SONAR problem/ playback is record

I am running SONAR Producer 3 on Windows XP. The problem is, the playback is being recorded along with my new track. This is not good! I have tried turning down the "Record What You Hear" option, but then I cannot hear my input signal or playback.I have never had a problem with SONAR, but this is a new hard dri've, new soundcard and new version of SONAR. I have tried turning down the "Record What You Hear." I also?have tried routing?the signal back to the mixer and monitoring from there. Both did not solve the problem.Hardware:Nord keyboard into Behringer mixer, into Soundblaster Audigy 4 soundcard. I monitor through the?headphone jack on the soundcard?only; there are?no speakers hooked up to the system.If this?makes any sense?to you, pease help!
Thanks a lot.Message Edited by j4jupiter on 0-30-200609:32 AM

Hi, cheers for the info...
I gave it a go, but its still the same.
If after i record i open the matrix editor, all the notes have been shortened to the shortest possible. So all you hear is a very short blip instead of the full length.
At the moment im having to lengthen each note in the matrix editor.
Being new to this i don't know what ive changed if anything for this to happen.
Cheers........

Similar Messages

CPU overload during playback and record

This happens here and there but is not a consistent problem, and for that reason I feel that it can be corrected. Out of the blue, during playback or record, all of the sudden my CPU meter will start spiking and the audio will start getting interrupted until it just gives up and I get a dialogue box saying overload. I always make sure all other applications are closed to avoid this. What else can I do?

1. Have an empty Audio Track selected during playback (= no need for Logic to wait for realtime MIDI input)
2. Increase Audio Buffer
3. Turn off "safety" buffer. "safety" is very misunderstandig... In fact, it makes things unsafer in terms of playback stability. (BTW: Did anyone find out which "safety" is meant, anyway?)
4. Turn off Airport, go offline, turn off antivirus and such things. Just let Logic be the only big application running.
5. After some playbacks, the caches should provide enough information so that Logic runs more smooth than with the first playback. So - if you need Logic as live tool, let it play the project once or twice before.
Fox

Disabling Sound Devices (Playback and Recording) via Group Policy?

Good day,
I am using an HT-Omega Claro II soundcard which has multiple playback and recording options once installed. For this specific configuration, I want to be able to disable all the unwanted options (including things like the standard PC speakers) in such a
way that only an administrator can make modifications to the available devices. Is there a way to do this via a GPO? I know that via the Sound control panel I can (and have) disable the options I do not want to be available, but there are some users who are
saavy enough to be able to find them and re-enable, which is creating problems for some of the applications that need to be used.
Any input on how to rectify this is greatly appreciated.

I dont think there are sound specific GPO's. If you want to disable the sound, you can disable the sound service from GPO :
Computer Configuration\Policies\Windows Settings\Security Settings\System Services\Windows Audio
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Problems importing HD recording from Sony HD-HCR3

Apologies but I am new to this!
I just bought the Sony HCR3 - when I try to import (via Firewire) HD movies, the picture is very jumpy, single clips are getting broken up and the audio is distorted (voice sounds an octave lower) even though the playback on the camcorder is fine. I don't have any problems when I record and import in DV format.
I have upgraded to iMovie 6, but have yet to upgrade from 10.3.9 (which means that some features of iMovie HD don't work). Is this the reason for my problem?
Thanks in advance for any advice.
iMac G5 Mac OS X (10.3.9)

Well, I have a similiar problem with the Sony HDR-HC1E.
The imported movie ist too slow, so it sounds an octave lower. This problem occures on my powerbook g4 and on my powermac g5. There are no problems with imovie 5.
Nobody could tell me why this problem occures....
You should go bac to imovie 5. iDVD 6 has also some problems.
Sincerely....

