 yesterday when all my previews and the Images went missing. The files and the catalogue entries are all still there (i.e. Metadata, keywords etc).
The thumbnails are grey and when you click on the image or try working in the developer module or any other for that matter, the image is grey. Zip, Zilch nudder.... or in polite english, no image.
I tried loading other catalogues, same issue.
I tried repairing Lightroom (i.e. re-install option), no change.
The only time I can see a thumbnail is in the import screen during a new import and there after, once the image is imported. No preview or image.
No luck at all trying everything I know to fix it.
Any help is really welcome.

Your monitor calibration profile may be corrupt.
For testing, please reset the profile to the systems default sRGB. If this helps, recalibrate your display.
HTH
Franz

PNG files are grainy when opened in Illustrator.

Files that I create in Photoshop and save as PNG files are grainy and colored incorrectly when opened in Illustrator. The files are fine when opened in other programs. Please see the pictures below to illustrate my point. These are the same file, however, the first is the PNG file that I've saved in Photoshop and the second is how Illustrator renders the file.
Original - Saved from Photoshop
Rendered in Illustrator. Exported as PNG.

It is PNG 24. It's super bizarre. I originally thought it was because the file began as a RAW file, but any file I export as a PNG gives me the same issue when opened in illustrator.

Sometimes PNG thumbnails are tiny and image displays tiny in slideshow

Similar Messages

Maybe you are looking for