Somoen enter to my mac how can i know that or chick that plz
hi apple stor
there is someone enter to my mac and all my mial and naw i chhianch all emil can u told my how can i find that 1 how enter to my mac
Hi
These are the steps for syncing photos from laptop to iphone:
http://support.apple.com/kb/ht4236
As for the notes they sync to your mail you will want to check what account you are writing notes with on the iphone and then check that you are showing notes in mail preferences on the macbook. For example i create notes on my gmail account with are then synced and appear in my gmail inbox.
Hope this helps
Similar Messages
-
When Subscribing to my Newsletter through my IWeb website, one is entered in EVERY Category; how can I change that!? It's a convenient feature, to just pass out my biz card, and get newsletter subscribers. But they don't seem to be able to choose categories; I always get notifications that they have been subscribed to every category (including ones that don't appear as options when they subscribe through the newsletter server). HELP??
How do they subscribe?
Where is the newsletter?
Where or what is the newsletter server?
Where do they choose a category?
Specify.
Anyway, there is none in iWeb. -
HT4061 How can I know that my iPad is original or not?
How can I know that my iPad is original or not? If I can know, how?
Do you think it's a fake iPad?
Were you able to register it with no problems?
https://supportprofile.apple.com/MySupportProfile.do
Where did you buy it? Can you compare it with iPads at an Apple store or reseller? -
How can we know that size of dimension is more than fact table?
how can we know that size of dimension is more than fact table?
this was the question asked for me in interviewHi Reddy,
This is common way finding the size of cube or dimensions or KF.
Each keyfiure occupies 10 Bytes of memory
Each Char occupies 6 Bytes of memory
So in an Infocube the maximum number of fields are 256 out of which 233 keyfigure, 16 Dimesions and 6 special char.
So The maximum capacity of a cube
= 233(Key figure)10 + 16(Characteristics)6 + 6(Sp.Char)*6
In general InfoCube size should not exceed 100 GB of data
Hope it answer your question.
Regards,
Varun -
my iphone5s head phones got mixed up with my room mates headphones and i really want to know witch one is mine how can i know that please help !
I doubt there is you dropped it and broken the screen
try holding the top button and the round button at bottom of screen
hold both until maybe an Apple logo appears if nothing after 20 secs
the iPad is toast
It can be exchanged at an apple store for around $249 to $219 depending on model
Apple do not do repairs
I would own up now before it gets more complicated -
How can we know that JVM is running in our system?
how can we know that JVM is running in our system?
On a *dows system you can use pslist and the like:
http://www.sysinternals.com/Utilities/PsTools.html
http://www.sysinternals.com/Utilities/PsList.html -
How can I know that the listener is starting up?
Hi,
I follow the instruction in ACS Oracle Installation guide. I believe that many of you use the document to install oracle. I have a question when I try to start the listener. when I execute ./listener8i stop or ./listener8i start I got the same message, which is different from the message in the ACS document.
Here is the message:
Oracle 8i listener start/stop
Startting the Listener for 8i:
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 31-AUG-2000 14:00:00
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
TNS-01106: Listener using listener name LISTNENER has already been startd.
Is the message above correct? How can I know the listener is started up?
TIA,
Tonytry "lsnrctl status" on the linux command line.
for further info use "lsnrctl help" -
How can i know that my FPGA VI logic is placed correctly on the FPGA???
Helloo,
I am very new to LABVIEW and using LV8.0 version
I am using cRIO-9002, cRIO-9101 chassis, NI-9401 in slot1 of the chassis. I have written some simple VI which will take True or False as a input and based on that output will come as 12 or 3 respectively. I am writing this output at DIO[7:4] of NI-9401. My VI is running successfully , generating intermediate files and BIT file also. In the Front panel i am able to see correct output also. But when i see the output at the output pins of NI-9401, nothing was coming. I am attaching my file. In this i have used FPGA I/O node to write output on that pins of NI-9401. My Q is
1. Can i expect output pins of NI-9401??
2 . Is there anything is to be done or write anything interface VIs..etc are to be done to get the outputs.
3. My way of procedure is complete or not??
Help me in this issue plz.
Reagrds,
Ravi Kumar.
Attachments:
simpleAIAO.vi 38 KBHello Eli S,
But still i am not getting.
I am seeing voltage level at DIO pins of NI9401 as 0V only.
I observed that in MAX
Cofiguration >> my system >> software >> NI-VISA version is 4.1
and
Cofiguration >> remote system >> software >> NI-VISA version is 3.4.1
will it be a problem?? I am setting initial line direction as a output port in the project explorer NI9401 module and also set the line direction as a output in front panel.
Is there any chance of problem in hardware?? like connection between the FPGA(chassis cRIO9101) and NI9401??
how can i check that my hardware is working perfeclty??
I am thinking that the only way is what i am doing right now...like writing digital data to lines...will be a simple experiment to check my hardware.
Sorry, i may be wasting your time, but if I overcome this problem, i can start my application on cRIO which is bigger in logic.
Thank you very much.
Regards,
Ravi Kumar.
Attachments:
Digital Line Output.vi 269 KB -
i already downloaded whatsapp massenger at my I phone , but its not working coz they ask to enter code , how can i get this code plz
Ask the developers. It is not an Apple product.
-
How can i know that the application is written in a correct way???
Dear sirs...
it seems a little silly, but assume that i wrote an applicaion, how can i
1- be sure that its performance is good, i.e. did i designed the application to be fast?
2- if it is using SSL, how can i make sure the performance is high?
3- before the applicaion is installed should i use any specific tuning?