Problem with cycle recording

Greetings, folks. I've run into what I think is an odd problem in cycle recording in an audio track. What I wanted to do was to automatically record multiple takes of a guitar solo. Consulting the manual and both the LP7 and Advanced LP7 guides and set up what I thought was the proper configuration for doing that: under File > Song settings > Recording, I checked the "Auto mute" and "Auto Create Tracks in Cycle Record" checkboxes, I defined a cycle region, I defined a shorter autodrop zone within that cycle region, armed the track, then hit record. I thought that Logic would then create a new track with each cycle pass while I was playing, and that those tracks would play through the audio object of the track that had been armed for recording.
What happened instead was that, after a single pass, recording would switch off (though it would continue to cycle in playback), so that in order to record multiple passes I needed to stop, reset the track to the beginning of the cycle region, and then hit record again. The audio regions I recorded on successive takes also don't display on individual tracks. I'd like to be able to see them all in the arrange window and be able to play them through the original track's audio object for editing purposes, but I can't figure out how to do that either (without creating multiple tracks and then manually dragging each take from the audio window).
So I guess I have two questions: first, what did I do wrong in attempting to cycle record, and then how can I view all of the individually recorded takes in the arrange window?
Thanks,
Trent

Jord, when I called it a "phenomenon" I did not mean to describe it as a bug or fault - you're right, it is a desireable feature of cycle recording.
As far as your question goes: Suppose you are recording track-by-track a song with two parts, an acoustic guitar and vocals, and the acoustic guitar part has an intricate eight-bar solo that needs to be redone. The advantage of using cycle recording and autodrop here is that you could define a cycle region giving you a two-bar intro (say) to the part you need to rerecord and a couple of bars of outro, making it easier to accomplish a musical phrasing. For example, say you're a vocalist trying to record a one-octave scale, and your pitch is off on the "fa-so." With cycle recording and autodrop, you could sing along with the "do-re-mi" and settle your pitch before rerecording the notes you flubbed, whereas (as I understand it) if you're just rerecording the "fa-so" in cycle mode, you won't get the "do-re-mi" as an intro after the first pass and would then just hope that you're nailing the notes you need to rerecord cold.
You can combine cycle recording with autodrop in Midi - why not in audio? It's a desireable feature in both.

Problem in BDC Recording

Hi I am having a problem in BDC Recording. My requirement is that when I input data in transaction fb02 to block the invoices, It shows a list of invoices. Now i need to double click that item(line) in which PK = 06 at runtime during bdc recording. During BDC recording it takes the line number on which we have clicked which is constant but i want it dynamic that if item 1 is having PK=6, that line should be double clicked and if item 3 is having PK=6, the third item should be double clicked to open another screen. Kindly help me... Thanks in advance.

Hi Ravi,
While writing your code that is in your code you know which line number is having the PK = 06, then you can use the same line number and add the code for double click after that.
Regards,
Atish

TS1559 I bought my iphone 4s in usa apple store but when i write my serial number to support center i see warning like that. What is the problem ? Our records indicate that this product has been replaced. Please provide the serial number for your replacem

I bought my iphone 4s in usa apple store
ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
i want to support for this issue.
but when i write my serial number to support center i see warning like that. What is the problem ?
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

Nobody here would know. Contact Apple and ask them

Performance problem with selecting records from BSEG and KONV

Hi,
I am having performance problem while selecting records from BSEG and KONV table. As these two tables have large amount of data , they are taking lot of time . Can anyone help me in improving the performance . Thanks in advance .
Regards,
Prashant

Hi,
Some steps to improve performance
SOME STEPS USED TO IMPROVE UR PERFORMANCE:
1. Avoid using SELECT...ENDSELECT... construct and use SELECT ... INTO TABLE.
2. Use WHERE clause in your SELECT statement to restrict the volume of data retrieved.
3. Design your Query to Use as much index fields as possible from left to right in your WHERE statement
4. Use FOR ALL ENTRIES in your SELECT statement to retrieve the matching records at one shot.
5. Avoid using nested SELECT statement SELECT within LOOPs.
6. Avoid using INTO CORRESPONDING FIELDS OF TABLE. Instead use INTO TABLE.
7. Avoid using SELECT * and Select only the required fields from the table.
8. Avoid nested loops when working with large internal tables.
9. Use assign instead of into in LOOPs for table types with large work areas
10. When in doubt call transaction SE30 and use the examples and check your code
11. Whenever using READ TABLE use BINARY SEARCH addition to speed up the search. Be sure to sort the internal table before binary search. This is a general thumb rule but typically if you are sure that the data in internal table is less than 200 entries you need not do SORT and use BINARY SEARCH since this is an overhead in performance.
12. Use "CHECK" instead of IF/ENDIF whenever possible.
13. Use "CASE" instead of IF/ENDIF whenever possible.
14. Use "MOVE" with individual variable/field moves instead of "MOVE-
CORRESPONDING" creates more coding but is more effcient.

