Sometimes the screen on my iPhone 3GS appears enlarged, so I cannot see or manipulate the touch screen buttons. Anyone know what this is?

Sometimes the screen on my iPhone 3GS randomly enlarges so I cannot see or manipulate the touch screen controls. Anyone know what causes this?

Double tap with THREE fingers to turn zoom off. Then, go into Settings>General>Accessibility and turn it off for good.

Similar Messages

  • My battery seems to be making the computer hotter than before and it actually is too hot to keep on my lap.  Does anyone know what this means?.

    My computer seems to be much hotter lately when it is on my lap.  Does this ean I need a new battery or is there a problem with the computer?  Thanks.

    If your machine is noticeably hotter than you're accustomed to even when running on a hard, flat surface, have a look at this article:
    http://support.apple.com/kb/TS1473
    You may have something running in the background that's using a lot of processor cycles and heating things up unnecessarily (and running your battery down faster and making your fan(s) louder than usual).

  • I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
    If your iPhone was hacked/jailbroken the update restore the lock.

  • My iPhone will not respond to my touch.  Does anyone know what the problem might be or has anyone had this problem before?

    My iPhone will not respond to my touch.  Does anyone know what the problem might be or has anyone had this problem before?

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?

    I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?

    Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.

  • I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means.

    I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means. I'm confused because I don't have a camera hooked up to my computer.

    may you have directly imported clip to timeline without copying it to local drive..
    update project for links and check if missing clips are there..
    reconnect it if you have it on local drive..

  • There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...

    There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...

    abigailfromwaddell wrote:
    There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...
    You have activated rotation lock. Check the little switch near the volume control.
    Stedman

  • HT201210 It says my firmware file is not compatible after I tried to update my IPhone 4. Does anyone know what this means?

    Hello,
    I tried to download updates on my IPhone 4 and a message box appeared saying--after it downloaded the updates on my computer--that my firmware file is not compatible. Does anyone know what this means?
    Thank you

    Only the individual that set the restrictions passcode knows what it is.
    If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new.

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • TS3694 trying to restore my phone and error occurs with 1015 in the message anyone know what this is?

    bought a second hand iphone that worked fine untill i tried to restore to factory settings and put a simcard in. now tring to restore the software, but everytime it comes up with an error message half way through with the code 1015 on the end. anyone knows what this means??

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Has the firmware been modified before you updated the iOS? If yes, this error could be a result of a jailbreak.

  • I tried to start my computer and just have a white screen. Does anyone know what this might be?

    I tried to start my computer and just have a white screen. Does anyone know what this might be?

    Not good news. But you will need to be more descriptive. What version of OS X are you running? Did you do anything different prior to turning it off the time before this happened? Is their an Apple logo on the screen? Is there a spinning gear below the logo? What version of OS X was installed when the computer was new?

  • The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    Short answer:
    Click Hide Song(s), it is what you wanted to do...
    Long answer:
    iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
    If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
    Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
    To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
    tt2

  • Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

    Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • Trying to download OSX Mountain Lion, but just says waiting all the time? Anyone know what this could be?

    Trying to download OSX Mountain Lion, but just says waiting all the time? Anyone know what this could be?

    You are not specific with your problem or errors but one thing that always throws people off is as follows:
    When entering you're login name you must use the entire login with carrier name such as [email protected] The field defults to just your name but not the carrier name.

  • I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

    I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

    iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
    iOS: Supported Bluetooth profiles
    Basically it support headphones, keyboards, speakers, peer-to-peer gaming

Maybe you are looking for

  • How to import Document in a book

    I am using cs3 (Mac os x). I created a book using javascript and then i save it. app.books.add(myPath + Save + ".indb"); app.activeDocument.save(File(myPath + Save + ".indb"), false); My question is i need to add or import all the file into that book

  • EL won't work

    I downloaded JSTL from apache and put the jstl.jar and standart.jar in the WEB-INF/lib The tlds I put into WEB-INF/tld Now, I can import the tablib with <%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %> The tags are interpreted correct

  • Blue Yeti / Garage Band / MBP-retina / No audio upon second take.

    Hi: I have a 2012 MacBook Pro retina display (Build 12A269) running OSX 10.8.  In "Garage Band" I can record a track using the Blue Yeti with success.  Upon play-back of that track I hear no audio.  If I then unplug the Blue Yeti from the laptops USB

  • Windows and mac libraries

    Can windows itunes connect to a library on a mac shared drive? The windows version dosent seem to recognize the itunes folder on my external shared drive. I do not want to copy from one to the other. I want to be able to use both from the networked d

  • Sign out dowsn't work in this case .. any solution

    Hi I have a module called "main screen" that shows another modules in the system in <af:inlineFrame>. it has a login page and sign out commandNavigationItem. when user selects a mdoule from a tree in the main page the inlinframe loads the specified m