4- should i do some tuning to the database,& as? i know how to install the AS, & DB, and how to make the application work, but i want it to work as good as possible
thanks for any help & happy new year
regardsyou need load testing tool for that...
you can test your application with "Web Performance Trainer".. it supports ssl, multiple users (up to 5000 simultaneous), etc...
i use it and it is very good... anyway i havent try it with UIX only plain JSP but i think it shoud work with UIX too...
ofcourse you have to load database with lots of dummy records to have valid results...
my expirience is that for single standallone oc4j instance on heavy load maximum is 50-100 simultaneous users over ssl aes-256 (but load testing tool, oc4j and db are on the same computer which have only 2 GB of ram, and DB is only light loaded with with several hundred records, and each of those 50-100 concurent users have its own login name, each on its own separate SSL chanel.. so encryption load is really really heavy) on real deplyment system performance should be much much gerater, because DB, AS, and OC4J's should be on diferent machines each... -
How can i know that servers are up and running?
hello everyone...
i have a distributed application which does the following.. a client submits a job which is passed from one server to another and after some processing on each server the job is returned back to the client.. the thing is that i want to make the whole application more reliable... how can i found out if the next server that i am going to submit the job is up and running?
the client has decided the order of the servers that should be followed but when a server processes the job another one may "die..." and i am telling you that because i cannot check if the cast of the objectReference fails when i make the list on the client...
is there any function that i can call to the orb and find that out ?
thxxxxx
ps. i am using java and corba orbhmm... when i reproduce the situation i get the following
15 ─ίΆ 2006 2:39:47 ΉΉ com.sun.corba.se.impl.transport.SocketOrChannelConnection
Impl <init>
WARNING: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR
_TEXT; hostname: 10.34.153.11; port: 2945"
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(U
nknown Source)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(U
nknown Source)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(
Unknown Source)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(
Unknown Source)
at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.create
Connection(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.begin
Request(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(Unknow
n Source)
at org.omg.CORBA.portable.ObjectImpl._request(Unknown Source)
at WorkflowFramework._ServiceStub.translationService(_ServiceStub.java:1
8)
at wF.ServantEnglishToGreek.translationService(ServantEnglishToGreek.jav
a:294)
at WorkflowFramework._ServiceImplBase._invoke(_ServiceImplBase.java:41)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tchToServant(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispa
tch(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest
Request(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(U
nknown Source)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.call
back(Unknown Source)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest
(Unknown Source)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatc
h(Unknown Source)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(
Unknown Source)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.
run(Unknown Source)
Caused by: java.net.ConnectException: Connection refused: connect
at sun.nio.ch.Net.connect(Native Method)
at sun.nio.ch.SocketChannelImpl.connect(Unknown Source)
at java.nio.channels.SocketChannel.open(Unknown Source)
at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket
(Unknown Source)
... 19 more
NEXT SERVER IS DOWN! org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201
completed: Noi added to my code the following catch
try{
//call next server
nextServerRef.translationService(objRef, buffer);
catch(org.omg.CORBA.COMM_FAILURE o){
System.out.println("NEXT SERVER IS DOWN! "+o);
}it is obvious that i haven't worked with exceptions a lot rather than some standard things.. which are the exact exceptions that i should catch and how??
thx again!!
Message was edited by:
panosjava -
HT201303 I've forgotten my Sicutiry questions! How can I know that again???
I bought a new computer, So I Need to confirm my account with the sicurity questions, but I forgot those! So, how can I get again??? Cause I put credits on the iTunes and can't buy anything! Help please...
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team. -
How can I know that record(s) are locked?
Hi,
I am querinh the table for updating.
How can I check particular record or set of records if those records are locked?
Any help are welcome.
Thank you.
DmitryPlease add some details:
- Locked with what, locked with search my iPad?
- Do you mean just normal locked (with a code/password every time you want to use your iPad)? -
How can i know that the material already deleted ?
Hello,
I'm new in SAP and need a help. In PP if an material is deleted or changed, it is marked as X in the xloek field of the RESB table. And when the order is TECO'd all the materials X'ed as weel. So how can i distinguish a deleted material in the order from the others? Please help.
Thanks in advance.
EmreHi,
I think I've found the answer and i want to share.
First i take the object number of the material from the RESB table with the objnr field.
Then look the JCDS table with that value. If an object exist with I0013 status and inact field
is not X, it is really deleted.
My query is
select single * from JCDS where objnr = resb-objnr
and stat = 'I0013'
and inact <> 'X'.
The statues can be seen the transaction bs22. -
How can I know that nocopy is worked?
how
793769 wrote:
There is OLTP system and many inserts. I'm going to remove logic from trigger into the package.
I want to know, that in parameter <record of (f1 ..%type, f2 ..%type,)>whether will be work in nocopy mode.I don't think anyone here has a webcam into your system. All we can tell from what you've written so far is that you have some code in a trigger and you want to put that code in a package and you want to know if something you are doing there will work.
All of the crystal balls are out for repair.
Maybe you are looking for
-
Trying to install Windows 7 or 8 on old MBP
Hi all i've tried for 6 hrs today... no way out. I'm trying to revamp an old MBP Core Duo 2,1 Ghz, with Windows 7 (or 8.1, it's the same). Downloaded both ISO version of Windows installer. - Tried with USB stick -> Non-system disk error - Tried with
-
Hi, I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have
-
Questions about a custom login page.
Could someone give me an example of a custom login page that does the error checking with p_error_code. I can't seem to get one to work correctly. I don't ever get any info in p_error_code when there is an error in login. You can email me the code at
-
Safari having a problem and quitting.
safari keeps shutting down unexpectedly. it keeps erroring and then quitting, giving me the option of reporting the error to apple and reopening and i think just quitting. i've reported it to apple many times...but i doubt that does anything. i just
-
TS1717 DEP shuts down program when i store is entered
DEP shuts down program when i store is entered