Problem in displaying records in multi record block

Hi all,
I have a problem in displaying records in a multi record block in a form.
I have 1 control block and 1 data block(multi-record block).
Control block has one item CUSTOMER-ID. Data block has many other items related to customer.
when a value is entered in customer-id text item, all the relavant details should be displayed in the data block.
but, the records are overlapping in the same line in the data block, actually they have to be displayed one record per one line.
The code is,
IF :CUST_BLOCK.CUST_ID IS NOT NULL THEN
GO_BLOCK('XBSI_CONTRACT_PRICE_FACTORS');
FOR C1 IN C
LOOP
:XBSI_CONTRACT_PRICE_FACTORS.CUST_ID:=c1.site_use_id;
:XBSI_CONTRACT_PRICE_FACTORS.CAT_ID:=c1.ipc_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.MFG_ID:=c1.mfg_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.INVENTORY_ITEM_ID:=c1.inventory_item_id;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_BASIS:=c1.price_basis;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_FACTOR:=c1.price_factor;
END LOOP;
Please help me out..
Thanks in advance!
Suman

Hi Suman
IF :CUST_BLOCK.CUST_ID IS NOT NULL THEN
GO_BLOCK('XBSI_CONTRACT_PRICE_FACTORS');
first_record;
FOR C1 IN C
LOOP
:XBSI_CONTRACT_PRICE_FACTORS.CUST_ID:=c1.site_use_id;
:XBSI_CONTRACT_PRICE_FACTORS.CAT_ID:=c1.ipc_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.MFG_ID:=c1.mfg_category_id;
:XBSI_CONTRACT_PRICE_FACTORS.INVENTORY_ITEM_ID:=c1.inventory_item_id;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_BASIS:=c1.price_basis;
:XBSI_CONTRACT_PRICE_FACTORS.PRICE_FACTOR:=c1.price_factor;
next_record;
END LOOP;
Try this. you are trying to show all the records in same line. so its overlapping.
Thankyou
[email protected]

Problems with ECATT recording using SAPGUI Record

Hello,
I got a problem with my recording. All the prerequisites are done. The problem is, that when the recording is done i don't see the recording in SECATT testcase. Normally when you do a recording you see at the bottom right of the gui a red/white icon active. When i do a recording now, this red/white icon isn't active.
For my it's a very strange error. I hope somebody can give me a hint where i can look,
Thanks in advance.
Kind regards,
Maarten.

Maarten,
First when you start the recording using SAPGUI, you will get the pop-up whether to record this new session. You need to select Yes before continuing your recording.
Secondly check the scripting values in the target system whether it is enabled or disabled using the RZ11 transaction. Mostly SAP Basis team have authorization to change these values for us.
Here is the parameter we need to check in RZ11 - sapgui/user_scripting. It should be TRUE.
Let me know if this helps.

Problem in selecting records

Hi, everyone.
I have a problem in selecting records. In this case, I want to select records from database
LFA1,and the components of this table are LIFNR,ERDAT,LOEVM ,and so on.The type of LIFNR is char(10).There is a internal table:tab_cdhdr , the elements of tab_cdhdr are: objectid,udate and change_ind.The type of objectid is char(50).
And the select-rule is that: LIFNR = objectid. So I write like this:
select   lifnr
             erdat
             loevm
form     lfa1
into       tab_lfa1
for all entries in tab_cdhdr
where   lfa1 = tab_cdhdr-objectid+0(10).
But there is a warning: When using FOR ALL ENTRIES IN the specifyed length for "OBJECTID" is ignored in this condition.
Can you help me to solve this problem?
Thanks.

Hi Feng..
If you dont want to change the Internal table TAB_CDHDR, Then declare another internal table (TEMPTAB_CDHDR.) with the same structure but Objectid with only 10 chars.
IF TAB_CDHDR[] IS NOT INITIAL.
LOOP AT TAB_CDHDR.
MOVE-CORRESPONDING TAB_CDHDR TO TEMPTAB_CDHDR.
APPEND TEMPTAB_CDHDR.
ENDLOOP.
select lifnr
erdat
loevm
form lfa1
into tab_lfa1
for all entries in tab_cdhdr
where lfa1 = TEMPtab_cdhdr-objectid.
ENDIF.
Sure ... this will work for u.....
REWARD IF HELPFUL.

I have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

i have an ipod touch 4th genereation and have problems when i record you can barley hear the voices and sounds recording i don't know what the problem is?

sounds like ur ipod's mic is blocked with something check the back on the ipod near the back camera

Audition CC randomly loses playback and recording functionlity

Any help with this issue would be great. I'm using Adobe Audition CC and after a few minutes the playback and recording functionality lock up. I'm still able to edit and save as nomal, but that's it. When i hit 'play' the icon lights up as if it's playing but the playhead doesn't move.
if I click away and allow the program a few minutes of running in the background, sometimes, functionality returns,

Thanks for the reply. I'm still experiencing the issue, but I think I'm a bit closer to understanding it. The Yeti has built in drivers meant to work with the windows MME drivers, but the Yeti Pro requires it's own drivers to be downloaded from Blue's website. Unfortunately for me, the Yeti Pro comes in two subtly different models. One that works with the Blue mic Yeto drivers (identified by the letters USB printed by the usb output) and one that Yeti prescribes the TUSB 1.22.0 drivers (the version I have that is absent of the lettering). I believe herein lies my issue. The TUSB drivers are rubbish.
I've since turned off windows sounds and experimented with ASIO4All. Still with interupted recordings and playback. I've got a ticket in with Blue and am going to see if they have a program that lets me swap this TUSB version for their version that uses the proper Yeti Drivers. ASIO4All doesn't identify the mic unless the TUSB drivers are installed, so it seems like for now I'm stuck with them.

Having Monitoring Problems with in Adobe Audition using built in outputs No playback while recording?

I was using Adobe audition to Record Audio and some how the output throught the hardware settings got changed to airplay. Now even if I change the settings to built in output the is no playback through the computer speakers!! aAny Help would be great! I Put this quesion in the Adobe Forums as well. Just thought I might get some help here quicker. Thanks for your time.

"This program is too expensive to have such an amateur limitation."
To help you, Eric.. this is a conclusion to the question the precedes it. I never blamed the program for my lack of knowledge. I wouldn't waste my time in a message board asking how to accomplish a task if I felt it was impossible.
And, Arrogance? The extent of my description was to prevent people from responding with suggestions I've already tried. The second response fixed the problem (not the first, mind you) so it seems my message suited the situation... and no others found the need to tell me I was the problem.
MY attitude is in response to YOUR arrogance. After asking a friendly question, you respond with the limitation only being mine, but there is also a limitation with the software. Contradictory? I see you have a reputation to uphold, and now understand the driver that came with Audition does have limitation. It's nice to see you have people that give you credit, because your posts merely tell me that (1) I don't know what I'm doing .. and (2) Yeah, Audition has the limitation you need help getting around.
Well thanks for your help. My first and last point is why you find the need to tell people they don't understand something, when that's clearly why they've come to you and your peers. You'd make a great firefighter -- showin' up with flashing lights, to deliver the news to people that they don't know how to work an oven.

CS6 Windows 8.1 Playback and Recording errors

We are running Audition CS6 on newer Windows 8.1 computers, using the internal sounds cards to eliminate any USB or driver issues as culprits. Here is a breakdown of our problems:
When opening a file from an external program, Audition will not play back the file. Previously, when opening the file, it would start playback immediately.
After launching a new instance of Audition, the program will not record after hitting the record button. It will open a new file like it did before but will not begin the recording process***We have a work around in which you deselect and select the sound cards and restart Audition. Works but not to the best of it's ability.
When switching users, the default sound devices will change.
Each of these problems happen sporadically with no real pattern. We did not experience these issues at all on Windows 7.
Thoughts?

CCSDSoftware wrote:
We did not experience these issues at all on Windows 7.
Thoughts?
I'm trying my best here, but you are making it really difficult...

SONAR problem/ playback is record

Similar Messages

Maybe you are looking for